Developing a NAS system at the moment and I want to use SMART to monitor the state of the harddrive in the NAS. I have looked at tools like smartmontools smartctl and smartd however I want to have more control over the what I tell the NAS to react to when different errors occur. smartd supports running scripts but it is not preferable. Is there an api preferable in c that one can use to speak with a SMART HDD?
Related
I am working on a project that will essentially run each part of a program on a complete separate computer. Reason for this because these are data servers, gaining data from a target program launched on the main users desktop. (very CPU intensive)
The application just needs to be able to send data and things like this across a network.
One is a Console app and the other is a C# made operating system(Technically WPF, but replaces windows and just leaves a kernel).
So how would I go about doing this?
Since both applications are in C#, the easiest way will be to use Windows Communication Foundation (WCF) - https://msdn.microsoft.com/en-us/library/ms734712(v=vs.90).aspx
It allows you call remote methods as though they are just plain local methods.
Is it possible to access my Cisco router details like Name,Model,IP Address,Connection status etc from my iOS mobile.
I'm even ready to write small mobile app in iOS to get all router details.
Since I have just started learning in iOS, don't know if any library already exists for above task.
If my router does not work or gets hang.. I even want to try for restart of router using my mobile.
If example code exist, it will be very useful.
Like Cisco already has andriod and iOS app for same above function but dont want to use this app and want to write my own app with limited features only.
(http://www.addictivetips.com/mobile/cisco-connect-express-manage-router-settings-remotely-android-ios/)
Thanks,
Accessing network gear is best done by using SNMP. Cisco has extremely rich management/monitoring capabilities via SNMP and all of their MIBs are publicly available here.
Almost all Cisco gear supports the SNMPv2-SMI MIB (the 1.3.6.1.2.1 OID) so querying things like sysName, sysLocation, sysContact, sysDescription, sysUpTime should be very easy. This MIB even supports tables for listing all the interfaces and IP addresses and has a whole lot of other things that might be of interest to you.
If you have SNMP write access on the device then you can even make config changes and perform management functions like rebooting or bringing an interface up/down.
There are a few SNMP libraries for ObjectiveC and I think Net-SNMP is the most popular (It's not .net even though the title suggests that).
If you are new to SNMP then I suggest starting simple by querying easy objects like 1.3.6.1.2.1.1.5 (sysName) and 1.3.6.1.2.1.1.6 (sysLocation) before trying to jump into tables like 1.3.6.1.2.1.2.2 (ifTable)
Remember, you don't have to stick with the standard MIBs you can download all of the custom ones that are particular to your device which will give you incredible amounts of flexibility.
You could use a screen-scraping technique to telnet or ssh to the Cisco device and parse the "show version" output. This will give you some of the information you need. For others, like IP addresses, you can use "show ip interface brief", "show cdp neighbors" etc. as you need.
Keep security in mind: make sure that telnet/ssh credentials are adequately protected in your app's settings, and try to restrict your commands to those that do not need privileged access on the Cisco device.
Be aware that Cisco devices have a small pool of available VTYs, and every telnet/ssh access from your app will use up one VTY. So if you have for example 30 guys wanting to use the access the device simultaneously from their apps, some of those instances are not going to get access to the device.
If this is a concern, SNMP is a better and more scalable option as suggested by previous answer. Make sure that you (a) have a read-only community string configured on the device, and (b) use only the ro community string from the app.
I have a Raspberry PI that is tightly coupled with a device that I want to control.
The desired setup I want to have would look something like this:
The physical device with interactive hardware controls on the device (speaker, mic, buttons)
A Raspberry PI coupled to the device
On the PI:
A daemon app that reacts to changes from the hardware
A Webinterface that shows the current state of the device and allows to configure the device
The system should somehow be able to update itself with new software when it becomes available (apg-get or some other mechnism).
