In my game i move many skspritenode along the same cgpath by :
[SKAction followPath:APath asOffset:NO orientToPath:YES duration:68]
If i add in scene all my skpritenodes at the same time they overlapping during followpath animation, so i have to add each sprite with some delay... In this way the sprites can't overlap but during the game i have "jittering" every time i had one of this sprite. I use something like this:
SKAction *InsertSpriteAction=[SKAction repeatActionForever:[SKAction sequence:#[[SKAction performSelector:#selector(AddSprite) onTarget:self],[SKAction waitForDuration:0.5]]]];
and to add the sprite:
-(void)AddSprite{
if (NumberofSprite<50) {
SKSpriteNode *Sprite=[SKSpriteNode spriteNodeWithImageNamed:#"sprite.png"];
Sprite.size=CGSizeMake(8, 8);
Sprite.position=CGPointMake(1320, 570);
[_worldNode addChild:Sprite];
NSMutableArray *textures = [NSMutableArray arrayWithCapacity:10];
for (int i = 1; i < 10; i++) {
NSString *textureName =
[NSString stringWithFormat:#"sprite%i", i];
SKTexture *texture =[SKTexture textureWithImageNamed:textureName];
[textures addObject:texture];
}
SKAction *spriteAnimation = [SKAction animateWithTextures:textures timePerFrame:0.2];
SKAction *repeat = [SKAction repeatActionForever:spriteAnimation];
[Sprite runAction:repeat];
[Sprite runAction: [SKAction repeatActionForever:[SKAction followPath:APath asOffset:NO orientToPath:YES duration:68]]];
NumberofSprite++;
}
else{
[self removeActionForKey:#"addingsprites"];
}
}
How i can start my sprites at different point along the path? With many startpoint in the same path i can add all my sprite at once during level loading and start a follow path without overlappings...
Related
I have a row of 5 sprites and they spawn every 4 seconds and move down along the Y-axis. The sprites are spawning the correct amount each time, I have 5 sprites equal spaced apart across the screen, they're all center perfectly.
However when the performSelector action is called, when it spawns them in they don't go to the right position. The move over to the left so far that I can only see half a sprite on the left side of the screen. After testing it, it seems they are all stacked on top of each other at the wrong position.
Any idea whats going on? I'd appreciate any help. Here's all the code I'm using in the scene.
-(void) addBricks:(CGSize)size {
for (int i = 0; i < 5; i++) {
//create brick sprite from image
SKSpriteNode *brick = [SKSpriteNode spriteNodeWithImageNamed:#"brick"];
//resize bricks
brick.size = CGSizeMake(60, 30);
//psoition bricks
int xPos = size.width/7.5 * (i+.5);
int yPos = 450;
brick.position = CGPointMake(xPos, yPos);
//add move action
SKAction *wait = [SKAction waitForDuration:3];
SKAction *move = [SKAction moveByX:0 y:-36.9 duration:1];
SKAction *sequence = [SKAction sequence:#[wait, move]];
SKAction *repeatMove = [SKAction repeatActionForever:sequence];
[brick runAction:repeatMove];
[self addChild:brick];
}
}
-(id)initWithSize:(CGSize)size {
if (self = [super initWithSize:size]) {
self.backgroundColor = [SKColor colorWithRed:(243.0f/255) green:(228.0f/255) blue:(165.0f/255) alpha:1.0];
//add action to spawn bricks
SKAction *spawn = [SKAction performSelector:#selector(addBricks:) onTarget:(self)];
SKAction *delay = [SKAction waitForDuration:4];
SKAction *delayThenSpawn = [SKAction sequence:#[delay, spawn]];
[self runAction:[SKAction repeatActionForever:delayThenSpawn]];
[self addBricks:size];
}
return self;
}
as LearnCocos2D mentioned in your last question.. you cant use a selector when youre passing a parameter into a method.
addBricks expects size .. you arent passing size into it.
change your spawn action to
SKAction *spawn = [SKAction runBlock:^{
// make this whatever size you want, i'm just using the scene's size
[self addBricks:self.size];
}];
that should get you started
Ok I'm fairly new to coding with sprite kit so I don't know too much. I'm trying to make 5 bricks spawn above the scene and then slide down into the scene every 5 seconds. I thought this code would work but it does absolutely nothing to my scene.
I have another method that has bricks already loaded into the scene and that works so I don't think that would affect this much but not really sure.
-(void) spawnMoreBricks:(CGSize)size {
for (int i = 0; i < 5; i++) {
SKSpriteNode *brick = [SKSpriteNode spriteNodeWithImageNamed:#"brick"];
//resize bricks
brick.size = CGSizeMake(60, 30);
//position it
brick.position = CGPointMake(self.size.width/2, self.size.height);
SKAction *wait = [SKAction waitForDuration:5];
SKAction *spawn = [SKAction scaleTo:1 duration:0];
SKAction *move = [SKAction moveByX:0 y:-80 duration:3];
SKAction *spawnSequence = [SKAction sequence:#[wait, spawn, move]];
[self runAction:spawnSequence];
}
}
SKAction *wait = [SKAction waitForDuration:5];
SKAction *spawn = [SKAction runBlock:^{[self addChild: brick];
SKAction *move = [SKAction moveByX:0 y:-80 duration:3];
[brick runAction: move];
}];
SKAction *spawnSequence = [SKAction sequence:#[wait, spawn]];
[self runAction:spawnSequence];
Here is a modified set of actions to use. The problem was that you were running all the actions on the scene itself. The code provided runs a sequence on the scene that waits 5 seconds (acting as the delay), and then runs a spawn action. runBlock allows us to add the brick to the scene, create the move action, and apply that action to the brick (not the scene)
I have a sequence of SKActions that I would like to play but they do not play properly. The eye only closes and never opens again. I have no clue why this is occurring but maybe you do! Help is appreciated, thank you.
