Load UIView form in different modes - ios

I have 2 different UIViewController setup already. There is a UIBarButtonItem on the parent view and when user clicks on it, it's suppose to load a form (2nd UIView).
But on the UIBarButtonItem, I have a popover view. So When they click on the button, popover shows with 6 different UIButton and when they select one, the form loads. Please take a look at the following image to see what I'm talking about.
http://oi58.tinypic.com/f0cbae.jpg
This is because form is different for those 6 different UIButton.
How can I load same form in different mode?
If Button1 is clicked, how would the form know which mode was selected?
I figured I would need parameters for class but couldn't make it work.
============
EDIT:
This is what I tried:
public partial class AddAbsence_iPhone : UIViewController {
public void absenceTypeSelection (string mode) {
if (mode == “Button1”) {
this.lbl_AbsenceType.Text = “Button1”;
} else if (currentAbsenceType == "Button2”) {
this.lbl_AbsenceType.Text = "Button2";
} else if (currentAbsenceType == "Button3”) {
this.lbl_AbsenceType.Text = "Button3”;
} else if (currentAbsenceType == "Button4”) {
this.lbl_AbsenceType.Text = "Button4”;
} else if (currentAbsenceType == "Button5”) {
this.lbl_AbsenceType.Text = "Button5”;
} else if (currentAbsenceType == "Button6”) {
this.lbl_AbsenceType.Text = "Button6;
}
}
}
and this is how I am adding event to one of the buttons.
public partial class Absensehome_iPhone : UIViewController {
AddAbsence_iPhone addAbsence;
public override void ViewDidLoad () {
button2.TouchUpInside += (sender, e) => {
this.addAbsence = new AddAbsence_iPhone(this);
this.NavigationController.PushViewController(addAbsence,true);
addAbsence.absenceTypeSelection("Button2");
};
}
}
Absencehome_iPhone is the parent view controller.
AddAbsence_iPhone is the form, which I want to show once the button is clicked
When I run this, I get the following error:
Object reference not set to an instance of an object

If you are presenting from a UIPopoverController, you must have a UIViewController subclass. I'm assuming that same class is where you are listening for button taps. With a UIButton, that would be done by registering a listener using:
- (void)addTarget:(id)target action:(SEL)action forControlEvents:(UIControlEvents)controlEvents
So, you could register a different method for each button in that list.
- (void)viewDidLoad
{
[self.button1 addTarget:self action:#selector(button1Tapped:) forControlEvents:UIControlEventTouchUpInside];
[self.button2 addTarget:self action:#selector(button2Tapped:) forControlEvents:UIControlEventTouchUpInside];
}
If you were generating those buttons programmatically, or there were some other good reason why you couldn't control your flow by registering different handlers, you could register one handler for all the buttons, and check the text of the button that was tapped and passed as the 'sender' parameter:
- (void)viewDidLoad
{
[self.button1 addTarget:self action:#selector(aButtonTapped:) forControlEvents:UIControlEventTouchUpInside];
[self.button2 addTarget:self action:#selector(aButtonTapped:) forControlEvents:UIControlEventTouchUpInside];
}
- (IBAction)aButtonTapped:(id)sender
{
if ([sender isKindOfClass:UIButton.class])
{
UIButton* buttonTapped = (UIButton*)sender;
if ([buttonTapped.titleLabel.text isEqualToString:#"Button1"])
{
[self button1Tapped];
}
else if ([buttonTapped.titleLabel.text isEqualToString:#"Button2"])
{
[self button2Tapped];
}
}
}