For the Webinterface I am going to use a rails app, which is not a problem as such. What is not clear to me is the event-driven software that is talking to the hardware through gpio. Firstly, I would prefer to do this using ruby, so that I don't have a big technology gap when developing the solution.
How can I ensure that both apps start up and run in the background when the raspberry PI starts
How do I notify the webapp of an event (e.g. a button was pressed).
I wonder if it makes sense that the two pieces of software have a shared database to communicate.
How to best setup some auto-update-mechanism for both pieces of software without requiring the user to take any actions.
Apps
This will be dependent on the operating system
If you install a lightweight version of Linux, you might be able to create some runtime applications or something. I've never done anything like this; but I know from Windows you can create startup programs -- likewise, you should be able to do something similar in Linux
BTW you wouldn't "run" the Rails app - you'll fire up the server to capture any requests. You'd basically run your app locally in "production" mode - allowing you to send requests, either through localhost, or setup a pseudo domain in the HOSTS file of your box
--
Web App
The web app itself is RESTful, meaning (I believe), it will only act upon having requests sent to it. Because this works over the HTTP protocol, it essentially means you'll need some sort of (web) service to send requests to the web app:
Representational state transfer (REST) is a way to create, read,
update or delete information on a server using simple HTTP calls
Although I've never done this myself, I would use the ruby app on your PI to send HTTP requests to your Rails app. This will certainly add a level of complexity, but will ensure you an interface the two types of data-transfer
The difference you have is Rails / any other web app will only act on request. "Native" applications will run as long as the operating system is operating; meaning you can "listen" for updates from the hardware etc.
What I would do is split the functionality:
Hardware input > send to service
Service > sends to Rails
Rails > sends response to service
Service > processes response
This may seem inefficient, but I think it's the best way to capture local-based input from your hardware. You'll have to use a localhost rails app, running with something like nginx or some other efficient server
--
Database
it would only make sense if they shared the data. You should remember that a database is different than a datatable. A database stores many tables, and is generally meant for a single purpose; whilst a datatable stores a single type of data.
From what you've written, I would recommend using two databases running on the same db server. This will give you the ability to create as many tables as you want for these databases - giving you scope to add as many different pieces of data you wish to each. Sharing data can be done using an API or a web service
--
Updating
Rails app will not need to be "updated" - you'll just need to deploy a fresh version. The beauty of Internet-centric software :)
In terms of your Rasberry-PI "on-board" software update - I don't have much experience with this, so can only recommend
I'm planning on writing a control panel for Minecraft in Rails but I don't have much experience with Java at all, Minecraft seems to have some standard remote connection and query tools, but most conventional panels don't seem to use them. For example with McMyAdmin, I have disabled remote connectiona and the query, but it still seems to be able to communicate with the server after restarting it after I've edited the server configs to disable the settings.
What I'm asking is if anyone knows how McMyAdmin communicates with the Minecraft server, it comes with a plugin, but I've deleted that as well and it still seems to be able to communicate with the server, I know McMyAdmin is written in .NET and I believe it uses Mono as it's server, as it's cross platform.
If anybody could shed some light on this I'd be ever so greatful, just trying to get my head around the communication.
McMyAdmin uses the plugin to open a socket that it can interact with(Not sure which features are provided using this plugin). The rest of the features are just from the Process instance that it creates. It also just edits the config files for a few things as well or runs commands using the input stream of the process.
The situation is simple. I've created a complex Delphi application which uses several different techniques. The main application is a WIN32 module but a few parts are developed as .NET assemblies. It also communicates with a web service or retrieves data from a specific website. It keeps most of it's user-data inside an MS Access database with some additional settings inside the Registry. In-memory, all data is converted inside an XML document, which is occasionally saved to disk as backup in case the system crashes. (Thus allowing the user to recover his data.) There's also some data in XML files for read-only purposes. The application also executes other applications and wants for those to finish. All in al, it's a pretty complex application.
