Doing it in a xib:
For some reason the contentView has an offset of 8px, although it has no constraints to it's parnet view (and I can't set one myself)
How can I set it to 0?
Constrain to margins. Set this property no. Its a new property. On constraint window.
Related
I'm using a scrollView and inside it used a view.
I set sizes like this:
I think the height of my view always is 959.
but when I change the height from 959 to 2000, I see a orange line and when I use Editor->resolve Auto..->update frames my custom hight returns to 959.
even when I set height from pin I see red lines:
I want all my content scrolling. The content's height is 2000.
You check this following way:
Scrollview Constraints:
Set top to your super view
Set bottom to your super view
Set leading to your super view
Set trailling to your super view
Take One UIView into scrollview and apply following constraints(Equal to same Scrollview width and Height)
Set top to scrollview
Set bottom to scrollview
Set leading to scrollview
Set trailling to scrollview
Dont forget to set Equal width to scrollview
Then do add your all UIElements whatever you want.
Consider like below:
lable 1----> set necessory constraint to UIView
lable 2----> set necessory constraint to UIView
lable 3----> set necessory constraint to UIView
lable 4----> set necessory constraint to UIView
lable 5----> set necessory constraint to UIView and you give Bottom constraint to UIView
Then scroll will automatically work..Dont adjust value like that.If you want more large screen Change View controller Simulated size to Freeform and there you adjust your prefer height and place scrollview based on that.
Using Storyboard, in UIViewController using UIScrollView, UIView as content view
Scrollview Constraints - top, bottom, left, right
UIView as contentview constraints - top, bottom, left, right, equal width height to ViewController's View.
I am using these constraints, can anyone please help me out why button is not calling?
The button is not clickable because it is below the frame of the content view. You need to remove all auto layout constraints from your content view (the UIView inside the scrollview).
Then you can add all the objects that you need to add to the content view and set the height of the content view according to the height of the content.
So lets say that you calculated a height of 1000 for the content of the objects in the scroll view. You would then need to set the frame of the content view like this:
contentView.frame = CGRectMake(0,0,scrollView.frame.size.width, 1000);
And don't forget to set the contentSize for the scrollview so that the scrollview knows how much room it needs to scroll.
Just now found the answer with removing any autolayout constraints, for content view we have to set constraints like below:
Top, bottom, left, right
Align CenterX - here we have to set the content view height then for that constraint we have to set constant as scrollview content size height
I have a ViewController. In it I put ScrollView with the View(contentView). Later I drag from contentView to View and set Equal Height. Now it scrolls, but not fully.
As you see there are it has continue below the textView, but it
doesn't scrolls. How can I fix it?
UIScrollView is able to automatically calculate it's content height and width, but you need to help it with this.
To do so you need to:
Bound contentView (in your case) to all sides of superview (which is Scroll View).
Let contentView to calculate it's sizes. Here is a small mistake in your approach. You've set height of the contentView equal to View's height. So basically Scroll View's contentSize.height is the same as View's height. Which is not really what you want with dynamic content.
Usually you want to set width of the contentView equal to View's width and do not set contentView's height. Instead you want to bind subviews of contentView to their superview in such a way that their superview (contentView) will calculate it's height automatically.
In your case I would bind:
pizza.jpg to left-top-right of superview (height of pizza.jpg will be set from intrinsic image size);
SAMPLE TITLE label - left-right to superview; top to pizza.jpg image;
Text View - left-bottom-right to superview; top to SAMPLE TITLE label; set a fixed height.
In this case contentView will define needed height by itself. Scroll View will set it's contentSize accordingly.
And your screen will be able to scroll vertically (it should be) ;)
You need to set the contentsize of the scrollview. Use the below code to do that:
func viewDidLayoutSubviews()
{
super.viewDidLayoutSubviews()
self.scrollView.contentSize = CGSizeMake(self.view.frame.size.width, self.contentView.frame.size.height);
}
To use Autolayout with UIScrollView is tricky.
In your code you have to update height constraint for your contentView by calculating height of subviews of contentView and that will automatically update the contentSize for your ScrollView and you can scroll through all subviews.
For more info to use Autolayout+UIScrollView your can read this.
According to this link (thanks to this Matt's answer first), UIScrollView acts differently with AutoLayout than the other views.
Subviews of a scrollView set their constraints from the contentView of the scrollView and not the scrollview directly. This allows the content to scroll.
