grep -2riP
I saw it on commandline fu. I checked the man page, but could not find it, it is possible that I may have missed it.
From the grep man-page:
-C NUM, -NUM, --context=NUM
Print NUM lines of output context. Places a line containing a group separator (described under --group-separator)
between contiguous groups
of matches. With the -o or --only-matching option, this has no effect and a warning is given.
so, grep -2 is equivalent to grep -C 2, which tells grep to display 2 lines before and after a match.
Related
I have the following issue.
In a script, I have to execute the hdparm command on /dev/xvda1 path.
From the command output, I have to extract the MB/sec values calculated.
So, for example, if executing the command I have this output:
/dev/xvda1:
Timing cached reads: 15900 MB in 1.99 seconds = 7986.93 MB/sec
Timing buffered disk reads: 478 MB in 3.00 seconds = 159.09 MB/sec
I have to extract 7986.93 and 159.09.
I tried:
grep -o -E '[0-9]+', but it returns to me all the six number in the output
grep -o -E '[0-9]', but it return to me only the first character of the six values.
grep -o -E '[0-9]+$', but the output is empty, I suppose because the number is not the last character set of outoput.
How can I achieve my purpose?
To get the last number, you can add a .* in front, that will match as much as possible, eating away all the other numbers. However, to exclude that part from the output, you need GNU grep or pcregrep or sed.
grep -Po '.* \K[0-9.]+'
Or
sed -En 's/.* ([0-9.]+).*/\1/p'
Consider using awk to just print the fields you want rather than matching on numbers. This will work using any awk in any shell on every Unix box:
$ hdparm whatever | awk 'NF>1{print $(NF-1)}'
7986.93
159.09
I am new to linux and I am experimenting with basic terminal commands. I found out that I can list all users using compgen -u but what if I only want to display the bottom line outputs ?
Ok lets say the output of compgen -u goes like this:
extra
extra
extra
extra
extra
extra
extra
extra
extra
John
William
Kate
Harold
I can only use grep to find a single text (ex. compgen -u | grep John). But what if I want to use grep to display John as well as all the remaining entries after it ?
sed or awk solution would be easier, but if you can only use grep, then the option --after-context (or -A) might do:
grep -A 5 John file
The drawback is that you need to know the number of lines to display after the matching (or use an arbitrary big number for the rest of the file).
compgen -u | grep -A$(compgen -u| wc -l) John
Explanation:
From man grep
-A NUM, --after-context=NUM
Print NUM lines of trailing context after matching lines. Places a line containing a group separator (described under --group-separator) between
contiguous groups of matches.
grep -A -- print number of rows after pattern
$() -- Execute unix command
compgen -u| wc -l --> Get total number of rows of output of command.
You can use the following one-liner :
n=$( compgen -u | grep -n John | head -1 | cut -d ":" -f 1 ) && compgen -u | tail -n +$n
This finds out the line number for first occurrence of John, and prints everything starting that line.
Suppose I write a grep query to find out the occurrence of a method call on an object like this:
// might not be accurate, but irrelevant
grep -nr "[[:alnum:]]\.[[:alnum:]](.*)" .
This would give many results. How to find out how many such results are obtained?
What about using | wc -l to count the number of result lines?
What about
man grep | grep "count"
It outputs
-c, --count
Suppress normal output; instead print a count of matching lines for each input file. [...]
Previous answers are OK, I just want to put it into command line instructions in order to have copy-paste versions (from explicit to simplest) for the future:
grep --count "PATTERN" FILE
Is exactly the same as:
grep -c "PATTERN" FILE
And it is equivalent to:
grep "PATTERN" FILE | wc -l
As a bonus, below i give you a version where a file with a list of patterns is used.
grep -count --file=PATTERNFILE FILE
or simply
grep -cf PATTERNFILE FILE
I want to run ack or grep on HTML files that often have very long lines. I don't want to see very long lines that wrap repeatedly. But I do want to see just that portion of a long line that surrounds a string that matches the regular expression. How can I get this using any combination of Unix tools?
You could use the grep options -oE, possibly in combination with changing your pattern to ".{0,10}<original pattern>.{0,10}" in order to see some context around it:
-o, --only-matching
Show only the part of a matching line that matches PATTERN.
-E, --extended-regexp
Interpret pattern as an extended regular expression (i.e., force grep to behave as egrep).
