I'm started to work at new place as iOS programmer. I joined existing project and got an assignment that i don't really know how to approach.
So my problem is this: when you press a button, next window has to have a tab bar with four icons, this means four different navigation stacks. Its not that hard to make, but in main screen i have more then four icons, and if i press any one of them next window always has to have a tab bar with four static icons, like shortcuts or something.
So what should I do? Does anyone had the same situation? I want to start with a good advice to save trouble later on.
You should probably rethink the app design. Tapping an item on the tab bar shouldn't result in a different number of tab bar items, as it leads to an unstable and unpredictable UI.
While not the most efficient in terms of visible content, you could introduce a segmented control (or a similar custom view) on top right under the navigation bar (if there is one), as seen in the Facebook app (though here it is used to perform actions, not changing views).
Your root view controller should be embedded in a navigation controller. Then push a view controller which contains any number of tab bar items not TabBarController. Then you can present each view controller either push or custom.
Related
I'm quite new to Swift and am working on an app where I'm not sure how to setup the navigation. It works with a tab bar, except that I want the bar to display nomatter what view is being displayed. There are 4 "main" views that the user should always be able to get to. The problem comes when I get into subviews of one of those main views.
I have the tab bar with the 4 icons for the primary views. It's currently displaying the "activity list". When the user clicks on an activity, it will display a list at the next level of detail. However, that view is not one of the primary ones that is represented in the tab bar, so it has no tab bar and no way to transition directly to one of the primary views. You have to back your way out to the Activity list before you can select a different tab.
Say that the main views (represented in the tab bar) are A, B, C, and D. I want to be able to display the same toolbar on all sub-views (e.g. C-1, C-2, etc.) and allow direct transition to any of the other main views, without the user having to manually back out of each sub-view.
What is the "best" way to accomplish this?
1) Should I be creating a custom toolbar object that gets implemented on every view controller?
2) Should it be a combination of tab bar and tool bars?
3) If I have drilled into a stack of views, do I need to pop all of those views individually before I can switch to a different tab?
4) What do I use as my "root" view?
Thanks for any suggestions. I have hunted, but haven't found an example of a scenario quite like this.
I think I figured it out. I needed to embed each "tab" view in a navigation controller.
So...
Tab Bar Controller --> Navigation Controller --> View Controller --> "view stack"
The tab bar now remains at the bottom for every view, and if I touch the tab icon a second time, it goes back to the original tab view controller.
I'm doing iPhone tabbed application, but I need to use navigation bar also (just for app title and single icon for Settings in the corner) like twitter did: link. I have 4 tabs in my app too. I was wondering is there any chance to create only one navigation bar, so when I want to change it, I will change it only in one place?
I was looking at this tutorial, but there are two "Navigation Bar" objects. And I would like to have single object that will appear in every tab.
Right now I created tabbed app and manually added navigation bar item into first tab. Then I copied it into others. It works ofc, but I'm not sure about that solution:/
Your use of separate navigation controllers for each tab isn't a bad solution.
Setting up the navigation bar and its items in only one place is also a good idea. To achieve this, you could always have your view controllers derive from a custom view controller that overrides navigationItem.
i am making one iOS tabbar application in that i have put 4 different tabs and whenever i click on 1 st tab and load another view after clicking of the first tab. After that when i press back button then tabbar is not displaying .So that i want hint that how can i show that
back the tabbar when we move from one tab from another and yes how i can use consistent the tabbar in whole application can you just guys help me on this i am new to iOS development.
here i am put the screen shot ...
here first screen is this one..
when i tap the video button that are first in the view then another window open
which are as under and see the tabbar is not there...
when in video controller there is tabbar is there but i drag and connect to that then tabbar is disabled
Looking at your screen snapshots, do I correctly assume you're attempting to transition to the "Videos" scene by touching the big "Videos" button in the center of the "Home" scene (rather than touching the tab bar button at the bottom of the screen, which I assume works fine)? If that's the case, you need to have your button tell the view controller's tab bar controller that you want to change the index of the tab bar, and it takes care of it for you. You cannot do the transition using a segue (or at least not without a custom segue, which is even more complicated than the procedure I outline below). If you're changing the view some other way (e.g. using a standard segue or using presentViewController, pushViewController programmatically, etc.), your tab bar can disappear on you.
