I have around 100 pictures that i want to add white border to it all at once.
I use Linux and also use gimp ,.. please suggest me something to do so online of offline.
and one more thing that i have tried convert option on imagemagick but nothing happen.
If you want to do 100 all at once you will be best off using ImageMagick's mogrify command like this to add a 10 pixel white border around all images:
mogrify -mattecolor white -frame 10x10 image*.jpg
If the images are not all in a single directory, you can do the following which will do the same thing across all subdirectories of the one you are currently in:
find . -name \*.jpg -exec convert "{}" -mattecolor white -frame 10x10 "{}" \;
Obviously you can change the 10 to a different number of pixels if you wish.
Please make a backup before using this as I may have misunderstood your needs.
Updated
If you want a drop shadow, you really need to be working with PNG rather than JPG since the former supports transparency and the latter doesn't - but IM can convert your JPEGs to PNGs anyway. I use the following command for drop shadows:
convert image.jpg \( -clone 0 -background black -shadow 80x3+0+8 \) -reverse -background none -layers merge +repage image.png
So, I would apply that to a pile of images like this:
#!/bin/bash
for f in *.jpg; do
new=${f%%jpg}png # Work out new name = original name minus "jpg" + "png"
echo Processing $f into $new
convert "$f" \( -clone 0 -background black -shadow 80x3+0+8 \) -reverse -background none -layers merge +repage "$new"
done
Related
Is it possible to write a script that can create a copy of all the pictures in a file and add a white border to it with the border multiplied by a certain percentage?
I want the width of the new image (old image + border) to be about 134% of the old one and height about 165% of the old one.
I imagine this is fairly simple but not positive how and all my attempts so far have been unsuccessful.
My current code so far is:
'''for i in ls; do name = "mat_$i" echo "processing $name..." ; convert $i -bordercolor white -border 1x2 $name; done''''
The 1x2 is off for sure, but nothing I have tried there worked either.
I would also like to add meta data as some of these pics are professional and maybe distributed online. Thanks in advance.
Here is one way for Imagemagick 6.
Input:
infile="barn.jpg"
bgcolor="red"
inname=`convert "$infile" -format "%t" info:`
declare `convert "$infile" -format "ww=%[fx:w*134/100]\nhh=%[fx:h*165/100]" info:`
convert -size ${ww}x${hh} xc:"$bgcolor" "$infile" -gravity center -composite "${inname}_pad.jpg"
Result:
For Imagemagick 7, you can do that inline as follows:
magick barn.jpg -size "%[fx:w*134/100]x%[fx:h*165/100]" xc:red +swap -gravity center -composite barn_pad.jpg
I want to split some images by percentage using ImageMagick.
To be more precise, I want to split an image into two images. The output-image of the left side should be 55% of the left side of the original image, the output-image of the right side should be 55% of the right ride of the original image.
(In case I am not making myself clear: The point is that there is sometimes important information in the middle of the images and this information would be cut off if we split the images exactly in the middle.)
What I have so far is this: mogrify -crop 55%x100% +repage -path ./cropped *.jpg
So at the moment, I am splitting the image into two and saving it in the "cropped"-folder. BUT, only the left side is 55% of the left side of the original image, the right side is 45% of the right side of the original image.
As this is my first time working with ImageMagick, I would really appreciate your help!
Here is another approach to splitting an image to create two output images that are 55% from the left and 55% from the right of the original...
convert input.png -set filename:0 "%[t]" \
\( +clone -roll +55+0% \) -extent 55x100% "%[filename:0]_%d.png"
That starts by setting a file name variable to use for the output. Then it makes a clone of the input image, and rolls it 55% to the right. The result is moving the rightmost 55% of the image out of the frame to the right and back into the frame on the left. Then after the parentheses a simple -extent operation keeps the leftmost 55% of each image. The output files are named from the input file with a "_0" or "_1" added.
As fmw42 suggested, you can make a loop command to run on multiple inputs, and include the path names in the command for your output files.
I think you would have to run a script loop over each image and use convert rather than mogrify. Mogrify can only output one image for each input image. You do not say what platform/OS or what version of ImageMagick. The following assumes Unix-like system with IM 6 and is one way to do that.
infile="original_file.suffix"
convert "$infile" -set filename:fname "%t" -write mpr:img +delete \
\( mpr:img -gravity west -crop 55x100%+0+0 +repage +write "path_to/cropped/%[filename]_0.suffix" \) \
\( mpr:img -gravity east -crop 55x100%+0+0 +repage +write "path_to/cropped/%[filename]_1.suffix" \) \
null:
Or, you could just run mogrify twice. Once for the left side and once for the right side. Use -gravity to control which as in the convert command.
