Well, all was good with submitting to itunes connect, but out of the blue, I just got this email right after uploading my app:
Invalid Signature - Code object is not signed at all. The binary at
path [churningseas.app/churningseas.codea] contains an invalid
signature. Make sure you have signed your application with a
distribution certificate, not an ad hoc certificate or a development
certificate. Verify that the code signing settings in Xcode are
correct at the target level (which override any values at the project
level). Additionally, make sure the bundle you are uploading was built
using a Release target in Xcode, not a Simulator target. If you are
certain your code signing settings are correct, choose "Clean All" in
Xcode, delete the "build" directory in the Finder, and rebuild your
release target.
I've seen that this a commun, infamous error message, and that there is no clear answer to how to fix this.
Has anyone an idea on what could be wrong with my settings? Thanks you so much in advance, I'm suppose to release the app this month and I'm freaking out a little bit here...
The email is asking you to check the churningseas.codea file. I had a similar issue except they were referencing a docset file in my project. After hours of debugging this issue, it has come to my attention that Apple is now frowning upon docset files. After removing the docset file it fixed my issue. You may want to check the churningseas.codea file and see if removing it doesn't fix your issue.
If that doesn't work check this answer Error itms-90035. There could be many causes for this error.
Related
I always get an email from apple about an Invalid Signature when I try to upload my archive. I tried using automatic signing first, changed it to manual then. Deleted all old certificates, cleaned the project, recreated certificates + profiles from developer portal. Still no success.
I did the code signing settings on the target level as well as the project level. I also have no special character in the Product Name.
I also checked the output of the codesign/security commands like it's described in this answer
Does anyone have an idea what else to try? I also contacted the apple support yesterday and I am waiting for an answer.
The email content:
Dear developer,
We have discovered one or more issues with your recent delivery for "Bier brauen Bier Rezepte". To process your delivery, the following issues must be corrected:
Invalid Signature - A sealed resource is missing or invalid. The file at path [Bier brauen Bier Rezepte.app/Bier brauen Bier Rezepte] is not properly signed. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/library/ios/documentation/Security/Conceptual/CodeSigningGuide/Introduction/Introduction.html
Once these issues have been corrected, you can then redeliver the corrected binary.
I will add my 2 cents here, I had the same problem a few days ago, and the reason was that I had in my assets a file with an accentuated character "é" in one of my assets files causing the binary check to fail.
Once removed the invalid signature error was gone, and the binary was validated by apple.
More info: Avoid special characters in Executable names
After a lot of debugging I just created a new ionic project via cli and copied my src folder into it. So some configuration was messed up. Can't tell which one.
Try to verify your app and display names again (it should be same) and make "Signing" again.
I found this info in this blogpost.
I am in the process of submitting my first Ionic application to the store. However I am receiving an error every single time that I try to submit my binary to the store:
Invalid Signature - A sealed resource is missing or invalid. The binary at path [Who Paid Last?.app/Who Paid Last?] contains an invalid signature. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate....
I have verified that my certificates are correct. I have even tried moving my .git folder outside of the directory, but still no luck. I have tried about 7 different configurations and still the same result time and time again.
The crazy thing is that after my archive has been built, I validate using XCode's validator. The validator says that my .ipa has zero errors and that it is ready for submission, but iTunes Connect says differently.
I have also tried following this tutorial on troubleshooting but without any luck.
The issue had to do with the name of my app. The name of my application is Who Paid Last?, and come to find out, the "?" in the name is what was causing the issue. As soon as I removed it, the app was submitted just fine with out any issues.
I had a similar issue, but my error message was "Invalid Signature. Code object is not signed at all. The binary at path [myApp.app/www/js/02_jshint.js] contains an invalid signature...."
Deleting the #!/usr/bin/env directive from the top of my 02_jshint.js file, then building the iOS version of your project from the CLI worked for me.
Im trying to submit a version of my app and after building im seeing the following screen
My app has a valid provisioning profile except one .o file that is for some reason not included in it..
That has been the case for a while now, and i have managed to submit the app without it being a problem.
A couple of day ago, after submiting a new version, i recived an email from apple saying :
We have discovered one or more issues with your recent delivery for "xxx". To process your delivery, the following issues must be corrected:
Invalid Signature - Code object is not signed at all. The binary at path [xxx.app/FooterCoverflowCollectionViewLayout.o] contains an invalid signature. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/library/ios/documentation/Security/Conceptual/CodeSigningGuide/Introduction/Introduction.html
Once these issues have been corrected, you can then redeliver the >corrected binary.
Regards,
The App Store team
I've tried the steps they recommended with no luck. Can anyone have any idea how to solve the issue ?
Removing the mentioned file, building, re-adding it to the project and building again solved the problem.
I experienced this exact problem, and would like to share what happened.
The .m file for one of the classes we had written (ie: not a third party library) had been erroneously added to the project in the "Copy Bundle Resources" section in "Build Phases". There is no reason for the file to have been there, and had been there for quite a long time.
