How can I outputthis table exactly like that in LaTeX?
I'm using the latest versions of WindEdt and LaTeX.
Thank you.
I've been trying to reproduce exactly the same, as simply as possible.
The code:
\documentclass{article}
\begin{document}
%\begin{table}
\begin{tabular}{|c|c|c|c|c|c}
\multicolumn{1}{c}{ } & \multicolumn{1}{c}{ } & \multicolumn{1}{c}{ } & %
\multicolumn{1}{c}{X2} & \multicolumn{1}{c}{ } & \multicolumn{1}{c}{ }\\
\cline{1-5}
\textbf{12} & \textbf{9} & \textbf{4} & \textbf{0} & \textbf{7} & X3\\
\cline{1-5}
\textbf{11} & \textbf{10} & \textbf{5} & 0 & \textbf{5} & X1\\
\cline{1-5}
7 & 9 & 9 & 6 & \textbf{0} & \\
\cline{1-5}
\textbf{0} & 3 & 10 & \textit{13} & 9 & \\
\cline{1-5}
5 & \textbf{0} & 0 & \textit{4} & 9 & \\
\cline{1-5}
\end{tabular}
%\end{table}
\end{document}
produces this output:
Don't hesitate to comment if you need further explaination.
Just use tabular with 6 columns and the command \multicolumn to control vertical bars:
\begin{tabular}{|c|c|c|c|c|c}
\multicolumn{3}{c}{} & \multicolumn{1}{c}{X2} \\
\cline{1-5}
12 & 9 & 4 & 0 & 7 & X3\\
\cline{1-5}
% and so on ...
\end{tabular}
Related
I have a table in latex. here is the code for it. My problem is the table is huge and and the content of it is not clear. My paper texts are shown in two columns and the table locates in one of those columns. I appreciate if anyone can help me how can I make the table content more clear for example is it good to expand it in a new page?
\begin{table}[]
\centering
\caption{Comparing accuracy of }
\label{table1}
\resizebox{\columnwidth}{!}{%
\begin{tabular}{|cccccccccccc|}
\hline
\rowcolor[HTML]{C0C0C0}
\multicolumn{12}{|c|}{\cellcolor[HTML]{C0C0C0}out\_1} \\ \hline
\rowcolor[HTML]{00D2CB}
\multicolumn{1}{|c|}{\cellcolor[HTML]{00D2CB}} & \multicolumn{1}{c|}{\cellcolor[HTML]{00D2CB}} & \multicolumn{5}{c|}{\cellcolor[HTML]{00D2CB}Accuracy result} & \multicolumn{5}{c|}{\cellcolor[HTML]{00D2CB}Precision result} \\ \hline
\rowcolor[HTML]{C0C0C0}
\multicolumn{1}{|c|}{\cellcolor[HTML]{C0C0C0}row} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}Train-Test percentage} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}TP} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}FP} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}FN} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}TN} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}Accuracy} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}TP} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}FP} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}FN} & \multicolumn{1}{c|}{\cellcolor[HTML]{C0C0C0}TN} & Accuracy \\ \hline
