How to display objects with sound sequentially, preferably with timing? - ios

Xcode 5, iOS 7
I'm trying to create/display several objects sequentially, with sound, and preferably with some specified timing.
For example, I'd like to create and display 10 labels.
- Each time a label is created, play a sound.
- Control the display of the label (i.e. animation block for timing)
- Create the next label only after the previous one has been created, sound played, and displayed. Preferably insert a delay between labels.
What I have now is a For Loop which calls
1: Method A - instantiate the label
2: Method A calls Method B which contains an animation block to a)play the sound then b)animate the display
My problem is that all 10 labels appear so fast that it doesn't look sequential and I only hear the sound once.
How can I chain these together and control the display and timing?

If you aren't using SpriteKit, then this is probably close to what you are looking for:
-(void)managerMethod
{
float timeBetweenEvents = 3.0;
for (int i = 0; i < 10; i++) {
NSObject *someObjectCreatedHere;
[self performSelector:#selector(doSomethingBasedOnThisObject:) withObject:someObjectCreatedHere afterDelay:(i * timeBetweenEvents)];
}
}
-(void)doSomethingBasedOnThisObject:(NSObject*)thisObject{
//do stuff to thisObject
//load stuff from thisObject
//etc
}

Related

Drawing static full screen images using DirectX11

My question is as follows. In most tutorials that I've seen there is a setup part of DirectX11 where you do something like this:
// Set the refresh rate of the back buffer.
if(m_vsync_enabled)
{
swapChainDesc.BufferDesc.RefreshRate.Numerator = numerator;
swapChainDesc.BufferDesc.RefreshRate.Denominator = denominator;
}
else
{
swapChainDesc.BufferDesc.RefreshRate.Numerator = 0;
swapChainDesc.BufferDesc.RefreshRate.Denominator = 1;
}
Which either sets the refresh to be as fast as possible or synched with the monitor.
However in the application that I need I only want to refresh the screen when I tell the system to do it. Is there any way to do this?
These numbers have nothing to do with the actual refreshing, which happens when you invoke Present. You can call it once per second and screen will be refreshed just once.

How to, simply, wait for any layout in iOS?

Before beginning note that this has nothing to do with background processing. There is no "calculation" involved that one would background.
Only UIKit.
view.addItemsA()
view.addItemsB()
view.addItemsC()
Let's say on a 6s iPhone
EACH of these takes one second for UIKit to construct.
This will happen:
THEY APPEAR ALL AT ONCE. To repeat, the screen simply hangs for 3 seconds while UIKit does a massive amount of work. Then they all appear at once.
But let's say I want this to happen:
THEY APPEAR PROGRESSIVELY. The screen simply hangs for 1 second while UIKit builds one. It appears. It hangs again while it builds the next one. It appears. And so on.
(Note "one second" is just a simple example for clarity. See the end of this post for a fuller example.)
How do you do it in iOS?
You can try the following. It does not seem to work.
view.addItemsA()
view.setNeedsDisplay()
view.layoutIfNeeded()
view.addItemsB()
You can try this:
view.addItemsA()
view.setNeedsDisplay()
view.layoutIfNeeded()_b()
delay(0.1) { self._b() }
}
func _b() {
view.addItemsB()
view.setNeedsDisplay()
view.layoutIfNeeded()
delay(0.1) { self._c() }...
Note that if the value is too small - this approach simply, and obviously, does nothing. UIKit will just keep working. (What else would it do?). If the value is too big, it's pointless.
Note that currently (iOS10), if I'm not mistaken: if you try this trick with the trick of a zero delay, it works erratically at best. (As you'd probably expect.)
Trip the run loop...
view.addItemsA()
view.setNeedsDisplay()
view.layoutIfNeeded()
RunLoop.current.run(mode: RunLoop.Mode.default, before: Date())
view.addItemsB()
view.setNeedsDisplay()
view.layoutIfNeeded()
Reasonable. But our recent real life testing shows that this seems to NOT work in many cases.
(ie, Apple's UIKit is now sophisticated enough to smear UIKit work beyond that "trick".)
Thought: is there perhaps a way, in UIKit, to get a callback when it has, basically, drawn-up all the views you've stacked up? Is there another solution?
One solution seems to be .. put the subviews in controllers, so you get a "didAppear" callback, and track those. That seems infantile, but maybe it's the only pattern? Would it really work anyway? (Merely one issue: I don't see any guarantee that didAppear ensures all subviews have been drawn.)
In case this still isn't clear...
Example everyday use case:
• Say there are perhaps seven of the sections.
• Say each one typically takes 0.01 to 0.20 for UIKit to construct (depending on what info you're showing).
• If you just "let the whole thing go in one whack" it will often be OK or acceptable (total time, say 0.05 to 0.15) ... but ...
• there will often be a tedious pause for the user as the "new screen appears". (.1 to .5 or worse).
• Whereas if you do what I am asking about, it will always smooth on to the screen, one chunk at a time, with the minimum possible time for each chunk.
TLDR
Force pending UI changes onto the render server with CATransaction.flush() or split the work across multiple frames using CADisplayLink (example code below).
Summary
Is there perhaps a way, in UIKit, to get a callback when it has drawn-up all the views you've stacked up?