The error described in the original post just started showing up in our latest submission to the app store last week, and from what I gather from other posts around the internet, Apple has recently changed something about their code signing and submission process. The .m was absolutely in the Copy Bundle Resources section in our last several submissions.
Simply removing this file, rebuilding, and resubmitting solved the problem. Since the file didn't need to be there in the first place, there was no need to add it back again.
There may be other causes for this error, but if you get this error, check your "Copy Bundle Resources" section the files that are being listed with zero entitlements.
I am trying to submit an update to the iOS app store. I am going from a Buzztouch app to a Sprite Kit app. I am able to archive the Xcode project and submit it. The app gets to the status of Upload Received but than about a minute later, it changes to Invalid Binary and I get an email saying:
Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target.
Once these issues have been corrected, go to the Version Details page and click "Ready to Upload Binary." Continue through the submission process until the app status is "Waiting for Upload." You can then deliver the corrected binary.
I have cleaned out the build directory, rebuilt my release target, and made new provisioning profiles multiple times. All of the Code Signing Identities are set to iOS Developer. Code signing and the provisioning profiles have always been a little bit confusing to me, I could have made some obvious mistakes.
I have tried submitting over 50 times! I find this very frustrating because I have emailed Apple and they got back to me but it was just a link to the dev center with code signing information. I have also spent lots of time searching the Internet to find a solution to this and there hasn’t been a good solution that actually works for this problem.
The only thing I can think of is either because I am changing from a Buzztouch app or it is Sprite Kit.
Here is a screenshot of my code signing:
In Apple developer support there are two additional common causes of the Invalid Signature binary rejection reason,
executable files containing special characters (i.e. non-numeric, and non-alpha). To resolve this issue, change the Xcode target’s Product Name build setting from “${TARGET_NAME} to a string containing only alpha/numeric characters. Let me know if this was the cause of the issue (and the problematic characters) because I file bug reports to fix each instance I find here.
Apple Double Files ("double files") that result from copying the Xcode project uncompressed to/from a non HFS+ formatted hard drive. To check if this caused your rejection:
A. Run the app diagnostic here: How do I check if my application's signature has been corrupted?
B. Then check the command line output with: List of Signature Verification Failure Root Causes. Double files are diagnosed with a message like:
resource missing: my.app/._.*
C. From the docs:
The file prefixed with "._" is considered an AppleDouble file and it
can result from copying the uncompressed Xcode project folder onto a
non-HFS+ formatted disk. The AppleDouble files must be removed using
the 'dot_clean' command. The Xcode project folder is the argument to
dot_clean as illustrated below. Note: You can drag your Xcode project
folder from Finder into the Terminal window to automatically fill its
path into the command.
dot_clean /path/to/My_Xcode_Project
(If Terminal can't find the dot_clean utility, download the optional Command Line Tools through Xcode > Preferences > Downloads)
D. After running dot_clean on your Xcode project, create a new app archive (via Xcode > Product > Archive), reattempt submission.
To prevent double files be sure to compress the Xcode project folder to .zip using Finder before transferring it to/from a non HFS+ formatted hard drive.
This is what I did when I encountered a similar problem with the Mac App Store:
Re-generate the app's Distribution and Development certificates (from the Apple Developer's Certificates site).
Download both certificates and drag them to Xcode's icon (not sure whether it had any impact, but after so many submission failures, I was pretty superstitious).
Re-fresh the certificates and identities from Xcode.
Open Xcode's Preferences.
Go to Accounts tab.
Clicked my account
Clicked the refresh button.
Generate the archive.
Submit the app and clicked on "refresh signing identities" somewhere mid-way in wizard prompts.
As a reference, here is my built settings related to signing. That one worked the last time I submitted the app (which has been in the "waiting for review" state for the past two days now, so I guess it passed all of their automated tests).
Your issue relate with signing failed because of your app didn't sign with recent distribution certificate. Check the following steps:
1) Check your bundle identifier to list out provisioning profile as like below picture. Because It also lead to this problem.
2)You may not using the correct certificates when building your app. Just Delete your certificates in Provisioning Portal and create new ones and update them in Xcode.
3) From your picture, you didn't selected correct provisioning profile. Goto Organizer / Provisioning Profiles / Refresh and allow Xcode to fetch the latest ones. see screen shot to how to do that.
Select correct Provisioning profile.
Select correct code sign.
4) Cleaned up your project.
5) Just clean all your targets . You can even go to /Users/%USERNAME%/Library/Developer/Xcode/DerivedData and delete all of the directories in there.
see this ref
Under "Code Signing Identity" Make sure you have selected your Distribution Cert for the "Release" scheme
Under "Provisioning Profile" make sure you select a Distribution provisioning profile (not an Ad Hoc one)
Archive and distribute, make sure the same cert is selected when submitting (after entering your iTunesConnect info)
After doing all of the above
Menu Bar
try Product->Archive
Then from the organise try resigning and submitting.
Window->Organiser
Select archive and then press distribute (but i'm pretty sure you'll know how that works)
Obviously if you can't do this then chances are you have indeed got something wrong with your signing certificates, more specifically your bundle identifier is likely to be the culprit.