\multicolumn{1}{|c|}{1} & \multicolumn{1}{c|}{10-90} & \multicolumn{1}{c|}{17508} & \multicolumn{1}{c|}{5433} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{35961} & \multicolumn{1}{c|}{0.907638771} & \multicolumn{1}{c|}{18715} & \multicolumn{1}{c|}{4226} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{35961} & 0.928127652 \\ \hline
\multicolumn{1}{|c|}{2} & \multicolumn{1}{c|}{20-80} & \multicolumn{1}{c|}{17313} & \multicolumn{1}{c|}{5433} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{29610} & \multicolumn{1}{c|}{0.896092735} & \multicolumn{1}{c|}{18476} & \multicolumn{1}{c|}{4270} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{29610} & 0.918302651 \\ \hline
\multicolumn{1}{|c|}{3} & \multicolumn{1}{c|}{30-70} & \multicolumn{1}{c|}{17097} & \multicolumn{1}{c|}{5433} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{23281} & \multicolumn{1}{c|}{0.881250136} & \multicolumn{1}{c|}{18223} & \multicolumn{1}{c|}{4307} & \multicolumn{1}{c|}{8} & \multicolumn{1}{c|}{23281} & 0.905825094 \\ \hline
\multicolumn{1}{|c|}{4} & \multicolumn{1}{c|}{40-60} & \multicolumn{1}{c|}{16587} & \multicolumn{1}{c|}{5429} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{17256} & \multicolumn{1}{c|}{0.86171513} & \multicolumn{1}{c|}{17760} & \multicolumn{1}{c|}{1255} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{17256} & 0.891582217 \\ \hline
\multicolumn{1}{|c|}{5} & \multicolumn{1}{c|}{50-50} & \multicolumn{1}{c|}{16155} & \multicolumn{1}{c|}{5428} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{16942} & \multicolumn{1}{c|}{0.834056465} & \multicolumn{1}{c|}{17338} & \multicolumn{1}{c|}{4245} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{11142} & 0.870202884 \\ \hline
\multicolumn{1}{|c|}{6} & \multicolumn{1}{c|}{60-40} & \multicolumn{1}{c|}{15654} & \multicolumn{1}{c|}{5416} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{5109} & \multicolumn{1}{c|}{0.793025891} & \multicolumn{1}{c|}{16817} & \multicolumn{1}{c|}{4253} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{5109} & 0.837445573 \\ \hline
\multicolumn{1}{|c|}{7} & \multicolumn{1}{c|}{70-30} & \multicolumn{1}{c|}{14240} & \multicolumn{1}{c|}{8977} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0.725161685} & \multicolumn{1}{c|}{15373} & \multicolumn{1}{c|}{4264} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & 0.782858889 \\ \hline
\multicolumn{1}{|c|}{8} & \multicolumn{1}{c|}{80-20} & \multicolumn{1}{c|}{9340} & \multicolumn{1}{c|}{3752} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0.713412771} & \multicolumn{1}{c|}{9502} & \multicolumn{1}{c|}{3950} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & 0.72578676 \\ \hline
\multicolumn{1}{|c|}{9} & \multicolumn{1}{c|}{90-10} & \multicolumn{1}{c|}{4736} & \multicolumn{1}{c|}{1809} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0.723605806} & \multicolumn{1}{c|}{4766} & \multicolumn{1}{c|}{1223} & \multicolumn{1}{c|}{0} & \multicolumn{1}{c|}{0} & 0.722993452 \\ \hline
