I have Installed Test In Progress Plugin in Jenkins.And I am selecting the show test in progress option. I am Invoking Ant by specifying the build file name .The Job is Executed Successfully but I am unable to see the Test progress report(i.e it is empty).I have tried adding testInProgress-testng-client-0.1.jar to my test classpath but it shows no results.Please help
I had the same issue in Test In Progress Plugin, of an empty Test progress report in jenkins.
Solved it by adding testInProgress-testng-client in Maven POM dependencies:
<dependencies>
...
<dependency>
<groupId>org.imaginea.jenkins.plugins</groupId>
<artifactId>testInProgress-testng-client</artifactId>
<version>0.1</version>
<scope>test</scope>
</dependency>
...
</dependencies>
And then, set the testinprogress listener (in my case for TestNG), under maven surefire/failsafe plugin configuration:
<configuration>
...
<properties>
<property>
<name>listener</name>
<value>org.imaginea.jenkins.plugins.testinprogress.testng.TestNGProgressRunListener</value>
</property>
</properties>
...
</configuration>
Related
I have a multi module maven project for e.g.
A
B
C
D
E
Currently this project is working fine and have a single job to build all the modules and upload to the artifactory with some version for e.g. 4.0.0-.They are using versions:set -DnewVersion=4.0.0-${BUILD_NUMBER} from Jenkins job.Now my next task is to split this project into module so they dev team can build each module independetly but my issue is some modules is having the dependecy on other modules for e.g
Module B is having dependecy on module A and Module C.if I build the module A first then it generate the number 4.0.0-00001 and upload it to the artifactory and then I build the module C then it generate the build 4.0.0-00005.Now the question comes how could I build the module B which is having the dependency on module A and C.In my opinion I need to define the version of module A and C explicitly in the dependency section.
<dependency>
<groupId>com.xyz.engine</groupId>
<artifactId>A</artifactId>
<version>4.0.0-00005</version>
</dependency>
From my module POM I am calling my parent POM and In jenkins job I am giving
versions:set -DnewVersion=4.0.0-${BUILD_NUMBER} for versioning purpose if I explicity define the version of A module then it is also passing the same value to the Parent POM and searching for it which is not avilable.Below is my module POM file
<?xml version="1.0"?>
<project
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"
xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<modelVersion>4.0.0</modelVersion>
<parent>
<groupId>com.truvenhealth.analyticsengine</groupId>
<artifactId>AnalyticsEngine</artifactId>
<version>4.0.0-00002</version>
</parent>
<artifactId>LicenseVerifier</artifactId>
<name>LicenseVerifier</name>
<packaging>jar</packaging>
<dependencies>
<!-- Modules dependencies -->
<dependency>
<groupId>com.xyz.engine</groupId>
<artifactId>Common</artifactId>
<version>4.0.0-00007</version>
</dependency>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
</dependency>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-beans</artifactId>
</dependency>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
</dependency>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-aop</artifactId>
</dependency>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-expression</artifactId>
</dependency>
<!-- External dependencies -->
<dependency>
<groupId>org.apache.commons</groupId>
<artifactId>commons-collections4</artifactId>
</dependency>
<dependency>
<groupId>commons-io</groupId>
<artifactId>commons-io</artifactId>
</dependency>
<dependency>
<groupId>org.aspectj</groupId>
<artifactId>aspectjtools</artifactId>
<version>1.6.2</version>
</dependency>
<dependency>
<groupId>com.verhas</groupId>
<artifactId>license3j</artifactId>
<version>1.0.4</version>
</dependency>
</dependencies>
<build>
<resources>
<resource>
<directory>src/main/resources</directory>
<filtering>false</filtering>
</resource>
</resources>
<plugins>
<!-- Plugin configurations inherited from the parent POM -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.jacoco</groupId>
<artifactId>jacoco-maven-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.projectlombok</groupId>
<artifactId>lombok-maven-plugin</artifactId>
</plugin>
</plugins>
</build>
</project>
it is taking the same value for Parent POM which I assigned to Common module .I am keeping the Parent POM in separate repository it should not take the same value it should only take that value which I am defining for the Parent POM and it should download it from their and provide all the values to module POM and the build should be created for module LicenseVerifier with different version.
