I have a Model called Category and another called Articles. Categories are "sections" that have many Articles, for instance News and Events. Both Categories use the kind of Articles, except they're shown under a different section of my website.
Right now I'm creating the News controller (NewsController), and I'd like to visit /news/new to add News. Likewise, the same would apply to EventsController and /events/new.
What do I have to use on my routes to do this?
My first attempt was to use:
resources :categories do
resources :articles, path: '/news'
end
But this forces me to use /categories/1/news/new, which is kinda ugly.
If News will always be category_id 1 and Events will always be 2, how would I specify this on my routes, so I can easily access them with the URLs I mentioned?
Explained Differently
I have an Articles model. I'd like to have a controller called NewsController to handle Articles, so that /news/new (and the rest of the paths) would work with Article. I'd also like to have a controller called EventsController that would also handle Articles, so that /events would also work with Article. The difference between them is that they have different category_id.
Is this possible to do via routes?
Update
Made some progress.
resources :categories do
resources :articles
end
get 'news/new' => 'articles#new', defaults: {category_id: 1}
get 'events/new' => 'articles#new', defaults: {category_id: 2}
This fixes what I wanted to do with /news/new and /events/new, but I'd be missing the rest of the routes (edit, show, update, etc). Also, this makes me use the Articles controller, which currently does not exist and would also make the News controller obsolete/useless.
My logic may be wrong, it's kinda evident with what I just made, but perhaps with this update I can better illustrate what I'm trying to do.
Update 2
I'm currently testing the following:
resources :articles, path: '/news', controller: 'news'
resources :articles, path: '/events', controller: 'events'
So far it makes sense, it makes the routes I wanted, it uses both controllers with their own configurations, and it hasn't spat any errors when I visit both /news and /events (yet).
It's also possible to do:
resources :articles, path: '/news', defaults: {category_id: 1}
resources :articles, path: '/events', defaults: {category_id: 2}
But this would depend on an Article controller, which could handle both types of Categories. Either solution works (theoretically), though I'd incline more on the first since the individual controllers would allow more specific configuration to both cases. The second, though, is more adequate when there're not that many difference between the Articles being created. The defaults property isn't explicitly necessary either, I just put it there for convenience.
Your question is asking something that I question as not making sense and maybe your design is flawed.
Why would you have news resources related to category resources if they are not related?
Is categories just a name space?
If news records really are always going to be related to the same first category as your question implies then you can not use ID's as you have no control over what the id will be for the first category and the first category could have an ID of anything in which case you could just use the top level news resources and do a find first category in your model in a before create then you don't have to worry about an ugly url.
If news records really are related to categories then the you must supply the relevant category id and nest your routes but you could pretty up the url using the following from
https://gist.github.com/jcasimir/1209730
Which states the following
Friendly URLs
By default, Rails applications build URLs based on the primary key --
the id column from the database. Imagine we have a Person model and
associated controller. We have a person record for Bob Martin that has
id number 6. The URL for his show page would be:
/people/6
But, for aesthetic or SEO purposes, we want Bob's name in the URL. The
last segment, the 6 here, is called the "slug". Let's look at a few
ways to implement better slugs. Simple Approach
The simplest approach is to override the to_param method in the Person
model. Whenever we call a route helper like this:
person_path(#person)
Rails will call to_param to convert the object to a slug for the URL.
If your model does not define this method then it will use the
implementation in ActiveRecord::Base which just returns the id.
For this method to succeed, it's critical that all links use the
ActiveRecord object rather than calling id. Don't ever do this:
person_path(#person.id) # Bad!
Instead, always pass the object:
person_path(#person)
Slug Generation
Instead, in the model, we can override to_param to include a
parameterized version of the person's name:
class Person < ActiveRecord::Base def to_param
[id, name.parameterize].join("-") end end
For our user Bob Martin with id number 6, this will generate a slug
6-bob_martin. The full URL would be:
/people/6-bob-martin
The parameterize method from ActiveSupport will deal with converting
any characters that aren't valid for a URL. Object Lookup
What do we need to change about our finders? Nothing! When we call
Person.find(x), the parameter x is converted to an integer to perform
the SQL lookup. Check out how to_i deals with strings which have a mix
of letters and numbers:
"1".to_i
=> 1
"1-with-words".to_i
=> 1
"1-2345".to_i
=> 1
"6-bob-martin".to_i
=> 6
The to_i method will stop interpreting the string as soon as it hits a
non-digit. Since our implementation of to_param always has the id at
the front followed by a hyphen, it will always do lookups based on
just the id and discard the rest of the slug. Benefits / Limitations
We've added content to the slug which will improve SEO and make our
URLs more readable.
One limitation is that the users cannot manipulate the URL in any
meaningful way. Knowing the url 6-bob-martin doesn't allow you to
guess the url 7-russ-olsen, you still need to know the ID.