No
iOS acts like a game rendering changes (no matter how many you make) at most once per frame. The only way to guarantee a peice of code runs after your changes have been rendered on screen is to wait for the next frame.
Is there another solution?
Yes, iOS may only render changes once per frame but your app isn't what does that rendering. The window server process is.
Your app does its layout and rendering and then commit its changes to its layerTree to the render server. It will do this automatically at the end of the runloop, or you can force outstanding transactions to be sent to the render server be calling CATransaction.flush().
However, blocking the main thread is bad in general (not just because it blocks UI updates). So if you can you should avoid it.
Possible Solutions
This is the part you are interested in.
1: Do as much as possible on a background queue as you can and improve performance.
Seriously the iPhone 7 is the 3rd most powerful computer (not phone) in my house, only beaten by my gaming PC and Macbook Pro. It is faster than every other computer in my house. It shouldn't take a 3 second pause to render your apps UI.
2: Flush pending CATransactions
EDIT: As pointed out by rob mayoff you can force CoreAnimation to send the pending changes to the render server by calling CATransaction.flush()
addItems1()
CATransaction.flush()
addItems2()
CATransaction.flush()
addItems3()
This won't actually render the changes right there but sends the pending UI updates to the window server, ensuring they are included in the next screen update.
This will work, but comes with these warning in Apples documentation for it.
However, you should attempt to avoid calling flush explicitly. By allowing flush to execute during the runloop...
...and transactions and animations that work from transaction to transaction will continue to function.
However the CATransaction header file includes this quote, which seems to imply that, even if they don't like it, this is officially supported usage.
In some circumstances (i.e. no run-loop, or the run-loop is blocked) it may be necessary to use explicit transactions to get timely render tree updates.
Apple's Documentation - "Better documentation for +[CATransaction flush]".
3: dispatch_after()
Just delay the code until the next runloop. dispatch_async(main_queue) won't work, but you can use dispatch_after() with no delay.
addItems1()
DispatchQueue.main.asyncAfter(deadline: .now() + 0.0) {
addItems2()
DispatchQueue.main.asyncAfter(deadline: .now() + 0.0) {
addItems3()
}
}
You mention in your answer this doesn't work for you anymore. However, it works fine in the test Swift Playground and example iOS app I've included with this answer.
4: Use CADisplayLink
CADisplayLink gets called once per frame and allows you to ensure only one operation runs per frame, guaranteeing the screen will be able to refresh between operations.
DisplayQueue.sharedInstance.addItem {
addItems1()
}
DisplayQueue.sharedInstance.addItem {
addItems2()
}
DisplayQueue.sharedInstance.addItem {
addItems3()
}
Needs this helper class to work (or similar).
// A queue of item that you want to run one per frame (to allow the display to update in between)
class DisplayQueue {
static let sharedInstance = DisplayQueue()
init() {
displayLink = CADisplayLink(target: self, selector: #selector(displayLinkTick))
displayLink.add(to: RunLoop.current, forMode: RunLoopMode.commonModes)
}
private var displayLink:CADisplayLink!
#objc func displayLinkTick(){
if let _ = itemQueue.first {
itemQueue.remove(at: 0)() // Remove it from the queue and run it
// Stop the display link if it's not needed
displayLink.isPaused = (itemQueue.count == 0)
}
}
private var itemQueue:[()->()] = []
func addItem(block:#escaping ()->()) {
displayLink.isPaused = false // It's needed again
itemQueue.append(block) // Add the closure to the queue
}
}
5: Call the runloop directly.
I don't like it because of the possibility for an infinite loop. But, I admit that is unlikely. I'm also not sure if this is officially supported or an Apple engineer is going to read this code and look horrified.
// Runloop (seems to work ok, might lead to infitie recursion if used too frequently in the codebase)
addItems1()
RunLoop.current.run(mode: .default, before: Date())
addItems2()
RunLoop.current.run(mode: .default, before: Date())
addItems3()
This should work, unless (while responding to the runloop events) you do something else to block that runloop call from completing as the CATransaction's are sent to the window server at the end of the runloop.
Example Code
Demonstration Xcode Project & Xcode Playground (Xcode 8.2, Swift 3)
Which option should I use?
I like the solutions DispatchQueue.main.asyncAfter(deadline: .now() + 0.0) and CADisplayLink the best. However, DispatchQueue.main.asyncAfter doesn't guarantee it will run on the next runloop tick so you might not want to trust it?
CATransaction.flush() will force you UI changes to be pushed to the render server and this usage seems to fit Apple's comments for the class, but comes with some warnings attached.
In some circumstances (i.e. no run-loop, or the run-loop is blocked) it may be necessary to use explicit transactions to get timely render tree updates.
Detailed Explanation
The rest of this answer is is background on what's going on inside UIKit and explains why the original answers attempts to use view.setNeedsDisplay() and view.layoutIfNeeded() didn't do anything.
Overview of UIKit Layout & Rendering
CADisplayLink is totally unrelated to UIKit and the runloop.
Not quite. iOS's UI is GPU rendered like a 3D game. And tries to do as little as possible. So a lot of things, like layout and rendering don't happen when something changes but when it is needed. That is why we call ‘setNeedsLayout’ not layout subviews. Each frame the layout might change multiple times. However, iOS will try to only call layoutSubviews once per frame, instead of the 10 times setNeedsLayout might have been called.
