Trying to run passenger-install-apache2-module which exits with error message:
Unable to autodetect the currently active RVM gem set name. This could happen if you ran this program using 'sudo' instead of 'rvmsudo'. When using RVM, you're always supposed to use 'rvmsudo' instead of 'sudo!'.
Please try rerunning this program using 'rvmsudo'. If that doesn't help, please contact this program's author for support.
I am not running it via sudo command. RVM is installed globally in /usr/local/rvm/bin/rvm. I'm on RHEL 6.
Have you tried to run the mentioned rvmsudo.
I would check first of all whether your RVM installation is valid and functional.
Activating Ruby environment with rvm did the trick.
After wrestling with this for quite some time I switched from rvm to rbenv and this completely cleared up. My theory is that my system ruby#2.4.1 was somehow being invoked by passenger instead of the ruby I wanted to use #2.4.4 and rbenv just doesn't have this issue.
Related
Running OSX Mavericks, ruby 2.1.1p76 (2014-02-24 revision 45161) [x86_64-darwin13.0], rvm 1.25.23 (master), and rails-4.1.0 (allegedly)
I'm working through the railsapps.org book on learning rails and made it about 1/2 way through yesterday. When I stopped for the day, I closed out iTerm2 and shut off the Macbook Pro. Today, I powered up, opened iTerm, navigated to my working directory (~/rubyonrails/learn-ruby) and entered rails -v.
I see this:
`Rails is not currently installed on this system. To get the latest version, simply type:
$ sudo gem install rails
You can then rerun your "rails" command.`
So I run sudo gem install rails and it shows that it has installed rails-4.1.0. Now rails -v still gives me the same error message above.
I tried also running rvm use ruby-2.1.1#learn-rails first and I still get the error message.
So I'm a little stuck and I can't figure out what to do to get rails working. Also, how do I go about setting up the bash environment such that I don't have to go through this each time? It would be nice to nav to my working directory and just start work without having to do a bunch of re-installation and reconfiguration each time.
Regards,
Jeff
please type in your shell:
$ bash --login
and then repeat your commands.
rails -v
Also try to call it with the full path:
like:
/your/path/to/rails -v
I think that the shell just doesn't know where rvm/rails etc is located.
You can solve this by entering:
$ source ~/.rvm/scripts/rvm
When you switch to the ruby-2.1.1#learn-rails ruby/gemset combo, and do gem list, what do you see?
The way people usually use rvm is to have every project folder specify the ruby & gemset it uses (they don't all have to be different). This is done with files called .ruby-version and .ruby-gemset. These should contain, in your case, ruby-2.1.1 and learn-rails respectively.
Set these if you haven't already, then leave the folder and enter it again. Then do bundle install to install the gems for the project into the rvm/gemset combo.
Your problem is that you ran
sudo gem install rails
The error message telling you to do this comes from your system Ruby, which doesn't know that you want to use RVM.
RVM installs gems into your user-space directory. By using sudo, you're bypassing this and installing it into (effectively) the superuser space, i.e. globally.
If you instead just run
gem install rails
then you'll be using RVM's copy of the gem utility rather than the globally installed version.
I am trying to get set up using rbenv and ruby on rails. Everything has been working fine (been working through Lynda.com Ruby on Rails Essential Training) until it came time to actually install the rails gem. It fails in the sam way every time. Can someone tell me what I need to do to continue with Rails?
I've used rbenv and have been set up with Ruby 2.1.1.
Provided Terminal Screenshot
Edit: I am calling sudo because when I try to install without sudo it provides the following (folder permissions provided for context)
Assuming you have a working rbenv installation with 2.1.1 installed, you should just be able to remove sudo from the command:
gem install rails --no-rdoc --no-ri
Using sudo runs as root, which knows nothing of the local rbenv installation for your mattcoker user, so it uses the system's Ruby instead. Generally, when using rbenv locally on your machine, you should never need to use sudo.
I never actually set the local ruby version with rbenv local 2.1.1. Everything worked like a charm after that.
This is a beginner-level question.
I'm using Ubuntu 12.04
I copied a project (created on Rails 4 using the rails new command) from Dropbox to my local environment, where I have previously install Rails 4 and up-to-date Ruby and RVM, went to project's directory, typed rails server and got
The program 'rails' is currently not installed. You can install it by typing:
sudo apt-get install rails
I ran gem install rails instead.
Will I have to run gem install rails on every project's directory? I thought the Rails install was a general and accessible on my whole environment.
The project was created using the same Ruby version, but on a MacOS X system.
The project is a static web brochure and has no database configuration.
Thank you in advance.
Make sure you're using the correct version of Ruby - the same version that you'd installed Rails into - with rvm list.
You likely have two of them (since you have such an issue) - the system Ruby and the RVM-installed Ruby. And likely RVM didn't engage and hook up the correct path to the rails executable, thus the error.
This should fix the issue:
rvm use whatever-ruby-you-had-installed-rails-into
Where whatever-ruby-you-had-installed-rails-into is a string like ruby-2.1.0-p0 taken from the rvm list output.
To make RVM retain Ruby version for the project.
echo whatever-ruby-you-had-installed-into >.ruby-version
in your project's path.
So after a few hours of testing, reproducing the problem, and reading (the other answers inclusive) I got the solution as follows:
Short answer: No. Rails needs to be installed only once.
