I have a tab view controller with a navigation controller. In the first tab item I click on a button in a view that pops up a view with animated: YES.
Then when that view is done I hit another button that dismisses it. Like:
[self dismissViewControllerAnimated:NO completion:^{
ProfilesViewController *profile = [[ProfilesViewController alloc] init];
[self.navigationController pushViewController:profile animated:YES];
//SHOW YOUR NEW VIEW CONTROLLER HERE!
}];
But everytime this code runs, it dismisses the view, DOES NOT push the profiles controller, and shows the view from the first tab bar item.
How do I push the ProfilesViewController to the screen with a Back arrow?
If you are using dismissViewControllerAnimated to dismiss that means that the VC is presented modally. As such, it doesn't have a navigation controller (so self.navigationController is nil) and thus it can't push anything into the navigation controller.
You should really add a property to the controller which is a delegate or a completion block which can be used to push the controller from another controller (the one that presents it) to dismiss and push the controller.
A second option is to pass the navigation controller, it's a similar amount of code to using a block but not so good.
A crappy option is to use the parentViewController to find the appropriate navigation controller, but that sucks for many reasons.
Related
There is problem in view hierarchy. Here is flow of my app.
When app starts View Controller "A" is Visible. After that storyboard "B" is loaded through "StoryBoard Reference (Push)" ,Where another navigation controller is present and Home screen is loaded. On Click of Menu button in Home screen Side panel is visible.
Now When i click on side panel menu items view Controller "B" is pushed. This View Controller is Pushed Under Home screen and is not Vsible.
Help View contoller is visible under Home controller. I want Help View Controller should come on top of Home controller.
I dont understand what issue is coming..
Any Help will be appreciated..
If you are pushing view controller from side panel shows in image, will never push because it is not in navigation controller.
the answer depends on how you showing your side menu but from assumptions
what you need to do is to set root view controller or keep reference of navigation controller and push from there
If you are presenting side menu then it is not on navigation controller so you should first dismiss this side menu and on the completion of it you should push new view controller (says B or Help). I am writing my code snippet that i am using in my project for demonstration,
- (IBAction)settingClick:(id)sender {
SettingViewController *svc = [self.storyboard instantiateViewControllerWithIdentifier:#"settingsScreen"];
[self dismissViewControllerAnimated:NO completion:^{
[self.vc.navigationController.navigationController pushViewController:svc animated:YES];
}];
}
Above method push setting view controller on current navigation controller after dismissing side menu
Now important thing is self.vc this is the object of previous viewcontroller (Home controller in your case i think) on which side menu was presented.
So my SideMenuViewController has a property like,
#property (nonatomic,strong) UIViewController *vc;
which i am setting with self from previous view controller (in your case from Home view controller) something like,
SideMenuViewController *smvc = [self.storyboard instantiateViewControllerWithIdentifier:#"sideMenu"];
smvc.modalPresentationStyle = UIModalPresentationOverCurrentContext;
[self presentViewController:smvc animated:NO completion:^{
smvc.vc = self;
}];
And i have used [self.vc.navigationController.navigationController pushViewController:svc animated:YES]; i.e. two navigation controller to push because i have two navigation controller in my view hierarchy to push this new view controller.
You can manage that as per your setup that how many navigation controller you have !!
Hope this will help :)
After digging a lot, I found solution for this.
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"Home" bundle: nil];
RootController *someViewController = [storyboard instantiateViewControllerWithIdentifier:#"RootController"];
[self.navigationController pushViewController:someViewController animated:YES];
I have set another navigation controller as root ViewController of the window and it worked for me.
Thanks.
I have a presenting view controller that presents a modal like VC, then when the user is done with that modal, I want to transition to another modal, but calling:
// we are done.
[self.presentingViewController dismissViewControllerAnimated:NO completion:nil];
if (self.showOtherContoller)
{
UIViewController* aVC = [[UIViewController alloc] initWithNibName:#"someNib" bundle:nil];
[self.presentingViewController aVC animated:NO completion:nil];
}
works, but the presenting base view controller shows for about a second, so it looks all flashy.
Basically I want to replace one view controller with another, not temporarily drop to the presenting view controller.
Thanks for any tips.
Your modal transition style is CoverVertical. The first modal slides back down when dismissed, exposing its presentingViewController, then the second modal slides up, hiding the presentingViewController.