However, quite a lot happens on the CPU (layout, -drawRect:, etc...) so how does it all fit together.
Note this is all simplified and skips lots of things like CALayer actually being the real view object that shows on screen not UIView, etc...
Each UIView can be thought of as a bitmap, an image/GPU texture. When the screen is rendered the GPU composites the view hierarchy into the resulting frame we see. It composes the views, rendering the subviews textures over the top of previous views into the finished render that we see on screen (similarly to a game).
This is what has allowed iOS to have such a smooth and easily animated interface. To animate a view across the screen it doesn't have to rerender anything. On the next frame that views texture is just composited in a slightly different place on the screen than before. Neither it, nor the view it was on top of need to have their contents rerendered.
In the past a common performance tip used to be to cut down on the number of views in the view hierarchy by rendering table view cells entirely in drawRect:. This tip was to make the GPU composting step faster on the early iOS devices. However, GPU's are so fast on modern iOS devices now this is no longer worried about very much.
LayoutSubviews and DrawRect
-setNeedsLayout invalidates the views current layout and marks it as needing layout.
-layoutIfNeeded will relayout the view if it doesn't have a valid layout
-setNeedsDisplay will mark the views as needing to be redraw. We said earlier that each view is rendered into a texture/image of the view which can be moved around and manipulated by the GPU without needing to be redrawn. This will trigger it to redraw. The drawing is done by calling -drawRect: on the CPU and so is slower than being able to rely on the GPU, which it can do most frames.
And important thing to notice is what these methods do not do. The layout methods do not do anything visual. Though if the views contentMode is set to redraw, changing the views frame might invalidate the views render (trigger -setNeedsDisplay).
You can try the following all day. It does not seem to work:
view.addItemsA()
view.setNeedsDisplay()
view.layoutIfNeeded()
view.addItemsB()
view.setNeedsDisplay()
view.layoutIfNeeded()
view.addItemsC()
view.setNeedsDisplay()
view.layoutIfNeeded()
From what we've learnt the answer should be obvious why this doesn't work now.
view.layoutIfNeeded() does nothing but recalculate the frames of its subviews.
view.setNeedsDisplay() just marks the view as needing redrawing next time UIKit sweeps through the view hierarchy updating view textures for sending to the GPU. However, is doesn't effect the subviews you tried to add.
In your example view.addItemsA() adds 100 sub views. Those are separate unrelated layers/textures on the GPU until the GPU composites them together into the next framebuffer. The only exception to this is if the CALayer has shouldRasterize set to true. In which case it creates a separate texture for the view and it's sub views and renders (in think on the GPU) the view and it's subviews into a single texture, effectively caching the compositing it would have to do each frame. This has the performance advantage of not needing to compose all its subviews every frame. However, if the view or its subviews change frequently (like during an animation) it will be a performance penalty, as it will invalidate the cached texture frequently requiring it to be redrawn (similar to frequently calling -setNeedsDisplay).
Now, any game engineer would just do this ...
view.addItemsA()
RunLoop.current.run(mode: .default, before: Date())
view.addItemsB()
RunLoop.current.run(mode: .default, before: Date())
view.addItemsC()
Now indeed, that seems to work.
But why does it work?
Now -setNeedsLayout and -setNeedsDisplay don't trigger a relayout or redraw but instead just mark the view as needing it. As UIKit comes through preparing to render the next frame it triggers views with invalid textures or layouts to redraw or relayout. After everything is ready it sends tells the GPU to composite and display the new frame.
So the main run loop in UIKit probably looks something like this.
-(void)runloop
{
//... do touch handling and other events, etc...
self.windows.recursivelyCheckLayout() // effectively call layoutIfNeeded on everything
self.windows.recursivelyDisplay() // call -drawRect: on things that need it
GPU.recompositeFrame() // render all the layers into the frame buffer for this frame and displays it on screen
}
So back to your original code.
view.addItemsA() // Takes 1 second
view.addItemsB() // Takes 1 second
view.addItemsC() // Takes 1 second
So why do all 3 changes show up at once after 3 seconds instead of one at a time 1 second apart?
Well if this bit of code is running as a result of a button press, or similar, it is executing synchronously blocking the main thread (the thread UIKit requires UI changes be made on) and so blocks the run loop on line 1, the even processing part. In effect, you are making that first line of the runloop method take 3 seconds to return.
However, we have determined that the layout won't update until line 3, the individual views won't be rendered until line 4 and no changes will actually appear on screen until the last line of the runloop method, line 5.
The reason that pumping the runloop manually works is because you are basically inserting a call to the runloop() method. Your method is running as a result of being called from within the runloop function
-runloop()
- events, touch handling, etc...
- addLotsOfViewsPressed():
-addItems1() // blocks for 1 second
-runloop()
| - events and touch handling
| - layout invalid views
| - redraw invalid views
| - tell GPU to composite and display a new frame
-addItem2() // blocks for 1 second
-runloop()
| - events // hopefully nothing massive like addLotsOfViewsPressed()
| - layout
| - drawing
| - GPU render new frame
-addItems3() // blocks for 1 second
- relayout invalid views
- redraw invalid views
- GPU render new frame
This will work, as long as it's not used very often because this is using recursion. If it's used frequently every call to the -runloop could trigger another one leading to runaway recursion.