\end{tabular}%
}
\end{table}
The table in the paper is shown like the following:
I edit my code according to what you have written,
\usepackage{array}
\usepackage{booktabs}
\usepackage{threeparttable}
\usepackage{siunitx}
\usepackage{float}
\usepackage[margin=1in]{geometry}
\sisetup{
table-format=1.3,
round-mode = places,
round-precision = 3,
}
\begin{table*}[ht]
\renewcommand*{\arraystretch}{1.1}
\centering
\begin{threeparttable}
\caption{Comparing accuracy}\label{tab:table}
\begin{tabular}{c #{\hspace{12pt}} *5{c} S #{\hspace{12pt}} *4{c} S #{\hspace{6pt}}}
\toprule
\multicolumn{12}{c}{out\_1} \\
\cmidrule(lr){1-12}
& & \multicolumn{5}{c}{Accuracy result}
& \multicolumn{5}{c}{Precision result} \\
\cmidrule(lr){3-7}\cmidrule(r){8-12}
& TTP\tnote{1} & TP & FP & FN & TN & {ACC\tnote{3}} & TP & FP & FN & TN & {ACC\tnote{3}} \\
\midrule
1 & 10-90 & 17508 & 5433 & 8 & 35961 & 0.907638771 & 18715 & 4226 & 8 & 35961 & 0.928127652 \\
2 & 20-80 & 17313 & 5433 & 8 & 29610 & 0.896092735 & 18476 & 4270 & 8 & 29610 & 0.918302651 \\
3 & 30-70 & 17097 & 5433 & 8 & 23281 & 0.881250136 & 18223 & 4307 & 8 & 23281 & 0.905825094 \\
4 & 40-60 & 16587 & 5428 & 3 & 17256 & 0.86171513 & 17760 & 4255 & 3 & 17256 & 0.891582217 \\
5 & 50-50 & 16155 & 5428 & 3 & 11142 & 0.834056465 & 17338 & 4245 & 3 & 11142 & 0.870202884 \\
6 & 60-40 & 15654 & 5416 & 3 & 5109 & 0.793025743 & 16817 & 4253 & 3 & 5109 & 0.837445573 \\
7 & 70-30 & 14240 & 5397 & 0 & 0 & 0.725161685 & 15373 & 4264 & 0 & 0 & 0.782858889 \\
8 & 80-20 & 9340 & 3752 & 0 & 0 & 0.713412771 & 9502 & 3590 & 0 & 0 & 0.72578674 \\
9 & 90-10 & 4736 & 1809 & 0 & 0 & 0.723605806 & 4732 & 1813 & 0 & 0 & 0.722994652 \\
\bottomrule
\end{tabular}
\par\tnote{1} Test Train Percentage
\par\tnote{2} Accuracy
\end{threeparttable}
\end{table*}
\end{document}
You just have to make sure tables aren't too wordy; "the long" column names and insane number of decimal places are mostly the culprits!
I managed to fit the table within a page of a regular two column document. However, I changed some names to acronyms and added annotation to explain what they represent. I also reduced accuracy to 3 decimal places (I don't think you need more than 2).
There are a few additional packages in the code
siunitx to round some numbers
threeparttable to split the table into three parts: a caption, the main table, footnotes (*)
booktabs for much better rules (**).
* If you insist on using colours, then you will have to get back to regular \hline due to gaps between background colours and rules defined by booktabs. I think a well designed table doesn't need colours
** The caption width will be reduced to the width of your table, which IMO has much better effect; move caption outside the threeparttable if you prefer captions to have the full page width .
Here's the result with dummy texts
