I've been facing this issue from past 2 weeks and not yet got a solution.
I'm using UIScrollview in my application where the problem exists.
Generally in my app, there is dynamic text and images with different sizes will come from webservices. For example, imagine the Facebook Newsfeed. My application is similar to the Facebook newsfeed. Sometimes, there will be only text, sometimes there will be text and images. And comments for that post.
As i've seen in many links, the heirrarchy i'm following is SuperView-->UIScrollView-->Content View and the elements are placed in that content view. I'm assigning the constraints from the elements in the contentview to the Superview (ContentView --- constraints -- SuperView). When the content in the view exceeds the size of the superview, it has to scroll. But the scrollview content size is limited to the size of 600x600 i.e., in main.storyboard, when we design for W any x H any size. I've seen many tutorials and searched many sites. But following them gives me no luck.
Any help is appreciable.
Here is how to set up a scrollView in Interface Builder from scratch that works with Auto Layout.
Start with a new ViewController. Drag out a scrollView such that it fills the view. Untick Constrain to margins and constrain the left, top, right, and bottom edges of this scrollView to the left, top, right, and bottom of its superview with offsets of 0. This allows the scollView to fill the screen on any device in any orientation. You can make your scrollView take up less of the screen if you like, just make sure it is fully contrained.
Add a view to your scrollView. This should be the only top level view on your scrollView and it will serve as your contentView.
Constrain the left, top, right, and bottom edges of this contentView to the left, top, right, and bottom of the scrollView with offsets of 0. At this point, you will see warnings about ambiguous content size. That is because you haven't told it yet how big your content view will be.
To size the contentView, add width and height constraints to the contentView. If you want it to scroll, the width and height must be larger than the width and height of the scrollView itself. If you only want to scroll vertically, set the width of the contentView to be equal to the width of the scrollView. To do this, in the Document Outline view, control-drag from the contentView to the scrollView and select Equal Widths from the pop up.
If you want to be able to change the height of your contentView from code (to account for dynamic content), first create a height constraint for your contentView by control-dragging within the contentView and selecting Height from the pop up. Create an IBOutlet to the height constraint by control-dragging from the height constraint (found in the Document Outline view) to your ViewController's code. Give the outlet a name like scrollViewHeight then set the height with a value like scrollViewHeight.constant = 2000 when you need to change the scrollView's height.
Simply add your UIScrollView to your UIViewController's view in the storyboard and add the appropriate constraints in the interface builder.
Then, build your content view in the code and give it any frame you want, now start adding your controls to this content view and calculate the size of each one (especially the height), and at the end you have the total height of your controls.
Now set the frame of the content view to match that height and add it as a sub view to your scroll view, then set the content size in the code like this:
_scrollView.contentSize = contentView.frame.size;
Another note, do this changes to the sizes in the viewDidLayoutSubviews to avoid any problems with different screen sizes but be careful, this event is called many times so have a BOOL or something to ensure that the code that creates the view and add it to the scroll view is executed once, e.g. like this
- (void)viewDidLayoutSubviews {
[super viewDidLayoutSubviews];
if (! built) {
// Do everything I explained above here
built = YES;
[self.view layoutSubviews];
}
}
Related
I created a scrollview in storyboard with multiple views but the scrollview does not scroll. See the screenshot. I have a scrollview with images and another view embedded that spans outside the view area. I would like the scroll view to scroll down but it does not when I see the code in the simulator.
You need to add a UIView with 1000(or whatever you want) height constant to scrollView and make the UIView equal width to view
ScrollView needs to know its scrollable area, so you need to provide information about width and height for ScrollView's content:
width - you can create empty view (with height constraint equal to 1), place it inside scrollView, set its leading and trailing constraints to scrollView and set width constraint equal to main view. Then, scrollView will know that its scrollable area has the same width as screen.
height - you need to provide top and bottom constraints for first and last components inside scrollView (and all components should have specified height). I guess you forgot about setting bottom constraint for the last item.
I have a view hierarchy that looks like this (based on other answers and Apple's advanced AutoLayout guide for working with UIScrollView):
The 2 steps required for ScrollView are:
Set up constraints for position and size (frame) of ScrollView: The same way you do it with any other view.
Set up constraints for content size: By making sure that there are constraints from the ScrollView's subviews touching all edges (leading, trailing, top, bottom) of the ScrollView, if you're doing this in interface builder and not programmatically.