If you have a multi module build which looks like this:
root (pom.xml parent of all modules)
+---- module-a (pom.xml)
+---- module-b (pom.xml)
+---- module-c (pom.xml)
+---- module-d (pom.xml)
To build a module separately you can do this via Maven like this:
mvn -pl module-a clean package
This will build the module-a only and get the dependencies of other modules from the remote repository. Or you can enhance that like this:
mvn -pl module-a -amd clean package
where the option -amd means --also-make-dependents. If a developer needs a particular state you can do this by a mvn install first and afterwards only build the module you would like to build.
A very important thing in relationship with multi module builds is to have the same version for all modules and the parent. So dependencies between those modules is no problem.
Starting with Maven 3.2.1 you can define the version via properties.
A simple change to prevent Maven from emitting warnings about versions
with property expressions. Allowed property expressions in versions
include ${revision}, ${changelist}, and ${sha1}. These properties can
be set externally, but eventually a mechanism will be created in Maven
where these properties can be injected in a standard way. For example
you may want to glean the current Git revision and inject that value
into ${sha1}. This is by no means a complete solution for continuous
delivery but is a step in the right direction.
Furthermore during development i would prefer the SNAPSHOT versions which the cleanup in the repository manager simpler. So in essence i don't any need to separate the modules which logicaly belong together.
Apart from that if you use the same version within your multimodule build you can use things like this: ${project.version} to define the version of a dependency which is part of the reactor.
I have a mavenized project and when I try to do a release, I get the below error:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-release-plugin:2.4
.2:prepare (default-cli) on project SimpleWeb: Unable to check for local modific
ations
[ERROR] Provider message:
[ERROR] SVN status failed.
[ERROR] Command output:
[ERROR] svn: '' is not a working copy
I have the below questions:
How is the scm configuration is given in POM file
If the communication to scm should happen through https, how can we configure the certificate on the client side
The release should happen from branch or trunk
My scm configuration is as follows:
<scm>
<connection>scm:svn:https://domain.com/svn/New_FW/CI_POC/SimpleWeb/trunk</connection>
<developerConnection>scm:svn:https://domain.com/svn/New_FW/CI_POC/SimpleWeb/trunk</developerConnection>
<url>https://domain.com/svn/New_FW/CI_POC/SimpleWeb/trunk</url>
</scm>
My maven release plugin configuration is as follows:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-scm-plugin</artifactId>
<version>1.3</version>
<configuration>
<providerImplementations>
<svn>javasvn</svn>
</providerImplementations>
<username>${scm.username}</username>
<password>${scm.password}</password>
</configuration>
<dependencies>
<dependency>
<groupId>com.google.code.maven-scm-provider-svnjava</groupId>
<artifactId>maven-scm-provider-svnjava</artifactId>
<version>1.14</version>
</dependency>
</dependencies>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<version>2.4.2</version>
<dependencies>
<dependency>
<groupId>com.google.code.maven-scm-provider-svnjava</groupId>
<artifactId>maven-scm-provider-svnjava</artifactId>
<version>1.6</version>
</dependency>
</dependencies>
<configuration>
<providerImplementations>
<svn>javasvn</svn>
</providerImplementations>
<tagBase>https://domain-inc.com/svn/New_FW/CI_POC/SimpleWeb/tags</tagBase>
<mavenExecutorId>forked-path</mavenExecutorId>
</configuration>
</plugin>
I am struck here and cant move ahead. Please help/guide me in resolving the issue. When I run the same by configuring the Maven Release Plugin in Jenkins I get a different error as: "svn: Authentication required". Why is this difference.
On Windows Jenkins slave I have same issue with multi maven project.
For fix it I added:
...
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
...
<configuration>
<commitByProject>true</commitByProject>
...
</configuration>
...
Have a project with several module projects and itself having other module projects. I have certain modules generating a special artifact type '.kar', and I am deploying this to artifactory during maven deploy phase.
Now I want to find a way by using this existing pom to download these specific artifacts from artifactory by version.
mvn dependency:copy <> allows me to download this per specific artifact.
I want this to be done via the pom file which generates these artifacts. Problem is when I use the dependency:copy, it only runs on the current pom which may or may not have the special artifact.
If I use it in then it re-deploys all the artifacts and downloads the special artifact correctly. This is not right solution though.
You could add a new module to your project that has <dependencies> to all of your .kar artifacts. In the POM file of this new module you can use the copy-dependencies goal of the maven-dependency-plugin.