I'n very new to imagemagick and i need to learn how could i combined these two commands to make it work.
I need to add background image to a transparent image. I tried to combine these two commands but was not successful.
magick mogrify -path Output_Path -trim -filter Triangle -define filter:support=2 -thumbnail 450x450 -gravity center -extent 500x500 -unsharp 0.25x0.25+8+0.065 -dither None -posterize 136 -quality 82 -define jpeg:fancy-upsampling=off -define png:compression-filter=5 -define png:compression-level=9 -define png:compression-strategy=1 -define png:exclude-chunk=all -interlace none -colorspace sRGB -strip Transparent_Image_Path
magick Background_Image.png Transparent_Image.png -composite output.jpg
Result Should Be Like This :
Image Reference
Thanks in advance!
There are several possible syntaxes, depending on how your brain likes to work ;-)
What you need to bear in mind when trying to understand this is that all processing operations, e.g. -crop or -resize apply to all loaded images. So, you either need to load images that need processing and process them before loading images you don't want affected, or you need to restrict processing to certain images only... using parenthesised "aside" operations.
You can proceed like this:
load transparent foreground image first and process it before loading the background image, then
load background image, then
exchange the order and composite
That looks like this:
magick FOREGROUND.PNG -resize ... -crop ... \
BACKGROUND.PNG \
+swap -composite RESULT.JPG
Alternatively, you could:
load the background image, then
load the foreground image and process it "aside" within parentheses so that the background image is not affected
composite
That looks like this:
magick BACKGROUND.PNG \
\( FOREGROUND.PNG -resize ... -crop ... \) \
-composite RESULT.JPG
If you need to independently process both background and foreground images prior to compositing, use:
magick \
\( BACKGROUND.PNG -resize ... -crop ... \) \
\( FOREGROUND.PNG -resize ... -crop ... \) \
-composite RESULT.JPG
Note that if you use Windows:
the backslashes at line-ends become carets (^) and may not have trailing spaces after them,
the backslashes preceding opening and closing parentheses must be omitted,
most single quotes probably need replacing with double quotes - probably not applicable to this specific question.
Note that your command is probably unnecessarily complicated, I would recommend omitting quite a lot of it and seeing how you get on. For example, all the define png:XXX=YYY settings are irrelevant if you aren't creating a PNG as output.
You can carry forward the JPEG-related parameters (quality, interlace, upsampling) and put them in anywhere you like, probably at the start like this, but put the colorspace and strip at the end to ensure both input files are stripped:
magick -quality 82 -define jpeg:fancy-upsampling=off \
BACKGROUND.PNG ... \
FOREGROUND.PNG ... \
-composite -colorspace sRGB -strip RESULT.JPG
I have a set of images, and I can use the Imagemagick montage command on them to produce a montage image file with transparent background (let's call this fgimg). Now I have another existing image (let's call this bgimg) that I'd like to use (after some special processing with the convert command) as the background for fgimg, which can be achieved within the same convert command. At this point it seems trivial to avoid writing the temporary fgimg to disk, simply by piping the standard output of montage to the standard input of convert.
My problem is that the special processing I'm applying to bgimg will require some knowledge of the image properties of fgimg (e.g., resizing bgimg to have the same size as fgimg), which I don't know in advance. How can this information be retrieved and used in the convert command?
Note: I'm using Imagemagick version 6.9.7-4 on Linux.
I'll include some commands below to further illustrate the problem in detail.
The following command produces the montage image fgimg from a set of input images. The output is in the 'special' miff format (which seems best for temporary output to be worked on later), and has transparent background so that the actual background can be applied later. Most of the other options here are not important, but the point is that the output size (dimensions) cannot be determined in advance.
montage input_*.jpg -tile 5x -border 2 -geometry '200x200>+20+20' \
-gravity center -set label '%f\n%G' -background none -fill white \
-title 'Sample Title' miff:fgimg
Next, I have another input image bgimg.jpg. I want to perform some processing on it before using it as background to fgimg. The processing can be quite complex in general, but in this example, I want to:
resize bgimg.jpg to fit inside the dimensions of fgimg without any cropping;
apply a fade-to-black effect around the edges;
make it the same size as fgimg, with a black background;
combine this with fgimg to produce the final output.
