I want to add paging in my collectionView. I am using Waterfall layout in my collection View. Having two rows only.
Scrolling is horizontal. I want to add paging in such a way that user can go back and forth the pages.
I found one of that over Git by Simon Westerlund. But in this UIrefreshCOntrol is added at the top only. I want to ahev UIrefresh control at the bottom too. So that I can show paging Effect. Just as, its in the case of Facebook app
I think you can use bounce effect of UICollectionView coz its already inherited from UIScrollView and use following delegate method
You just have to add following lines and call your method instead of [self fetchMoreEnteries]
- (void)scrollViewDidEndDecelerating:(UIScrollView *)scrollView
{
float endScrolling = scrollView.contentOffset.y + scrollView.frame.size.height;
if (endScrolling >= scrollView.contentSize.height)
{
NSLog(#"Scroll End Called");
[self fetchMoreEntries];
}
}
Related
I'm racking my head over this one, I know this has to be possible but after going over every bit of documentation I still can't come up with something that works well.
Basically, I have a UICollectionView in the LAST cell of a UITableView. What I want to happen is, only when the UITableView is totally scrolled to the bottom, can the UICollectionView in it's last cell start scrolling. And, if the TableView offset reaches the bottom of the CollectionView's tableviewcell during a drag / pan, any additional dragging of the current table view drag / pan should effect the collection view instead of the table view.
Also, when the collection view is scrolling, if a user starts scrolling on the collection view, if the collection view reaches the top of it's scroll (Content Y offset of 0 or less), and additional scrolling of the current pan/drag gesture in affect should cause the containing table view to scroll up.
The reason I want to achieve this effect, is because the table view cell above the last cell containing the collection view, contains a UISegmentControl that toggles the contents of the UICollectionView, and I want the user to be able to toggle this segment at any time while scrolling in the CollectionView. Meaning the collection view has to scroll but the parent table view needs to not scroll..
I've tried playing with the gesture recognizers, and doing something with
– gestureRecognizer:shouldRecognizeSimultaneouslyWithGestureRecognizer:
This gets me halfway there, I can use a flag to return yes/no to this method if the collection view is to scroll into a negative offset (Past it's top offset) or if the table view has reached the end of it's total scroll.. I get sort of close to what I want to achieve, but if I scroll up slowly on the collection view, it doesn't fire the simultaneous recognizer, same happens if I scroll down on the table view too slowly.
Another issue is, I do NOT want the collection view to bounce. However setting bounces to NO totally prevents the simultaneous recognizer to fire at all. I even tried setting content offset to CGPointZero on the collection view in it's viewDidScroll if it's y offset were to dip below zero. This also doesn't work and prevents the simultaneous method from firing...
Does anyone have any idea what to do? Or something to point me in the right direction?
UPDATE -
Still trying at this, I've made little progress towards the behavior I'm trying to achieve. I've messed with toggling userInteractionEnabled in the viewDidScroll method, as have I tried in willBeginDragging. The same with scrollEnabled property.. No luck :( I get a behavior similar to what I want with this, however the parent view will not scroll up until the user lets off the screen and attempts to scroll again..
UPDATE -
Is there anyway to transition the panGestureRecognizer currently handling scroll events DURING scrolling? If I could transition the scroll handler from the child to the parent while still scrolling this would solve my issue. I've looked through apple's gesture related and uiscrollview related documentation and can't find anything close to doing that.
UPDATE -
Just got done trying something like this..
- (CGPoint)maxParentContentOffset
{
return CGPointMake(0, self.parentScrollView.contentSize.height - self.frame.size.height - 44);
}
- (void)parentScrollViewDidScroll:(UIScrollView *)parentScrollView
{
if (self.contentOffset.y > 0) {
self.parentScrollView.contentOffset = [self maxParentContentOffset];
}
}
- (void)scrollViewDidScroll:(UIScrollView *)scrollView
{
if (scrollView.contentOffset.y < 0) {
scrollView.contentOffset = CGPointZero;
}
}
- (void)scrollViewWillBeginDragging:(UIScrollView *)scrollView
{
CGPoint translation = [scrollView.panGestureRecognizer velocityInView:scrollView.superview];
if (translation.y < 0) {
[UIView animateWithDuration:0.5f animations:^(void) {
self.parentScrollView.contentOffset = [self maxParentContentOffset];
}];
}
}
- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer:(UIGestureRecognizer *)otherGestureRecognizer
{
return YES;
}
However there is a problem... for some reason I keep getting a bad access error on the following method
- (void)parentScrollViewDidScroll:(UIScrollView *)parentScrollView
{
if (self.contentOffset.y > 0) {
self.parentScrollView.contentOffset = [self maxParentContentOffset];
}
}
Specifically setting the content offset. Which is really strange, because with breakpoints I'm seeing parentScrollView and self as being set. I'm wondering if it's not a bad access but it's getting trapped in an infinite loop for some reason? Any ideas?