<project>
<!-- Integrate this module into your multi-module project. -->
<parent>
<groupId>my.group.id</groupId>
<artifactId>my-parent-pom</artifactId>
<version>1.0.0-SNAPSHOT</version<
</parent>
...
<!-- Add dependencies for all your .kar artifacts. -->
<dependencies>
<dependency>
<groupId>my.group.id</groupId>
<artifactId>kar-artifact-1</artifactId>
<version>${project.version}</version>
<type>kar</type>
</dependency>
<dependency>
<groupId>my.group.id</groupId>
<artifactId>kar-artifact-2</artifactId>
<version>${project.version}</version>
<type>kar</type>
</dependency>
...
</dependencies>
<build>
<plugins>
<!-- Use the maven-dependency-plugin to copy your .kar artifacts. -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<version>2.8</version>
<executions>
<execution>
<id>copy-kar-artifacts</id>
<goals>
<goal>copy-dependencies</goal>
</goals>
<configuration>
<includeTypes>kar</includeTypes>
</configuration>
</execution>
</executions>
<plugin>
</plugins>
</build>
</project>
Please, I am new to maven and trying to build my first maven project. So, here are a few things I did:
from my command line into a directory called MavenProject I created:
mvn archetype:generate
and then choose a number to apply number, I entered 15 then;
Choose com.dyuproject.protostuff.archetype:basic-webapp version:
I chose version 1.0.7
groupId: com.henry
artifactId: HibernateTest
and the rest, I just entered..
and the project was created but then I typed in mvn eclipse:eclipse, I got an error that there was no pom.xml file even though I can see there is one in my mavenProject. so, I changed into the HibernateTest directory and in that directory, I tried the mvn eclipse:eclipse command again but this time, it gave the eorror:
Plugin com.dyuproject.protostuff:protostuff-maven-plugin:1.0.2-SNAPSHOT or one of its
dependencies could not be resolved: Failed to read artifact descriptor for
com.dyuproject.protostuff:protostuff-maven-plugin:jar:1.0.2-SNAPSHOT: Could not find artifact
com.dyuproject.protostuff:protostuff-maven-plugin:pom:1.0.2-SNAPSHOT
I tried to solve this by going to mvnrepository.com and found the protostuff maven and added the dependencies but still couldn't solve it. here is my pom.xml file:
pom.xml
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLS$
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_$
<parent>
<artifactId>Hibernate</artifactId>
<groupId>com.henry</groupId>
<version>1.0-SNAPSHOT</version>
<relativePath>../pom.xml</relativePath>
</parent>
<modelVersion>4.0.0</modelVersion>
<groupId>com.henry</groupId>
<artifactId>Hibernate-model</artifactId>
<name>Hibernate :: model</name>
<packaging>jar</packaging>
<build>
<defaultGoal>install</defaultGoal>
<plugins>
<plugin>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-maven-plugin</artifactId>
<version>${protostuff.version}</version>
<configuration>
<protoModules>
<protoModule>
<source>src/main/resources/com/henry/model/model.proto</source>
<outputDir>src/main/java</outputDir>
<output>java_bean</output>
<encoding>UTF-8</encoding>
<options>
<property>
<name>generate_field_map</name>
</property>
<property>
<name>separate_schema</name>
</property>
<property>
<name>builder_pattern</name>
</property>
<property>
<name>generate_helper_methods</name>
</property>
</options>
</protoModule>
</protoModules>
</configuration>
<executions>
<execution>
<id>generate-sources</id>
<phase>generate-sources</phase>
<goals>
<goal>compile</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-core</artifactId>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-maven-plugin</artifactId>
<version>1.0.7</version>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-codegen</artifactId>
<version>1.0.7</version>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-core</artifactId>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-maven-plugin</artifactId>
<version>1.0.7</version>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-codegen</artifactId>
<version>1.0.7</version>
</dependency>
<dependency>
<groupId>com.dyuproject.protostuff</groupId>
<artifactId>protostuff-compiler</artifactId>
<version>1.0.7</version>
</dependency>
</dependencies>
</project>
Any help will be appreciated. Sorry am a newbie :)
First try to build the project on the command line: mvn install. That should succeed.