Step 1 worked fine at first and this was the result:
No problems with position and size as expected. I just need to define the content size (content height and content width) now in Interface Builder with Step 2.
Now I add the constraints touching all 4 edges of the ScrollView like so:
Suddenly, the ScrollView doesn't know it's position and size (frame) anymore.
I've looked at other answers and followed the various steps, but can't seem to resolve this issue. Sorry I'm not able to post Storyboard screenshots because of privacy issues
Set the scroll view's top, bottom, leading, trailing constraints to its superview to 0.
Set the view that is inside the scroll view and set its top, bottom, leading, trailing constraints to its superview to 0.
Select the view that is inside the scroll view, go to the size inspector and set the "Intrinsic size" to "Placeholder".
Scroll views can be a little tricky at first. You really have 3 parts:
Actual frame of the scroll view
Actual frame of the subview(s) contained in the scroll view
The contentSize of the scroll view - that is, how far it should scroll in either direction
So, 1. is pretty straight-forward.
The second part also seems straight-forward, except that we tend to "pin" subviews to the inside edges of their superviews. In the case of scroll view subviews, those constraints are what defines the contentSize. You also have to make sure the subviews have a "size".
Starting with just one subview, you would:
set the scroll view's constraints as "normal".
set the size of the subview - just for demo purposes, set it to 100 x 100
pin all four edges of the subview to the four edges of the scroll view
Run the app. Assuming you set background colors so you know what you're looking at, you should see the scroll view positioned and sized as you'd expect... you should see the subview of 100 x 100 sitting somewhere inside the scroll view... and you will likely not be able to do any actual scrolling.
If you go back and change the subview to, say, 100 x 800, and still have its bottom constraint pinned to the bottom of the scroll view (the subview's superview), and run the app again... You should be able to scroll up and down for the full 800 pt height of the subview.
The way to think about it is: the scroll view's content - whether it's one or many subviews - has to define its own size, which will define the scrollable area (the scroll view's contentSize).
Hope that makes sense!
I am creating a UIScrollView from xib, in which 3 view are there 2 UIViews and in middle an UIImageView. when I am setting constraints Xcode asked to set Y position constrains. But the problem is Y position constraint is blocking Scrollview to scroll down and automatically adjusting the views which looks ugly in landscape mode.
when I am delete that constraint it ask to fix height of subview. I searched a lot but I am new in autolayout so not understanding many of solutions. any help would be great.
You have to set all the height constraints in the content view.
But you also want the height of the Content to be proportional to the screen size.
To do this assign the height constraint of the imageview [equal|proportional|a-computation-of] to the view containing the UISCrollView.
It seems weird to skip levels of herarchy when assigning constraints between two views whose are not direct ancestor/sibling of each other but within a scrollview (at least) it is perfectly acceptable.
You are basically telling the scrollview that it's content has a known size and at same time setting this content to adapt dinamically to the screen size (if the constraints of the root uiview are set correctly)
UIView1
|---UIScrollView
|---UIView2
|---UIImageView [heightConstr.constant=UIView1.height-UIView2.height-UIView3.height-margins]
|---UIView3
This is the basic idea, to be done programmatically, then you can explore other solutions.
Unfortunately the constraint system in ios pretty much sucks when it's up to more complex equations involving more views for a single constraint.
UIScrollViewcan be tricky when adding constraints. You should always add a subView that will behave as the content view for your UIScrollView and all your subsequent views will go inside this content view.
UIView1
|---UIScrollView
|---UIContentView
|---UIView2
|---UIImageView
Set your UIScrollViewconstraints as you would normally but set your content view to have leading, trailing, top and bottom to the UIScrollView but also add two more constraints which will be equal width and equal height to the viewController.view but will have a low priority (So that whichever direction your content will increase in, that constraint will break and automatically increase the content size of the scroll view by taking in the inferred height of the content view). Now go on and add constraints on all your subview as you normally would. Which i'm assuming would be:
Your topmost view will have top and leading and trailing to its superView and also a fixed height.
Your bottom view will have leading, trailing and bottom to its superView and also a fixed height.
Your UIImageViewwill have a leading, trailing and top to top most view and bottom to the bottom view.
Edit:
Here is the screenshot just in case (To show the view hierarchy with the content view's constraints in the inspector)
I want to do something simple, yet Apple loves to overcomplicate things for developers (quite ironic). I want to create a vertically scrollable screen. Basically a longer screen that I can scroll through. The problem is that it either doesn't scroll or the content (a label for demo purposes) is fixed on the screen (e.g. centered).
