No command 'rvm' found, but there are 21 similar ones rvm: command not found. Comes up when I'm in Vagrant on linux ubuntu 14.04.
Installed Vagrant and VirtualBox.
Found over at rvm command not found
Your problem is that RVM is not loaded when you open a new terminal.
To solve this, run this command line: (if using login-shell)
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bash_profile
Or this (if using non-login shell):
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bashrc
This will add the path to RVM to load at each Terminal instanciation (close & re-open a terminal after you did this).
You could also try, if you're sshd into your box, running sudo apt-get update and then installing it?
I had this problem as well. I found that I had to add the full path for rvm in the provisioning script. The path is added to the environmental $PATH variable but not known to Vagrant during the provisioning.
/usr/local/rvm/bin/rvm install ruby-2.4.0
After provisioning:
[vagrant#Ruby ~]$ echo $PATH
/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin: \
/usr/local/rvm/bin:/home/vagrant/.local/bin:/home/vagrant/bin
[vagrant#Ruby ~]$ which rvm
/usr/local/rvm/bin/rvm
Another option might be to source /etc/profile before executing an rvm, but I have not tried that yet.
Related
OSX - 10.8.5
Running Homebrew
rvm
Whenever I open a new shell I get the following and I think, "ugh", thats not good.
Last login: Thu Nov 7 07:12:43 on ttys000
-bash: /etc/profile.d/rvm.sh: No such file or directory
I then run echo $PATH and get
Matthews-MacBook-Pro-2:~ Matthew$ echo $PATH
/Users/Matthew/.rvm/gems/ruby-1.9.3-p448/bin:/Users/Matthew/.rvm/gems/ruby-1.9.3-p448#global/bin:/Users/Matthew/.rvm/rubies/ruby-1.9.3-p448/bin:/Users/Matthew/.rvm/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/opt/ImageMagick/bin:/usr/local/bin:/Applications/Postgres.app/Contents/MacOS/bin:/usr/local/rvm/gems/ruby-1.9.3-p448/bin:/usr/local/rvm/gems/ruby-1.9.3-p448#global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p448/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
Matthews-MacBook-Pro-2:~ Matthew$
I think my .bash_profile is a mess and I really would appreciate some ninja guidance...
Thank you
When you open the Terminal, you begin a bash shell session. You can set some commands to run every time you start a bash session. The place to put these initial bash commands is usually in ~/.bashrc or ~/.bash_profile. See if you have any reference to the file /etc/profile.d/rvm.shthere and check if that file actually exists on your machine.
UPDATE:
I have heard of problems if o installed rvm as sudo. Try removing it and reinstalling again without sudo:
sudo rm -rf $HOME/.rvm $HOME/.rvmrc /etc/rvmrc /etc/profile.d/rvm.sh \
/usr/local/rvm /usr/local/bin/rvm
sudo /usr/sbin/groupdel rvm # this might fail, it's not that important
Reopen terminal and make sure rvm ins removed:
env | grep rvm
It should return empty if not try to restart de computer. After it return empty you can install it:
bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
I installed rvm with rails, from the official website of RVM, I specified the command suggested by the tutorial.
When the installation my system has rails 4.0.0, rvm 01/23/12, ruby 2.0.0, bundler gem 1.3.5 and 2.0.3
But I need to install ruby 1.9 to practice with a course that I am currently doing. "Rails for Zombies 2"
I try to execute the instruction rvm install 1.9.3 and the console returns this message:
rvm: command not found
Possible duplicate of: Ubuntu rvm setup issue
Your problem is that RVM is not loaded when you open a new terminal.
To solve this, run this command line: (if using login-shell)
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bash_profile
Or this (if using non-login shell):
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bashrc
Or if you are using zsh (and/or oh-my-zsh):
echo "source $HOME/.rvm/scripts/rvm" >> ~/.zshrc
This will add the path to RVM to load at each Terminal instantiation. You must either close and reopen your terminals or simply call source ~/.bashrc (or ~/.bash_profile or ~/.zshrc).
I had this problem after installing zsh. I'm a domain user so my $PATH and $HOME are not as straight-forward. What worked for me was
echo "source /usr/share/rvm/scripts/rvm" >> ~/.zshrc
The latest installation needs the users to be added to the Group rvm and then need to login again.
Please note that closing the terminal and reopening is not enough; the user has to logout and log back to take the Group addition in effect.
Adding the user to the Group can be done by:
sudo usermod -a -G rvm <user>
The binaries can also be at different locations based on the method you followed during the installation.
I had them at /usr/share/rvm/
You can also look at /usr/local/rvm/scripts/rvm
Then you add this line to the end of ~/.bashrc
[[ -s /usr/share/rvm/scripts/rvm ]] && source /usr/share/rvm/scripts/rvm
Note: If you are using a shell other than bash you may need to add the path accordingly.