Related

JSQMessageViewController customize send button

I'm building an messaging app, I use JSQMessageViewController to render messages and it's awesome.
Now I have a little problem trying to customize the send button:
Basically I want to replace left and right BarButtonItem to customized button with images.
After some hours of reading and searching, I got this far now:
button without text
button with text
As shown in the pictures, the voice button which is replacing the original send button is disabled if there is no text in the textField, this behavior is not what I want. How do I disable this behavior and make the button available all the time?
And this is how I customize the send button:
UIButton *rightButton = [UIButton buttonWithType:UIButtonTypeCustom];
[rightButton setBackgroundImage:[UIImage imageNamed:#"AudioButton#2x.png"] forState:UIControlStateNormal];
self.inputToolbar.contentView.rightBarButtonItem = rightButton;
if you want button available all the time,
Find This method in "JSQMessagesInputToolbar.h" And Comment These lines in OLD Code
- (void)toggleSendButtonEnabled
{
BOOL hasText = [self.contentView.textView hasText];
// if (self.sendButtonOnRight) {
// self.contentView.rightBarButtonItem.enabled = hasText;
// }
// else {
// self.contentView.leftBarButtonItem.enabled = hasText;
// }
}
in New JSQ Code
- (void)updateSendButtonEnabledState
{
if (!self.enablesSendButtonAutomatically) {
return;
}
BOOL enabled = [self.contentView.textView hasText];
// switch (self.sendButtonLocation) {
// case JSQMessagesInputSendButtonLocationRight:
// self.contentView.rightBarButtonItem.enabled = enabled;
// break;
// case JSQMessagesInputSendButtonLocationLeft:
// self.contentView.leftBarButtonItem.enabled = enabled;
// break;
// default:
// break;
// }
}
this will work if you are replacing your custom button in rightBarButtonItem
add this in viewDidAppear
[self.inputToolbar.contentView.rightBarButtonItem setEnabled:YES];
and override textview delegate
-(void)textViewDidChange:(UITextView *)textView;

How to use sender attributes in Objective-C

I'm using two buttons to do the same action. How can I identify which button was pressed using the "sender" from my IBAction function? (each button has a different Tag)
Here is what I want to do:
- (IBAction)addItemInParent:(id)sender {
NSInteger choice = sender.tag;
}
I hope this question makes sense!
- (IBAction)addItemInParent:(id)sender
{
UIButton *buttonPressed = (UIButton *)sender;
if (buttonPressed.tag == 123)
{
//button with tag 123 was pressed
}else if (buttonPressed.tag == 124
{
//button with tag 124 was pressed
}
}
Just replace my 123 and 124 with what the button tags actually are.
If you are confident that this method is only invoked by a button press, then you can rewrite your method to this one:
- (IBAction)addItemInParent:(UIButton *)sender {
NSInteger choice = sender.tag;
}
If not, check for the class of the sender:
- (IBAction)addItemInParent:(id)sender {
if ([sender isKindOfClass:[UIButton class]]) {
UIButton *button = (UIButton *)sender;
NSInteger choice = button.tag;
}
else {
// handle other cases
}
}
Change id to UIButton like so:
- (IBAction)addItemInParent:(UIButton *)sender {
NSInteger choice = sender.tag;
}
After casting sender to UIButton, did you try:
if (choice == 101)
{
// button whatever was pressed
}
else
{
// the other button was pressed
}
Obviously you should use the tags you assigned to the buttons.
You need to
1) check if the id object is a actually UIView class or subclass
2) typecast the id object to UIView
3) check the tag
4) decide what next based on the tag
if ([sender isKindOfClass:([UIView class])])
{
NSInteger tag = ((UIView *)sender).tag;
if (tag == <tag of button 1>)
{
//do something
}
else if (tag == <tag of button 2>)
{
//do something else
}
}
You need to typecast because id can be any type of object and you must make sure that it is actually an instance of UIView class or subclass to be able to access the tag, as only UIView classes and subclasses have a tag property.

