When making a call to get the Yodlee Fastlink form I keep getting redirected to a URL with parameters oauth_error_problem=token_rejected and oauth_error_code=413. I am generating the user token via the recommended OAuthAccessTokenManagementService.getOAuthAccessToken call immediately before creating the oauth signature and substituting them into their respective positions of the sample url as outlined here Fastlink Integration Guide. I am using a token generated for an account in the Private Zone, is there a separate base url that I should be using for fastlink, like there is for other REST calls? Also, is there a list of oauth-related error codes and explanations? The error codes section under FAQ does not include references to this code in particular or anything else related to oauth.
You are getting this error as you are using the wrong URL to connect to FastLink for the specified token.
is there a separate base url that I should be using for fastlink, like there is for other REST calls?
Yes, the base URL for your private zone will be different than the one on the developer portal. Please contact your account manager to get the correct FastLink URL.
is there a list of oauth-related error codes and explanations?
Right now there is no documentation on the ouath error codes. We will take this as feedback and will have documentation around it.
Related
I am new to Priority and can't seem to find in the docs where I can generate an API key for accessing the REST API. It was my understanding that a user has to have the API license key enabled (which my user does).. But where can I generate the link? Is there any good resource to find this out? I've scoured the docs and while they mention using it I didn't see any mention of how to generate the endpoint to send requests to.
Thanks!
There is a Procedure named "Send Program Activation Link"
(internal name MGLINK) you can run to receive the link.
It usually looks like this:
https://priority.web.url/odata/Priority/tabula.inifile/envCode
The API Username (on USERSB form) and the Priority user's password are
needed for the Authorization header.
I am trying to disable my logic app via a Http post from within the workflow, but I can't seem to get the authorization to work with my AD.
It says I need the Authorization Bearer token header, but when I fill the information in the fields marked with the red star it always fails.
Either I input the wrong information or I am doing something else wrong.
Where do I get all the information for the fields for the OAuth to work?
Also isn't some of these for using against a web application like an API?
In that case how do I do this only in relation to the resource explorer API?
UPDATE
So i have tried to put it as a web application in my AD and that doesn't work either, is there ANY documentation about this anywhere??
OK, so i found a workaround or maybe this is even the right way to do it.
Now using a HTTP Post Connector in Logic apps is probably the right way to do it when you have for example a API registered as an application in you AD that has the right permissions. what i did was:
First: Using/Created the Azure Resource Management Connector i didn't know excised, called "Invoke Recource Operation".
Second: After it propted you to login (with for example a service account), this layout is show to fill in the same inputs as in the request POST URL in the above connector.
Shown below:
This worked and disabled the LA perfectly.
I am trying to connect to JIRA using OAuth. I have followed this tutorial but when i want to create a new Application Link, it asks me to enter the URL of the application i want to link which seems strange in my case, since i want to connect a Google spreadsheet to JIRA !!!
I really appreciate your help Welsh, i have managed to generate a public key thanks to you and a new application link, now i want to obtain a request token from JIRA but i always get an error message when executing the request token command.
The document states:
When creating the Application Link use a placeholder URL or the correct URL to your client, if your client can be reached via HTTP and choose the Generic Application type.
So you can either use the URL to the Google Docs Spreadsheet that will be using the token to authenticate or you can just use a placeholder URL.
Has anyone had success using Stripe connect with an iOS app. I have a few questions:
I'm following the guidelines here: https://stripe.com/docs/connect/getting-started
Registering an Application: easy, no problem here
Then a little further down:
Send your users to Stripe: again, easy no problem here, I just have a button that opens up the link in a UIWebView. I assume having the client_id in the URL is fine? A lot of my uncertainty is what IDs/keys I should hard-code into the app
Then a little further down:
After the user connects or creates a Stripe account, we'll redirect them back to the redirect_uri you set in yourapplication settings with a code parameter or an error.