For instance, if you using zsh shell add the above lines to the ~/.zshrc file.
I followed this tutorial below:
https://www.digitalocean.com/community/articles/how-to-install-ruby-on-rails-on-ubuntu-12-04-lts-precise-pangolin-with-rvm
This worked perfectly for me; however, I have one small problem?
Each time I open a new terminal I have to run this command in order for rails to work:
source ~/.rvm/scripts/rvm
What is the problem and why is rvm not recognized
This is what I see after I open a new terminal and verify rails:
robert#rob:~$ rails -v
The program 'rails' is currently not installed. You can install it by typing:
sudo apt-get install rails
Thanks
I highly recommend you to use the official website to install RVM: https://rvm.io/rvm/install
Your problem is that RVM is not loaded when you open a new terminal, this is why you have to manually add the source at each instance of the Terminal.
To solve this, run this command line: (if using login-shell)
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bash_profile
Or this (if using non-login shell):
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bashrc
This will add the path to RVM to load at each Terminal instanciation (close & re-open a terminal after you did this).
Take a look at #mpapis comments
I know the above question is very common question. I have gone through multiple posts on this topic. But I didn't get any resolution.
I have installed rvm locally. We already have the installation files. SO went into the folder and run the install command.
$ ./install
Then I checked ./rvm folder in the Users home folde
$ cd ~/.rvm
folder exists. Hence Installation is successful.
Now I am typing rvm in the command line
$ rvm
I am getting below exception
$ rvm
-sh: rvm: command not found
After reading the multiple articles in stackoverflow on this issue, I learned that I have to add the below lines in .bash_profile as I am using Mac OSX 10.7.3
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
Even after I am getting same exception while typing rvm. Is there any thing extra I need to do? or Am I missing some thing? Please help
Steps to try out:
Log out and login to your system.
Open a new terminal and manually run
source $HOME/.rvm/scripts/rvm
then
rvm
Check these work-arounds.
Update:
To avoid running
source $HOME/.rvm/scripts/rvm
every time you open a terminal, include this line into ~/.MacOSX/environment in your Mac (This is similar to ~/.bashrc in GNU/Linux-based systems under $home aka ~ directory).
In my case, i am using Ubuntu Bash in Windows 10 and to fix the problem i used:
source /usr/local/rvm/scripts/rvm
For those that are doing this in 2018 just
add
source $HOME/.rvm/scripts/rvm
to your .bash_profile within your home directory.
you need to enable login shell in terminal emulator preferences, sometimes it is needed to use /usr/bin/bash --login, here is an example https://rvm.io/integration/gnome-terminal/
after enabling login shell you need to close terminal application and open it fresh.
I just had to open a new Terminal session.
After I installed it using:
curl -sSL https://get.rvm.io | bash -s stable --ruby
rvm install 2.2
For Ubuntu 18.04, I had to run the command below to solve the issue after rvm was installed using instruction from here.
source /usr/share/rvm/scripts/rvm
This is one of other options available for RVM:
source /etc/profile.d/rvm.sh
I am new to Rails and Linux and have installed RVM with sudo.
sudo bash -s stable < <(curl -s
https://raw.github/wayneeseguin/rvm/master/binscripts/rvm-installer)
Now I have to run most commands (like spork) with 'rvmsudo'. It is redundant, and the way I learned, when something is redundand it is often wrong. How to get rid of this nuance? Is the only way to reinstall RVM? If so, how to properly reinstall?
Use rvm implode to uninstall rvm. Check that there are no environment variables left over in /etc/profile, /etc/bash_profile or whatever shell you're using. Once you do that, then re-install using the single user guide found here.
You'll have to execute the implode command using sudo since you installed it as root.
1)remove in home directory:
rm -rf .rvm*
2)remove from your bash file:
[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"
3) remove from /etc/rvmrc file
sudo rm -rf /etc/rvm*
4)Delete everything else
sudo groupdel rvm
I couldn't find a complete/concise step-by-step to 100% remove rvm when it was run as root. Here's what I came up with, and I've tested it three times successfully:
sudo su -
rvm implode
groupdel rvm
rm /etc/rvmrc
rm /etc/profile.d/rvm.sh
You'll also want to double check that you don't have ~/.rvm or ~/.rvmrc or any rvm whatnot in your .bashrc (possibly .bash_profile on OSx), as you've likely been trying to install rvm several ways by this point!
Next, you'll need to reboot, as the global environment variables set in /etc/profile.d/rvm.sh will keep getting populated in new shells until you do. After rebooting, open a terminal and try this command to test:
echo $rvm_path
If it's empty, that means you've succeeded! If not, it'll most likely be set to /usr/local/rvm.