Even though you may manage to make it work now, embedding a collection view inside a table view (both UIScrollView subclasses) is not a good idea and it will bug as soon as apple modifies their implementation.
Try to migrate to a single UICollectionView layout. After all there's nothing you can't achieve with a collection view that a table view can.
Separate your "table view" and "collection view" in two (or more) collection view sections, then implement layoutAttributesForItemAtIndexPath: differently according to the indexPath.section.
To make it table view-like you'll want to return frames whose width are the same as the collection view.
If your layout is simpler then you could use a UICollectionViewFlowLayout (maybe your already are) and implement collectionView:layout:sizeForItemAtIndexPath: as described above.
Figured this out after a good 8 hours.. I had a confliction due to infinite setting of the parent scroll view offset, since I had multiple objects that were of the same class that received a call whenever their parent view scrolled, both trying to set the same parent view offset to zero, which caused the other class to see scroll changing, and calling their method to change offset, and the process happening infinitely causing a crash.
This code however, solved everything and functions exactly as I was desiring. Hopefully this helps anyone else in the future looking to get congruent scrolling between a parent and child scroll view.
- (CGPoint)maxParentContentOffset
{
return CGPointMake(0, self.parentScrollView.contentSize.height - self.frame.size.height - 44);
}
- (void)parentScrollViewDidScroll:(UIScrollView *)parentScrollView
{
if (self.contentOffset.y > 0 && self.isDragging) {
self.parentScrollView.contentOffset = [self maxParentContentOffset];
}
}
- (void)scrollViewDidScroll:(UIScrollView *)scrollView
{
if (scrollView.contentOffset.y < 0) {
scrollView.contentOffset = CGPointZero;
}
}
- (void)scrollViewWillBeginDragging:(UIScrollView *)scrollView
{
CGPoint translation = [scrollView.panGestureRecognizer velocityInView:scrollView.superview];
if (translation.y < 0) {
[UIView animateWithDuration:0.5f animations:^(void) {
self.parentScrollView.contentOffset = [self maxParentContentOffset];
}];
}
}
- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer:(UIGestureRecognizer *)otherGestureRecognizer
{
return YES;
}
In an application that I've worked, we needed something close to that, we wanted to have a uitableview inside the first cell of another uitableview, which should be scrollable (you can check the app here)
Our approach was quite different, and we thought about doing it your way, but that way was a bit overkill for the time we had, and needed too much custom control instead of using what apple already gives us.
I'll share our method just for you to have another way to solve your problem, since I can't figure out what is wrong in that method call.
On the outer tableview's datasource lifecycle, we were able to know how our inner table view would be, allowing us to feed our inner table view with all the data, which would then gave us the total content size of the inner table view.
With this info, and since we knew (and in your case, you know) the actual cell where the inner table view would be placed, we make that cell's height equal to the height of the inner tableview content size. With this, the inner table view is 'totally visible'(in your case, the collection view) inside the outer table view cell, but since the cell is so big, it looks like we are scrolling the inner table view when we are simply scrolling a really big, special, cell.
And it won't bounce, if you don't want it too.
In our case, this worked, and the implementation was pretty straight forward.
In your case, and since you have a UISegmentedController, you should do a beginUpdates endUpdates and a 'reloadData', upon press in the UISegmenedController, in your outer table view in order to be able to recalculate the collection view's content size and resize the last cell, but that is pretty straight forward.
I know I'm not answering your question, but this method allowed us to achieve something so similar in such a fast and straight forward way that I thought it was worth sharing.
Hope it helps.
There is a button at the bottom of my view controller. When the user scrolls down the button has to be attached to the scrollview at certain height.
I need to attach a button to the scrollview, immediately when the contentOffset.y reaches a particular value. -(void) scrollviewDidScroll doesn't help me as there might be a jump in contentOffset when the user is scrolling fast. Any leads on this are helpful.
Also, whenever I add a subview to the scrollview, -(void) viewDidLayoutSubviews is called. Which in turn sets the contentOffset to {0,0}. How can I achieve the functionality I need?
I needed to do the same thing with a UITableView and for me using scrollViewDidScroll worked.
I created a view called staticBar and added it as a subview of the tableView, but I had to rearrange the tableview subviews for it to appear in the right place. I don't have my code in front of me, but in -scrollViewDidScroll: it looked something like this:
- (void)scrollViewDidScroll:(UIScrollView*)scrollView
{
CGFloat staticBarAdjustedY = _staticBarY - scrollView.contentOffset.y;
CGFloat scrollViewYFloor = scrollView.frame.size.height - _staticBar.frame.size.height;
// This way maximum Y the view can have is at the base of the scrollView
CGFloat newY = MIN( staticBarAdjustedY, scrollViewYFloor);
_staticBar.frame = (CGRect){ { _staticBar.frame.origin.x, newY}, _staticBar.frame.size}
}
I will check my code later today and add more details here.
Also, you said the scrollviewDidScroll has jumps in contentOffset, but it's worth mentioning that these jumps are the same that the scrollView uses to scroll its own view. So it's not like you are "losing" frames on this delegate method.
