I created a repository on OS X Server called myTestRepo. For HTTPS Access, I am allowing logged in users to read and write.
When I try to add this repository in Xcode, I get an error.
In repository address, if I enter
ssh://iMac/git/myTestRepo.git
I get the following error
Could not read from remote repository.
If I enter
https://iMac/git/myTestRepo.git
I get the following error
fatal: unable to access 'https://iMac/git/myTestRepo.git/': Could not resolve host:iMac
What am I doing wrong?
This could be a DNS problem in your local network:
Try substituting "iMac" with the IP adress of the computer hosting the repo:
ifconfig |grep inet
(in Terminal) will print out your local IP (e.g. 192.168.18.15).
If this doesn't help try pinging the IP / Computername (iMac) to see if you are able to connect to the computer:
ping iMac
ping 192.168.18.15
I also found a good tutorial on how to setup git Mac OSX Server. http://www.tomdalling.com/blog/software-processes/how-to-set-up-a-secure-git-server-at-home-osx/
Pay attention to the port forwarding section, did you forward ports correctly?
Related
Unable to access localhost Jenkins from another computer in the same network. These are the steps I did
1) I pinged the ip address of the computer from another computer and it is successful
2) I change the Jenkins URL in the config to - http://[IP of the machine:8080]
3) Turned off the firewall.
However I am not able to access this url from the same computer or another computer - http://[IP of the machine:8080]
Any time would be appreciated. Followed all the steps, not sure if i need to use a service like xamp or mamp
i also did ifconfig and this is what i got. My jenkins port is running on :8080 and i dont know what url to add to my jenkins so i can access it from other network within the same computer
Also what other steps i need to do, do i need to open the port from somwhere?
For Instance, your IP of Jenkins master is 192.169.x.x.
Open the Port 8080 via firewall and then change the URL of jenkins from "Manage Jenkins >>Config Sys >> Jenkins Location>" to "http://192.169.x.x:8080"
Now you can access it from other machine on same network domain.Just have to hit the url http://192.169.x.x:8080
You can now create different users with different privileges for the same.
You can find it under Manage Jenkins >> Manage Users >> Create Users.
I'm trying to create a Test automation Pipeline to run my selenium scripts, I installed Jenkins in windows Remote Server 2012. Used following cmd($ java -jar jenkins.war) to start jenkins. It is working fine in Remote server with url:http://localhost:8080/
But when I'm trying to access it outside Remote server(my local machine) it is not working. am getting error message "This site can’t be reached"
My local laptop and Remote server is under the same proxy org network.
Can someone help how to resolve this issue , so that other folks can access it and run jobs when required from their laptops
Thanks in advance
Access Windows Firewall.
Add an inbound rule to allow port 8080 and
try accessing the url from any machine in the network.
you could allow/restrict access to all IPs, range of IPs or allow all. But to nullify the issue and confirm if its an issue with whitelisting IPs, I'd first allow access from all IPs with the wildcard *
for Debugging if its a port whitelisting issue, you could also telnet from the machine that you are trying to access this machine -
try
telnet remote machines IP Port
note: do not use a colon for port input just use a space
I've installed a Crate DB on a Virtual Machine Ubuntu (xenial).
Since I want to connect to it from both my VM and my Windows host, I've tried to set the VM's IP on both params in crate.yml:
network.host
network.publish_host
The rest of the parameters I can see in crate.yml
But that won't do the trick (I get ERR_CONNECTION_TIMED_OUT error when I try to connect to "my_VMs_ip:4200" from my Windows host PC) and I can't find any way around it on crate.io nor on Google.
Would any of you have an idea?
Thanks a lot
NB: I'm running Crate 2.0.7
Possible to Change Jenkins URL? : http://localhost:8080
Currently I have jenkins setup on a virtual machine.
Is it possible to setup Jenkins on a URL which is more is accessible for other users?
For example I dont want other users to access test results by connecting to the Virtual machine instead I want them to access a URL from their own device in turn enabling them to login and see test results via jenkins.
thanks for you help
Let's say IP of your virtual machine is 192.168.x.x.
Open the Port 8080 via firewall and then change the URL of jenkins from
"Manage Jenkins >>Config Sys >> Jenkins Location>" to "http://192.168.x.x:8080"
Now you can access it from other machine on same network domain.Just have to hit the url http://192.168.x.x:8080
You can now create different users with different privileges for the same.
You can find it under Manage Jenkins >> Manage Users >> Create Users.
It is related to networking. The machines should be on the same network, so they can talk to each other (unless you have public IP).
The ONLY rule to give access is, that machines can talk to each other (of course, in their language, 0's & 1's).
I suggest following things to do to share the URL:
Ask the users to connect to the same network that your machine is in.