You want to change the transition so it appears that the first modal is replaced by the second modal.
Change both view controllers' modal transition styles to CrossDissolve before dismissing the first and presenting the second. Before dismissing the second, change it to CoverVertical, so it slides down to match the first modal's slide up transition.
WLINewPostViewController *newPostViewController = [[WLINewPostViewController alloc] initWithNibName:#"WLINewPostViewController" bundle:nil];
UINavigationController *newPostNavigationController = [[UINavigationController alloc] initWithRootViewController:newPostViewController];
newPostNavigationController.navigationBar.translucent = NO;
[tabBarController presentViewController:newPostNavigationController animated:YES completion:nil];
So I just simply push a new UIViewController.
Then after it posts the server callback calls a method with this code from the WLINewPostViewController.m:
[self dismissViewControllerAnimated:YES completion:^{
NSLog(#"Completed");
}];
[[self navigationController] popViewControllerAnimated:YES];
if (self == self.navigationController.visibleViewController){
NSLog(#"self = visibile");
}
if (self == self.presentingViewController.presentingViewController){
NSLog(#"self = presenting");
}
}
I tried a bunch of different things and none work.
I am relatively new to Xcode but after trying
[self dismissViewControllerAnimated:YES completion]
[self.navigationController popViewControllerAnimated:YES]
[self.navigationController.visibleViewController.presentedViewController dismissViewControllerAnimated:YES completion:nil];
[self.navigationController dismissViewControllerAnimated:YES completion:nil];
and every other possibility, I am officially stumped. The WLINewPostViewController still won't dismiss.
It Logs out "self = visible"
Let me illustrate what you are trying to do
You have a navigation controller with Controller A.
Here you are trying to present another Controller B from Controller A.
Now when you get a callback from the server, you should call dismissViewControllerAnimated from Controller B to dismiss itself.
So after dismissViewControllerAnimated:completion: method call, the Controller B will be dismissed and Controller A will be shown automatically. Now you do not need to call popViewControllerAnimated: in completion block again as there is no other Controller in navigation controller to load.
If you have different use case, let me know I can provide solution.
You are presenting a view over navigationbar instead of pushing it over navigationbar.
When push you pop. When you present you dismiss. So instead of popViewControllerAnimated you need to use dismissViewControllerAnimated:completion
dismiss behaves differently depending on the receiver. From the docs:
The presenting view controller is responsible for dismissing the view controller it presented. If you call this method on the presented view controller itself, it automatically forwards the message to the presenting view controller.
If you present several view controllers in succession, thus building a stack of presented view controllers, calling this method on a view controller lower in the stack dismisses its immediate child view controller and all view controllers above that child on the stack. When this happens, only the top-most view is dismissed in an animated fashion; any intermediate view controllers are simply removed from the stack. The top-most view is dismissed using its modal transition style, which may differ from the styles used by other view controllers lower in the stack.
In short, if the vc on top calls it on itself, it dismisses itself. Anywhere else on the stack dismisses to that point, animating only the topmost vc.
What's extra confusing (for you and many others) is that the navigation vc has a stack too, and your problem is complicated further by presenting an navigation vc atop a tab-bar vc.
So what to do? The question is unclear about which vc is the receiver in the posted code (who is self in that snippet?). The text implies that self is a vc on the stack of the presented navigation vc, like...
TabBarVC --- presents ---> NavVC
| |
| --- viewControllers stack = rootVC, vc1
|
---> viewControllers for each tab
... and it's root or vc1 that wants to dismiss. If I'm right about that, then, given the docs, the solution is clear:
[self.navigationController dismissViewControllerAnimated:YES completion:^{}];
will put us back on the tabbar vc on whatever tab was visible when we did the present.