-(void)blink {
SKAction *delay = [SKAction waitForDuration:3];
SKAction *blinkEye = [SKAction resizeToHeight:1 duration:.2];
SKAction *delay2 = [SKAction waitForDuration:.5];
SKAction *openEye = [SKAction resizeToHeight:3 duration:.2];
SKAction *group1 = [SKAction group:#[delay,blinkEye]];
SKAction *group2 = [SKAction group:#[delay2,openEye]];
SKAction *all = [SKAction sequence:#[group1,group2]];
SKAction *repeat = [SKAction repeatActionForever:all];
[self runAction:repeat];
}
In MyScene.m
-(void)update:(CFTimeInterval)currentTime {
/* Called before each frame is rendered */
Player *player = (Player *)[self childNodeWithName:#"player"];
Player *lefteye = (Player *)[player childNodeWithName:#"leye"];
Player *righteye = (Player *)[player childNodeWithName:#"reye"];
[lefteye blink];
[righteye blink];
}
There's no need for grouping, it's causing the problem.
SKAction *delay = [SKAction waitForDuration:3];
SKAction *blinkEye = [SKAction resizeToHeight:1 duration:.2];
SKAction *delay2 = [SKAction waitForDuration:.5];
SKAction *openEye = [SKAction resizeToHeight:3 duration:.2];
SKAction *all = [SKAction sequence:#[delay,blinkEye, delay2,openEye]]];
And letting blink the eye on every frame update can't work. This function is called up to 60 times a second.
Instead do it like this on creation of the eye object:
SKAction *delay = [SKAction waitForDuration:3];
SKAction *blinkEye = [SKAction resizeToHeight:1 duration:.2];
SKAction *delay2 = [SKAction waitForDuration:.5];
SKAction *openEye = [SKAction resizeToHeight:3 duration:.2];
SKAction *all = [SKAction sequence:#[delay,blinkEye, delay2,openEye]]];
//create the lefteye object
lefteye = [[Eye alloc] init...];
//create the righteye object
righteye = [[Eye alloc] init...];
[lefteye repeatActionForever:all];
I'm still fairly new to programming and what I tried to do is the following: So I separated my Enemies from my game scene to a different class.
In the Enemy class.m file I declared 6 methods. Every method represents a new level, which will get called from the game scene.
So in the methods I declare the sprite's image, path, shooting particle type, etc..
Here's an example of the level 1 method in the EnemyClass.m file:
+(void)enemiesLevel1
{
EnemyName = #"enemy1";
SKSpriteNode* enemy = [SKSpriteNode spriteNodeWithImageNamed:EnemyName];
pathSpeed = 3;
CGPathRef path = CGPathCreateWithEllipseInRect(CGRectMake(0,0,400,400), NULL);
SKAction *followTrack = [SKAction followPath:path
asOffset:NO
orientToPath:YES
duration:pathSpeed];
SKAction *forever = [SKAction repeatActionForever:followTrack];
SKAction *addEnemy = [SKAction runBlock:^{
[GameScene addChild: enemy];
}];
SKAction *enemySequence = [SKAction sequence:#[addEnemy, forever]];
[GameScene runAction: enemySequence];
}
However, Xcode is states two issues:
No known class method for selector "addChild"
and
No known class method for selector "runAction"
I'm calling the method from GameScene.m with:
[EnemyClass enemiesLevel1]
It may seem like a dumb question, but I am still new and I would greatly appreciate any help!
The problem is, you should create instance of EnemyClasss in your GameScene and then use it; your code should look like this;
In EnemyClass.m:
-(void)enemiesLevel1
{
EnemyName = #"enemy1";
SKSpriteNode* enemy = [SKSpriteNode spriteNodeWithImageNamed:EnemyName];
pathSpeed = 3;
CGPathRef path = CGPathCreateWithEllipseInRect(CGRectMake(0,0,400,400), NULL);
SKAction *followTrack = [SKAction followPath:path
asOffset:NO
orientToPath:YES
duration:pathSpeed];
SKAction *forever = [SKAction repeatActionForever:followTrack];
SKAction *addEnemy = [SKAction runBlock:^{
[self addChild: enemy];
}];
SKAction *enemySequence = [SKAction sequence:#[addEnemy, forever]];
[self runAction: enemySequence];
}
In GameScene.m:
EnemyClass *enemy= [[EnemyClass alloc] initWithSize:self.size];
and then you can use:
[self addChild: [enemy enemiesLevel1]];
How can I tell the walk cycle to continue animating until an NSNumber with bool flag stops it?
And also remove the SKSpriteNode with the SKTexture from the stage?
SKSpriteNode *walk = [SKSpriteNode spriteNodeWithTexture:[_walkTextures objectAtIndex:0]];
walk.zPosition = 100;
walk.scale = spliffScale;
walk.position = location;
[self addChild:walk];
SKAction *walkAction = [SKAction animateWithTextures:_walkTextures timePerFrame:0.03];
SKAction *remove = [SKAction removeFromParent];
[walk runAction:[SKAction sequence:#[walkAction, walkAction, remove]]];