You later said:
when in video controller there is tabbar is there but i drag and connect to that then tabbar is disabled
Yes, that's true. You cannot use a segue from one of your big buttons to one of the tabs in your tab bar. (Or technically, if you wanted to use a segue, it would be a custom segue which would do something very much like my below code, though perhaps a tad more complicated.) So, rather than using a segue for your big button, you need to write an IBAction (connected to the big Videos button on the Home scene), that tells the tab bar to change its selection:
- (IBAction)clickedVideosButton:(id)sender
{
[self.tabBarController setSelectedIndex:1];
}
A couple of comments:
My answer was predicated on the assumption that your tab bar works as expected when you tap on the buttons of the tab bar, itself. If you tap the buttons at the bottom of the screen, do you transition to your other views correctly and preserve the tab bar? If so, my answer above should solve your issues in getting the big buttons to work. If not, though, then the problem rests elsewhere and you need to show us your code that might account for that (either you're something non-standard in the UITabBarControllerDelegate methods, or your viewDidLoad of the view is doing something nonstandard).
If I understand your user interface design right, you have the tab bar at the bottom as well as the big buttons in the middle, which presumably do the same thing. That is, no offense, a curious user interface design (duplicative buttons, requiring extra tap on a button, etc.). You might want to choose to either use either big buttons (in which you can retire the tab bar, eliminate the IBAction code I've provided above, and just use a nice simple navigation controller and push segues, for example), or just use the tab bar (and lose the home screen, lose the big buttons, etc.).
You also made reference to "press back button", and I don't see any "back" button on any of your screen snapshots. Do I infer that you have a navigation controller and you're doing a pushViewController or push segue somewhere? If you're doing something with back buttons, you might need to clarify your question further.
My iOS 5 app uses storyboarding with a UITabBarController. There are three "tabs" each displaying a view controller which has been linked using a relationship back to the UITabBarController. At the moment each view controller appears when you tap the relevant tab, as expected. However, for a more gracious transition I would like to slide the view controllers on and off screen.
By way of example, if I am currently on Tab 0 and then select Tab 1 the view controller on screen (for Tab 0) should slide off to the left-hand side of the screen, and the new view controller (for Tab 1) should slide on from the right-hand side of the screen.
I have been able to achieve this behaviour using a custom UIView as the tab bar but would like to know whether this is possible with a custom segue in storyboarding, as that would certainly save a lot of coding (and also would keep things a fair bit neater in the project)?
Thanks in advance for any assistance.
I am trying to do the same thing.
Unfortunately I think the relationship segue does not allow any customization as it just connect tab bar and the tab bar items together, and not a transition.
My guess is we have to do the transition ourselves when the view appeared.
I'm developing an iOS app just now with a Tab Bar navigation.
I have two screens which show the same information but in different formats (say, list and grid).
The two screens are different enough that they require separate controllers.
Users can toggle between the two views from a shared control bar button (toggle) at the top.
Scenario:
User presses the 'Places' button for the first time and it shows the places as a list.
They press 'grid' to see the same places displayed as a grid.
The user presses another tab bar button to navigate to a different screen.
When they press the "Places" button again, the app remembers their last viewed screen for places was the grid so the grid view is shown.
The user may then toggle back to list view. etc...
Can anybody recommend the best approach to achieving this?
One approach is to use one view controller that manages both views. That way, you don't have to bother with synchronizing data or subverting the normal function of UITabBarController -- there's just one controller. Also, don't try to overload the meaning of the tab for that controller. Instead, add a button to both views that tells the controller to switch to the other view. That'll be easier for your to build, and (more importantly) easier for the user to understand. It's not nice to make familiar controls do unfamiliar tricks.
If your view controllers are such that combining them into one would be complicated, then you can use two controllers and simply swap them in and out of the tab bar by modifying the tab bar controller's viewControllers array. You can still avoid having to sync data between them by having both controllers refer to the same data model.
I was trying to achieve this same thing, and it can actually be done with a basic setup of a TabBarController, NavigationControllers, ViewControllers, push segues, and unwinds.
TabBarController
|==> NavigationController --> PlacesController(grid view) --(push segue from nav bar)--> PlacesController(list view)
|==> NavigationController --> OtherController
|...
Make sure to have an unwind segue back from the list view controller to the grid view controller.
If you toggle between views then go to another tab (e.g. otherController) and come back, you'll return to the last view you were seeing because that's what is at the top of the stack of the NavigationController.