THE END
Below this point is just clarification.
Extra information about what is going on here
CADisplayLink and NSRunLoop
If I'm not mistaken KH it appears that fundamentally you believe "the run loop" (ie: this one: RunLoop.current) is CADisplayLink.
The runloop and CADisplayLink aren't the same thing. But CADisplayLink gets attached to a runloop in order to work.
I slightly misspoke earlier (in the chat) when I said NSRunLoop calls CADisplayLink every tick, It doesn’t. To my understanding NSRunLoop is basically a while(1) loop that’s job is to keep the thread alive, process events, etc... To avoid slipping up I’m going to try to quote extensively from Apple’s own documentation for the next bits.
A run loop is very much like its name sounds. It is a loop your thread enters and uses to run event handlers in response to incoming events. Your code provides the control statements used to implement the actual loop portion of the run loop—in other words, your code provides the while or for loop that drives the run loop. Within your loop, you use a run loop object to "run” the event-processing code that receives events and calls the installed handlers.
Anatomy of a Run Loop - Threading Programming Guide - developer.apple.com
CADisplayLink uses NSRunLoop and needs to be added to one but is different. To quote the CADisplayLink header file:
“Unless paused, it will fire every vsync until removed.”
From: func add(to runloop: RunLoop, forMode mode: RunLoopMode)
And from the preferredFramesPerSecond properties documentation.
Default value is zero, which means the display link will fire at the native cadence of the display hardware.
...
For example, if the maximum refresh rate of the screen is 60 frames per second, that is also the highest frame rate the display link sets as the actual frame rate.
So if you want to do anything timed to screen refreshes CADisplayLink (with default settings) is what you want to use.
Introducing the Render Server
If you happen to block a thread, that has nothing to do with how UIKit works.
Not quite. The reason we are required to only touch UIView’s from the main thread is because UIKit is not thread safe and it runs on the main thread. If you block the main thread you have blocked the thread UIKit runs on.
Whether UIKit works "like you say" {... "send a message to stop video frames. do all our work! send another message to start video again!"}
That’s not what I’m saying.
Or whether it works "like I say" {... ie, like normal programming "do as much as you can until the frames about to end - oh no it's ending! - wait until the next frame! do more..."}
That’s not how UIKit works and I don’t see how it ever could without fundamentally changing its architecture. How is it meant to watch for the frame ending?
As discussed in the “Overview of UIKit Layout & Rendering” section of my answer UIKit tries to do no work upfront. -setNeedsLayout and -setNeedsDisplay can be called as many times per frame as you want. They only invalidate the layout and view render, if it has already been invalidated that frame then the second call does nothing. This means that if 10 changes all invalidate the layout of a view UIKit still only needs to pay the cost of recalculating the layout once (unless you used -layoutIfNeeded in between -setNeedsLayout calls).
The same is true of -setNeedsDisplay. Though as previously discussed neither of these relates to what appears on screen. layoutIfNeeded updates the views frame and displayIfNeeded updates the views render texture, but that is not related to what appears on screen. Imagine each UIView has a UIImage variable that represents it’s backing store (it’s actually in CALayer, or below, and isn’t a UIImage. But this is an illustration). Redrawing that view simply updates the UIImage. But the UIImage is still just data, not a graphic on screen until it is drawn onto the screen by something.
So how does a UIView get drawn on screen?
Earlier I wrote pseudo code UIKit’s main render runloop. So far in my answers I have been ignoring a significant part of UIKit, not all of it runs inside your process. A surprising amount of UIKit stuff related to displaying things actually happens in the render server process not your apps process. The render server/window server was SpringBoard (the home screen UI) until iOS 6 (since then then BackBoard and FrontBoard have absorbed a lot of SpringBoards more core OS related features, leaving it to focus more on being the main operating system UI. Home screen/lock screen/notification center/control center/app switcher/etc...).
The pseudo code for UIKit’s main render runloop is likely closer to this. And again, remember UIKit’s architecture is designed to do as little work as possible so it will only do this stuff once per frame (unlike network calls or whatever else the main runloop might also manage).
-(void)runloop
{
//... do touch handling and other events, etc...
UIWindow.allWindows.layoutIfNeeded() // effectively call layoutIfNeeded on everything
UIWindow.allWindows.recursivelyDisplay() // call -drawRect: on things that need to be rerendered
// Sends all the changes to the render server process to actually make these changes appear on screen
// CATransaction.flush() which means:
CoreAnimation.commit_layers_animations_to_WindowServer()
}
This makes sense, a single iOS app freezing shouldn’t be able to freeze the entire device. In fact we can demonstrate this on an iPad with 2 apps running side by side. When we cause one to freeze the other is unaffected.
These are 2 empty app templates I created and pasted the same code into both. Both should the current time in a label in the middle of the screen. When I press freeze it calls sleep(1) and freezes the app. Everything stops. But iOS as a whole is fine. The other app, control center, notification center, etc... are all unaffected by it.
Whether UIKit works "like you say" {... "send a message to stop video frames. do all our work! send another message to start video again!"}
In the app there is no UIKit stop video frames command because your app has no control over the screen at all. The screen will update at 60FPS using whatever frame the window server gives it. The window server will composite a new frame for the display at 60FPS using the last known positions, textures and layer trees your app gave it to work with.
