I have been trying to install jbpm6.1.0 in my Windows 7 32 bit system. However I am unable to complete so because doing an ant demo.start.noeclipse leads to a
build.xml:508: JBoss application server did not start within 5 minutes
I have increased the time in build.xml and tried other simple tweaks. Then I was suggested to look into log files but I observed they were never created, the log folder within standalone is not present at all. I think that my installation is not getting complete and JBoss application server not starting because of that.
I used this tutorial for installation and also used links given by it
http://docs.jboss.org/jbpm/v6.0.Beta2/userguide/ch.installer.html#d0e281
I am not able to debug and get to a reason. Starting the standalone.bat only gives me info that the Java_Home environment variable is set properly. I can do with a way out or even a direction as where to get more information on the process so that I may be able to debug.
Java_Home is C:\Program Files\Java\jdk1.7.0_51\bin and ANT_HOME is C:\Program Files\apache-ant-1.9.4 with path using the C:\Program Files\apache-ant-1.9.4\bin for its purpose. Hence both the applications must be running correctly
You need to find out what the error is because it seems that the application server is not even starting, that can be because you don't have administrator rights or because there is another server running using the required ports
Related
I try to run Neo4J Community Edition 4.1.6 and need a hint. I have downloaded the winzip-package and unzipped it on a Windows 10 PC. I created a folder for the Neo4j files and another for the current JDK 15 package. The path for JDK has been put into system path variables. The log-flags in the neo4j conf has been set to DEBUG for HTPP. JAVA version throws the correct "15.0.2". No JAVA error message while starting.
I can start the service and the status gives back "Neo4j Service started...". After roughly 10 seconds the status shows that Neo4j has stopped without any further notice.
I can't see any logs in the \logs folder - the folder is empty.
I do not see a graphdb been created under neo4j-community-4.1.6\data\databases - the folder is empty
I cannot access the DB by localhost:7474
I do not see any error messages in the cmd windows.
I restarted the system several times but I still have the same outcome. Any hints?
Thank you
I believe we only support JDK 11 when using Neo4j 4.x.
https://neo4j.com/docs/operations-manual/current/installation/requirements/#deployment-requirements-java
Your errors may be because you are using JDK 15.
When diagnosing issues, it also helps to check the neo4j.log and debug.log files in the logs directory.
I am confused by Oracle documentation on how to setup the (ATG) Web Commerce available on the edelivery website.
I would like to get to the step where I have properly set up the admin console.
Running the bin files on a server seems not work for various reasons:
either installation finishes but nothing is working
OR
the installation endlessly asks for arbitrary input.
Also, I want to know if it is possible to setup the server in docker and/or an Amazon Linux EC2 instance.
There are quite a number of steps involved in getting the ATG Admin Server up and running. These start with installing a JDK, Application Server and provisioning a database. Once you have gone through the Installer (which you downloaded from the edelivery site) you need to go through a basic setup process using the CIM tool. The installation process (for ATG 11.3.1) is documented here, while the steps to setup a basic application is documented here.
Working through the steps in the CIM tool, you will end up with a deployable .ear file that you can copy to your application server. Once your application server is started, you will be able to access the Dynamo Admin server.
As of version 11.3.1 ATG is officially supported on Docker. Considering that you compile your own .ear file and it can be deployed to an Application Server (such as Weblogic), Docker support won't necessarily provide you with an ATG Image. It will simply allow you to run your compiled artefact on a Docker container. You are more likely wanting to get hold of a Weblogic Docker Image and deploy your ATG artefact there.
I've been digging for hours and i haven't been able to find what i would think is a pretty common scenario.
I am attempting to deploy a Web Deploy Package to my existing Web Site\Web App via a TFS Release. The location of my existing Web Apps is mapped to a different drive. My source code on my web server is not in C:\inetpub lets say its in D:\MyFiles.
I'm open to using any TFS task to do this. It seems like my two options are:
Run Batch Script - point to myApp.deploy.cmd
WinRm IIS Web App Deployment
I've seen lots of examples of overriding the computer name via the setParamater file but I have not seen one example of how to set the target path for the package?
Again, i want to deploy a web package via a TFS release to D:\MyFiles. I've created the package and it deploys locally to c:inetpub, I would assume if I can get it to deploy to a specified Target location locally then when I run that same. CMD file from TFS release it will use that location on the deploy to server.
UPDATE:
So... this just started working. I'm not sure what the issue was but the WinRm Task didn't do the deploy on Friday but did the deploy on Monday. I'm thinking it may have been related to a FQDN for the server path? Honestly I'm not sure what fixed it or what to do with this post? The answer below by #Andy may help someone so I won't delete it. That link is a good one and it showed me how to perform IIS configuration with Web Deploy.
Thanks in advance,
Greg
Seems you are trying to change the physical path of an IIS site/app using MSDeploy.
Just try adding an additional command (appcmd) to the MSDeploy package manifest to change the physical path of the IIS site during the deployment:
<runcommand path="%windir%\system32\inetsrv\appcmd set app /app.name:"Default Web Site/app12" /[path='/'].physicalPath:C:\temp\app12" waitInterval="5000"/>
Refer to this article for details:
WebDeploy/MSDeploy Quick TIP: Change IIS Site/APP Physical Path with MSDeploy
This is my first foyer into .Net Core and App Engines, so please forgive me if I sound uninformed.