Long answer: This problem occurred because of a default setting on Terminal that prevents the system from using RVM installations of ruby and rails. The solution is to integrate RVM with gnome-terminal as described in the RVM website.
With terminal window active, go to the menu at the top bar
Edit > Profile Preferences > Title and Command tab
Check the Run command as a login shell box
Restart Terminal and make sure your gemset and ruby version are set
rails server should now work as expected (you might be prompted to run bundle install before Rails can actually run fine, follow the promtp).
I am still learning to work with Ruby on Rails, so any inputs, clarifications, or additional information on the issue is more than welcome.
You don't have to install Rails on every project, but the gems that you need for that project.
With bundle install you install all the gems that you specify in Gemfile.
If you want to avoid reinstall the gems every time you change project, I suggest you to have a better look to RVM: it has got an opt called gemset (https://rvm.io/gemsets), if you use it you just need to switch your gemset:
rvm gemset use yourgemset
I hope it can help you.
I installed ruby as per instructions given here but when I do ruby--version then it still shows 1.8.7. How do I make sure I use newly installed Ruby?
I would suggest you to use RVM (Ruby Version Manager). You may find a full installation guide here:
http://ryanbigg.com/2011/06/mac-os-x-ruby-rvm-rails-and-you/
If you get an error such as "ERROR: Error running ' ./configure...." after executing rvm install e.g.
rvm install 1.9.3
Then you may try to install it like this:
rvm install 1.9.3 --with-gcc=clang
Note: in the guide this possible error is not described
Did you properly setup your PATH? What's the output of echo $PATH? /usr/local/bin has to come first they way this tutorial sets up things. You see that everything worked right when which ruby displays /usr/local/bin/ruby.
Personally I'd recommend using a tool for managing Ruby versions though. RVM still seems to be the most popular choice, I prefer the combination of rbenv and ruby-build.
I'm going to start with the usual noob line, "I'm new to rails". Oh, and I'm running Mac OSX 10.6.4
I've been following a bunch of guides to get set up, specifically these two here and here. The guides are great, the reason I'm using the second one is because of RVM and the reason I'm using the first is for MYSQL.
Anyway, when I started, I wasn't following the directions completely and so after I installed RVM, for some reason I installed rails with sudo gem install rails -v 2.3.8 because thats the version I need. So... I realized I was using the system ruby, and wasn't taking advantage of RVM. What I did now was install Ruby 1.9.2 so I can install rails 3 and test it out, and I also installed 1.8.7 and rails 2.3.8 so I can use it for what I need it.
Now, I'm trying to uninstall the gems from the system Ruby, but whenever I try to I'm getting this error:
ERROR: While executing gem ...
(Gem::InstallError)
cannot uninstall, check 'gem list -d
whatever gem I try to uninstall'
Any ideas on how to remove rails and all these gems? I just want to start from scratch with RVM.
UPDATE:
By running the command gem list -d rails I've located the gems in /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/18. Should I delete them manually?
SOLUTION!! I still don't understand why this happened, I'd love if someone could explain. Why was the path non-existant? What caused this error?
Also, I want to mention that the solution I linked to has a comment saying that the question is a duplicate. However, the original has a different solution and did not help me (though its the basis to finding this answer). Simply deleting the gems manually in finder would not remove them from the gem list.
Without further ado - it turns out that when trying to uninstall the gem, it can't locate its path (I think the problem is because of installing with sudo, but I might be wrong). What you need to do is (you have to do this one by one for each gem, or at least I had to):
gem list -d 'name of gem' and note the "Installed at:" location (in my case, /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8)
sudo gem uninstall 'name of gem' -i 'the path noted above' (ex. in my case, sudo gem uninstall rails -i /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8
Some gems still might not uninstall returning a permissions error. If this is the case, what you need to do is create a folder /bin, in the path above. (in my case, mkdir /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/bin
Continue uninstalling as in step 2, still using the original path (/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8).
Now all uninstalls should work!
Two things you should note when using rvm:
You should NEVER use sudo to install gems, just do a gem install xxx
You can not uninstall gems installed in the global gemset from within another gemset. You should switch to the global gemset and uninstall from there:
rvm gemset use global
gem uninstall xxx
execute this either in irb or in a script proper:
`gem list --no-versions`.split("\n").each do |gem|
`gem list -d #{gem}`.gsub(/Installed at(.*):.*/).each do |dir|
dir = dir.gsub(/Installed at(.*): /,'').gsub("\n", '')
system "gem uninstall #{gem} -aIx -i #{dir}"
end
end
try this way :
sudo apt purge rails
ok i see....
at this point, if you're in the terminal, it shouldn't take but a few minutes to reinstall the whole shebang
I suspect you might not be in the correct rvm name that has the gems you're trying to install so thats why i'd suggest reinstalling rubygems and building you're core gems from the beginning in your Global rvm gemset name.
A more generic answer to delete all gems for older versions of gem 1.8.
gem list --no-versions | xargs sudo gem uninstall -aIx
I was using RVM to manage my gemsets and had not selected the gemset. I wasn't that I had selected the wrong gemset, it was that I hadn't selected the gemset at all. A lovely way to spend the bulk of an hour of my first morning back after my summer holidays!