Hope it helps.
PS: So, here is the rest of my code.
//I place my custom view as a subview of the tableView below it's last subview
//The last subview is for scroll indicators.
WTButtonsBar *buttonBar = [[WTButtonsBar alloc] init];
[self.tableView insertSubview:buttonBar belowSubview:self.tableView.subviews.lastObject];
In scrollViewDidScroll:
-(void)scrollViewDidScroll:(UIScrollView *)scrollView
{
//In my app I needed my view to stick to the top of the screen
//thats why I use MAX here
//self.buttonsBarOriginalY is the view's position in the scrollView when it isn't attached to the top.
CGFloat newY = MAX(scrollView.contentOffset.y, self.buttonsBarOriginalY)
[_buttonsBar setFrame:(CGRect){{0, newY}, _buttonsBar.frame.size}];
}
im atempting to do a facebook type load more data and right now it works, but very laggy on the device because its asking the server to get anything that isnt there already, then calling a scroll all the way down function (because somehow when i reload the data it scrolls to the top). If there would be a way to prevent scrolling to the top that would be great. But my main thing is, is there a way to detect when i scrolled down, and LET GO (stopped scrolling) as in i scrolled past what i have, then it went back to its possition and then calls my methods... Currently it keeps getting called when the scroll is greater then the height of the UITableView heres the code
-(void)scrollViewDidScroll:(UIScrollView *)scrollView
{
CGFloat height = scrollView.frame.size.height;
CGFloat contentYoffset = scrollView.contentOffset.y;
CGFloat distanceFromBottom = scrollView.contentSize.height - contentYoffset;
if(distanceFromBottom < height)
{
[getMessage removeAllObjects];
[self loadMessages];
[self.tableView reloadData];
[self scrollAllTheWayDown];
}
}
UIScrollViewDelegate method
- (void)scrollViewDidEndDragging:(UIScrollView *)scrollView willDecelerate:(BOOL)decelerate;
does what you want. it gets called after user stops scrolling, and you can check for scrollOffset at that point to see if you should trigger your refresh code. (you'd use scrollViewDidScroll to update the view to show user update will happen if he lets go)
I have created a UICollection with a custom layout to allow for scrolling both vertical and horizontal. It is a grid of equal sections and items in each section (ie 10 x 10, 20 x 20, etc). I would like to be able to put two headers that remain in view, one along the top and one along the left side. I have not found a way to do this within the UICollection itself. So, I set up UICollection along the left and another along the top. However, as the user scrolls the grid left and right and/or up and down, I want these two collections to mirror those movements.
So, my question is: Is there a way to mirror the horizontal movement of the main UICollection to the top UICollection and then mirror the vertical movement of the main UICollection to the side UICollection?
Thanks!
UICollectionView is a subclass of UIScrollView. It sends its delegate all of the messages defined in the UIScrollViewDelegate protocol.
The message you want to respond to is scrollViewDidScroll:. When your main collection view sends this message, you want to respond to it by getting its contentOffset and applying the offset to your margin collection views as appropriate.
// Implement this in your main collection view's delegate.
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
[self synchronizeCollectionViewContentOffsets];
}
- (void)synchronizeCollectionViewContentOffsets {
CGPoint offset = self.mainCollectionView.contentOffset;
self.leftMarginView.contentOffset = CGPointMake(0, offset.y);
self.topMarginView.contentOffset = CGPointMake(offset.x, 0);
}
So, I figured it out. Using self.mainCollectionView.contentOffset always returned (0,0), so tried to use the object name I actually assigned to it through the Storyboard and the view controller. This worked.
-(void)scrollViewDidScroll:(UIScrollView *)scrollView {
[self synchronizeCollectionViewContentOffsets];
}
-(void)synchronizeCollectionViewContentOffsets {
CGPoint offset = myCollectionView.contentOffset;
myLeftMargin.contentOffset = CGPointMake(0, offset.y);
myTopMargin.contentOffset = CGPointMake(offset.x, 0);
}
Where myCollectionView, myLeftMargin and myTopMargin are linked to the UICollectionViews through the Storyboard.
How can I force a UIScrollView in which paging and scrolling are on to only move horizontally left or horizontally both direction(left and right)?
To be clearer, I'd like to allow the user to 'page only horizontally backward(only bounce when the user try to scroll horizontally right)' OR 'horizontally both direction(this is normal action)' at a given moment.
I am wondering that the solution is the subclass of UIScrollView.
Thanks in advance.
- (void)scrollViewDidScroll:(UIScrollView *)scrollView {
if ( only bounce.. ){
// is it right?
if (scrollView.contentOffset.y > 60) {
[scrollView setContentOffset:CGPointMake(0, 60)];
}
}
if ( only paing left... ){
How to do this??
}
}
I'd implement the delegate function scrollViewDidScroll: and store the state (scroll state) of the ScrollView. On subsequent calls, compare with the previous state and have it bounce back (by calling ZoomToRect: maybe) if it is in a particular direction that you don't like.