and code
\documentclass[twocolumn]{article}
\usepackage{array}
\usepackage{amsmath}
\usepackage{booktabs}
\usepackage{threeparttable}
\usepackage{siunitx}
\sisetup{
table-format=1.3,
round-mode = places,
round-precision = 3,
}
\usepackage{kantlipsum}
\pagestyle{empty}
\begin{document}
\section{One}
\kant[1-2]
\begin{table*}
\renewcommand*{\arraystretch}{1.1}
\centering
\begin{threeparttable}
\caption{Comparing accuracy}\label{tab:table}
\begin{tabular}{c #{\hspace{12pt}} *5{c} S #{\hspace{12pt}} *4{c} S #{\hspace{6pt}}}
\toprule
\multicolumn{12}{c}{out\_1} \\
\cmidrule(lr){1-12}
& & \multicolumn{5}{c}{Accuracy result}
& \multicolumn{5}{c}{Precision result} \\
\cmidrule(lr){3-7}\cmidrule(r){8-12}
& TTP\tnote{1} & TP & FP & FN & TN & {ACC\tnote{2}} & TP & FP & FN & TN & {ACC\tnote{2}} \\
\midrule
1 & 10-90 & 17508 & 5433 & 8 & 35961 & 0.907638771 & 18715 & 4226 & 8 & 35961 & 0.928127652 \\
2 & 20-80 & 17313 & 5433 & 8 & 29610 & 0.896092735 & 18476 & 4270 & 8 & 29610 & 0.918302651 \\
3 & 30-70 & 17097 & 5433 & 8 & 23281 & 0.881250136 & 18223 & 4307 & 8 & 23281 & 0.905825094 \\
4 & 40-60 & 16587 & 5428 & 3 & 17256 & 0.86171513 & 17760 & 4255 & 3 & 17256 & 0.891582217 \\
5 & 50-50 & 16155 & 5428 & 3 & 11142 & 0.834056465 & 17338 & 4245 & 3 & 11142 & 0.870202884 \\
6 & 60-40 & 15654 & 5416 & 3 & 5109 & 0.793025743 & 16817 & 4253 & 3 & 5109 & 0.837445573 \\
7 & 70-30 & 14240 & 5397 & 0 & 0 & 0.725161685 & 15373 & 4264 & 0 & 0 & 0.782858889 \\
8 & 80-20 & 9340 & 3752 & 0 & 0 & 0.713412771 & 9502 & 3590 & 0 & 0 & 0.72578674 \\
9 & 90-10 & 4736 & 1809 & 0 & 0 & 0.723605806 & 4732 & 1813 & 0 & 0 & 0.722994652 \\
\bottomrule
\end{tabular}
\par\tnote{1} Test Train Percentage
\par\tnote{2} Accuracy
\end{threeparttable}
\end{table*}
\kant[3-5]
\section{Two}
\kant[1-2]
\end{document}
Update
In order to achieve top alignment of a float on a single empty page, add the following to your preamble
\makeatletter
\setlength\#dblfptop{0pt}
\makeatother
I have a table that I would like to split over pages, but I can't seem to figure out how I can do it with my current lay-out or commands that I use.
At this time, I used landscape and minipage so that it would fit on one page:
\documentclass[11pt]{article}
\usepackage{pdflscape}
\usepackage{longtable}
\usepackage{lipsum}
\usepackage{bm}
\usepackage{makecell}
\begin{document}
\begin{landscape}
\centering
\begin{table}[!htb]
\caption{\label{CH2_tab:P80L} Empirical power from the simulation study with the indicators having an overall reliability of 80\% and a linear relationship with the latent variable. The highest power per setting is indicated in bold.}
\renewcommand{\arraystretch}{1.5}
\begin{minipage}{.5\linewidth}
\centering
\medskip
\scalebox{0.45}{
\begin{tabular}{rcccccc}
\hline