Notice that I need the size of fgimg in two places. I can first extract this into a shell variable:
size=$(identify -format '%G' miff:fgimg)
Then I can do all the steps above in one convert command (note that $size is used twice):
convert "bgimg.jpg[$size]" -gravity center \
\( +clone -fill white -colorize 100% -bordercolor black \
-shave 20 -border 20 -blur 0x20 \) -compose multiply -composite \
-background black -compose copy -extent $size \
miff:fgimg -compose over -composite final_out.jpg
Now here is the problem: I want to avoid writing the temporary file fgimg to disk.
I could replace miff:fgimg with miff:- in both the montage and convert commands and then just pipe one to the other: montage ... | convert .... But how do I deal with the $size?
I tried to use file descriptors (miff:fd:3) but this does not seem to work, which is confirmed by the comments to this question.
Is there a way to do this (in Imagemagick v6) without creating a temporary file?
This example command uses ImageMagick v6 on a bash shell. Instead of "montage" it starts by using "convert" to create a "logo:", one of IM's built-in sample images, then pipes it out as a MIFF and into the "convert" command that follows. You can pipe the output of "montage" just as easily. And it uses another IM built-in image "rose:" as your "bgimg.jpg"...
convert logo: miff:- | convert - rose: \
+distort SRT "%[fx:t?min(u.w/v.w,u.h/v.h):1] 0" \
-shave 1 +repage -gravity center -bordercolor black \
\( -clone 1 -fill white -colorize 100 -shave 6 -border 6 \
-blur 0x6 -clone 1 -compose multiply -composite \) -delete 1 \
\( -clone 0 -alpha off -fill black -colorize 100 \
-clone 1 -compose over -composite \) -delete 1 \
+swap -composite final_out.jpg
That reads the piped image "-" and the background image "rose:".
Then it uses "+distort" with an FX expression to scale "rose:" to the maximum dimensions that still fit within the original piped input image. That operation adds a pixel all around so we use "-shave 1" to get rid of that.
Next inside parentheses it clones that re-scaled background image, makes an edge blur mask, and composites them to make the fade-to-black edge on the background image. Right after the parentheses it deletes the non-edged background image.
In the next parentheses it clones the input image, makes it black, clones the modified background image, and composites it centered over the black one. Again the non-extended background image is discarded after the parentheses with "-delete 1".
Finally the modified background and the input image are put in the proper order with "+swap" and composited for the final output. Run this command without the last "-composite" to see the two images that result from the prior parts of the command.
Both the main input image and background image can be any size, any dimensions, and any aspect ratio. This works for me on v6.8.9 on a bash shell. It should work on any ImageMagick newer. It should work on Windows by removing all the backslashes that escape parentheses and changing the continued-line backslashes "\" to carets "^".
EDITED TO ADD:
You can use that FX expression to find the scaling amount, save it as a variable, then isolate the background image inside parentheses and use that variable to do the scaling and shaving there. That way it only affects the background image. There may be a rounding error with that, but the main image, which determines the exact final output dimensions, will be unaffected. Note the difference in the first few lines of this command...
convert logo: miff:- | convert - rose: \
-set option:v1 "%[fx:min(u.w/v.w,u.h/v.h)]" \
\( -clone 1 +distort SRT "%[v1] 0" -shave 1 \) -delete 1 \
+repage -gravity center -bordercolor black \
\( -clone 1 -fill white -colorize 100 -shave 6 -border 6 \
-blur 0x6 -clone 1 -compose multiply -composite \) -delete 1 \
\( -clone 0 -alpha off -fill black -colorize 100 \
-clone 1 -compose over -composite \) -delete 1 \
+swap final_out.jpg
I have some png images that I want to split it into parts, like by grid or size.
But each part should have the same bounding box (transparency) as original image.
Example:
Splitting image into 2 parts.
Original: 200 × 89
Output:
part_1.png, 200 × 89
part_2.png, 200 × 89
Can ImageMagick do this? Or any other app or method.
My actual goal is to split into 100+ slices images.
EDIT:
Another goal to have an indents for each slice. Say indent = 10px.
Example:
Input: 200 x 100
Output:
part_1.png, 200 x 100
part_2.png, 200 x 100
And just as example, to visually compare input and output: combined output images in Photoshop as layer added one onto another
200 x 100 :
Also this is showing input image added onto combined(so it's better to see what was cropped and how):
In ImageMagick, you can split an image into many parts with the -crop command. For your example above with two parts, you can do that with the following commands. ImageMagick will append -0, -1 ... to the output file names.
