I'm pretty green regarding docker and find myself facing the following problem:
I'm trying to create a dockerfile to generate an image with my companie software on it. During the installation of that software the install process check if ssh is running with the following command:
if [ $(pgrep sshd | wc -l) -eq 0 ]; then
I probably need to precise that I'm installing and starting open-ssh during that same process.
Can you at all check that a service is running during the image creation ?
I cannot ignore that step has it is executed as part of a self extracting mechanism.
Any clue toward the right direction would be appreciated.
An image cannot run services. You are just creating all the necessary things needed for your container to run, like installing databases, servers, or copying some config files etc in the Dockerfile. The last step in the Dockerfile is where you can give instructions on what to do when you issue a docker run command. A script or command can be specified using CMD or ENTRYPOINT in the Dockerfile.
To answer your question, during the image creation process, you cannot check whether a service is running or not. When the container is started, docker will execute the script or command that you can specify in the CMD or ENTRYPOINT. You can use that script to check if your services are running or not and take necessary action after that.
It is possible to run services during image creation. All processes are killed once a RUN command completes. A service will not keep running between RUN commands. However, each RUN command can start services and use them.
If an image creation command needs a service, start the service and then run the command that depends on the service, all in one RUN command.
RUN sudo service ssh start \
&& ssh localhost echo ok \
&& ./install
The first line starts the ssh server and succeeds with the server running.
The second line tests if the ssh server is up.
The third line is a placeholder: the 'install' command can use the localhost ssh server.
In case the service fails to start, the docker build command will fail.
Here is my simple docker file
FROM java:8
EXPOSE 4000
now when I run it using the following command
sudo docker run --name hello dockerfile
and do docker ps -a it shows the status as exited. I just want to keep this container up and running so I can ssh into this container and probably transfer files and so on. It looks like containers are mainly used to run servers am I correct?
you can at least keep your container up with something like docker run -d hello sleep infinity but as said by René M, you should put in your Dockerfile something to do in your CMD or ENTRYPOINT, see the doc
https://docs.docker.com/engine/reference/builder/#cmd
and
https://docs.docker.com/engine/reference/builder/#entrypoint
That is realy simple.
Because your container is running nothing that last long. What happens is, that this container starts, has nothing to do and stops.
What you can do is:
Run the container in interactive mode with attached tty. This way your console enters the container after it's start, and let him run a tty, which is something to do and prevends the container from stopping. Then you can work inside this container, like installing an application. Doing this your work will be lost after stoping the container. But you can run docker commit on that container, which makes your changes persistent.
docker run -i -t --name hello dockerfile
Enhance your dockerfile with something usefull. Like copying an application into the container and provide a CMD command to run, when the container starts.
After this the container will last as long as your CMD command runs. If the command is a server or deamon application, the container will last for ever and will only stop when you stop him.
I am trying to run a simple docker container with my web application installed (Not using docker file).
During the testing I would always run a container using -t -i option and then start the tomcat service inside it by running a shell script.
How when I am moving to production I dont want to use the -t -i option any more and just need my Tomcat service to start and be the only primary service.
I trying pointing the entrypoint to the start up script for starting tomcat but the container terminates after that script finishes.
How do I run a container, start a service and keep that service as the single primary service of the container?
Note: I read some posts about supervisor but not sure if I would need to start building my image from scratch if I go that route? I would prefer not doing that.
Any suggestions?
If you have a Dockerfile that uses an entrypoint pattern, it will look something like this:
(Dockerfile)
FROM ubuntu
...Some configuration steps...
add start.sh /start.sh
ENTRYPOINT ["/start.sh"]
All you need to do is make sure your start.sh script 'hangs' in some way. Some people like to tail the syslogs, but tailing any file that exists will work.
(start.sh)
#!/bin/bash
service Your_Service_Or_Whatever start
tail -f /var/log/dmesg
A shorter version:
FROM ubuntu
...Some configuration steps...
ENTRYPOINT ["/bin/sh", "-c", "while true; do sleep 1; done"]
tested with Docker version 1.12.1, build 23cf638
Use docker --version to find out your version
Docker containers as default will run according to the configuration in the images Dockerfile. If you usually run a container with the -i flag, you leave STDIN open allowing you access to the containers entrypoint or it could be a bash shell. To achieve what you want, you can run the container in a detached state passing your commands into docker run directly.
docker run -d myapp /opt/catalina/bin/startup.sh
This will run the myapp container in a detached state and will run the command passed as the 3rd argument. If the command results in a long lived service, the container will stay active as long as the service is.