Deselect all UIButtons when one is selected

I have eight (8) UIButtons setup in my game. When one is selected it shows that it is selected and if you click it again it will show as unselected. However, I want to make it so that when you select a button and any of the other seven (7) are selected, they become unselected.
I know how to do this through the use of [buttonName setSelected:NO] but the problem is I can't pass buttonOne to buttonTwo if buttonTwo has already been passed to buttonOne because I have already imported buttonTwo's header file in buttonOne. It throws a parse error if I have both headers importing each other. I've been stuck on this for a while now and was hoping that someone might have a solution to my problem.
Thanks for any help.
Get the parent view of the current button and iterate through all the buttons inside, unselecting all of them. Then, select the current one.
// Unselect all the buttons in the parent view
for (UIView *button in currentButton.superview.subviews) {
if ([button isKindOfClass:[UIButton class]]) {
[(UIButton *)button setSelected:NO];
}
}
// Set the current button as the only selected one
[currentButton setSelected:YES];
Note: As suggested on the comments, you could keep an array of buttons and go over it the same way the above code does with the subviews of the parent view. This will improve the performance of your code in case the view containing the buttons has many other subviews inside.
I know its too late to answer this question but I did it in only small lines of code . Here is what i did :
NSArray *arrView = self.view.subviews;
for (UIButton *button in arrView) {
if ([button isKindOfClass:[UIButton class]]) {
[((UIButton *) button) setTitleColor:[UIColor whiteColor] forState:UIControlStateNormal];
}
}
[button1 setTitleColor:[UIColor orangeColor] forState:UIControlStateNormal];
Simple way to do.
-(void)buttonSelected:(id)sender{
UIButton *currentButton = (UIButton *)sender;
for(UIView *view in self.view.subviews){
if([view isKindOfClass:[UIButton class]]){
UIButton *btn = (UIButton *)view;
[btn setSelected:NO];
}
}
[currentButton setSelected:YES];
}
I actually created an answer by reading all of your guys input, which I thank you greatly for. The tag property of the UIButton class was unknown to me before this post.
I created own subclass of UIButton, let's call it CustomUIButton.m. I created a NSMutableArray property for use when storing the buttons, which I'll call customButtonArray.
When I created the button, I set the tag property, and added the button to a local array on the parent view controller. After all buttons I wanted were created, I set the customButtonArray, like so:
// Initialize buttonHolderArray
NSMutableArray *buttonHolderArray = [[NSMutableArray alloc] init];
// Create a button
CustomUIButton *newButton = [[CustomUIButton alloc] initWithFrame:CGRectMake(10, 10, 50, 30)];
newButton.tag = 1;
[newButton setImage:[UIImage imageNamed:#"newButtonUnselected" forControlState:UIControlStateNormal]];
[buttonHolderArray addObject:newButton];
// Create additional buttons and add to buttonHolderArray...
// using different numbers for their tags (i.e. 2, 3, 4, etc)
// Set customButtonArray property by iterating through buttonHolderArray
NSInteger buttonCount = [buttonHolderArray count];
for (int i = 0; i < buttonCount; i++)
{
[[buttonHolderArray objectAtIndex:i] setCustomButtonArray:buttonHolderArray];
}
To deselect any other button selected when a different buttons handleTap: is called, I iterated through the customButtonArray in the subclass main file and set the selected property to NO. I also set the correct image from another array property that I manually populated with the images, which I did so the array didn't have to be populated every time a button was pressed. At the end, unselected all other buttons, like so:
// Populate two arrays: one with selected button images and the other with
// unselected button images that correspond to the buttons index in the
// customButtonArray
NSMutableArray *tempSelectedArray = [[NSMutableArray alloc] init];
[tempSelectedArray addObject:[UIImage imageNamed:#"newButtonSelected"]];
// Add the other selected button images...
// Set the property array with this array
[self setSelectedImagesArray:tempSelectedArray];
NSMutableArray *tempUnselectedArray = [[NSMutableArray alloc] init];
[tempUnselectedArray addObject:[UIImage imageNamed:#"newButtonUnselected"]];
// Add the other unselected button images...
// Set the property array with this array
[self setUnselectedImagesArray:tempUnselectedArray];
- (void)handleTap:(UIGestureRecognizer *)selector
{
// Get the count of buttons stored in the customButtonArray, use an if-elseif
// statement to check if the button is already selected or not, and iterate through
// the customButtonArray to find the button and set its properties
NSInteger buttonCount = [[self customButtonArray] count];
if (self.selected == YES)
{
for (int i = 0; i < buttonCount; i++)
{
if (self.tag == i)
{
[self setSelected:NO];
[self setImage:[[self unselectedImagesArray] objectAtIndex:i] forControlState:UIControlStateNormal];
}
}
}
else if (self.selected == NO)
{
for (int i = 0; i < buttonCount; i++)
{
if (self.tag == i)
{
[self setSelected:NO];
[self setImage:[[self selectedImagesArray] objectAtIndex:i] forControlState:UIControlStateNormal];
