I'm using Pimoroni Rainbow-Hat Raspberry pi3 kit. I have loaded android things image on sdcard. I have power cable and ethernet cable connected.
I can see Android things boot screen on display but i don't see the IP.
When i try to connect with adb connect Android.local it's not working(getting unknow host). I tried the ethernet cable from pi3 ethernet port to laptop , i can see the lan ip when i do ipconfig /all but when i try adb connect <-ip-:5555, still connection gets refused. but am able ping to the ip.
I am using Windows 7 OS.
Tried turning off IP v6, Windows Firewall, rebooting host etc, still not able to connect.
My main problem is getting the Aot device recognised on the host and load the app onto it.
I'm aware but haven't tried usb to ttl serial cable option mentioned here
I'm familiar with Android but new to iot/Aot , any help about where i am going wrong would be appreciated.
When i try to connect with adb connect Android.local it's not working(getting unknow host).
I tried the ethernet cable from pi3 ethernet port to laptop
The Raspberry Pi is a computer in its own right.
You need to connect the ethernet cable from the Pi3 to your router aka to the local network (not into your computer directly)
The follow the steps from the docs here and setup wifi to avoid further cable issues.
I want to make a tool for cmd where you specify a password and said and it connects you to the WiFi network. I am aware of the netsh wlan connect command but it use saved wifis
Thanks in advance
-Rob
*edit
Found it was too hard with cmd so I opened up to any other language, any help is appreciated.
*edit2
Found it can be done in batch by writing a custom XML file with the key and ssid, then importing the ssid with the command netsh wlan add profile <path to xml>. Then connect to the imported XML with netsh wlan connect (xml name)
I don't want to answer this officially because I might be wrong
I have created a virtual Wi-Fi adapter by command
netsh wlan set hostednetwork mode=allow ssid=MyHotspot key=MyPassword
netsh wlan start hostednetwrok
Everything works fine. I just want to ask if there exists a command for monitoring the traffics of this network? I mean I connect by my mobile to this network and I want to get a name of a device that is connected.
this can show you the number of devices connected, you need a third party tool to find names of devices:
netsh wlan show hostednetwork
The command can be :
echo connected devices
When I make wifi hot spot through Virtual router on laptop, Its work fine but when I go through my Desktop it syas "Group & resources are not in correct state". I using n 150 micro adapter in my destop PC. Does Virtual router not support to external wifi adapter. Please help me to solve this.
Open an elevated Command Prompt window
Run:
netsh wlan set hostednetwork mode=allow
C:\Windows\system32>netsh wlan show drivers
Interface name: Wireless Network Connection
Driver : DW1501 Wireless-N WLAN Half-Mini Card
Vendor : Broadcom
Provider : Broadcom
Date : 21/01/2010
Version : 5.60.48.35
INF file : C:\Windows\INF\oem26.inf
Files : 5 total
C:\Windows\system32\DRIVERS\BCMWL6.SYS
C:\Windows\system32\bcmihvsrv.dll
C:\Windows\system32\bcmihvui.dll
C:\Windows\system32\drivers\vwifibus.sys
C:\Windows\system32\bcmwlcoi.dll
Type : Native Wi-Fi Driver
Radio types supported : 802.11n 802.11g 802.11b
FIPS 140-2 mode supported : Yes
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
Open WEP
Shared None
Shared WEP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
WPA2-Enterprise CCMP
WPA2-Personal CCMP
WPA2-Enterprise Vendor defined
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
Vendor defined Vendor defined
Vendor defined TKIP
Vendor defined CCMP
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA-Enterprise CCMP
WPA-Personal CCMP
Authentication and cipher supported in ad-hoc mode:
WPA2-Personal CCMP
Open None
Open WEP
IHV service present : Yes
IHV adapter OUI : [00 10 18], type: [00]
IHV extensibility DLL path: C:\Windows\System32\bcmihvsrv.dll
IHV UI extensibility ClSID: {aaa6dee9-31b9-4f18-ab39-82ef9b06eb73}
IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000}
I disabled and re-enabled it many times. Still no clue whats goin wrong I always get the error saying
"C:\Windows\system32>netsh wlan start hostednetwork
The hosted network couldn't be started.
A device attached to the system is not functioning."
The commands before that are running perfectly. The virtual adapter and everything is also enabled.
netsh wlan show hostednetwork
C:\Windows\system32> netsh wlan show hostednetwork
Hosted network settings
Mode : Allowed
SSID name : "Lathiyas"
Max number of clients : 100
Authentication : WPA2-Personal
Cipher : CCMP
Hosted network status
Status : Not started
Then tried stopping the hostednetwork and tried again still the same error. I think there is some problem with the drivers. Dell N5010 Windows 7-32bit system. Please help.
First of all go to the device manager now go to View>>select Show hidden devices....Then go to network adapters and find out Microsoft Hosted network Virual Adapter ....Press right click and enable the option....
Then go to command prompt with administrative privileges and enter the following commands:
netsh wlan set hostednetwork mode=allow
netsh wlan start hostednetwork
Your Hostednetwork will work without any problems.
At first simply uninstall wifi drivers and softwares
just keep wifi drivers
+
from device manager....network adapters...remove all virtual connections
then
Press the Windows + R key combination to bring up a run box, type ncpa.cpl and hit enter.
netsh wlan set hostednetwork mode=allow ssid=”How-To Geek” key=”Pa$$w0rd”
netsh wlan start hostednetwork
netsh wlan show hostednetwork
its working for me and on others PC.
Same issue.
I solved the problem first activating (right click mouse and select activate) from control panel (network connections) and later changing to set mode to allow (by netsh command), to finally starting the hostednetwork with other netsh command, that is:
1.- Activate (Network Connections) by right click
2.- netsh wlan set hostednetwork mode=allow
3.- netsh wlan start hosted network
Good luck mate !!!
If none of the above solution worked for you, locate the Wifi adapter from "Control Panel\Network and Internet\Network Connections", right click on it, and select "Diagnose", then follow the given instructions on the screen. It worked for me.
netsh wlan set hostednetwork mode=allow ssid=dhiraj key=7870049877
If you have a wifi button or switch on your laptop make sure it is turned on! Then use the netsh commands that other people have stated
This was a real issue for me, and quite a sneaky problem to try and remedy...
The problem I had was that a module that was installed on my WiFi adapter was conflicting with the Microsoft Virtual Adapter (or whatever it's actually called).
To fix it:
Hold the Windows Key + Push R
Type: ncpa.cpl in to the box, and hit OK.
Identify the network adapter you want to use for the hostednetwork, right-click it, and select Properties.
You'll see a big box in the middle of the properties window, under the heading The connection uses the following items:. Look down the list for anything that seems out of the ordinary, and uncheck it. Hit OK.
Try running the netsh wlan start hostednetwork command again.
Repeat steps 4 and 5 as necessary.
In my case my adapter was running a module called SoftEther Lightweight Network Protocol, which I believe is used to help connect to VPN Gate VPN servers via the SoftEther software.
If literally nothing else works, then I'd suspect something similar to the problem I encountered, namely that a module on your network adapter is interfering with the hostednetwork aspect of your driver.