& \multicolumn{6}{c}{\textbf{Linear}} \\
\cline{2-7}
& \makecell{\textbf{WMW -- max rel} } & \makecell{\textbf{WMW -- mean }} & \makecell{\textbf{\textit{t} test -- max rel }} & \makecell{\textbf{\textit{t} test -- mean }} & \makecell{\textbf{SEM} } & \makecell{\textbf{SEM -- corrected}} \\
\hline
\multicolumn{7}{l}{$\mathcal{N}(0,1)$} \\
\multicolumn{7}{l}{\bm{$m=n=15$}} \\
\hline
Setting 1 & 29.7 & 31.0 & \textbf{33.2} & 32.9 & 32.4 & 32.1 \\
Setting 2 & 28.4 & 29.2 & 30.7 & \textbf{31.3} & 30.0 & 30.3 \\
Setting 3 & 29.5 & 29.3 & 31.8 & \textbf{32.3} & 32.0 & 31.9 \\
Setting 4 & 25.8 & 26.2 & 28.5 & 27.4 & \textbf{29.4} & 28.6 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=50$}} \\
\hline
Setting 1 & 78.7 & 79.1 & 81.7 & 81.4 & \textbf{83.2} & 83.1 \\
Setting 2 & 79.5 & 78.8 & 81.0 & 80.4 & 82.0 & \textbf{82.1} \\
Setting 3 & 79.2 & 79.9 & 81.2 & 81.8 & \textbf{82.2} & 82.0 \\
Setting 4 & 74.8 & 72.3 & 77.6 & 74.4 & \textbf{80.0} & \textbf{80.0} \\
\hline
\multicolumn{7}{l}{\bm{$m=n=100$}} \\
\hline
Setting 1 & 98.2 & 98.1 & 98.5 & 98.6 & \textbf{98.7} & \textbf{98.7} \\
Setting 2 & 97.7 & 97.7 & 98.2 & \textbf{98.3} & \textbf{98.3} & \textbf{98.3} \\
Setting 3 & 97.6 & 97.5 & 98.1 & \textbf{98.2} & \textbf{98.2} & \textbf{98.2} \\
Setting 4 & 97.4 & 95.1 & 98.1 & 95.8 & 98.1 & \textbf{98.2} \\
\hline
\multicolumn{7}{l}{$t_5$} \\
\multicolumn{7}{l}{\bm{$m=n=15$}} \\
\hline
Setting 1 & 23.5 & 23.9 & 24.2 & 24.1 & \textbf{24.4} & 23.9 \\
Setting 2 & 24.0 & \textbf{24.1} & 23.1 & 22.6 & 22.0 & 22.2 \\
Setting 3 & 23.7 & \textbf{23.8} & 22.4 & 23.1 & 22.5 & 23.3 \\
Setting 4 & 22.1 & 22.4 & 22.2 & 22.4 & 22.4 & \textbf{23.5} \\
\hline
\multicolumn{7}{l}{\bm{$m=n=50$}} \\
\hline
Setting 1 & 65.8 & \textbf{66.1} & 60.8 & 60.9 & 61.8 & 61.4 \\
Setting 2 & \textbf{68.7} & \textbf{68.7} & 62.2 & 62.2 & 63.7 & 63.4 \\
Setting 3 & 67.3 & \textbf{67.6} & 61.1 & 61.4 & 62.7 & 62.2 \\
Setting 4 & \textbf{63.9} & 58.4 & 57.6 & 53.7 & 60.2 & 60.0 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=100$}} \\
\hline
Setting 1 & 92.3 & \textbf{92.4} & 87.6 & 87.6 & 88.0 & 88.1 \\
Setting 2 & \textbf{91.7} & \textbf{91.7} & 87.0 & 87.4 & 87.9 & 87.8 \\
Setting 3 & 93.2 & \textbf{93.4} & 88.9 & 88.7 & 89.4 & 89.5 \\
Setting 4 & \textbf{90.6} & 86.8 & 85.7 & 83.4 & 87.4 & 87.4 \\
\hline
\hline
\end{tabular}
}
\end{minipage}\hfill
\begin{minipage}{.5\linewidth}
\centering
\medskip
\scalebox{0.45}{
\begin{tabular}{rcccccc}
\hline
& \multicolumn{6}{c}{\textbf{Linear}} \\
\cline{2-7}
& \makecell{\textbf{WMW -- max rel} } & \makecell{\textbf{WMW -- mean }} & \makecell{\textbf{\textit{t} test -- max rel }} & \makecell{\textbf{\textit{t} test -- mean }} & \makecell{\textbf{SEM} } & \makecell{\textbf{SEM -- corrected}} \\
\hline
\multicolumn{7}{l}{$Laplace(0,1.25)$} \\