But it looks like it won't, as it is looking for a SNAPSHOT dependency version of ${protostuff.version}. When I look in the Maven central repository, there's really only release versions (as it should be). Somehow you have to fix that, probably in your parent project.
The POM file should be in the root of the project and called pom.xml. Where you find the POM file called pom.xml is the root of the project :)
Only use eclipse:eclipse as a last resort. If you have free choice of Eclipse, and you have no wizardry in your Maven projects, you should be able to use the m2e (m2eclipse) Eclipse plugin.
That's an Eclipse plugin, not a Maven plugin, so no additional steps are needed on the command line. Just go into Eclipse, make sure the m2e plugin is installed. Then import your project (Import, "Existing Maven Projects").
All the files that Eclipse needs for its own bookkeeping should be created upon import and be based on the POM file. I.e. .classpath, .project and .settings (folder). If you have any of those prior to importing into Eclipse, you may be better off removing them (they may be remnants of your eclipse:eclipse attempts.
I'm trying to upload a file using an Ant task. If I use Ant directly the file is uploaded, but if I call the ant task via Maven (using the maven-antrun-plugin) I get the following error:
An Ant BuildException has occured: The following error occurred while executing this line:
/home/me/proj/build.xml:15: Problem: failed to create task or type ftp
Cause: the class org.apache.tools.ant.taskdefs.optional.net.FTP was not found.
This looks like one of Ant's optional components.
Action: Check that the appropriate optional JAR exists in
-ANT_HOME/lib
ant-commonsnet.jar is clearly available to Ant:
$ ls $ANT_HOME/lib | grep ant-commons-net
ant-commons-net.jar
Is the Ant classpath defined separately for maven-antrun-plugin, or am I missing something?
ant-commons-net.jar is clearly available to Ant
Yes, but Maven and the maven-antrun-plugin is not using your local Ant install.
Is the Ant classpath defined separately for maven-antrun-plugin, or am I missing something?
The way to use Ant Tasks not included in Ant's default jar is documented in Using tasks not included in Ant's default jar (which should definitely help):
To use Ant tasks not included in the
Ant jar, like Ant optional or custom
tasks you need to add the dependencies
needed for the task to run to the
plugin classpath and use the
maven.plugin.classpath reference if
needed.
<project>
<modelVersion>4.0.0</modelVersion>
<artifactId>my-test-app</artifactId>
<groupId>my-test-group</groupId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>1.6</version>
<executions>
<execution>
<id>ftp</id>
<phase>deploy</phase>
<configuration>
<target>
<ftp action="send" server="myhost" remotedir="/home/test" userid="x" password="y" depends="yes" verbose="yes">
<fileset dir="${project.build.directory}">
<include name="*.jar" />
</fileset>
</ftp>
<taskdef name="myTask" classname="com.acme.MyTask" classpathref="maven.plugin.classpath"/>
<myTask a="b"/>
</target>
</configuration>
<goals>
<goal>run</goal>
</goals>
</execution>
</executions>
<dependencies>
<dependency>
<groupId>commons-net</groupId>
<artifactId>commons-net</artifactId>
<version>1.4.1</version>
</dependency>
<dependency>
<groupId>ant</groupId>
<artifactId>ant-commons-net</artifactId>
<version>1.6.5</version>
</dependency>
<dependency>
<groupId>ant</groupId>
<artifactId>ant-nodeps</artifactId>
<version>1.6.5</version>
</dependency>
</dependencies>
</plugin>
</plugins>
</build>
</project>
As Pascal has mentioned, the maven-antrun-plugin is not using the ant specified by your $ANT_HOME environment variable, and the configuration that he's mentioned is probably the best way to do it consistently from a pure maven perspective.
However, the jar can be stored in $USER_HOME/.ant/lib instead of $ANT_HOME/lib, these jars should be available on the classpath for any instance of ant that is run by that user.
Note that your ant script cannot assume that the jars are present, and that the jars are only placed on the classpath at startup, so if the script defines a setup target to download the jars into $USER_HOME/.ant/lib, then this target would have to be run in a "separate-ant-session", before and is invoked again to execute the task that depends on the jar.
The only potential benefit that you may derive from this approach is that the Ant script may be runnable from maven and Ant.
There is a classpath property which can be set in <tasks> section of maven-antrun-plugin.
For instance,
<property name="classpath" refid="maven.compile.classpath"/>