For example (from #Renaud's comment):
grep -oE ".{0,10}mysearchstring.{0,10}" myfile.txt
Alternatively, you could try -c:
-c, --count
Suppress normal output; instead print a count of matching lines
for each input file. With the -v, --invert-match option (see
below), count non-matching lines.
Pipe your results thru cut. I'm also considering adding a --cut switch so you could say --cut=80 and only get 80 columns.
You could use less as a pager for ack and chop long lines: ack --pager="less -S" This retains the long line but leaves it on one line instead of wrapping. To see more of the line, scroll left/right in less with the arrow keys.
I have the following alias setup for ack to do this:
alias ick='ack -i --pager="less -R -S"'
grep -oE ".\{0,10\}error.\{0,10\}" mylogfile.txt
In the unusual situation where you cannot use -E, use lowercase -e instead.
Explanation:
cut -c 1-100
gets characters from 1 to 100.
The Silver Searcher (ag) supports its natively via the --width NUM option. It will replace the rest of longer lines by [...].
Example (truncate after 120 characters):
$ ag --width 120 '#patternfly'
...
1:{"version":3,"file":"react-icons.js","sources":["../../node_modules/#patternfly/ [...]
In ack3, a similar feature is planned but currently not implemented.
Taken from: http://www.topbug.net/blog/2016/08/18/truncate-long-matching-lines-of-grep-a-solution-that-preserves-color/
The suggested approach ".{0,10}<original pattern>.{0,10}" is perfectly good except for that the highlighting color is often messed up. I've created a script with a similar output but the color is also preserved:
#!/bin/bash
# Usage:
# grepl PATTERN [FILE]
# how many characters around the searching keyword should be shown?
context_length=10
# What is the length of the control character for the color before and after the
# matching string?
# This is mostly determined by the environmental variable GREP_COLORS.
control_length_before=$(($(echo a | grep --color=always a | cut -d a -f '1' | wc -c)-1))
control_length_after=$(($(echo a | grep --color=always a | cut -d a -f '2' | wc -c)-1))
grep -E --color=always "$1" $2 |
grep --color=none -oE \
".{0,$(($control_length_before + $context_length))}$1.{0,$(($control_length_after + $context_length))}"
Assuming the script is saved as grepl, then grepl pattern file_with_long_lines should display the matching lines but with only 10 characters around the matching string.
I put the following into my .bashrc:
grepl() {
$(which grep) --color=always $# | less -RS
}
You can then use grepl on the command line with any arguments that are available for grep. Use the arrow keys to see the tail of longer lines. Use q to quit.
Explanation:
grepl() {: Define a new function that will be available in every (new) bash console.
$(which grep): Get the full path of grep. (Ubuntu defines an alias for grep that is equivalent to grep --color=auto. We don't want that alias but the original grep.)
--color=always: Colorize the output. (--color=auto from the alias won't work since grep detects that the output is put into a pipe and won't color it then.)
$#: Put all arguments given to the grepl function here.
less: Display the lines using less
-R: Show colors
S: Don't break long lines
Here's what I do:
function grep () {
tput rmam;
command grep "$#";
tput smam;
}
In my .bash_profile, I override grep so that it automatically runs tput rmam before and tput smam after, which disabled wrapping and then re-enables it.
ag can also take the regex trick, if you prefer it:
ag --column -o ".{0,20}error.{0,20}"
Is there a way to make grep output "words" from files that match the search expression?
If I want to find all the instances of, say, "th" in a number of files, I can do:
grep "th" *
but the output will be something like (bold is by me);
some-text-file : the cat sat on the mat
some-other-text-file : the quick brown fox
yet-another-text-file : i hope this explains it thoroughly
What I want it to output, using the same search, is:
the
the
the
this
thoroughly
Is this possible using grep? Or using another combination of tools?
Try grep -o:
grep -oh "\w*th\w*" *
Edit: matching from Phil's comment.
From the docs:
-h, --no-filename
Suppress the prefixing of file names on output. This is the default
when there is only one file (or only standard input) to search.
-o, --only-matching
Print only the matched (non-empty) parts of a matching line,
with each such part on a separate output line.
Cross distribution safe answer (including windows minGW?)
grep -h "[[:alpha:]]*th[[:alpha:]]*" 'filename' | tr ' ' '\n' | grep -h "[[:alpha:]]*th[[:alpha:]]*"
If you're using older versions of grep (like 2.4.2) which do not include the -o option, then use the above. Else use the simpler to maintain version below.