\multicolumn{7}{l}{\bm{$m=n=15$}} \\
\hline
Setting 1 & 21.5 & \textbf{22.3} & 19.6 & 20.4 & 19.3 & 19.0 \\
Setting 2 & \textbf{21.9} & 21.4 & 21.0 & 21.1 & 19.8 & 21.0 \\
Setting 3 & 22.0 & \textbf{22.5} & 20.6 & 20.3 & 20.1 & 20.3 \\
Setting 4 & 17.3 & \textbf{19.8} & 16.5 & 18.8 & 19.4 & 19.3 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=50$}} \\
\hline
Setting 1 & 61.8 & \textbf{62.0} & 53.2 & 53.2 & 55.0 & 54.6 \\
Setting 2 & 62.2 & \textbf{63.2} & 52.7 & 53.3 & 54.5 & 53.8 \\
Setting 3 & 64.6 & \textbf{66.0} & 52.9 & 52.8 & 54.7 & 54.2 \\
Setting 4 & \textbf{58.9} & 56.9 & 51.7 & 49.8 & 56.0 & 56.1 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=100$}} \\
\hline
Setting 1 & \textbf{92.3} & 92.2 & 83.2 & 82.9 & 83.5 & 83.4 \\
Setting 2 & \textbf{88.1} & 87.9 & 77.7 & 77.5 & 78.2 & 78.1 \\
Setting 3 & \textbf{91.0} & 90.7 & 82.6 & 82.9 & 82.9 & 83.0 \\
Setting 4 & \textbf{85.5} & 80.4 & 77.7 & 74.2 & 79.3 & 79.3 \\
\hline
\multicolumn{7}{l}{Exp} \\
\multicolumn{7}{l}{\bm{$m=n=15$}} \\
\hline
Setting 1 & 22.2 & \textbf{23.1} & 18.1 & 18.2 & 18.7 & 18.3 \\
Setting 2 & 19.7 & \textbf{19.8} & 17.0 & 17.5 & 17.2 & 17.5 \\
Setting 3 & 19.4 & \textbf{20.2} & 16.9 & 17.6 & 16.9 & 17.0 \\
Setting 4 & 15.7 & \textbf{16.0} & 13.4 & 14.9 & 14.8 & 14.9 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=50$}} \\
\hline
Setting 1 & 61.9 & \textbf{62.0} & 40.8 & 41.8 & 42.6 & 42.6 \\
Setting 2 & 56.2 & \textbf{57.6} & 38.0 & 38.2 & 39.9 & 39.3 \\
Setting 3 & 63.0 & \textbf{63.5} & 42.6 & 42.6 & 44.9 & 44.8 \\
Setting 4 & \textbf{50.1} & 45.0 & 36.9 & 36.7 & 40.6 & 40.4 \\
\hline
\multicolumn{7}{l}{\bm{$m=n=100$}} \\
\hline
Setting 1 & 86.7 & \textbf{87.2} & 67.2 & 67.5 & 67.7 & 67.8 \\
Setting 2 & 85.4 & \textbf{85.6} & 65.5 & 66.0 & 66.6 & 66.8 \\
Setting 3 & 88.2 & \textbf{88.4} & 66.4 & 66.3 & 67.3 & 67.6 \\
Setting 4 & \textbf{83.5} & 76.1 & 65.2 & 61.1 & 66.9 & 67.7 \\
\hline
\hline
\end{tabular}
}
\end{minipage}\hfill
\end{table}
\end{landscape}
\end{document}
However, I would like to split this table nicely over multiple pages (and thus by using e.g. longtable), in such way that on one page, I have the results for the N(0,1) and Laplace distribution (side by side), and then on the second page the t_5 and Exp distribution (side by side), i.e. split each table over 2 pages, but have 2 tables side by side by using minipage inside long table.
I know I could converge them and just make one large table and then use long table, however, I would really like not to rewrite the code (since I have 10 more tables like this). Does someone know how I could do this? I tried several ways, but none of them produce the result I am looking for.
Thank you for all your feedback!
Heidelinde
How do I draw the following table in LaTeX? The data inside is not that important.