And the numeric ID is still in the URL. If this is something you want
to obfuscate, then the simple scheme doesn't help. Using a Non-ID
Field
Sometimes you want to get away from the ID all together and use
another attribute in the database for lookup. Imagine we have a Tag
object that has a name column. The name would be something like ruby
or rails. Link Generation
Creating links can again override to_param:
class Tag < ActiveRecord::Base validates_uniqueness_of :name
def to_param
name end end
Now when we call tag_path(#tag) we'd get a URL like /tags/ruby. Object
Lookup
The lookup is harder, though. When a request comes in to /tags/ruby
the ruby will be stored in params[:id]. A typical controller will call
Tag.find(params[:id]), essentially Tag.find("ruby"), and it will fail.
Option 1: Query Name from Controller
Instead, we can modify the controller to
Tag.find_by_name(params[:id]). It will work, but it's bad
object-oriented design. We're breaking the encapsulation of the Tag
class.
The DRY Principle says that a piece of knowledge should have a single
representation in a system. In this implementation of tags, the idea
of "A tag can be found by its name" has now been represented in the
to_param of the model and the controller lookup. That's a maintenance
headache. Option 2: Custom Finder
In our model we could define a custom finder:
class Tag < ActiveRecord::Base validates_uniqueness_of :name
def to_param
name end
def self.find_by_param(input)
find_by_name(input) end end
Then in the controller call Tag.find_by_param(params[:id]). This layer
of abstraction means that only the model knows exactly how a Tag is
converted to and from a parameter. The encapsulation is restored.
But we have to remember to use Tag.find_by_param instead of Tag.find
everywhere. Especially if you're retrofitting the friendly ID onto an
existing system, this can be a significant effort. Option 3:
Overriding Find
Instead of implementing the custom finder, we could override the find
method:
class Tag < ActiveRecord::Base #... def self.find(input)
find_by_name(input) end end
It will work when you pass in a name slug, but will break when a
numeric ID is passed in. How could we handle both?
The first temptation is to do some type switching:
class Tag < ActiveRecord::Base #... def self.find(input)
if input.is_a?(Integer)
super
else
find_by_name(input)
end end end
That'll work, but checking type is very against the Ruby ethos.
Writing is_a? should always make you ask "Is there a better way?"
Yes, based on these facts:
Databases give the id of 1 to the first record
Ruby converts strings starting with a letter to 0
class Tag < ActiveRecord::Base #... def self.find(input)
if input.to_i != 0
super
else
find_by_name(input)
end end end
Or, condensed down with a ternary:
class Tag < ActiveRecord::Base #... def self.find(input)
input.to_i == 0 ? find_by_name(input) : super end end
Our goal is achieved, but we've introduced a possible bug: if a name
starts with a digit it will look like an ID. If it's acceptable to our
business domain, we can add a validation that names cannot start with
a digit:
class Tag < ActiveRecord::Base #... validates_format_of :name,
:without => /^\d/ def self.find(input)
input.to_i == 0 ? find_by_name(input) : super end end
Now everything should work great! Using the FriendlyID Gem
Does implementing two additional methods seem like a pain? Or, more
seriously, are you going to implement this kind of functionality in
multiple models of your application? Then it might be worth checking
out the FriendlyID gem: https://github.com/norman/friendly_id Setup
The gem is just about to hit a 4.0 version. As of this writing, you
want to use the beta. In your Gemfile:
gem "friendly_id", "~> 4.0.0.beta8"
Then run bundle from the command line. Simple Usage
The minimum configuration in your model is:
class Tag < ActiveRecord::Base extend FriendlyId friendly_id :name
end
This will allow you to use the name column or the id for lookups using
find, just like we did before. Dedicated Slug
But the library does a great job of maintaining a dedicated slug
column for you. If we were dealing with articles, for instance, we
don't want to generate the slug over and over. More importantly, we'll
want to store the slug in the database to be queried directly.
The library defaults to a String column named slug. If you have that
column, you can use the :slugged option to automatically generate and
store the slug:
class Tag < ActiveRecord::Base extend FriendlyId friendly_id
:name, :use => :slugged end
Usage
You can see it in action here:
t = Tag.create(:name => "Ruby on Rails")
=> #
Tag.find 16
=> #
Tag.find "ruby-on-rails"
=> #
t.to_param
=> "ruby-on-rails"
We can use .find with an ID or the slug transparently. When the object
is converted to a parameter for links, we'll get the slug with no ID
number. We get good encapsulation, easy usage, improved SEO and easy
to read URLs.
If you are sure there will be only 2 categories, why not simply add a boolean to the articles?