We don't support Citrix with this application, although a few users do use this application on a Citrix server. (Basically, it allows those users to be more mobile.) But even though we keep telling them that we don't support Citrix, those customers are trying to push us to help them with some occasional problems that they tend to have.
The main problem seems to be an occasional random exception that seems to pop up on Citrix systems. Never at the same location and often it looks related to some memory problems. We've p[lenty of error reports already and there are just too many different errors. So I know solving all those will be complex.
So I would like to go a bit more generic and just want to know about the possible issues a Delphi (2007) can have when it's run on a Citrix system. Especially when this application is not designed to be Citrix-aware in any way. We don't want to support Citrix officially but it would be nice if we can help those customers. Not that they're going to pay us more, but still...
So does anyone know some common issues a Delphi application can have on a Citrix system?
Does anyone know about common issues with Citrix in general?
Is there some Silver Bullet or Golden Hammer solution somewhere for Citrix problems?
Btw. My knowledge about Citrix is limited to this Wikipedia entry and this website... And a bit I've Googled...
There were some issues in the past with Published Delphi Applications on Citrix having no icon in the taskbar. I think this was resolved by the MainFormOnTaskbar (available in D2007 and higher). Apart from that there's not much difference between Terminal Server and Citrix (from the Application's perspective), the most important things you need to account for are:
Users are NEVER administrator on a Terminal or Citrix Server, so they no rights in the Local Machine part of the registry, the C drive, Program Folder and so on.
It must be possible for multiple users on the same system to start your application concurrently.
Certain folders such as the Windows folder are redirected to prevent possible application issues, this is also means that API's like GetWindowsFolder do not return the real windows folder but the redirected one. Note that this behaviour can be disabled by setting a particular flag in the PE header (see delphi-and-terminal-server-aware).
Sometimes multiple servers are used in a farm which means your application can run on any of these servers, the user is redirected to the least busy server at login (load balancing). Thefore do not use any local database to store things.
If you use an external database or middleware or application server note that multiple users will connect with the same computername and ip address (certain Citrix versions can use Virtual IP addresses to address this).
Many of our customers use our Delphi applications on Citrix. Generally speaking, it works fine. We had printing problems with older versions of Delphi, but this was fixed in a more recent version of Delphi (certainly more recent than Delphi 2007). However, because you are now running under terminal services, there are certain things which will not work, with or without Citrix. For example, you cannot make a local connection to older versions of InterBase, which use a named pipe without the GLOBAL modifier. Using DoubleBuffered would also be a really bad idea. And so on. My suggestion is to look for advice concerning Win32 apps and Terminal Services, rather than looking for advice on Delphi and Citrix in particular. The one issue which is particular to Citrix that I'm aware of is that you can't count on having a C drive available. Hopefully you haven't hard-coded any drive letters into your code, but if you have you can get in trouble.
Generally speaking, your application needs to be compatible with MS Terminal Services in order to work with XenApp. My understanding is that .NET applications are Terminal Services-compatible, and so by extension should also work in a Citrix environment. Obviously, as you're suffering some problems, it's not quite that simple, however.
There's a testing and verification kit available from http://community.citrix.com/citrixready that you may find helpful. I would imagine the Test Kit and Virtual Lab tools will be of most use to you. The kit is free to use, but requires sign-up.
Security can be an issue. If sensitive folders are not "sandboxed" (See Remko's discussion about redirection), the user can break out of your app and run things that they shouldn't. You should probe your app to see what happens when they "shell out" of your app. Common attack points are CHM Help, any content that uses IE to display HTML, and File Open/Save dialogs.
ex: If you show .chm help, the user can right-click within a help topic, View Source. That typically opens Notepad. From there, they can navigate the directory structure. If they are not properly contained, they may be able to do some mischief.
ex: If they normally don't have a way to run Internet Explorer, and your app has a clickable URL in the about box or a "visit our web site" in the Help menu, voila! they have access to the web browser. If unrestrained, they can open a command shell by navigating to the windows directory.