i use below code..but it doesn't print whole form.Its only print half form.how to print whole form?
PrintForm1.PrintAction = PrintAction.PrintToPreview
PrintForm1.Print()
i also use below code but its not working
If PrintDialog1.ShowDialog = DialogResult.OK Then
PrintDocument1.Print()
As Suzy mentions, PrintForm will send the entire contents of your form to the printer, if that's what you want. It's a lot like taking a screen shot of your form and sending it to the printer. If you want something more discriminating, you'll need to use some sort of reporting software.
However, if you got PrintAction to work at all, you're not using VB 6.0, so this might not be your answer.
Related
I am working on building a replacement to MIRTH and it looks like we are sending out non-standard HL7 ORU_R01 messages. OBR.5 should be just a single field but looks like we are sending a bunch of other data in this section.
<OBR.5>
<OBR.5.1>XXXX</OBR.5.1>
<OBR.5.2>XXXX</OBR.5.2>
<OBR.5.3>XXXXX</OBR.5.3>
<OBR.5.5>XXXXX</OBR.5.5>
<OBR.5.6>XXXX</OBR.5.6>
<OBR.5.7/>
<OBR.5.8>XXXXXXXXXX</OBR.5.8>
<OBR.5.10>XXXXXXX</OBR.5.10>
<OBR.5.11>X</OBR.5.11>
<OBR.5.12>X</OBR.5.12>
<OBR.5.13>XXXXX</OBR.5.13>
<OBR.5.15>XXXXXXX</OBR.5.15>
</OBR.5>
It seems like I should be able to something like the following.
obr.getObr5_Priority().getExtraComponents().getComponent(2).setData(...)
But I am having issues trying to find the correct way to set the different segments. All the fields are Strings.
Found something that I think has ended up working for us.
ID expirationDate = new ID(obr.getMessage(), 502);
expirationDate.setValue(format2.format(date));
obr.getObr5_Priority().getExtraComponents().getComponent(0).setData(expirationDate);
Where 503 refers to which element you want to set. In this case I am trying to set OBR-5.2. getComponent(0) because it's the first extra component I am adding for this particular segment. I am not sure entirely if my explanation here is correct but it creates a message we need and parses as I'd expect so its my best guess.
Dereived the answer from this old email thread https://sourceforge.net/p/hl7api/mailman/hl7api-devel/thread/0C32A03544668145A925DD2C339F2BED017924D8%40FFX-INF-EX-V1.cgifederal.com/#msg19632481
I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.
I'm using hubot with the hubot-slack adapter.
I have a very long url that I'd like to write to the chatroom, and would like to display it as a link.
From this:
http://magnum-ci.oak.domain.com:8080/job/nick_test_success_build/44/console
To this:
Click here to view the console out
I'm using:
res.send "http://magnum-ci.oak.domain.com:8080/job/nick_test_success_build/44/console|link"
I haven't tried this recently with Hubot, but note that it doesn't work as a user.
Slack's docs make it look like you can use "labels" to display friendly URL names. See the last example on this page https://api.slack.com/docs/unfurling
You may be able to send the text
<http://mylink.com|Show this>
in a message and get the desired results.
I tried this a long time ago and don't remember if it worked.
#mshish is right, <http://mylink.com|Show this> should be the way to go.
You can test the output of your link using the Message Builder.
Unfortunately it looks like this is not currently supported by the hubot.
https://github.com/slackhq/hubot-slack/issues/114
I would like to create a XPages form to print it out. I am not sure which is the best way to do this. I mean I need to create a panel or table or any other design elements then put all my staff in it?
I need advise:)
Regards
Cumhur Ata
Speak after me: browsers don't print.
If you need precision layout a browser is your worst enemy. Each one renders slightly different, so don't bother.
Your best bet is to create a PDF file for printing. There you have pixel-perfect rendering as you deem fit.
You can use iText, PDFBox or XSL:FO to generate PDF. There are code samples on OpenNTF or you read my blog entries about it.
I dont know what exactly i have to type in title for this ,i tried my best
anyway coming to topic
I am making one acc checker for that purpose ,i am sending user and pass from my bsskinedit1 and bsskinedit2
here is my code
s:='http:\\site.com..premlogin='+bsskinedit.text+'&password='+bsskinedit2.text
but it giving some error ,then i used showmessage whats wrong with it then i came with strange result
see below
observer after 4 & and p combining together and appearing as a some new symbol :(
can any one tell me why its coming like this ?
Your code (where you build the URL) is most likely correct (I guess the above has some typos?!), but when you display the URL in a label for instance, the & character is treated as indicator for an accelerator key.
By Windows design, accelerator keys
enable the user to access a menu
command from the keyboard by pressing
Alt along the appropriate letter,
indicated in your code by the
preceding ampersand (&). The character
after the and sign (&) appears
underlined in the menu.
If you want to display the & character itself, you have to set your string variable to &&.
By placing two ampesands together - you state that the character following the first one is not used as the accelerator - rather you actually want to get it (only one) displayed.
Just use your debugger if you want to see the real value that your string variables have, don't output them to a message box or the like... It may have side effects, as you can see.
Regarding the URL you build: I can't possibly know how it has to be correctly, but at least you should use the right slashes!
s := 'http://site.com...'
(All quotes from delphi.about.com)
In addition to what Mef said, you can use OutputDebugString to add your string to the event log in its raw form, so you don't need to modify it before displaying it. Delphi should capture those strings automatically if you're running from the debugger. If you aren't running it from Delphi you can use DebugView instead, which captures the messages from any running applications.