Linux cross distribution safe answer
grep -oh "[[:alpha:]]*th[[:alpha:]]*" 'filename'
To summarize: -oh outputs the regular expression matches to the file content (and not its filename), just like how you would expect a regular expression to work in vim/etc... What word or regular expression you would be searching for then, is up to you! As long as you remain with POSIX and not perl syntax (refer below)
More from the manual for grep
-o Print each match, but only the match, not the entire line.
-h Never print filename headers (i.e. filenames) with output lines.
-w The expression is searched for as a word (as if surrounded by
`[[:<:]]' and `[[:>:]]';
The reason why the original answer does not work for everyone
The usage of \w varies from platform to platform, as it's an extended "perl" syntax. As such, those grep installations that are limited to work with POSIX character classes use [[:alpha:]] and not its perl equivalent of \w. See the Wikipedia page on regular expression for more
Ultimately, the POSIX answer above will be a lot more reliable regardless of platform (being the original) for grep
As for support of grep without -o option, the first grep outputs the relevant lines, the tr splits the spaces to new lines, the final grep filters only for the respective lines.
(PS: I know most platforms by now would have been patched for \w.... but there are always those that lag behind)
Credit for the "-o" workaround from #AdamRosenfield answer
It's more simple than you think. Try this:
egrep -wo 'th.[a-z]*' filename.txt #### (Case Sensitive)
egrep -iwo 'th.[a-z]*' filename.txt ### (Case Insensitive)
Where,
egrep: Grep will work with extended regular expression.
w : Matches only word/words instead of substring.
o : Display only matched pattern instead of whole line.
i : If u want to ignore case sensitivity.
You could translate spaces to newlines and then grep, e.g.:
cat * | tr ' ' '\n' | grep th
Just awk, no need combination of tools.
# awk '{for(i=1;i<=NF;i++){if($i~/^th/){print $i}}}' file
the
the
the
this
thoroughly
grep command for only matching and perl
grep -o -P 'th.*? ' filename
I was unsatisfied with awk's hard to remember syntax but I liked the idea of using one utility to do this.
It seems like ack (or ack-grep if you use Ubuntu) can do this easily:
# ack-grep -ho "\bth.*?\b" *
the
the
the
this
thoroughly
If you omit the -h flag you get:
# ack-grep -o "\bth.*?\b" *
some-other-text-file
1:the
some-text-file
1:the
the
yet-another-text-file
1:this
thoroughly
As a bonus, you can use the --output flag to do this for more complex searches with just about the easiest syntax I've found:
# echo "bug: 1, id: 5, time: 12/27/2010" > test-file
# ack-grep -ho "bug: (\d*), id: (\d*), time: (.*)" --output '$1, $2, $3' test-file
1, 5, 12/27/2010
cat *-text-file | grep -Eio "th[a-z]+"
You can also try pcregrep. There is also a -w option in grep, but in some cases it doesn't work as expected.
From Wikipedia:
cat fruitlist.txt
apple
apples
pineapple
apple-
apple-fruit
fruit-apple
grep -w apple fruitlist.txt
apple
apple-
apple-fruit
fruit-apple
I had a similar problem, looking for grep/pattern regex and the "matched pattern found" as output.
At the end I used egrep (same regex on grep -e or -G didn't give me the same result of egrep) with the option -o
so, I think that could be something similar to (I'm NOT a regex Master) :
egrep -o "the*|this{1}|thoroughly{1}" filename
To search all the words with start with "icon-" the following command works perfect. I am using Ack here which is similar to grep but with better options and nice formatting.
ack -oh --type=html "\w*icon-\w*" | sort | uniq
You could pipe your grep output into Perl like this:
grep "th" * | perl -n -e'while(/(\w*th\w*)/g) {print "$1\n"}'
grep --color -o -E "Begin.{0,}?End" file.txt
? - Match as few as possible until the End
Tested on macos terminal
$ grep -w
Excerpt from grep man page:
-w: Select only those lines containing matches that form whole words. The test is that the matching substring must either be at the beginning of the line, or preceded by a non-word constituent character.
ripgrep
Here are the example using ripgrep:
rg -o "(\w+)?th(\w+)?"
It'll match all words matching th.