I have multiple labels in the storyboard using the any X any Resolution as follows:
Now I have added constraints to the best of my knowledge to force the labels to reposition when an iphone simulator is used and the following happens.
What I would like to happen is have the labels remain the same distance apart from each other proportionally and just resize their font size. So If we were to divide the Iphone screen into thirds Days would occupy the first 3rd, months the 2nd, and Years the 3rd. I thought maybe using aspect ratio for constraints would work but I got the same effect of the labels bunching on top of each other. It looks like they maintain the constraint of distance from the edges but they wont resize themselves to keep the ratio.
Thanks
If you want to keep same distance between each of them, one way of achieving it is:
Give all of them equal widths constraint. and set leading and trailing constraint to zero. Align all labels to centre horizontally.
This way, you wont need to change the font size..
But, however, if you still want to change font, go to attributed inspector for label and under auto shrink: change fixed font size to minimum font size and set it to appropriate value, say 14.
Related
I am a beginner, I am trying to do an autolayout. I am trying to make the label 'HRIS' and 'Please login to continue' to be proportional to the screensize (its superview), I can do it for the login button and the image leaf as the picture above, we can see that the login button and leaf image are proportional.
for the image leaf, I do equal width with 0,1 multiplier to the superview, and then I also add 'aspect ratio' to make it proportional.
but when I apply the same way to the label, it doesn't work, as we can see the label size still the same for iphone 4s and iphone 8, maybe it is because the instrinsict content size (the font size itself) that makes it like that. I tried to apply this way, but it seems the size is still the same
I want to make it little bit smaller for iphone 4s, I also can't modify using size classes since it is in the same class
so what I have to do to make label proportional to the superview (screen size / background) ?
You can do it by setting both proportional width of the label and allow it to scale down the point size.
Set the label width to proportional width like this. It is just a regular same width constraint that you edit.
Then allow your label to scale down the point size like this. This is a property of your label.
Set different font size using variations...
Simply set up a constraint for your label's width to be equal the view's width with your desired multiplier. In my example I used a multiplier of 0.5:
I'm developing an app where I'm facing an issue to achieve one UI layout only for iPhone devices. This is the layout that I'd like to achieve:
I want to achieve overlapped views that layout should be same on every device from 5s to 7 plus.
The key is setting proportional constraints.
Start with adding a UIView to hold the 4 elements - background, man, woman and heart.
Add a UIImage for the background, and pin the edges to the edges of the view - that's the easy part.
Add a UIImage for the Man...
Set the Aspect Ratio to 1:1 to keep it square (well, round in this case).
Set the Height constraint equal to the Height of the "containing" view, but then set the multiplier to less than 1 to make it relative to the view. In this case, 0.6 is pretty close.
Set constraints for Centered Horizontally and Vertically... then set the Multipliers to keep the image left and above the centers. 0.64 on horizontal, and 0.9 on vertical work pretty good.
Add a UIImage for the Woman...
Set the Height and Width constraints equal to the Man image.
Set constraints for Centered Horizontally and Vertically... then set the Multipliers to keep the image right and below the centers. 1.4 on horizontal, and 1.2 on vertical work pretty good.
Add a UIImage for the Heart...
Set the Aspect Ratio to 1:1 (or whatever gives you the proper ratio for your heart image).
Set the Height constraint equal to the Height of the "containing" view, but then set the multiplier to less than 1 to make it relative to the view. In this case, 0.15 is pretty close.
Set constraints for Centered Horizontally and Vertically... then it will need a little adjustment o note Vertical 1.05 worked for me.
Now, you just need to set appropriate constraints for the "containing" view, and all the elements will scale and position themselves within it.
When you're all done, it should (hopefully) look like this:
I put the project up in a GitHub repo for you to look at: https://github.com/DonMag/AnotherLayoutExample
I am trying to create this layout, but I am struggeling so badly that I have no words left for it. I have tried for three days but yet I can't create the layout.
I am trying to have the three imageviews in the middle scale if the height of the view changes, but they are not behaving correct. I have successfully manage to get the ratios correct though, but the images either goes behind the blue button, or the blue button suddenly looses its height or the text disappears.
Isn't it possible to have three image views in the middle that take whatever height is left after the title and text + blue button have been laid out and then properly show them with correct ratios?
You can try multiple approaches here:
Size Classes:
Lay out the views for each possible size (probably the easiest but the least flexible
Use Constraints with different priorities:
You can set a max-height for the image views by adding a constraint for the height and then setting its relationship to equal or less than. This allows the image to scale up until a maximum size is reached.
Then add a second constraint between the bottom box and the images. Set the priority of this constraint to 750. This makes the image grow in height, when the bottom view moves down.