ImageMagick 6:
dim=`convert image.png -format "%wx%h" info:`
convert \( -size $dim xc:none \) null: \( image.png -crop 50x100% \) -layers composite result.png
ImageMagick 7:
magick \( image.png -set option:dim "%wx%h" -crop 50x100% \) null: \( -size "%[dim]" xc:none \) -reverse -layers composite result.png
The results are:
See
http://www.imagemagick.org/Usage/crop/#crop
http://www.imagemagick.org/Usage/crop/#crop_percent
http://www.imagemagick.org/Usage/crop/#crop_tile
http://www.imagemagick.org/Usage/crop/#crop_quad
http://www.imagemagick.org/Usage/crop/#crop_equal
http://www.imagemagick.org/script/command-line-options.php#layers
Note that -crop keeps the virtual canvas information if you do not add +repage afterwards. So to put the individual images back into their original placement, you have to composite them onto a transparent background the size of the input. That is done in one command using -layers composite using the null: separator.
Here is another way to add transparent areas between parts of a crop in ImageMagick. Crop the image into pieces, chop off the parts you want to remove, then pipe to montage to add the spacing back.
Input:
Here I make this into a 4x4 grid of images with 10 pixel spacing:
convert lena.png -crop 25%x25% +repage -gravity east -chop 10x0 -gravity south -chop 0x10 +repage miff:- | montage - -background none -tile 4x4 -geometry +5+5 result.png
To answer your new question, you can do that with a script loop. On a Unix-like platform, assuming your images do not have spaces, you can do the following:
cd path/to/current_folder
list=`ls *.png`
for img in $list; do
name=`convert $img -format "%t" info:`
dim=`convert $img -format "%wx%h" info:`
convert \( -size $dim xc:none \) null: \( $img -crop 50x100% \) -layers composite -scene 1 path/to/new_folder/${name}_%d.png
done
If you want leading 0s in the output, say 3, use path/to/new_folder/${name}_%03d.png.
Note that to start with 1 rather than 0, I have added -scene 1.
Sorry, I do not know how to script for Windows.
Please always provide your ImageMagick version and platform.
In ImageMagick, the best way to put transparent areas into your image is with a binary mask that is put into the alpha channel of your image.
convert input.png \( -size 200x89 xc:white -size 10x89 xc:black -gravity center -composite \) -alpha off -compose copy_opacity -composite result.png
You can add as many blank areas as you want by adding more white areas to the mask or by tiling out one region of black and one region of white to create the mask with regular spacing of black and white.
Edited to add this ImageMagick 6 example which splits the input image into 4 pieces, 25% of the original width and 100% of its height, then creates a transparent canvas for each piece the same dimensions of the input image, and locates the pieces at their original offsets on those canvases.
convert input.png -set option:distort:viewport %[w]x%[h] -crop 25x100% \
-virtual-pixel none -distort affine "0,0 %[fx:s.page.x],%[fx:s.page.y]" out%03d.png
The output file names will be numbered starting from zero like "out000.png", etc.
Original message...
Here's a simple command using ImageMagick 7 that can crop an image into any number of pieces, and output all the pieces at their original offsets on transparent backgrounds of the original input dimensions...
magick input.png -crop 100x1# -background none \
-extent "%[fx:s.page.width]x%[fx:s.page.height]-%[fx:s.page.x]-%[fx:s.page.y]" out%03d.png
That "-crop 100x1#" tells it to split the image into a grid 100 pieces wide by 1 piece high. You could just as well specify the crop sizes as percents or numbers of pixels.
Edited again to add:
This following command will split the input image into the individual pieces specified with the "-crop" operator, then shave 5 pixels from every side of each piece, then apply a 5 pixel transparent border to every side of each piece. It will still remember the original locations of the pieces within the input canvas, so the "-distort affine ..." can extend the canvases and place the pieces where they were in the input image.
convert input.png -set option:distort:viewport %[w]x%[h] \
-bordercolor none -background none -virtual-pixel none \
-crop 25x100% -shave 5x5 -border 5x5 \
-distort affine "0,0 %[fx:s.page.x],%[fx:s.page.y]" out%03d.png
To use this command with IM7 you need to change "convert" to "magick".
Given the changes of requirements provided by Kamikaze, here is one way to achieve the split with indent in ImageMagick, assuming I understand correctly.
dim=`convert image.png -format "%wx%h" info:`
convert \( -size $dim xc:none \) null: \( image.png -crop 50x100% -shave 5x5 \) -geometry +5+5 -layers composite result.png
To check, I flatten over a blue background:
convert result-0.png result-1.png -background blue -flatten result.png