The iPhone 6 Plus has a "one handed mode" that Apple describes as "Keep everything within reach" on their iPhone design page.
The mode is enabled by double touching (but not pressing) the home button. When enabled the screen shrinks to roughly half its normal height.
Is there a way to enable this mode in simulator for testing how it looks and transitions?
I'm running Xcode 6 GM and have not been able to uncover anything. Worst case, can someone post the exact dimensions on device so it can be emulated via the resizable iPhone simulator?
Update: According to John Gruber's review, the feature is available on the iPhone 6 Plus and 6, and is not a "mode" so much as a momentary shortcut. Maybe since it only lasts for one tap it won't be important to do extensive testing. He shared a screenshot showing the corresponding size difference:
The simulator doesn't seem to have this capability, but it doesn't matter since it just moves your app's entire view down and uses the home screen background to fill the top. Devs don't need to do anything to their apps in regards to it.
Related
This question already has an answer here:
iPad screen doesn't support autolayout
(1 answer)
Closed 4 years ago.
When I launch my app in an iPhone, the UIViewControllers fit the screen. But in an iPad, the result is this:
The UIViewControllers don't fit the screen. Why is this happening?
Thats probably because use set iPhone as device in deployment info of general tab in target settings.
iPad can open iPhone apps by default but without any modification on it's layout. then you have a button on lower right corner to zoom in.
If you want your app to support both iPad and iPhone in a native way, you should pick universal. BUT BE CAREFUL! Once you pick universal and upload it tho appstore, there is no way back to change it to single mode (iPhone/iPad only) and you shod continue supporting all platforms. The only way is to delete project entirely and create new one and it means that you may loose all of your users by loosing continues delivery.
All my existing apps are not scaled to iPhone X, is there any way to make them to full screen without an update.
It will be really helpful if we don't have to go to the hassle of upgrading all the apps again.
And if not what are the options of doing it.
It is reminding me of days back to iPhone 6.
No, you can’t get your app out of letterboxed mode without at the very least updating your app to use a launch storyboard (and building it against the iOS 11 SDK).
Also, just doing that might not make your app work right on iPhone X — unless all your UI is built from only basic uses of system view controllers, you’re likely to have at least a few issues where you need to tweak your layout to respect safe areas. (Otherwise you end up with UI hiding under the notch or rounded corners.)
This question already has an answer here:
The keyboard in my iOS app is too tall on the iPhone 6. How can I adjust the resolution of the keyboard in XCode?
(1 answer)
Closed 5 years ago.
In our iOS apps, I have seen that if we leave out certain launch images sizes, that the screen appears as if it is scaled up from a lower resolution device.
When this happens, the devices also display a taller keyboard with chunkier looking text.
When built in on my iPhone 6s+, from Xcode 7.x the keyboard in our app is 1 & 7/8ths" of an inch tall.
Looking at Skype, Slack, Waze, Messages, on the same device the keyboard is 1 & 3/8ths" tall.
I'm using whatever the standard keyboard is when our app's text fields are tapped on.
I have seen that this can be caused by missing launch images at the target device's size, but I'm not sold that this is the only cause. Does anyone have any insight why an app would appear at a lower resolution than what is native to the device?
Is there a known issue related to launchImages or some other factor that might be causing this?
In some of my testing, at one point I got the app to launch as expected at the correct size after switching full size retina launch images. This may have been fixed by building under Xcode 8.x, but I'm not sure and we can't do that yet because of other limitations.
Thanks much.
It's related to Launch Images in assets because when iPhone 5 came out first, XCode had this functionality to add certain launch image sizes to zoom in the UI of smaller screens and make it compatible to iPhone 5's screen. This was called Branding when I worked on it to make app compatible to bigger screen in a short time.
But it isn't the preferred way and you should avoid using Launch Images, use Launch.xib instead to create your Launch Screen. You can also use Launch.storyboard, whatever you prefer. It won't zoom in the Keyboard or other UI aspects then.
Hope it helps!
I have an iPad app that I'm converting to a universal app to show on phones. It has both a tab bar and a navigation bar, and my problem is that they are both way too big on the phone. I could swear I heard Paul Hegarty (from the iTunes U class from Stanford on Swift app development) mention a switch or trick somewhere that would cause the bars to adapt to the iPhone, but I can't find it.
Here are screenshots of my apps bars, vs the Photos app in the iPhone 6 simulator to show what I'm talking about.
Not a huge difference, but significant on a small phone screen.
My fonts are also way to big, which is confusing since I have them set to the system "headline" or "body" options for all size classes, but that may be a separate issue.
Any help is greatly appreciated!
App written in Swift, using storyboards for iOS8, btw.
Edit:
The more I look at this, the more I'm convinced it's not related to the bars, but the entire app - the fonts and everything. The whole app appears to be zoomed in to 120%, which is subtle, but looks really bad and wastes space.
I have also now seen this in a second app - the Apple DateCell sample. It also appears 'zoomed in' when run on the iPhone 6 simulator.
Edit 2:
This effect is even more exaggerated on the iPhone 6 Plus simulator - everything is even more 'zoomed in' looking - the top and bottom bars are almost twice the height they should be. This can be seen by downloading the Apple DateCell sample and running it.
Edit 3:
ARGGGG, all this time wasted, and it was due to the launch screen image - why on earth would a launch screen image not being set cause the entire app to scale?
I finally figured this out - it was related to the launch screen image. Apparently if it's not setup right, the whole app scales on the iPhone 6 and 6 Plus for some reason. This question is what pointed me to the answer.
For me, I had to both create a LaunchScreen image in Assets, and set it in the project file, and ALSO select the launchScreen.xib as the Launch Screen File in the project. I don't have a real launch screen yet, so these are both just empty or defaults in my case.
Does anybody know why home button is missing for iPad simulator only?
Its a simple redesign to make more space for the simulator screen. You can trigger the home button from the menu Hardware > Home Or using the shortcut: ⇧⌘H.
I don't think this is an enhancement at all. This is by far a notorious bug and a bad one. I know that home button action can be reproduced by cmd-H or its double click by doing cmd-H twice, though it could activate the slow motion animations too (annoying!). My point here is that whenever you run the simulator and start testing doing rotations (cmd-arrows), at one point you won't be able to tell if iPad orientation is to the right or to the left!... there's no visual clue whatsoever!
Bad Apple!, bad Apple!
It appears it is looking at whether or not there is adequate screen resolution to display the bezel. For example, I have a 17" Macbok pro that I develop on (1920x1200 resolution). When I launch an iPad development project and the suimulator comes up on my Macbook pro's desktop, no problem, the bezel shows. But let's say I then drag it over to my external monitor which is 1920x1080, then quit and relauinch the simulator... it comes up without a bezel.
My co-worker who has a Macbook Pro 13" (lower resolution), never sees the bezel. I suspect the newer retina Macbook Pros will always show a bezel.
This is of course, al pertaining to the regular, non-retina iPad simulator. I am not sure if given adequate screen resolution, the iPad retina simulator would show a bezel or not?
See http://openradar.appspot.com/11017007 for the real answer: "Engineer who removed the bezel from scaled iOS Sim not thanked enough, probably"
I personally don't need more screen space for the simulator with my Thunderbolt 27" display. I'd like the frame back, thank you very much! I also noticed with this version the application icons often show as blank white icons, even for Safari and Photos.
No, but you can trigger it from the menu bar (Hardware -> Home).