I looked at multiple tutorials but still didn't fully understand it because the inner workings aren't fully explained.
So from what I understand, it goes the following:
You place a UIScrollView on top of the main UIView
You set the UIScrollView's margins to 0-0-0-0
You place a content view UIView inside the UIScrollView
You set it's margins to 0-0-0-0 related to both the main UIView and the UIScrollView
You set the UIScrollView and content UIView's height & width (in my case I chose 1000 for height and screen width for width since I want only vertical scroll)
You set the UIScrollView.contentSize to something bigger than the screen
You add the content and align it to the content UIView
So what am I missing or adding when I shouldn't? If anyone can explain how this is done quickly, please do so.
Quite a lot of this is wrong:
So from what I understand, it goes the following:
You place a UIScrollView on top of the main UIView
You set the UIScrollView's margins to 0-0-0-0
You place a content view UIView inside the UIScrollView
You set it's margins to 0-0-0-0 related to both the main UIView and the UIScrollView
You set the UIScrollView and content UIView's height & width (in my case I chose 1000 for height and screen width for width since I want only vertical scroll)
You set the UIScrollView.contentSize to something bigger than the screen
You add the content and align it to the content UIView
There are various strategies for making a scroll view scrollable under auto layout. The "content view" strategy is perfectly valid, and very convenient, though it is not the only possible strategy. Since you seem to imply you want to use it, let's use it:
Pin the scroll view's top, bottom, left, and right with constraints to main view. Typically these constraints will have a zero constant, but no law requires this.
Give the scroll view exactly one immediate subview, a "content view". Pin the content view's top, bottom, left, and right with constraints to the scroll view. These constraints must have a zero constant.
Give the content view height and width constraints. Set their constant values absolutely. Experimentally, use large numbers. As you've said, width of zero and height of 1000 will give you vertical scrolling on a screen smaller than 1000 height.
Now stop. Don't add any more constraints, and don't set the scroll view's content size in any other way. You are finished. The scroll view is now scrollable, even though there is nothing visible inside it — provided the height or width constraints constant values are larger than the actual height or width of the scroll view at runtime. And you can run the project and see that this is true.
You are now free to populate the content view.
You don't have to put a UIView inside the scroll view. You can just add whatever objects you want and set objects frame within the scrollview. The scrollable area is set by the contentSize property of UIScrollView.
Some things you will want to make sure to do:
1) Add <UIScrollViewDelegate> to your .h file
2) set scrollview.delegate = self;
3) Set scrollview.contentsize = CGSizeMake(something bigger than the screen)
4) make sure the scrollview is scrollable with scrollview.scrollEnabled = YES;
I wanted to add some labels and textfields on my view and that view should scroll, so I am thinking of putting view on scrollview.
I wanted to add some labels and textfields on my view
And that view should scroll
So I am thinking of putting scrollView
And then I wanted to put my view having labels and Textfields
Is it possible?
Please check scrollview property Bounces Vertically is checked or not if not check it
May be, your content is less, than ScrollView, that's why scrolling is disabled
Put view with labels in scrollview. Scrollview should be less in height than view. View should have height considering all ui cvontrols in it. should work like this
Make sure your scroll view height is not greater than view its content size has to be greater as all people says. You get confused between content size and scroll view height.
Meas using nib suppose your scroll view height is 300 and when you use the code content size should be greater than 480 so it will be scroll-able on iPhone 4 size device who's height is 480
To make sure your constraints are well defined, first check these steps:
Make sure your base view is a UIView
Put into a UIScrollView and add constraints to the edges of UIView
Put into the scrollview a UIView and add constraints to the edges of the scrollview. I call this "content view".
You should assign a width to the content view. I usually set the width of the content view equal to the width of the scrollview.
Put your labels/views/images/whatever into the content view and use autolayout constraints to resize them automatically to fit the target screen.
Please consider that:
Your scrollview must always have a height, fixed or dynamic. In order to avoid errors with autolayout, consider that:
the last element on the bottom of the content view must always have a constraint to the bottom edge of the scrollview, or
the content view must have a fixed height
If the height of your content view is less than the height of the scrollview, the view will not scroll. You should add more views or more margin to the bottom constraint of the content view.