Then add another constraint which sets the aspect ratio of the image. If you use the mode of the view to Aspect Fit, the image will now always be scaled up to fit the image view.
To make all images scale proportionally, add constraints for equal width and equal height between them, then set the factor to match the proportions between these images.
The last step is now to vertically align the images properly as you showed in the pictures. To do that, add constraints between the images, which align them by their vertical centers, bottoms, baselines or tops.
In my app for iOS 8, I have a UISegmentedControl that stretches to fit the width of the device's screen. So on an iPad it's more pixels wide than it is on an iPhone 6+, which is more pixels wide than the iPhone 6, etc.
Centered just beneath each segment of the UISegmentedControl, I have a UILabel. So there are 5 segments and 5 UILabels. Each UILabel has a fixed width (fixed by constraint). However if the display size increases they become uncentered.
How in Interface Builder can I specify a constraint that will force each UILabel to become centered beneath each segment? I would be happy if I could just get the elements to remain proportionally spaced with each other as the display size scales, but I can't figure out how to do that, either.
All I can seemingly do is to center the middle UILabel directly under the middle segment by specifying a Center X Alignment between that and the UISegmentedControl.
I specified a Horizontal Space constraint between all the UILabels, and between the outer UILabels and the edges of the view, and set all these to "greater than or equals". They all have the same priority, but strangely, they don't all scale proportionally to each other.
The resulting problem is that the amount of Horizontal Space between each of the UILabels does not scale smoothly as the width of the device's screen increases. If I align everything to be in the proper positions on the iPhone 5S width of screen, then on the iPad their alignment is all wonky, and only the middle one lines up with its segment. The rest of them are all off center.
It appears that there is no way to specify a percentage of the over-all display width as a constraint -- you can only specify things in terms of pixels. Really?!?!
Clearly I could make the width of the objects to be flexible, but because they are text labels with right-aligned text, that screws everything up.
Surely I'm missing something here... since the point of Auto Layout is to make your interface scale according to the screen size, surely there is a way to specify a constraint as a percentage of any given view or subview... surely!!! But how? I've read the documentation and I cannot, for the life of me, figure it out.
BTW I did see that in the past, people have used crude hacks like spacer views or multiple sets of constraints, but surely those are outdated answers, and I'm just overlooking something extraordinarily obvious... right?
You can do this by making the centerX constraint of your labels equal to the superview.trailing times 0.1, 0.3, 0.5, 0.7, and 0.9 with constants of 0. To make these constraints, add your 5 labels to the view. Give the left most one a vertical spacing constraint to the segmented control. Select all 5 labels and give give them a "vertical centers" alignment constraint. Now control-drag from each label to the right side of the screen, and select the "Trailing space to container margin" constraint. Edit each one of these trailing constraints to look like this (except for the multiplier that needs to be given the values I mentioned above):
You'll have to reverse the first and second item (which you do from the pull down on the first item), change the Label.trailing to Label.Center X, and uncheck the "relative to margin" box, then correct the constant and multiplier values.
This approach will only work if the segmented control stretches all the way across the screen with no padding to the edges. If you want padding to the edges, then you need to use a completely different approach. You would need to create 5 UIViews below your segmented control -- align the left edge of the left-most one to the left edge of the segmented control. Align the right edge of the right-most one to the right edge of the segmented control. Give the 5 views equal width, and 0 length horizontal spacing constraint from each to its neighbor. This will give you 5 views that mimic the segmented control in width, with each view being the same width as one of the segments (assuming all the segments are the same width -- if that's not the case, you're screwed). Then you only need to add your labels as subviews of these 5 views, and give them centerX and centerY constraints.
Check out the loading date label. It could be '2 May' or '24 December'.
I want to display the label 'days remaining' after it. Since the width of 'loading date' is dynamic, via auto layout I haven't been able to place 'days remaining' after it. It stays at a fixed distance.
How to adjust it in xcode, using autolayout?
I've been able to achieve it via code by disabling autolayout. However with iOS 7 coming up and autolayout would be essential to maintain iOS 6 and 7 at the same time, I thought it would be a good time to do it with autolayout.
Make sure that the spacing between your two labels is set to auto and that your days remaining label is left aligned. I suggest keeping a constraint between the trailing edge of your days remaining and the superview, but lowering the priority a bit. The goal there is to ignore it when the label should be far away from the superview, but not clip or go outside of the visible area when the date is very long.
You may also need to increase the content hugging priority of the date label and/or decrease the compression resistance of your days remaining label.
You may get better insight into what your labels are doing by setting the background color on them temporarily. The goal is to see how large your labels are, where the text is in the label, and where the spaces are. If there are large gaps between the labels that will help you figure out where to add constraints or adjust the priorities. If the labels are taking up the full width then it will help you get the alignment set correct.