I wrote the following code:
\begin{table}[H]
\centering
\begin{tabular}{cccccc}
\hline
\multicolumn{6}{|c|}{Feature Vector of Samples} \\
\hline
\headerrow & 1 & 2 & 3 & 4 & 5\\
1 & \(9.87*e^{-01}\) & \(8.67*e^{-17} \)& \(4.13*e^{-24}\) & \(1.16*e^{-17}\) & \(4.58*e^{-17}\) \\
2 & \(1.16*e^{-16}\) & \(9.99*e^{-01}\) & \(9.14*e^{-25}\) & \(3.63*e^{-22}\) & \(2.69*e^{-11}\) \\
3 & \(4.35*e^{-33}\) & \(7.85*e^{-34}\) & \(9.93*e^{-01}\) & \(3.74*e^{-04}\) & \(4.55*e^{-34}\) \\
4 & \(5.51*e^{-26}\)& \(5.13*e^{-31}\)& \(5.02*e^{-04}\) & \(9.99*e^{-01}\) & \(1.71*e^{-29}\) \\
5& \(9.60*e^{-18}\) & \(2.21*e^{-07}\)& \(2.52*e^{-25}\)& \(4.64*e^{-20}\)& \(9.99*e^{-01}\)
\end{tabular}
\caption{wasssss}
\label{tbl:wasss}
\end{table}
and here is the result:
What I need to add is one multi row, and the first row should not include the first column.
In theory you could create a table like this using the following code, but please have a look at http://betterposters.blogspot.com/2012/08/the-data-prison.html before you inflict such a table on your readers
\documentclass{article}
\usepackage{graphicx}
\usepackage{multirow}
\begin{document}
\begin{table}[htbp]
\centering
\begin{tabular}{|c|c|c|c|c|c|c|}
\hline
\multicolumn{2}{|c|}{} &\multicolumn{5}{|c|}{Feature Vector of Samples} \\
\cline{3-7}
\multicolumn{2}{|c|}{} & 1 & 2 & 3 & 4 & 5\\\hline
\multirow{5}{*}{\rotatebox{90}{samples}} & 1 & \(9.87*e^{-01}\) & \(8.67*e^{-17} \)& \(4.13*e^{-24}\) & \(1.16*e^{-17}\) & \(4.58*e^{-17}\) \\\cline{2-7}
&2 & \(1.16*e^{-16}\) & \(9.99*e^{-01}\) & \(9.14*e^{-25}\) & \(3.63*e^{-22}\) & \(2.69*e^{-11}\) \\\cline{2-7}
& 3 & \(4.35*e^{-33}\) & \(7.85*e^{-34}\) & \(9.93*e^{-01}\) & \(3.74*e^{-04}\) & \(4.55*e^{-34}\) \\\cline{2-7}
& 4 & \(5.51*e^{-26}\)& \(5.13*e^{-31}\)& \(5.02*e^{-04}\) & \(9.99*e^{-01}\) & \(1.71*e^{-29}\) \\ \cline{2-7}
& 5& \(9.60*e^{-18}\) & \(2.21*e^{-07}\)& \(2.52*e^{-25}\)& \(4.64*e^{-20}\)& \(9.99*e^{-01}\)\\
\hline
\end{tabular}
\caption{wasssss}
\label{tbl:wasss}
\end{table}
\end{document}
you can use the excel2latex. It's a powerful tool for tables write. You'll need add the packagins after, like it's on the follow script:
https://www.ctan.org/tex-archive/support/excel2latex
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{multirow} %for multirow
\usepackage{rotating} %for sideways, rotating "samples" at 90°"
\usepackage{bigstrut} %for bigstrut
\begin{document}
% Table generated by Excel2LaTeX from sheet 'Planilha1'
\begin{table}[htbp]
\centering
\caption{Add caption}
\begin{tabular}{|c|r|r|r|r|r|r|}
\hline
\multicolumn{2}{|c|}{\multirow{2}[4]{*}{}} & \multicolumn{5}{c|}{Feature Vector of Samples} \bigstrut\\
\cline{3-7} \multicolumn{2}{|c|}{} & 1 & 2 & 3 & 4 & 5 \bigstrut\\
\hline
\multirow{5}[10]{*}{\begin{sideways}samples\end{sideways}} & 1 & Value & Value & Value & Value & Value \bigstrut\\
\cline{2-7} & 2 & Value & Value & Value & Value & Value \bigstrut\\
\cline{2-7} & 3 & Value & Value & Value & Value & Value \bigstrut\\
\cline{2-7} & 4 & Value & Value & Value & Value & Value \bigstrut\\
\cline{2-7} & 5 & Value & Value & Value & Value & Value \bigstrut\\
\hline
\end{tabular}%
\label{tab:addlabel}%
\end{table}%
\end{document}
I'm sorry if this question has been asked before, but I just can´t figure out how to create this table, while keeping it somewhat nice looking.