This is explained in detail in the docs.
I'm trying to get a docker container to never shutdown.
If I run a docker container with the -d flag the container will be run in the background.
For example, can this be done:
Start docker container with -it flags
start entrypoint application
entrypoint application creates 10 other services/processes to run in that same container
entrypoint application terminates
Will the docker container stay up now that the application mentioned in the entrypoint has exited?
Why don't you simply try? AFAIU -d or -it won't affect the container termination. And I guess you understand that starting those 10 processes means you violate the docker's idea of one process per container. Why don't you start 10 containers instead? You can also do that from your start container, and they will keep running even if the starting container will terminate.
You could also give docker docs a try: https://docs.docker.com/articles/host_integration/
-it flag means you want your standard input and output routed to/from container. This is basically and conceptually incompatible with running forever.
In general container will shutdown when entry point exits. if you want to keep container running you should run one (probably the last application) not as a background daemon but in foreground. for example if nginx is the last service you want to run. What you would do as your last line of entry point script (if thats a shell script) should be some thing like this:
nginx -g "daemon off;"
I've seen a bunch of tutorials that seem do the same thing I'm trying to do, but for some reason my Docker containers exit. Basically, I'm setting up a web-server and a few daemons inside a Docker container. I do the final parts of this through a bash script called run-all.sh that I run through CMD in my Dockerfile. run-all.sh looks like this:
service supervisor start
service nginx start
And I start it inside of my Dockerfile as follows:
CMD ["sh", "/root/credentialize_and_run.sh"]
I can see that the services all start up correctly when I run things manually (i.e. getting on to the image with -i -t /bin/bash), and everything looks like it runs correctly when I run the image, but it exits once it finishes starting up my processes. I'd like the processes to run indefinitely, and as far as I understand, the container has to keep running for this to happen. Nevertheless, when I run docker ps -a, I see:
➜ docker_test docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
c7706edc4189 some_name/some_repo:blah "sh /root/run-all.sh 8 minutes ago Exited (0) 8 minutes ago grave_jones
What gives? Why is it exiting? I know I could just put a while loop at the end of my bash script to keep it up, but what's the right way to keep it from exiting?
If you are using a Dockerfile, try:
ENTRYPOINT ["tail", "-f", "/dev/null"]
(Obviously this is for dev purposes only, you shouldn't need to keep a container alive unless it's running a process eg. nginx...)
I just had the same problem and I found out that if you are running your container with the -t and -d flag, it keeps running.
docker run -td <image>
Here is what the flags do (according to docker run --help):
-d, --detach=false Run container in background and print container ID
-t, --tty=false Allocate a pseudo-TTY
The most important one is the -t flag. -d just lets you run the container in the background.
This is not really how you should design your Docker containers.
When designing a Docker container, you're supposed to build it such that there is only one process running (i.e. you should have one container for Nginx, and one for supervisord or the app it's running); additionally, that process should run in the foreground.
The container will "exit" when the process itself exits (in your case, that process is your bash script).
However, if you really need (or want) to run multiple service in your Docker container, consider starting from "Docker Base Image", which uses runit as a pseudo-init process (runit will stay online while Nginx and Supervisor run), which will stay in the foreground while your other processes do their thing.
They have substantial docs, so you should be able to achieve what you're trying to do reasonably easily.
you can run plain cat without any arguments as mentioned by bro #Sa'ad to simply keep the container working [actually doing nothing but waiting for user input] (Jenkins' Docker plugin does the same thing)
The reason it exits is because the shell script is run first as PID 1 and when that's complete, PID 1 is gone, and docker only runs while PID 1 is.