I have a view controller (which is the root view of the main UINavigationController for my app) that is presenting another view controller hierarchy modally, by presenting a UINavigationController. After the user interacts with the root view controller in the modal NavController, a detail VC is pushed onto the modal NavController's stack. After some interaction with this detail VC, I'd like to push this detail VC back onto the original hierarchy, and dismiss the modal NavController/it's root view controller, all without the user seeing the change in this hierarchy. Right now I have something like this:
In MyViewController1 (root of the main NavController hierarchy):
UINavigationController *newModalNavController = [[UINavigationController alloc]
initWithRootViewController:someRootViewController];
[self presentViewController:newModalNavController animated:YES completion:nil];
Then in the someRootViewController above, after some interaction (e.g. a button click), I push the detail view controller onto the modal hierarchy:
[self.navigationController pushViewController:detailVC animated:YES];
Finally, in the detailVC, after some more interaction:
UINavigationController *mainNavController = /* Get main nav controller here (i.e. non-modal one) */
// Dismisses the modal view hierarchy (detailVC gets -(void)viewDidDisappear)
[self.presentingViewController dismissViewControllerAnimated:NO completion:nil];
// Repush the detailVC back onto the main hierarchy (detailVC gets -(void)viewDidAppear)
[mainNavController pushViewController:self animated:NO];
// Keyboard was on screen before interaction; make it stay on screen after pushing
// detailVC onto main nav hierarchy
[self.textView becomeFirstResponder];
This all works (clicking back on the detailVC's navigationItem after pushing it onto the mainNavController's hierarchy goes back to the original rootViewController, MyViewController1), except when the keyboard is on screen in the detail view controller as it is being switched, it gets hidden and then animates back up, instead of just staying on screen (because the view is disappearing for a second as the presentingViewController dismisses the modal nav controller, whose hierarchy the detailVC is a part of, and then reappears as it gets pushed onto the mainNavController's stack, and the textView grabs first responder again).
Is there a better way to change which navigation hierarchy the detail view controller is a part of, possibly one that doesn't involve the view disappearing, and thus the keyboard being hidden and immediately reshown?
I'm trying to use a popover as an intermediary menu between my main view and a modal view controller. I can successfully present the Modal view controller from the popover by using the following code:
UIStoryboard *storyboardiPad = [UIStoryboard storyboardWithName:#"MainStoryboard_iPad" bundle:nil];
cbwEditControlPanel *editCP = [storyboardiPad instantiateViewControllerWithIdentifier:#"EditCP"];
UINavigationController *nav = [[UINavigationController alloc] initWithRootViewController:editCP];
[nav setToolbarHidden:NO];
[nav setModalPresentationStyle:UIModalPresentationFullScreen];
[nav setModalTransitionStyle:UIModalTransitionStyleCoverVertical];
[self presentViewController:nav animated:YES completion:nil];
self.modalInPopover = NO;
The problem I'm running into is that when the EditCP modal view controller is dismissed, the main view controller never updates. I have a pagecontroller on the main view that should be updated to reflect the number of pages as set in the EditCP modal view controller, but for some reason the modal view controller being called from the popover prevents the main view controller from updating the pagecontroller. I've even tried calling the main view's "View Will Appear" method from the popover or modal view when they are dismissed, but even if the 'viewWillAppear' method is called the pageController will not update!
Any ideas what is preventing the pageController from updating? I even passed a reference to the pagecontroller to the modal view and tried to update it there, but it seems that from the time the popover is presented until it is dismissed, I cannot update the number of pages on the PageController.
Thank you!
So this is an old question but I also came across a similar problem recently when using a popover. My solution was to use an unwind segue to trigger my parent view to perform some action. In my case my parent view contains contact information and the popover contains a list of cites. All I wanted to do was to have the parent view update with the new city once the user selected it from the popover. So in my parent view I create my unwind function as follows:
In the .h:
- (IBAction)unwindToContactTVC:(UIStoryboardSegue *)unwindSegue;
In the .m:
- (IBAction)unwindToContactTVC:(UIStoryboardSegue *)unwindSegue
{
[self updateTableForOffice];
}
In the above .m file is where you would have the logic to do whatever it is you want to in the parent view. To connect this unwind segue go to the child view in the storyboard and control drag from the view icon to the exit icon. You should see a pop up with the name of your unwind segue.
Finally, give that unwind segue a name and then in the child controller in the viewWillDisappear() function call the segue as follows:
- (void)viewWillDisappear:(BOOL)animated
{
[self performSegueWithIdentifier:#"unwind-to-contact-tvc" sender:self];
}
I hope that helps. If someone has a better solution let me know.
Well, I half solved the problem. The only way to get an update function when the popover disappeared was to stop using Storyboards and programmatically present the popover, using the main view as the delegate. I then was able to update correctly inside the popoverControllerDidDismissPopover method.
However, I am still interested in finding a way to update the pageControl when the modal is dismissed, before the popover is dismissed.