During the Acumatica ERP Import Scenario (ScreenId=SM206036) process, I am getting a "CS Error #33: Cannot generate the next number for the sequence because it is expired. CS Error #33: Cannot generate the next number for the sequence because it is expired.”
Has anyone seen this error before?
I think that you have a numbering sequence is not configured for the screen where you import data to.
Simplest way to validate it is to open the screen itself and try to enter the data manually.
For which screen do you want to make import? You should check numbering sequence settings for that screen. Looks like generating new id's for that screen doesn't fit to rules of date.
I think the last number maybe reach to the maximum value in the setting! Please review it setting and check with Mike suggestion!
Related
I'm having some issues isolating errors in my 837. The system that's interpreting my 837 is giving me a segment where the error is found, but since I have so many claims (and therefore segments), I can't just count the segments until I get to the one I need.
Is there some way of finding a specific segment line? I know the general area the segment line is in (based on the an account number the error is listed under), but I have no way of knowing which of the segments has the errors.
Here's an example of what I mean. There's revenue codes listed after the SV2, then a corresponding code, then the cost of that code.
SV2*0450*HC:96368*100.00*UN*1~
DTP*472*D8*20171204~
LX*13~
SV2*0450*HC:96371*700.00*UN*5~
DTP*472*D8*20171204~
LX*14~
SV2*0450*HC:96372*50.00*UN*1~
DTP*472*D8*20171204~
LX*15~
Thanks.
Please take a look at X12 Parser
loop.getLoop("2400", 0).getSegment("SV1").getElementValue("SV101")
can get you the value needed.
For more examples look at X12ReaderTest
Team,
Could you please help on the advise.
I want to know how to calculate the line of code for my TFS project collection. I need for entire instance to calculate the line of code.
Please advise. Thank you
Note: I'm assuming you're using TFVC, not Git.
You should be able to get this from the data warehouse (Tfs_Warehouse) assuming you have Reporting Services configured.
There is a Code Churn table. I believe you should be able to sum the NetLinesAdded field to get the total number of lines of code.
The Analysis Cube has a Total Lines field, as well.
However, you can also get this information from your file system with PowerShell, for example:
(gci -Path 'C:\Users\Daniel\Source\Repos\' -rec -Include '*.cs' | select-string .).Count
This comes with the caveat that "lines of code" is, in almost every single case, a totally meaningless, worthless number.
I need to use maxima software to deal with data. I try to read data from a text file constructed as
1 2 3
11 22 33
ect.
Following comands allow for loading data sufficiently.
load(numericalio);
read_matrix("path to the file");
The problem arises when I apply them to a more realistic (larger) data set. In this case the message appears Expression longer than allowed by the configuration setting.
How to overcome this problem? I cannot see any option in configuration menu. I would be grateful for advice.
I ran into the same error message today, at it seems to be related to the size of the output that wxMaxima receives from the Maxima executable.
If you wish to display the output regardless, you can change it in the configuration here:
Edit>Configure>Worksheet>Show long expressions
Note that showing a massive expression or amount of data may dramatically slow the program down, so consider hiding the output (use a $ instead of a ; at the end of your lines) if you don't need to visualize the data.
I know that attachments can be short:true or short:false, but it seems to me that even when they're short:false there is still a maximum length which is shorter than the regular length of a message.
Can this be controlled?
Thanks.
I know this is an old question, but it was high on my GOOG results today, so thought I'd post my solution here.
Short version - I stopped using attachments and put everything in the text.
Long version - my use case was using the color-bar on attachments to display info/warn/error info, but ultimately the line-wrap was making it less useful. The alternative is to set the sender name and icon_emoji to indicate that info, and simply put the log data in the text. For my case, we don't have log data longer than the 4k limit, or else I'd use a files.upload approach to get text snippets.
Hope this helps!
You mean character width? This seems to be 78 characters (80 less 2 characters for the coloured bar?)
Unfortunately no, you do not seem to be able to change the width (at time of writing). You can resort to text which is full width.
short is for side by side fields only, not the entire attachment.
Also see Slack Attachment Width and Wrapping Issues
Nevrona Designs' Rave Reports is a Report Engine for use by Embarcadero's Delphi IDE.
This is what I call the Rave Endless Loop bug. In Rave Reports
version 6.5.0 (VCL10) that comes bundled with Delphi 2006, there is a
nortorious bug that plagues many Rave report developers. If you have a
non-empty dataset, and the data rows for this dataset fit exactly into a
page (that is to say there are zero widow rows), then upon PrintPreview,
Rave will get stuck in an infinite loop generating pages.
This problem has been previously reported in this newsgroup under the
following headings:
"error: generating infinite pages"; Hugo Hiram 20/9/2006 8:44PM
"Rave loop bug. Please help"; Tomas Lazar 11/07/2006 7:35PM
"Loop on full page of data?"; Tony Chistiansen 23/12/2004 3:41PM
reply to (3) by another complainant; Oliver Piche
"Endless lopp print bug"; Richso 9/11/2004 4:44PM
In each of these postings, there was no response from Nevrona, and no
solution was reported.
Possibly, the problem has also been reported on an allied newsgroup
(nevrona.public.rave.reports.general), to wit:
6. "Continuously generating report"; Jobard 20/11/2005
Although it is not clear to me if (6) is the Rave Endless loop bug or
another problem. This posting did get a reply from Nevrona, but it was
more in relation to multiple regions ("There is a problem when using
multiple regions that go over a page-break.") than the problem of zero
widows.
This is more of a work-around than a true solution. I first posted this work-around on the Nevrona newsgroup (Group=nevrona.public.rave.developer.delphi.rave; Subject="Are you suffering from the Rave Endless Loop bug?: Work-around announced."; Date=13/11/2006 7:06 PM)
So here is my solution. It is more of a work-around than a good
long-term solution, and I hope that Nevrona will give this issue some
serious attention in the near future.
Given your particular report layout, count the maximum number of rows
per page. Let us say that this is 40.
Set up a counter to count the rows within the page (as opposed to rows within the whole report). You could do this either by event script or by a CalcTotal component.
Define an OnBeforePrint scripted event handler for the main data band.
In this event handler set the FinishNewPage property of the main data band to be True when the row-per-page count is one or two below the max (in our example, this would be 38). And set it to False in all other cases. The effect of this is to give every page a non-zero number of widows (in this case 1..38), thus avoiding the condition that gives rise to the Rave Endless loop problem.
Thanks so much for this Sean - unfortunately this wouldn't work for me but I came up with another solution...
You see I have a memo at the top of the region that might expand or contract depending on how many notes the user has left in the database. This means that the number of rows that can fit on a page varies.
However. there is another solution - you use the MaxHeightLeft property of a databand.
All you do is measure the height of your databand, multiply it by 2, and put this in your MaxHeightLeft property. This will force 1 or 2 records onto the next page if it fills up that much.
thank's a lot, this thread helps me out from my problem with endless printing loop in Nevrona Rave...., I set MinHeightLeft to 0,500, this setting is work but i'm not sure that it will work for anothers result set of my query report.
Master,
The solution is MinHeightLeft to 0,500 , i use property wastefit area in true and generated the loop in the second print, but when changed the property MinHeightLeft to 0,500 the error disapear.
Thanks !
Atte
Fabiola Herrera.
Fabi_ucv#hotmail.com