I have couple of URLs that has to be called(programatically) through wifi not with mobile data.
As WIFI ASSIST is on , whenever the wifi is weak ,packets get transferred through Mobile data.
I would like to stop this from happening.
As far as I have researched, there is no API to toggle wifi assist switch on and off programatically
I can find if the user has mobile data and wifi on with the help of Reachability Class I believe and I can alert the user to keep wifi assist off but this is a very bad user experience.
so I decided to look if its possible to be done with the help of iOS mobile configuration file.
But I couldn't find any keys related with wifi-assist in Apple configuration profile reference.
so I am wondering , is it possible to force wifi to be used for certain URLs.
I remember this is possible with VPN ON DEMAND we can have certain domains to be accessed via VPN.
I am wondering if same is possible for wifi as well through configuration profile
Any suggestions are welcome.
As others have mentioned, there is no way to do manipulate this setting programmatically in iOS. This is not really what you are asking, as you seem to already know the answer to this is "No".
You are asking about the configuration profile, so I am assuming these are managed devices. Unfortunately, there is no configuration profile payload I am aware of that forces the managed devices to disable Wi-Fi Assist.
Your intent, however, is a bit different than what is being asked, I believe. I think you basically have an app that communicates with a resource that is only accessible via the Wi-Fi network (likely a corporate Wi-Fi network). If the app tries to connect to the resource while on cellular, it will not be able to connect. In some cases, when the Wi-Fi signal is weak, the device tries to be helpful and switches to cellular, causing issues with the app. If we could figure out a way to force iOS to not take advantage of Wi-Fi Assist when your app is running, you would be in good shape.
If you can install this app as a managed app, there is a way to identify that the app should only be allowed to run on a Wi-Fi connection. Setting the network usage rules AllowCellularData to false should do this (see this for more details). The thing I am not sure of with this solution, is whether this simply causes the connections to fail when Wi-Fi Assist is on and active, or if it makes iOS prefer to not use Wi-Fi assist when the app is running because it cannot connect over cellular. So I think you can tell an app to only connect over WiFi, but it doesn't really give you a better solution to your user experience problem. The only think it really buys you is that your app connection won't ever try to connect when connected to cellular. There is a chance, however, if you change this value to false for your app bundle ID, it will prevent Wi-Fi Assist from enabling when your app is running. I don't have access to MDM to try it out, but you could test and see.
Ultimately, given that this is probably a corporate device situation, I think you are going to have to address this through user training. The good news is that this is a one-time step. Sure, users may have slight degradation of network performance when Wi-Fi signal is weak but cell signal is strong. This does not matter as much if these are corporate devices where the corporate apps will mostly work only on the company's Wi-Fi network.
Another solution is what you mentioned, basically using on-demand VPN to provide a connection to the internal resources. This is additional infrastructure work, and you already mentioned it, so I'm not sure if it is even an option.
Obviously, the other solution would be to expose the network resources through your firewall, which could allow you to access it over cellular. I'm suspecting this is not possible due to security constraints.
Unfortunately, there are not a lot of good options in this space. However, have hope that there is some way to do it, as Sonos appears to have done something to
allow their app to avoid switching to WiFi Assist while streaming to a local network resource: https://sonos.custhelp.com/app/answers/detail/a_id/4257/~/wi-fi-assist-and-sonos
I wonder if you could have your app open a streaming audio connection to a fixed local network resource, which would cause it to use Wi-Fi. It's a pretty crazy hack, but with a low enough bitrate audio file streaming, it might do what you need while not eating up too much of the network throughput.
Per Apple's notes on Wi-Fi Assist:
Wi-Fi Assist won't automatically switch to cellular if you're data
roaming.
Wi-Fi Assist only works when you have apps running in the
foreground and doesn't activate with background downloading of
content.
Wi-Fi Assist doesn’t activate with some third-party apps
that stream audio or video, or download attachments, like an email
app, as they might use large amounts of data.
Of course the other possible solution that you could consider is improving your Wi-Fi coverage to that the signal doesn't get bad enough for Wi-Fi Assist to be needed. I know this may not be feasible, but wanted to put it out there.
Good luck with this!
There is no public API that allows you to enable/disable "Wi-Fi Assist", and even if you find a way to do it your app will be rejected.
No you can not enable or disable WiFi by programmatically and there is no API for this.
I've read posts that say that multiple iOS apps on the same iPhone can connect to the same device. But are they sharing one connection or does each app have its own connection? If they are sharing a connection, isn't that a security problem for one app to see data for the second app?
More specifically, see the following conceptual diagram. Is there a Connection 1 and a Connection 2 as diagramed even though the user would only see one connection in Bluetooth Settings?
Apple docs, here, list the method to use in CBCentralManager to connect to a connected device (look at last paragraph).
If there is one connection, why would Apple allow this due to the security issues?
I am building an app which will communicate with an external accessory capable of establishing a wi-fi bridge.
I am not able to defer the situation that how do I establish connection with this external accessory and then the device should be shown connected in my app.
After connection, there are certain actions I need to perform on the device. So a two way communication is also a requirement. How do I initiate a connection and then communicate over it.
Is any Apple framework available for it. As I am not able to find anything.
If possible, please provide a sample code on how to achieve this feat.
Thanks in advance.
Since iOS 7 was released, it's possible to connect devices through a mesh network using the Multipeer Connectivity Framework that can be used for app development.
My question is, could the same type of connectivity that's achievable through an app apply to Safari? In other words, does Safari's Internet connection mechanism force it to go through iOS' cellular data / wifi, or is it possible to allow the user to browse through a mesh?
I don't know much about iOS development and I suspect that websites opened through Safari don't have the authority to determine the sort of Internet connection mechanism that the device uses, but I wanted to ask if this is achievable by asking the user for permission or something like that.
Something that comes to mind is users' ability to download photos from websites to their file-systems, but then again they are the ones who are making the requests --the websites aren't asking for permission to save the photos.
The simple answer is no. You have no way to control Safari's network connection mechanism other than the options found in Settings->Safari.
i am working on an App that uses wifi network to pass data from one ipad to another ipads .
i have already referred the following sample code about:
http://mobileorchard.com/tutorial-networking-and-bonjour-on-ip
The above sample code connects Devices using wifi and can exchange messages using Cfnetworking and Bonjour.
My problem is that i am not able to see Active Servers all the time .While Some times it Shows me Active servers and i can easily connect with and Exchange Messages but when i relaunch or open the app after some time it doesn't show me active servers so i am unable to connect and exchange messages. The same problem occurs in the sample code available from above link having tutorial on to Send data over wifi to another Devices.
I am Stucked up over here where i am unable to connect with active Devices all the time because not able to access those servers.
In chatty sample code same problem occurs where you can see active chat room's and connect with but some times you will not be able to see those active chat rooms availabe even if there are active servers who have already started new chat room where all Devices are connected to same wifi network.
Any help would be highly Appreciable , Thanks in advance.
Any chance the wi-fi interface on the device is going to sleep from disuse? Or that the user roamed to a different Wi-Fi access point with the same name that isn't bridged via Bonjour?
Have you considered using Multipeer Connectivity instead of using Bonjour directly? IIRC, that API would let you communicate even if the devices are not on the same Wi-Fi network, which is probably what you want anyway.