You can use supervisor to do everything, if run with the "-n" flag it's told not to daemonize, so it will stay as the first process:
CMD ["/usr/bin/supervisord", "-n"]
And your supervisord.conf:
[supervisord]
nodaemon=true
[program:startup]
priority=1
command=/root/credentialize_and_run.sh
stdout_logfile=/var/log/supervisor/%(program_name)s.log
stderr_logfile=/var/log/supervisor/%(program_name)s.log
autorestart=false
startsecs=0
[program:nginx]
priority=10
command=nginx -g "daemon off;"
stdout_logfile=/var/log/supervisor/nginx.log
stderr_logfile=/var/log/supervisor/nginx.log
autorestart=true
Then you can have as many other processes as you want and supervisor will handle the restarting of them if needed.
That way you could use supervisord in cases where you might need nginx and php5-fpm and it doesn't make much sense to have them apart.
Motivation:
There is nothing wrong in running multiple processes inside of a docker container. If one likes to use docker as a light weight VM - so be it. Others like to split their applications into micro services. Me thinks: A LAMP stack in one container? Just great.
The answer:
Stick with a good base image like the phusion base image. There may be others. Please comment.
And this is yet just another plead for supervisor. Because the phusion base image is providing supervisor besides of some other things like cron and locale setup. Stuff you like to have setup when running such a light weight VM. For what it's worth it also provides ssh connections into the container.
The phusion image itself will just start and keep running if you issue this basic docker run statement:
moin#stretchDEV:~$ docker run -d phusion/baseimage
521e8a12f6ff844fb142d0e2587ed33cdc82b70aa64cce07ed6c0226d857b367
moin#stretchDEV:~$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS
521e8a12f6ff phusion/baseimage "/sbin/my_init" 12 seconds ago Up 11 seconds
Or dead simple:
If a base image is not for you... For the quick CMD to keep it running I would suppose something like this for bash:
CMD exec /bin/bash -c "trap : TERM INT; sleep infinity & wait"
Or this for busybox:
CMD exec /bin/sh -c "trap : TERM INT; (while true; do sleep 1000; done) & wait"
This is nice, because it will exit immediately on a docker stop.
Just plain sleep or cat will take a few seconds before the container is forcefully killed by docker.
Updates
As response to Charles Desbiens concerning running multiple processes in one container:
This is an opinion. And the docs are pointing in this direction. A quote: "It’s ok to have multiple processes, but to get the most benefit out of Docker, avoid one container being responsible for multiple aspects of your overall application." For sure it obviously much more powerful to devide your complex service into multiple containers. But there are situations where it can be beneficial to go the one container route. Especially for appliances. The GitLab Docker image is my favourite example of a multi process container. It makes deployment of this complex system easy. There is no way for mis-configuration. GitLab retains all control over their appliance. Win-Win.
Make sure that you add daemon off; to you nginx.conf or run it with CMD ["nginx", "-g", "daemon off;"] as per the official nginx image
Then use the following to run both supervisor as service and nginx as foreground process that will prevent the container from exiting
service supervisor start && nginx
In some cases you will need to have more than one process in your container, so forcing the container to have exactly one process won't work and can create more problems in deployment.
So you need to understand the trade-offs and make your decision accordingly.
Since docker engine v1.25 there is an option called init.
Docker-compose included this command as of version 3.7.
So my current CMD when running a container that should run into infinity:
CMD ["sleep", "infinity"]
and then run it using:
docker build
docker run --rm --init app
crf.:
rm docs and init docs
Capture the PID of the ngnix process in a variable (for example $NGNIX_PID) and at the end of the entrypoint file do
wait $NGNIX_PID
In that way, your container should run until ngnix is alive, when ngnix stops, the container stops as well
Along with having something along the lines of : ENTRYPOINT ["tail", "-f", "/dev/null"] in your docker file, you should also run the docker container with -td option. This is particularly useful when the container runs on a remote m/c. Think of it more like you have ssh'ed into a remote m/c having the image and started the container. In this case, when you exit the ssh session, the container will get killed unless it's started with -td option. Sample command for running your image would be: docker run -td <any other additional options> <image name>
This holds good for docker version 20.10.2
There are some cases during development when there is no service yet but you want to simulate it and keep the container alive.
It is very easy to write a bash placeholder that simulates a running service:
while true; do
sleep 100
done
You replace this by something more serious as the development progress.
How about using the supervise form of service if available?
service YOUR_SERVICE supervise
Once supervise is successfully running, it will not exit unless it is
killed or specifically asked to exit.
Saves having to create a supervisord.conf