When you freeze the main thread in your app the CoreAnimation.commitLayersAnimationsToWindowServer() line, which runs last (after your expensive add lots of views code), is blocked and doesn’t run. As a result even if there are changes, the window server hasn’t been sent them yet and so just continues to use the last state it was sent for your app.
Animations is another part of UIKit that runs out of process, in the window server. If, before the sleep(1) in that example app, we start a UIView animation first we will see it start, then the label will freeze and stop updating (because sleep() has run). However, even though the apps main thread is frozen the animation will continue regardless.
func freezePressed() {
var newFrame = animationView.frame
newFrame.origin.y = 600
UIView.animate(withDuration: 3, animations: { [weak self] in
self?.animationView.frame = newFrame
})
// Wait for the animation to have a chance to start, then try to freeze it
DispatchQueue.main.asyncAfter(deadline: .now() + 0.1) {
NSLog("Before freeze");
sleep(2) // block the main thread for 2 seconds
NSLog("After freeze");
}
}
This is the result:
In fact we can go one better.
If we change the freezePressed() method to this.
func freezePressed() {
var newFrame = animationView.frame
newFrame.origin.y = 600
UIView.animate(withDuration: 4, animations: { [weak self] in
self?.animationView.frame = newFrame
})
// Wait for the animation to have a chance to start, then try to freeze it
DispatchQueue.main.asyncAfter(deadline: .now() + 0.2) { [weak self] in
// Do a lot of UI changes, these should completely change the view, cancel its animation and move it somewhere else
self?.animationView.backgroundColor = .red
self?.animationView.layer.removeAllAnimations()
newFrame.origin.y = 0
newFrame.origin.x = 200
self?.animationView.frame = newFrame
sleep(2) // block the main thread for 2 seconds, this will prevent any of the above changes from actually taking place
}
}
Now without the sleep(2) call the animation will run for 0.2 seconds then it’ll be canceled and the view will be moved to a different part of the screen a different color. However, the sleep call blocks the main thread for 2 seconds meaning none of these changes are sent to the window server until most of the way through the animation.
And just to confirm here is the result with the sleep() line commented out.
This should hopefully explain what’s going on. These changes are like the UIView’s you add in your question. They are queued up to be included in the next update, but because you are blocking the main thread by sending so many in one go you are stopping the message being sent which will get them included in the next frame. The next frame isn’t being blocked, iOS will produce a new frame showing all the updates it has received from SpringBoard, and other iOS app. But because your app is still blocking it’s main thread iOS hasn’t received any updates from your app and so won’t show any change (unless it has changes, like animations, already queued up on the window server).
So to summarise
UIKit tries to do as little as possible so batches changes to layout and rendering up into one go.
UIKit runs on the main thread, blocking the main thread prevents UIKit doing anything until that operation has completed.
UIKit in process can’t touch the display, it sends layers and updates to the window server every frame
If you block the main thread then the changes are never sent to the window server and so aren’t displayed
The window server has final control of what appears on screen. iOS only sends updates to the window server when the current CATransaction is committed. To make this happen when it is needed, iOS registers a CFRunLoopObserver for the .beforeWaiting activity on the main thread's run loop. After handling an event (presumably by calling into your code), the run loop calls the observer before it waits for the next event to arrive. The observer commits the current transaction, if there is one. Committing the transaction includes running the layout pass, the display pass (in which your drawRect methods are called), and sending the updated layout and contents to the window server.
Calling layoutIfNeeded performs layout, if needed, but doesn't invoke the display pass or send anything to the window server. If you want iOS to send updates to the window server, you must commit the current transaction.
One way to do that is to call CATransaction.flush(). A reasonable case to use CATransaction.flush() is when you want to put a new CALayer on the screen and you want it to have an animation immediately. The new CALayer won't be sent to the window server until the transaction is committed, and you can't add animations to it until it's on the screen. So, you add the layer to your layer hierarchy, call CATransaction.flush(), and then add the animation to the layer.
You can use CATransaction.flush to get the effect you want. I don't recommend this, but here's the code:
#IBOutlet var stackView: UIStackView!
#IBAction func buttonWasTapped(_ sender: Any) {
stackView.subviews.forEach { $0.removeFromSuperview() }
for _ in 0 ..< 3 {
addSlowSubviewToStack()
CATransaction.flush()
}
}
func addSlowSubviewToStack() {
let view = UIView()
// 300 milliseconds of “work”:
let endTime = CFAbsoluteTimeGetCurrent() + 0.3
while CFAbsoluteTimeGetCurrent() < endTime { }
view.translatesAutoresizingMaskIntoConstraints = false
view.heightAnchor.constraint(equalToConstant: 44).isActive = true
view.backgroundColor = .purple
view.layer.borderColor = UIColor.yellow.cgColor
view.layer.borderWidth = 4
stackView.addArrangedSubview(view)
}
And here's the result:
The problem with the above solution is that it blocks the main thread by calling Thread.sleep. If your main thread doesn't respond to events, not only does the user get frustrated (because your app isn't responding to her touches), but eventually iOS will decide that the app is hung and kill it.