}
}
}
for (int i = 0; i < buttonCount; i++)
{
if (self.tag != i)
{
[self setSelected:NO];
[self setImage:[[self unselectedImagesArray] objectAtIndex:i] forControlState:UIControlStateNormal];
}
}
}
Thanks for all of the useful information though, figured I should share the final answer I came up with in detail to help anyone else that comes across this problem.
I figured out a pretty easy way to solve this. My example is for 2 buttons but you can easily add more if statements for additional buttons. Connect all buttons to the .h file as properties and name them (I did button1 & button2). Place the following code in your .m file and Connect it (via the storyboard) to all of your buttons. Make sure when you are setting up your button to set an image for BOTH the normal UIControlStateNormal & UIControlStateSelected or this wont work.
- (IBAction)selectedButton1:(id)sender {
if ([sender isSelected]) {
[sender setSelected:NO];
if (sender == self.button1) {
[self.button2 setSelected:YES];
}
if (sender == self.button2) {
[self.button1 setSelected:YES];
}
}
else
{
[sender setSelected:YES];
if (sender == self.button1) {
[self.button2 setSelected:NO];
}
if (sender == self.button2) {
[self.button1 setSelected:NO];
}
}
To answer "It throws a parse error if I have both headers importing each other"...
You should refrain from using #import in .h files as much as possible and instead declare whatever you're wanting to use as a forward class declaration:
#class MyCustomClass
#interface SomethingThatUsesMyCustomClass : UIViewController
#property (nonatomic, strong) MyCustomClass *mcc;
#end
Then #import the header in your .m file:
#import "MyCustomClass.h"
#implementation SomethingThatUsesMyCustomClass
-(MyCustomClass *)mcc
{
// whatever
}
#end
This approach will prevent errors caused by #import cycles.
Though I must say I agree with SergiusGee's comment on the question that this setup feels a bit strange.
The easiest approach here would be to get the parent UIView the buttons are on and iterate through it. Here's a quick example from my code:
for (UIView *tmpButton in bottomBar.subviews)
{
if ([tmpButton isKindOfClass:[UIButton class]])
{
if (tmpButton.tag == 100800)
{
tmpButton.selected = YES;
[tmpButton setTitleColor:[UIColor greenColor] forState:UIControlStateNormal];
[tmpButton setTitleColor:[UIColor greenColor] forState:UIControlStateHighlighted];
}else{
tmpButton.selected = NO;
[tmpButton setTitleColor:[UIColor redColor] forState:UIControlStateNormal];
[tmpButton setTitleColor:[UIColor redColor] forState:UIControlStateHighlighted];
}
}
}
Did you try using ReactiveCocoa framework and add some blocks for your code , this is not the most simple approach yet i would say it is the most effective when you have multiple dependencies and very good for scaling
I have created a small project for a solution to your problem using my suggested approach (I tried to adapt it to the good old MVC pattern instead of my preferred MVVM)
you can find it here
https://github.com/MWaly/MWButtonExamples
make sure to install cocoa pods file as we need "ReactiveCocoa" and "BlocksKit" for this sample
we will use two main classes
ViewController => The viewController object displaying the buttons
MWCustomButton => Custom UIButton which handles events
when creating the buttons a weak reference to the viewController is also created using the property
#property (weak) ViewController *ownerViewController ;
events will be handled using the help of blocksKit bk_addEventHandler method and pass it to the block of the ViewController (selectedButtonCallBackBlock)
[button bk_addEventHandler:^(id sender)
{
self.selectedButtonCallBackBlock(button);
} forControlEvents:UIControlEventTouchUpInside];
now in the ViewController for each button touched the callBackButtonBlock will be trigerred , where it will change its currently selected button if applicable
__weak __typeof__(self) weakSelf = self;
self.selectedButtonCallBackBlock=^(MWCustomButton* button){
__typeof__(self) strongSelf = weakSelf;
strongSelf.currentSelectedButton=button;
};
in the MWCustomButton class , it would listen for any changes in the property of "currentSelectedButton" of its ownerViewController and will change its selection property according to it using our good Reactive Cocoa
///Observing changes to the selected button
[[RACObserve(self, ownerViewController.currentSelectedButton) distinctUntilChanged] subscribeNext:^(MWCustomButton *x) {
self.selected=(self==x);
}];
i think this would solve your problem , again your question might be solved in a simpler way , however i believe using this approach would be more scalable and cleaner.
Loop through all views in parent view. Check if it is a UIButton(or your custom button class) and not the sender. Set all views isSelected to false. Once loop is finished, set sender button isSelected to true.
Swift 3 way:
func buttonPressed(sender: UIButton) {
for view in view.subviews {
if view is UIButton && view != sender {
(view as! UIButton).isSelected = false
}
}
sender.isSelected = true
}
Swift 4
//Deselect all tip buttons via IBOutlets
button1.isSelected = false
button2.isSelected = false
button3.isSelected = false
//Make the button that triggered the IBAction selected.
sender.isSelected = true
//Get the current title of the button that was pressed.
let buttonTitle = sender.currentTitle!