So :
Add a UIView to your scrollView, this will represent the contentView of your scrollView. Add constraints to top, bottom, trailing, leading from the view to its superView
Interface Builder complains. Here you see the different between a basic view and a scrollView. The reason is a contentView has to be fill to know its size. So add a equal width from the contentView to the scrollView
The contentView knows now its width but not its height. So add your labels and your UIImage as subviews of the contentView. Add constraints from bottom to the top. Don't miss to add a height constraint to the UIImageView.
It should look like this :
Hope this helps
Read this (from Matt once again) for further informations
I'm trying to make layout inside scrollview using this one tutorial link
And get the following result link
It will be appreciated for any advices or tutorial links. It needs only vertical scrolling
I am sure there must be other ways to do this but a quick fix is :
1.) Create a width constraint on ContentView in Storyborad.
2.) IBOutlet that widthContraint and set its value to the view frame width in viewDidLoad.
Suppose the name of the constraint outlet is contentViewWidthContraint.
contentViewWidthContraint.constant = self.view.bounds.size.width;
Another alternative to do so from Storyboard, is to fix the Contentview width to the view's width from the storyboard or to the Scrollview, if Scrollview already has a Equal width contraint with superview . Add the "Equal Width" contraint from Contentview to either self.view or to Scrollview (if scrollview, already has the width contraint)
Have you set up the "ContentView" width to match with the scroll view width? I had the same problem and I fixed with "Equal Widths".
"Equal Widths" will tell to your "ContentView" to use the same width of the "Scroll View", which should be fitting the screen if you have set up the constrain properly.
You can do this easily on the storyboard.
Drag and drop, with right click (important!!!), from "ContentView" to "ScrollView"
Release the click, you will be prompted with a menu, select "Equal Widths".
This should fix your problem using the scrollview with AutoLayout from Storyboard editor.
You can find a full tutorial how to use ScrollView with Autolayout and Storyboard here.
I hope this is useful for you :)
In the Storyboard set the width of the elements contained in your UIScrollView equal to the width of this UIScrollView (by selecting all elements and the UIScrollView holding in the panel on the left of your Storyboard and then setting the 'Equal Widths' constraint under 'Pin' on the bottom of your Storyboard). Just pinning the right sides of the elements to that of the UIScrollView won't work as it will adjust the size of its "display view" to the width of the largest element and if this is smaller than the width of the UIScrollView all elements will just appear aligned to its left side.
There is also another possibility that offers a very good result.
You can mark a checkbox:
O programmatically:
scrollView.alwaysBounceVertical = true
Try to set it's width to 0 & height equal to content size like this:
self.scrollView.contentSize = CGSizeMake(0, self.scrollView.contentSize.height);
This will work as you want. Try it & tell if still facing any issue.
For disabling the horizontal scroll, you can set the content size in the -(void)scrollViewDidScroll method.
[self.scrollView setContentOffset: CGPointMake(0, self.scrollView.contentOffset.y)];
self.scrollView.directionalLockEnabled = YES;
This is because scroll view have no idea where your content should end.
But when at least one item inside your scroll view has its "trailing space" constraint attached to a view outside the scroll view (usually a view the scroll view is sitting in or some other view of a higher level, which "knows" its width) - the scroll view will automatically get an idea about your wanted width and won't scroll horizontally (unless that trailing constraint implies having your content outside the screen).
Better if all items inside scroll view have their "trailing space" constraints connected either to each other or to a view outside the scroll view. But not the scroll view itself.
No additional code or extra constraints needed for this to work.
Too set UIScrollView constraints as like below code so it will occupied whole screen.Not exceed the screen size.
Leading Space = 0 from mainView
Top Space = 0 from mainView
Bottom Space = 0 from mainView
Trailing Space = 0 from mainView
You need to set the width of UIScrollView equal to or less than the width of your Parent View. Two ways to do it:
1) You can do this in Storyboard via layout constraints
2) You can do this programatically:
self.scrollView.contentSize = CGSizeMake(self.view.frame.size.width, self.scrollView.contentSize.height);
My directory structure is this:
UIView
UIScrollView
UIView
Label
Label
I want to be able to center the uiView (the second one) to adjust its width for iphone 6. I set the uiscrollview width and height to constraint with 0 on all sides. Then when i set UIView constraints to all 0, which makes the uiview disappear. I don't know why it's disappearing?
If you are using autolayout with scrollView, you have some options.
First, you can set width and height constraint to contentView, so scrollView gets it as a contentSize. Second (in addition to first), you can fill the scrollView of views with size constraints. Third, you can set contentSize manually. Forth, you can make outlets for contentView size constraint and set them in viewWillLayoutSubviews manually.
So, your view dissappear because contentSize of scrollView is zero.