The better way is simply to schedule the addition of each view when you want it to appear. You claim “it's not engineering”, but you are wrong, and your given reasons make no sense. iOS generally updates the screen every 16⅔ milliseconds (unless your app takes longer than that to handle events). As long as the delay you want is at least that long, you can just schedule a block to be run after the delay to add the next view. If you want a delay of less than 16⅔ milliseconds, you cannot in general have it.
So here's the better, recommended way to add the subviews:
#IBOutlet var betterButton: UIButton!
#IBAction func betterButtonWasTapped(_ sender: Any) {
betterButton.isEnabled = false
stackView.subviews.forEach { $0.removeFromSuperview() }
addViewsIfNeededWithoutBlocking()
}
private func addViewsIfNeededWithoutBlocking() {
guard stackView.arrangedSubviews.count < 3 else {
betterButton.isEnabled = true
return
}
self.addSubviewToStack()
DispatchQueue.main.asyncAfter(deadline: .now() + .milliseconds(300)) {
self.addViewsIfNeededWithoutBlocking()
}
}
func addSubviewToStack() {
let view = UIView()
view.translatesAutoresizingMaskIntoConstraints = false
view.heightAnchor.constraint(equalToConstant: 44).isActive = true
view.backgroundColor = .purple
view.layer.borderColor = UIColor.yellow.cgColor
view.layer.borderWidth = 4
stackView.addArrangedSubview(view)
}
And here's the (identical) result:
It is kind of a solution. But it's not engineering.
Actually, yes it is. By adding the delay, you are doing exactly what you said you wanted to do: you are permitting the runloop to complete and layout to be performed, and re-entering on the main thread as soon as that's done. That, in fact, is one of my main uses of delay. (You might even be able to use a delay of zero.)
3 methods that might work below. The first I could make it work if a subview is adding the controller as well if it is not directly in the view controller.The second is a custom view :) It seems you are wondering when layoutSubviews is finished on the view to me. This continuous process is what is freezing the display because of the 1000 subviews plus sequentially. Depending on your situation you can add a childviewcontroller view and post a notification when viewDidLayoutSubviews() is finished but I don't know if this fits your use case. I tested with 1000 subs on the viewcontroller view being added and it worked. In that case a delay of 0 will do exactly what you want. Here is a working example.
import UIKit
class TrackingViewController: UIViewController {
var layoutCount = 0
override func viewDidLoad() {
super.viewDidLoad()
// Add a bunch of subviews
for _ in 0...1000{
let view = UIView(frame: self.view.bounds)
view.autoresizingMask = [.flexibleWidth,.flexibleHeight]
view.backgroundColor = UIColor.green
self.view.addSubview(view)
}
}
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
print("Called \(layoutCount)")
if layoutCount == 1{
//finished because first call was an emptyview
NotificationCenter.default.post(name: NSNotification.Name(rawValue: "kLayoutFinished"), object: nil)
}
layoutCount += 1
} }
Then in your main View Controller that you are adding subviews you could do this.
import UIKit
class ViewController: UIViewController {
var y :CGFloat = 0
var count = 0
override func viewDidLoad() {
super.viewDidLoad()
// Do any additional setup after loading the view, typically from a nib.
NotificationCenter.default.addObserver(self, selector: #selector(ViewController.finishedLayoutAddAnother), name: NSNotification.Name(rawValue: "kLayoutFinished"), object: nil)
}
override func viewDidAppear(_ animated: Bool) {
super.viewDidAppear(animated)
DispatchQueue.main.asyncAfter(deadline: DispatchTime.now() + 4, execute: {
//add first view
self.finishedLayoutAddAnother()
})
}
deinit {
NotificationCenter.default.removeObserver(self, name: NSNotification.Name(rawValue: "kLayoutFinished"), object: nil)
}
func finishedLayoutAddAnother(){
print("We are finished with the layout of last addition and we are displaying")
addView()
}
func addView(){
// we keep adding views just to cause
print("Fired \(Date())")
if count < 100{
DispatchQueue.main.asyncAfter(deadline: DispatchTime.now() + 0.0, execute: {
// let test = TestSubView(frame: CGRect(x: self.view.bounds.midX - 50, y: y, width: 50, height: 20))
let trackerVC = TrackingViewController()
trackerVC.view.frame = CGRect(x: self.view.bounds.midX - 50, y: self.y, width: 50, height: 20)
trackerVC.view.backgroundColor = UIColor.red
self.view.addSubview(trackerVC.view)
trackerVC.didMove(toParentViewController: self)
self.y += 30
self.count += 1
})
}
}
}
Or there is an EVEN crazier way and probably better way. Create your own view that in a sense keeps its own time and calls back when it is good to not drop frames. This is unpolished but would work.
import UIKit
class CompletionView: UIView {
private var lastUpdate : TimeInterval = 0.0
private var checkTimer : Timer!
private var milliSecTimer : Timer!
var adding = false
private var action : (()->Void)?