How to implement two IBActions in UIButton without overlap?

I drag 2 IBActions from a UIButton, one with touchDown event and second with drag Inside.
- (IBAction)clickButton:(UIButton *)sender {
NSLog(#"Click Button");
}
- (IBAction)dragInsideButton:(UIButton *)sender {
NSLog(#"Drag Button");
}
But when I drag inside, the touchDown action also gets fired.
How to disable touchDown event when dragInside.
Thanks!
i have solved a problem like this with using drag Events
add events to your button in .xib file or programatically.
programmatically is:
[mybut addTarget:self action:#selector(dragBegan:withEvent: )
forControlEvents: UIControlEventTouchDown];
[mybut addTarget:self action:#selector(dragMoving:withEvent: )
forControlEvents: UIControlEventTouchDragInside];
[mybut addTarget:self action:#selector(dragEnded:withEvent: )
forControlEvents: UIControlEventTouchUpInside |
UIControlEventTouchUpOutside];
then defininitons of events are:
- (void) dragBegan: (UIButton *) c withEvent:ev
{
NSLog(#"dragBegan......");
count=NO;//bool Value to decide the Down Event
c.tag=0;
[self performSelector:#selector(DownSelected:) withObject:mybut afterDelay:0.1];
//user must begin dragging in 0.1 second else touchDownEvent happens
}
- (void) dragMoving: (UIButton *) c withEvent:ev
{
NSLog(#"dragMoving..............");
c.tag++;
}
- (void) dragEnded: (UIButton *) c withEvent:ev
{
NSLog(#"dragEnded..............");
if (c.tag>0 && !count)
{
NSLog(#"make drag events");
}
}
-(void)DownSelected:(UIButton *)c
{
if (c.tag==0) {
NSLog(#"DownEvent");
count=YES;//count made Yes To interrupt drag event
}
}
This method is tested, and should do what I think you're trying to do. You can change the delay in the timer to get the effect you want. I had to connect 3 actions to the button to make this work -- the third action is a touchUp that resets the system to the starting condition.
#interface LastViewController ()
#property (nonatomic) BOOL touchedDown;
#property (strong,nonatomic) NSTimer *downTimer;
#end
#implementation LastViewController
- (void)viewDidLoad {
[super viewDidLoad];
self.touchedDown = NO;
}
-(IBAction)clickDown:(id)sender {
self.downTimer = [NSTimer scheduledTimerWithTimeInterval:.3 target:self selector:#selector(buttonAction:) userInfo:nil repeats:NO];
}
-(IBAction)dragInside:(id)sender {
[self.downTimer invalidate];
[self buttonAction:self];
}
-(void) buttonAction:(id) sender {
if ([sender isKindOfClass:[NSTimer class]]) {
self.touchedDown = YES;
NSLog(#"click down");
}else{
if (! self.touchedDown) {
NSLog(#"Drag");
}
}
}
-(IBAction)touchUpAction:(id)sender {
self.touchedDown = NO;
}
Try this way:
isClicked is property of type BOOL. Set to YES.
- (IBAction)clickButton:(UIButton *)sender { //touch down
if(isClick==YES){
NSLog(#"Click Button");
//do all your stuffs here
}
isClick=YES;
}
- (IBAction)dragInsideButton:(UIButton *)sender {
NSLog(#"Drag Button");
isClick=NO;
}
On top of this you can also implement removeTarget:Action:
Which ever method gets called first set isClick=NO, I expect clickButton is called first in button action.
I got from Two action methods for an UIButton; next track and seek forward:
Change it As per your requirement.
Personally I'd just track the button's state with an integer on your view controller or within a button subclass. If you track what the button is doing you can control what each of the actions do. In your .h file put in some stuff like this:
enum {
MyButtonScanning,
MyButtonStalling,
MyButtonIdle
};
#interface YourClass : UIViewController {
NSInteger buttonModeAt;
}
#property (nonatomic) NSInteger buttonModeAt;
-(IBAction)buttonPushedDown:(id)sender;
-(void)tryScanForward:(id)sender;
-(IBAction)buttonReleasedOutside:(id)sender;
-(IBAction)buttonReleasedInside:(id)sender;
#end
And then in your .m file throw in some of this stuff:
#implementation YourClass
///in your .m file
#synthesize buttonModeAt;
///link this to your button's touch down
-(IBAction)buttonPushedDown:(id)sender {
buttonModeAt = MyButtonStalling;
[self performSelector:#selector(tryScanForward:) withObject:nil afterDelay:1.0];
}
-(void)tryScanForward:(id)sender {
if (buttonModeAt == MyButtonStalling) {
///the button was not released so let's start scanning
buttonModeAt = MyButtonScanning;
////your actual scanning code or a call to it can go here
[self startScanForward];
}
}
////you will link this to the button's touch up outside
-(IBAction)buttonReleasedOutside:(id)sender {
if (buttonModeAt == MyButtonScanning) {
///they released the button and stopped scanning forward
[self stopScanForward];
} else if (buttonModeAt == MyButtonStalling) {
///they released the button before the delay period finished
///but it was outside, so we do nothing
}
self.buttonModeAt = MyButtonIdle;
}
////you will link this to the button's touch up inside
-(IBAction)buttonReleasedInside:(id)sender {
if (buttonModeAt == MyButtonScanning) {
///they released the button and stopped scanning forward
[self stopScanForward];
} else if (buttonModeAt == MyButtonStalling) {
///they released the button before the delay period finished so we skip forward
[self skipForward];
}
self.buttonModeAt = MyButtonIdle;
}
After that just link the button's actions to what I've noted in the comments before the IBactions. I haven't tested this but it should work.
i'm not sure it will work but you can try
- (IBAction)dragInsideButton:(UIButton *)sender {
[sender removeTarget:self forSelector:#selector(clickButton:) forControlEvent:UIControlEventTouchDown];
}