Like: article.event = true if events category, false if news
Then you can add a scopes to Article class for both categories
class Article
scope :events, -> { where(event: true) }
scope :news, -> { where(event: false) }
end
Create controllers, for example:
class EventsController < ApplicationController
def index
#articles = Article.events
end
def create
#article.new(params)
#article.event = true
#article.save
end
...
end
and routes: resources :events
You should try to use dynamic segments: http://guides.rubyonrails.org/routing.html#route-globbing-and-wildcard-segments
Add some slug attribute to Category, it should be unique and add index to it.
# routes
resources :articles, except: [:index, :new]
get '*category_slug/new', to: 'articles#new'
get '*category_slug', to: 'articles#index'
# controller
class ArticlesController < ApplicationController
def index
#category = Category.find_by slug: params[:category_slug]
#articles = #category.articles
end
def new
#category = Category.find_by slug: params[:category_slug]
#article = #category.articles.build
end
...
end
Remember to put a category in a hidden field in the form_for #article
I am trying to show username instead of user_id i.e., (users/4).
i have tried with changing routes file, model file as:
class User < ActiveRecord::Base
def to_param
username
end
end
and routes file as:
get '/:username' => 'users#show'
on show action it must show as fb.com/username url.
thanks in advance.
You may use friendly_id gem for this. Here is Rails cast : Pretty URLs with friendly_id On how to use it. You can use the attribute/column you want in the URL.
With FriendlyId, it's easy to make your application use URLs like:
http://example.com/states/washington
instead of:
http://example.com/states/4323454
I have a site that currently has URLS that look like this
http://localhost:3000/public/category/1?category_id=1
That the SEO guy has requested be changed to this
http://localhost:3000/(:category_name)-leasing
where (:category_name) is the name of the category referenced by category_id=1 and is appended with "-leasing"
Is it possible to set this up without creating a new column in my category model for a permalink.
Currently I also have this in my routes.rb file:
get ':permalink', :to => 'public#show'
which displays items from the category mentioned above as
http://localhost:3000/item-name-from-permalink
Is this going to prevent a category using the same url structure? will rails be able to distinguish between a :permalink and a (:category_name)-leasing url or will the url need to something like:
http://localhost:3000/category/(:category_name)-leasing
Thanks in advance
class Category < ActiveRecord::Base
def to_param
"#{self.id}-#{self.title.parameterize}"
end
end
will produce url like http://localhost:3000/categories/1-some-good-title
I have a question about browser string in rails.
For example i have rails app with routes:
resources :posts
and this resource create :
post/:id
post/21
post/167
post/356
but i create a simple blog and i want to rename ':id' to
post/some-name
post/another-name
post/another-different-name
in post i have title, text field
but i dont know how do this
I know that this can be achieved through manipulation of the :id
can you post some link with detailed answer on this question, or some simple example
You can of course put anything you want in the URL and actually there is railcast about it:
http://railscasts.com/episodes/63-model-name-in-url
It is preferable (read: easier) to also keep model.id in the URL, or it means that post name MUSTÂ be unique, otherwise you can put anything you want:
/post/2465-my-pretty-post-name
Also, there is a gem friendly_id and related railcast:
http://railscasts.com/episodes/314-pretty-urls-with-friendlyid
Hope that helps.
Why do you want to change /post/:id ?
You can achieve something like /post/:id/comments
You can do that using nested resources like this in your routes.rb
resources :posts do
resources :comments
end
Check here for more details
http://guides.rubyonrails.org/getting_started.html
If you add the to_param method to the model then you can use that within your URL system.
class SomeModel < ...
def to_param
self.title
end
end
Then inside your controller, setup a filter to fetch the model using the title attribute instead of the ID attribute which is used for the find method.
before_filter :setup_record
def setup_record
#record ||= Record.find_by_title(params[:id])
end
You will have to ensure that your title stays unique and if you change it then you will either have to discard all other previous URLS or keep a history of older names.
I want to be able to have post permalinks appear in the root of the site. So, for example, a post with a permalink "hello-world" should appear as "mysite.com/hello-world", instead of "mysite.com/posts_controller/hello-world."
How would I go about doing something like this?
I believe that you already have a "slug" field in your posts model.
If your post controller has that into account, you just need to add the correct route for instance:
match '/:slug' => "Posts#show"
Otherwise, if don't have the slug in your model, you can use the Stringex plugin. It's an easy way to automatic create slugs for your posts.
class Post < ActiveRecord::Base
acts_as_url :title
end
It will create the slug from your title and save it to the slug column.
In the controller you can find the correct post like this:
def show
#post = Post.find_by_slug(params[:slug])
end
In your routes:
match '/:slug' => "Posts#show"
Then in your controller you could do something like:
Post.find_by_slug(params[:slug])
Note: you will need to generate this slug value and store it in the Post model.
Also have a look at friendly_id for a tried and tested way of doing this (if you need something more complex).