//just for testing
private var y : CGFloat = 0
private var x : CGFloat = 0
//just for testing
var randomColors = [UIColor.purple,UIColor.gray,UIColor.green,UIColor.green]
init(frame: CGRect,targetAction:(()->Void)?) {
super.init(frame: frame)
action = targetAction
adding = true
for i in 0...999{
if y > bounds.height - bounds.height/100{
y -= bounds.height/100
}
let v = UIView(frame: CGRect(x: x, y: y, width: bounds.width/10, height: bounds.height/100))
x += bounds.width/10
if i % 9 == 0{
x = 0
y += bounds.height/100
}
v.backgroundColor = randomColors[Int(arc4random_uniform(4))]
self.addSubview(v)
}
}
required init?(coder aDecoder: NSCoder) {
fatalError("init(coder:) has not been implemented")
}
func milliSecCounting(){
lastUpdate += 0.001
}
func checkDate(){
//length of 1 frame
if lastUpdate >= 0.003{
checkTimer.invalidate()
checkTimer = nil
milliSecTimer.invalidate()
milliSecTimer = nil
print("notify \(lastUpdate)")
adding = false
if let _ = action{
self.action!()
}
}
}
override func layoutSubviews() {
super.layoutSubviews()
lastUpdate = 0.0
if checkTimer == nil && adding == true{
checkTimer = Timer.scheduledTimer(timeInterval: 0.01, target: self, selector: #selector(CompletionView.checkDate), userInfo: nil, repeats: true)
}
if milliSecTimer == nil && adding == true{
milliSecTimer = Timer.scheduledTimer(timeInterval: 0.001, target: self, selector: #selector(CompletionView.milliSecCounting), userInfo: nil, repeats: true)
}
}
}
import UIKit
class ViewController: UIViewController {
var y :CGFloat = 30
override func viewDidLoad() {
super.viewDidLoad()
// Wait 3 seconds to give the sim time
DispatchQueue.main.asyncAfter(deadline: DispatchTime.now() + 3, execute: {
[weak self] in
self?.addView()
})
}
var count = 0
func addView(){
print("starting")
if count < 20{
let completionView = CompletionView(frame: CGRect(x: 0, y: self.y, width: 100, height: 100), targetAction: {
[weak self] in
self?.count += 1
self?.addView()
print("finished")
})
self.y += 105
completionView.backgroundColor = UIColor.blue
self.view.addSubview(completionView)
}
}
}
Or Finally,you could do the callback or notification in viewDidAppear but it also seems that any code executed on the callback would need to be wrapped in to execute in a timely manner from the viewDidAppear callback.
DispatchQueue.main.asyncAfter(deadline: DispatchTime.now() + 0.0, execute: {
//code})
Use NSNotification to achieve needed effect.
First - register an observer to the main view and create observer handler.
Then, initialize all these A,B,C... objects in separate thread (background, for instance) by, for instance, self performSelectorInBackground
Then - post notification from subviews and the last - performSelectorOnMainThread to add subview in desired order with needed delays.
To answer the questions in comments, let's say you have a UIViewController that was shown on the screen. This object - not a point of discussion and you can decide where to put the code, controlling view appearance. The code is for the UIViewController object (so, it is self). View - some UIView object, considered as a parent view. ViewN - one of subviews. It can be scaled later.
[[NSNotificationCenter defaultCenter] addObserver:self
selector:#selector(handleNotification:)
name:#"ViewNotification"
object:nil];
This registerd an observer - needed to communicate between threads.
ViewN * V1 = [[ViewN alloc] init];
Here - subviews can be allocated - not shown yet.
- (void) handleNotification: (id) note {
ViewN * Vx = (ViewN*) [(NSNotification *) note.userInfo objectForKey: #"ViewArrived"];
[self.View performSelectorOnMainThread: #selector(addSubView) withObject: Vx waitUntilDone: FALSE];
}
This handler allows to receive messages and place UIViewobject to the parent view. Looks strange, but the point is - you need to execute addSubview method on the main thread to take effect. performSelectorOnMainThread allows to start adding subview on main thread without blocking application execution.
Now - we make a method that will place subviews to the screen.
-(void) sendToScreen: (id) obj {
NSDictionary * mess = [NSDictionary dictionaryWithObjectsAndKeys: obj, #"ViewArrived",nil];
[[NSNotificationCenter defaultCenter] postNotificationName: #"ViewNotification" object: nil userInfo: mess];
}
This method will post notification from any thread, sending an object as NSDictionary item named ViewArrived.
And finally - views that have to be added with 3 seconds delay:
-(void) initViews {
ViewN * V1 = [[ViewN alloc] init];
ViewN * V2 = [[ViewN alloc] init];
ViewN * V3 = [[ViewN alloc] init];
[self performSelector: #selector(sendToScreen:) withObject: V1 afterDelay: 3.0];
[self performSelector: #selector(sendToScreen:) withObject: V2 afterDelay: 6.0];
[self performSelector: #selector(sendToScreen:) withObject: V3 afterDelay: 9.0];
}
It is not the only one solution. It is also possible to control subviews of the parent view by counting the NSArray subviews property.
In any case, you can run initViews method whenever you need and even in background thread and it allows to control subview appearance, performSelector mechanism allows to avoid execution thread blocking.

UITextField input every time new iteration

I'm new to Objective-C and Xcode, and I have one problem, I tried looking in the Internet, but didn't find anything.