We have a .Net Core Application that we're trying to get published to a GCP App engine (obviously). when I run dotnet publish -c Release it builds just fine without any errors. When I test the program locally it runs just fine and I'm able to access it. However whenever I try to get it on GCP I get the following error:
Updating service [default] (this may take several minutes)...
.................................................................................................................................................failed.
ERROR: (gcloud.app.deploy) Error Response: [9]
Application startup error:
Error:
An assembly specified in the application dependencies manifest (ApplicationName.deps.json) was not found:
package: 'Microsoft.AspNetCore.Mvc.Abstractions', version: '2.0.2'
path: 'lib/netstandard2.0/Microsoft.AspNetCore.Mvc.Abstractions.dll'
This assembly was expected to be in the local runtime store as the application was published using the following target manifest files:
aspnetcore-store-2.0.5.xml
Failed to deploy project WebApiDotNetCore to App Engine Flex.
We tried removing it from the dependencies JSON, and that just ended up breaking everything, so it is indeed required. It is installed in the project via nuget, so it should be included with dotnet restore. I've looked around and some sources seem to think that it's the installation of the dotnet core sdk, but I've tried it on three computers and always get the same thing.
Lastly, I should say this happens when I try to deploy through command line as well as directly through Visual Studio with the GCP SDK.
Has anyone experienced this error, or something similar? Any advice or guidance is very much appreciated.
Thanks!
-BT
OP REVISION
As an update I was able to get this resolved aside from the fact that I get a 502 error when I try to load the application. Here are the steps I took for anyone else that is looking what to do:
Pre-reqs: Docker for Windows and Google Cloud SDK installed and running. Running turned out to be a pain with Docker for Windows. Many many restarts and reinstallations.
Open the solution and ensure that the startup project is set correctly.
Right click the startup Project, and select Add > Docker Support.
Select Linux in the popup window and allow the files to be created.
When complete, the Dockerfile should appear in the preview window. Do the following:
For me the first line read: FROM microsoft/aspnetcore:2.0 AS base. Change this to FROM microsoft/aspnetcore-build:2.0 AS base.
Additionally, check to make sure that the last line has the correct .dll name. Docker for Windows will put whatever the project name is rather than the class name, so for me my final .dll names were different than the project name.
Lastly, if your project has any dependencies that are required to run but not to build, then you'll need to manually add them. For me we have a couple of XML files that needed to be put in the app folder, so I had to add COPY *.xml /app/ and put those files in the same folder as the solution file is in.
If there's anything else you need to do to the Dockerfile I highly recommend this page. It's a how-to on all Dockerfile commands written in ENGLISH! (that was my biggest problem with all of this - I have little experience with Linux and even less with Docker and everything was written in Greek for me).
Create an app.yaml file. I just used the standard:
runtime: custom
env: flex
Copy the Dockerfile found in the startup project's folder into the folder with the solution.
Initialize gcloud to the right project, then navigate to the solution folder. The type gcloud app deploy app.yaml, and follow the onscreen guide.
for me it takes about 15 minutes to deploy the GCP, so depending on the complexity of your project it may take longer, though this one is rather complex.
Now I'm trying to figure out my 502 error... I've tried what seems like everything - changing the listening port in the application, exposing the listening port on the dockerfile, trying to get GCP to open that port, and trying half a dozen different ports. It's slow-going since it's such a chore to deploy each time.
Hope this helps anyone that was like me a couple weeks ago and had never even heard of Docker!
Which version of .NET Core is this? Also, have you tried to run in Cloud Shell? Maybe that will provide more clues on what might be wrong.
It looks that you don't have the Microsoft.AspNetCore.Mvc.Abstractions library installed in your system. Using the .NET CLI, type the following command:
dotnet add package Microsoft.AspNetCore.Mvc.Abstractions --version 2.0.2
After that, to ensure the library is included, run the following:
dotnet restore
dotnet build
Try running it locally (it should work), and then use the dotnet publish -c Release command again.
I have seen this question about deploying to WebSphere using the WAS ant tasks.
Is there a simpler way to do this? In the past I have deployed to Tomcat by dropping a war file into a directory. I was hoping there would be a similar mechanism for WebSphere that doesn't involve calling the IBM libraries or rely on RAD to be installed on your workstation.
Just a hint: if you activate "Log command assistance commands" in System Administration / Console preferences, you will get a logfile in the server log directory that contains the jython scripts for all actions you did on the console. So you can just deploy your stuff per console the first time, and then grab the commands for later and feed them into wsadmin.bat -lang jython "thecommandscomehere" for the next deployment.
There is the concept of WebSphere Rapid Deployment. It's supposed to be the same experience as what you describe for Tomcat.
One way to do it could be using Jython or jacl scripts. See those samples at IBM site.
[EDIT] Especially the wsadminlib.py.zip download near the bottom of the page contains a huge set of examples and helper functions to get you started.
WAS does provide a client jar containing some custom ant tasks. However they seem to be extremely bugy and dont work with remote servers.
IBM ANT TASK Javadoc
Netbeans also has support for was 6 and 6.1 but this again is still quite buggy, however it can be useful for generating some the bindings files etc.