What I'm doing here is using the UIWebview's webView:shouldStartLoadWithReqest:navigationType delegate method to check for the string "code=" in the URL. If it finds that, then I'm able to grab the "code" parameter. So in reality, the redirect_uri is completely unnecessary for me. Is this the right way to handle this? Should I be doing this within my app or on my server?
After receiving the code, we are supposed to make a POST call to receive an access_token. Again, should this be done within the app or on the Server? It requires the use of a secret_key, so I'm guessing server? And how do I send credit card information along with this token if the token needs to be sent to the server? I know how to obtain the card number, exp date, and CVV. But in terms of passing it to the server (with or without the token) is something I'm not sure of.
Then when it comes to actually writing PHP, Ruby, or Python code on the server, I'm at a total loss.
Any help would be greatly appreciated.
You should setup a small web app to create stripe charges and storing you customers Authorization Code. Configure two routes in your web app for redirect_uri and webhook_uri and add the url in your Stripe Apps settings. The charges should be created from a server side app because it requires the secret_key / authorization_code which should not be stored in an iPad app. Otherwise they may lead to a security leak. I'm trying to describe the concept below:
Provide the stripe connect button in your app and set the link to open in Safari (not in an web view). You should add a state parameter to the url with an id which is unique to your users.
On tapping the button your user will be redirected to Stripe where s/he will be asked to authorize your application. Upon authorization stripe will hit your redirect_uri with a authorization_code and the state you previously provided. Do a post call according to Stripe Documentation with the authorization_code to get an access_token. Store the access_token mapped with the state in a database.
Define a custom url scheme in your app. Invoke the custom url from your web app. The user supposed to open the url in mobile safari. So invoking the custom url will reopen your application. You can pass an additional parameter to indicate failure / success. In your app update the view based on this parameter.
Now you are all set to create a charge on your server on behalf of the iPad user. Use stripe iOS sdk to generate a card_token from the card information. It'll require your stripe publishable_key. Then define an api in your web app which takes 3 parameters: card_token, user_id and amount. Call this api from your iPad app whenever you want to create a charge. You can also encrypt this information with a key if you're worried about security using any standard encryption method. You can easily decrypt the info in your web app as you know the key.
When this api is called from the iPad app you'll receive the user_id (which you saved as state previously), card_token and amount. Retrieve the access_token mapped to the user_id (or state). You can then made a charge on behalf of the user using the access_token, card_token and amount.
You can use ruby / php / python / node in the server as Stripe provides sdk for them. I assume other languages can be used as well as there is a REST interface.
Please note that this is just a concept. It should work like it but I haven't implemented it yet. I'll update this answer with sample code when I'm done.
You can use UIWebView. You will still need to use redirect urls and monitor the redirect using the delegate "webView:shouldStartLoadWithRequest:navigationType:"
I'm trying to implement Soundcloud connect and having a weird issue.
First thing I do is send my users to
https://soundcloud.com/connect?client_id=MY_CLIENT_ID&redirect_uri=http://myredirecturl.example.com&state=RANDOM_STRING&display=page&response_type=code&scope=email
When users connect they get redirected to
http://myredirecturl.example.com?error=invalid_scope&error_description=The+requested+scope+is+invalid%2C+unknown%2C+or+malformed.&state=RANDOM_STRING
The same happens if I use scope=*.
However, if I use scope=non-expiring it lets me go through, but I need the users email and that type of scope doesn't have enough grants.
I thought it had something to do with my app being in development mode, but Osman at Soundcloud said it doesn't.
Thanks.
The 'email' scope is not available to all integrations. It's used for a few custom integrations that have provided us with accepted terms of service / privacy policies. There is no way to get a user's email address using the SoundCloud API.
You should however be able to use the '*' scope to get an expiring access token. I'll check with our app team to see why this is giving you an error. I'll edit my answer once I have more information there.
For your purposes, I would stay with the 'non-expiring' scope and simply prompt a user for their email address (providing them with a way to agree to your terms of use / privacy information).
Using scope=* sometimes doesn't work because the url is not properly encoded. If you are getting this error while using the * wildcard, try properly encoding the url, using a function like urlencode() (for PHP).