Getting Button Tag Value in iPhone

I have made 20 Buttons dynamically, and I got the tag values of all Buttons.
But I need to know how to use that tag values.
I need information on every button pressed with tag values.
So, how do I use those tag values?
You need to set target-action of each button.
[button setTarget:self action:#selector(someMethod:) forControlEvents:UIControlEventTouchUpInside];
Then implement someMethod: like this:
- (void)someMethod:(UIButton *)sender {
if (sender.tag == 1) {
// do action for button with tag 1
} else if (sender.tag == 2) {
// do action for button with tag 2
} // ... and so on
}
Why do you need to use the tag to get the button. You can directly get the buttons reference from its action method.
- (void)onButtonPressed:(UIButton *)button {
// "button" is the button which is pressed
NSLog(#"Pressed Button: %#", button);
// You can still get the tag
int tag = button.tag;
}
I hope you have added the target-action for the button.
[button addTarget:self action:#selector(onButtonPressed:)
forControlEvents:UIControlEventTouchUpInside];
You can get reference to that your buttons using that tags. For example, you've added UIButtons to UIView *mainView. To get reference to that buttons you should write following:
UIButton *buttonWithTag1 = (UIButton *)[mainView viewWithTag:1];
Set the tags like this :
for (createButtonIndex=0; createButtonIndex<buttonsCount; createButtonIndex++)
{
buttonCaps.tag=createButtonIndex;
}
And add the method to trap the tags :-
-(void)buttonsAction:(id)sender
{
UIButton *instanceButton = (UIButton*)sender;
switch(instanceButton.tag)
{
case 1(yourTags):
//Code
break;
case 2:
//Code
break;
}
}
Hope this Helps !!
- (IBAction)buttonPressed:(id)sender {
UIButton selectedButton = (UIButton *)sender;
NSLog(#"Selected button tag is %d%", selectedButton.tag);
}
usefully we use btn tag if You Write One Function For (more than one) Buttons .in action if we want to write separate Action For button at that situvation we use btn tag.it can get two ways
I) case sender.tag
//if we have four buttons Add,mul,sub,div having Same selector and add.tag=10
mul.tag=20,sub.tag=30,div.tag=40;
-(IBAction) dosomthing:(id)sender
{
int x=10;
int y=20;
int result;
if(sender.tag==10)
{
result=x+y;
}else if(sender.tag==20)
{
result=x*y;
}else if(sender.tag==30)
{
result=x-y;
}else if(sender.tag==40)
{
result=x/y;
}
NSLog(#"%i",result);
}
2)Case
UIButton *btn=[self.view viewWithTag:10];
then you got object of add button uyou can Hide It With btn.hidden=YES;
UIButton *btn = (UIButton *)[mainView viewWithTag:button.tag];

Resources