One other option is your app uses services that you haven't set up on developer.apple.com/ios for the app id such as game centre, push notification etc. Good luck
check your launch images . Are they conflicting like 2 images have got same name. Because i have got the similar issue which i solved like this within 10 minutes.
To figure out this problem I just created a new Xcode project and copied and pasted everything into the new project.
In my case the problem was to not ASCII chars in filename (someone did sent us to embed), solution was to do a global search in project:
ls -1 -R -i | grep -a "[^A-Za-z0-9_.':# /-]"
And delete those chars from filenames.
I am trying to update my application , but after uploading the binary , Itunes connect sends me this email :
Dear Developer, Thank you for your
recent binary submission for "MY APP"
to the App Store. Unfortunately we
discovered an issue with your binary
that you will need to correct in order
for your application to proceed to the
review stage. The specific issue is
outlined below: Invalid Signature -
Make sure you have signed your
application with a distribution
certificate, not an ad hoc certificate
or a development certificate. Verify
that the code signing settings in
Xcode are correct at the target level
(which override any values at the
project level). Additionally, make
sure the bundle you are uploading was
built using a Release target in Xcode,
not a Simulator target. If you are
certain your code signing settings are
correct, choose "Clean All" in Xcode,
delete the "build" directory in the
Finder, and rebuild your release
target. Once you have corrected the
issue, please return to the
application's version details page in
the iTunes Connect Manage Your
Applications module and click on the
Ready to Submit Binary button. This
will take you through the binary
submission flow and return your
application version status to Waiting
for Upload. You can then use
Application Loader to upload your new
binary. If any other issues are found
with your submission you will be
contacted. Thanks, The iTunes
Connect Team
I am sure that my binary signed application with a distribution certificate NOT AD HOC !!!
what is your suggestion to solve this problem ! I NEVER HAD THIS PROBLEM !!!!!
I download the app distribution CER again but nothing change ! I have 6 apps on app store and never faced with this
Note that this QA is incredibly old. Apple have largely ameliorated this problem. Enjoy.
99 times out of 100, here is the problem:
Select "TARGETS", not "PROJECT"
Click on the name of your project at the Top Left of the main XCode6 window. (ie, just above where it probably says "Classes".)
Look at the large area which opens. Carefully look at the WHITE COLUMN ONTHE LEFT.
Choose "TARGETS" ... rather than "PROJECT"
Then, correctly set your certificate to the 3rd party Mac Developer cert.
I had the same message appear from Apple, and selecting "targets" not "projects" when setting code signing identity did NOT resolve my issue.
Turns out, as the last step of submitting the app to the store (via XCode4's Organizer panel - Archives tab), I was presented with a dialog sheet that showed the distribution certificate it was going to be submitted with, which was DEFAULTING TO A DIFFERENT DISTRIBUTION CERTIFICATE I had in my keychain - and NOT the valid certificate that I'd signed the app with!
Once I manually selected the correct distribution certificate in this last step of app submission, it went through fine. (I also opened up my Keychain Access app and deleted the offending distribution profile, that I didn't have any use for anymore).
A main point I'd like to offer is that Archive Validation (or submission thru App Loader) is supposed to identify the signature problem before sending the application to iTunes Connect. This is a first indication that the problem is related to a developer tools error.
Having witnessed this problem with multiple developers strengthens that hunch. In my experience the "Invalid Signature" diagnosis is not caught during client side validation as a result of a bug in older versions of Xcode. Devs simply update their OS X to 10.7.x, plus Xcode 4.2.1 and with no change to the project or code the app is ingested into iTunes Connect without issue.
Keep it in mind for others experiencing this problem...it's especially common on Snow Leopard with Xcode 4.0.2, 3.2.6 or less.
Apple's new publication touches on this point, see iTunes Connect Store - Binary Rejection emails - Invalid Signature.
I had exactly the same problem, checked everything but couldn't find any issues.
Problem ended up being because my project was stored on a FAT32 USB stick! Copied it to my Mac and everything worked perfectly after that.
Hope this helps!
I got the same problem and spent many evenings solving it!
For my app the problem was a question mark in the executable name. In the apple developer docs is noted you can't use special character in executable name but not which ones are allowed.
I changed the executable name in build settings and the upload works!
I have been battling this issue for almost a week! For me, it turned out that the Error email from Apple was completely wrong and misleading. (I knew that all of my certificates and code signing settings were in fact correct.) It turned out, that my app was getting rejected because there was an exclamation point (!) in the name. Apparently, only alphanumeric characters (A-Z, 0-9) and dashes are allowed for the product name. (Characters like ?#$% are not allowed.)
The Fix:
1.) Click on the blue project icon on the left panel in Xcode.
2.) Click on the build settings tab.
3.) Select the current target from the menu. (It's right next to the blue project icon.
4.) Scroll down until you see the "Packaging" Category.
5.) Find where it says "Product Name" and change it to a name that does not contain any special characters.
I hope this helps! Sorry I had to red-out my company info!