Verify whether they are able to PING your machine IP (get it from ipconfig command for windows - router assigns IP for your machine, that starts with 192.168 or 10.10). command example: ping 10.10.1.10
If any issues in Ping, it might be Windows Firewall or Anti-virus which might be blocking, so allow the IPs in your firewall so they can access your machine.
Then ask them to access Jenkins using the following URL http://[IP of your machine:8080]
We want the Jenkins web interface to be accessible from anywhere (not
just on the local machine), so we’re going to open up the config file:
sudo nano /usr/local/opt/jenkins-lts/homebrew.mxcl.jenkins-lts.plist
Find this line:
<string>--httpListenAddress=127.0.0.1</string>
And change it to:
<string>--httpListenAddress=0.0.0.0</string>
RF : Installing Jenkins on macOS
I'm brand new to RoR and have pretty much 0 experience with it. I have been handed down somebody else's project and I need to find a way to host the application, so people can just access it locally. The application is a spider script/walker script/web scraper whatever you call it. Basically it connects to a website, logs in, retrieves certain data each day and maps it with the previous data. While on the local machine, you use it, go to localhost:3000, and you get the webpage the previous person designed. I was just wondering how I could get that page to be public for the people on our local network, so they could connect to some arbitrary IP and see the same page (it updates daily)?
What I tried doing is making the folder containing the application public to the network, but in order to use it, I would have to make everybody on the network allowed to write to it and each person would have to install RoR to use it. I want to avoid that since it doesn't seem logical, nor is it what I'm trying to do.
Looking at the code, I can reverse engineer and understand what it does, but when it comes to hosting web apps locally or something of that sort, I have never done this before. Please help!
Thanks in advance!
**EDIT
-This is all being done on a Windows 7 machine.
Since you're on Windows, open up a command line and run ipconfig to find out your local IP. It will be listed under 'IP Address'.
Tell people in your LAN to access http://192.168.x.x:3000 replacing 192.168.x.x by your IP address from step 1.
EDIT: One major thing that I missed, you are windows. On windows u could use thin and put it behind a load balancer. Although i would suggest hosting it on a UNIX machine :)
Although Running it in webrick(webrick is the application server for development i.e when u run rails s) will let other users access the website NEVER do the same for a production application. If you want to run this application in production, u need more powerful application servers like passenger. I would suggest you use it with Apache or Nginx instead of stand alone passenger. Once all this is setup others can use your application by entering the IP(xx.xx.xx.xx) also u can ask your system admin to setup a local DNS so your users need not remember the IP address always.
Description:
While starting Rails Server, we can also setup some options to configure the IP address and also the port number of the site under development environment to host the website in local network. So if we want to change the IP from http://127.0.0.1:3000 to http://192.168.x.x:port (x= 0 to 255 any one number), we can set that in Rails server command! But for this, we will need to find out our current IP address at our current network which will help us to serve the website in local network.
So at first step:
We will open our terminal on our PC. For Android user, we need to open Termux app. Then simply type ifconfig to get the IP address of our device in the current network. We will get an output like this one (Here I'm using Android device for development. So output might be something different than this one on your PC terminal but the process is same):
$ ifconfig
Warning: cannot open /proc/net/dev (Permission denied). Limited output.
lo: flags=XX<UP,LOOPBACK,RUNNING> mtu XXXXX
inet 127.0.0.1 netmask 255.XXX.XXX.XXX
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen XXXX (UNSPEC)
wlan0: flags=XXXX<UP,BROADCAST,RUNNING,MULTICAST> mtu XXXX
inet 192.168.1.103 netmask 255.XXX.XXX.XXX broadcast 192.168.1.255
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen XXXX (UNSPEC)
X= some numbers with our device credentials which is dummied with this variable
If you are using a WiFi router then we will need the wlan0 part to get our device IP. Under wlan0 section there is a subsection of inet showing our current IP! YUP, we need that IP address 192.168.1.103! This might be different for your device and network. This is the key of this mission! Now we're going to the second important step.
So the Second Step is:
That required input command to configure the IP address.
rails s -b 192.168.1.103 -p 8080
Here:
rails s for rails server
-b 192.168.1.103 for bidding the IP address for customisation from the default IP http://127.0.0.1 which is our localhost address.
-p 8080 for port setup. This part is optional. Default port is 3000.
This is the process of changing the localhost IP (http://127.0.0.1) to local network IP which will be available for other device of the same network user.
Now our rails app is available in our local network! Other users in the same network will also be able to visit the website while the server command is running. And the link will be http://192.168.1.103:8080 if you also configure the port number. Otherwise if you have used the command rails s -b 192.168.1.103 without port configuration the link will be: http://192.168.1.103:3000
Again: 192.168.1.103 was for my case, your IP address will be different for your device. That will be needed to use for your server and link address.