I have attached an image, containing an Excel representation of the table I'm trying to create.
I hope a Latex master can help me out here!
Use \multicolumn{n-cells}{alignment}{content}
\begin{tabular}{|c|c|c|c|c|c|}
\hline
Outer Fold & \multicolumn{2}{c|}{ANN model} & \multicolumn{2}{c|}{Lin Reg model} & Baseline model \\
\hline
i & $h_i^*$ & $E_i^{test}$ & $L_i^*$ & $E_i^{test}$ & $E_i^{test}$ \\
\hline
1 & 3 & 0.301 & 128 & 1.206 & 1.219 \\
1 & 3 & 0.301 & 128 & 1.206 & 1.219 \\
1 & 3 & 0.301 & 128 & 1.206 & 1.219 \\
\hline
\end{tabular}
I'm trying to add a caption to a table in latex, however it throws this error "! LaTeX Error: \caption outside float."
From the error I am guessing it means that it is outside the table, but I have clearly put it inside.
\begin{tabular}{|c|c|c|c|c|c|}
\caption{Table1}
Potentiometer & Resistance & \multicolumn{2}{c}{Calculated V\textsubscript{32}} & \multicolumn{2}{c|}{Measured V\textsubscript{32}}\\ \cline{3-6}
Position & R\textsubscript{34} & Amplitude & Phase & Amplitude & Phase\\ \hline \hline
1 & 303.8 & & 2.73 & 28.2 & 2.51\\
2 & 1.141k & & 1.81 & 28.2 & 1.63\\
3 & 3.453k & & 0.79 & 28.2 & 0.5\\
4 & 5.33k & & 0.53 & 28.2 & 0.38\\
5 & 7.45k & & 0.38 & 28.2 & 0.25\\
6 & 9.54k & & 0.30 & 28.2 & 0.13\\
7 & 10.84k & & 0.27 & 28.2 & 0.13\\
\hline
\end{tabular}
The tabular environment won't take a caption. You need to do something like this:
\begin{table}
\begin{tabular}{|c|c|c|c|c|c|}
Potentiometer & Resistance & \multicolumn{2}{c}{Calculated V\textsubscript{32}} & \multicolumn{2}{c|}{Measured V\textsubscript{32}}\\ \cline{3-6}
Position & R\textsubscript{34} & Amplitude & Phase & Amplitude & Phase\\ \hline \hline
1 & 303.8 & & 2.73 & 28.2 & 2.51\\
2 & 1.141k & & 1.81 & 28.2 & 1.63\\
3 & 3.453k & & 0.79 & 28.2 & 0.5\\
4 & 5.33k & & 0.53 & 28.2 & 0.38\\
5 & 7.45k & & 0.38 & 28.2 & 0.25\\
6 & 9.54k & & 0.30 & 28.2 & 0.13\\
7 & 10.84k & & 0.27 & 28.2 & 0.13\\
\hline
\end{tabular}
\caption{Table1}
\label{tab:xyz}
\end{table}
If you don't want to use a "float" (e.g. table or figure) that will "float away" from the place you define it, you can add:
\usepackage{capt-of}
in the preamble and then do something like:
\begin{center}
\captionof{table}{Caption text goes here}
\label{table1} % for use in \ref{table1} if you want to refer to the table number
\begin{tabular}{|c|c|c|c|c|c|}
% etc.
\end{tabular}
\end{center}
to add a auto-numbered caption to a non-float.