I have "game" and there I have a screen with two text fields, button and text view.User inputs integer values and taps the button. After tapping the button some functions(or, methods) are called. Method that is called after typing the button:
- (IBAction)okButtonTapped:(id)sender {
int save1=100;
int save2=100;
int save13=1;
int save22=1;
int save12=1;
int save23=1;
while(save13 !=0 && save23 !=0){
[self yourturn:&save1 heap2:&save2];
save12= save1;
save22=save2;
[self compturn:&save12 heap2:&save22];
save13=save12;
save23=save22;
save1=save13;
save2=save23;
}
}
Here some methods are called. And in this methods I use this code to save values from textfields that user inputs:
_heapNumberInt=[self.heapNumberTextField.text intValue];
_thingsNumberInt=[self.thingsNumberTextField.text intValue];
And the question is how to make users input new values in the textfield every time when there is new iteration in while loop?
Sorry for my English(it's not my native language) and for my long question.
All project you can download here
P.S. "game" is very simple: there are 2 heaps with 100 things each, user chooses his turn and then he inputs values: heap number(1 or 2 heap) and number of things he wants to take from the heap. Then there is computer's turn. And looser is someone who can't take things from any heap. It is real game called NIM.(but here I made only 2 heaps(not 3)).
Probably you need to read Event Handling Guide
https://developer.apple.com/library/ios/documentation/EventHandling/Conceptual/EventHandlingiPhoneOS/Introduction/Introduction.html#//apple_ref/doc/uid/TP40009541
About the question, for setting focus to the input you should use
[self.heapNumberTextField becomeFirstResponder];
UPDATE:
As I understand you need to:
_heapNumberInt = [self.heapNumberTextField.text intValue]; // get value
[self.heapNumberTextField setEditable:NO]; // disable editing to calculate
[self calculate];
self.heapNumberTextField.text = #""; // clean UITextField
[self.heapNumberTextField setEditable:YES]; // allow editing
[self.heapNumberTextField becomeFirstResponder]; // set focus to the textfield

How to wait for button press in objective c

I have an array of objects (scaleNotes) that are assigned to buttons that I would like to iterate through. I want the app to wait for the first set of buttons to be pressed, then to wait for the second, and so on. However, with the function I currently have the app freezes.
The method that contains the array:
-(void)fingerScale :(UIButton*)button1 :(UIButton*)button2 :(UIButton*)button3 :(UIButton*)button4 :(UILabel*)label {
Note *note = [[Note alloc]init];
for (int i = 0; i < [_scaleNotes count]; i++) {
note = _scaleNotes[i];
label.text = note.noteName;
[note waitForNote:button1 :button2 :button3 :button4 :note];
NSLog(#"Waiting... %i", i);
}
}
The "waitForNote" method:
-(void)waitForNote:(UIButton *)button1 :(UIButton *)button2 :(UIButton *)button3 :(UIButton *)button4 :(Note*)Note {
bool loop = YES;
while (loop) {
switch ([Note.fingering count]) {
case 0:
loop = NO;
break;
case 1:
button1 = Note.fingering[0];
if (button1.touchInside) {
loop = NO;
}
break;
case 2:
button1 = Note.fingering[0];
button2 = Note.fingering[1];
if (button1.touchInside && button2.touchInside) {
loop = NO;
}
break;
case 3:
button1 = Note.fingering[0];
button2 = Note.fingering[1];
button3 = Note.fingering[2];
if (button1.touchInside && button2.touchInside && button3.touchInside) {
loop = NO;
}
break;
default:
break;
}
}
}
I have been told that using addTarget:action:forControlEvents may solve my problem instead of using a while loop, but I am unsure about how to implement that into my code. Please help.
Your while loop is an infinite loop, and that's why your app appears to freeze. Most GUI systems -- iOS included -- won't work that way. You have to give the app's event loop, or run loop, time to gather and process events.
-addTarget:action:forControlEvents: will be part of the solution, but you really need to spend some time learning more about how apps and controls work in general. Briefly, your controls should be connected to appropriate actions; if you want to enforce some order for the buttons you might enable or disable some buttons as necessary.
To expand on Caleb's answer a little bit:
iOS, like most modern interactive OS'es, is event-driven.
You write code that responds to events. The OS detects events, and then invokes the methods in your app that respond to those events.
You do NOT write a while loop that keeps looping, waiting for things to happen.
For buttons, you create methods of type IBAction, and you connect them to your buttons (usually connected to a "touch up inside" event.) Then, when the user taps and releases a button, the system calls your action method.
For a slider, you would write an action method and attach it to the "value changed" event for the slider. Then, when the user changed the value of the slider the system would call you.
So for your buttons you would write an action method and attach it to your buttons. (It's more common to create buttons and attach them to actions in Interface Builder, but you can also create them in code and then attach them using the -addTarget:action:forControlEvents: method you mentioned.)
If you've got multiple buttons that do the same thing but with different values, you might want to attach all the buttons to the same IBAction method, and then put different tag values on each button. Then in your IBAction method, look at the tag on the sender (The button that invoked the action) and use that to figure out which button was pressed.

Loop activated on mouse movement

I'm just going to explain the context so it is clearer.
I made this menu : my menu
I am looking to make an improved and more advanced version of the same menu.
I made an animation of waves on the cofee's surface and am looking to make it loop when the mouse is moving and to stop looping when it's not.
Sorry for the lack of specifications as I am quite new to actionscript, but I hope somebody will be able to help me. :)
Thanks,
Mathieu
Well, you said it - leverage MouseEvent.MOUSE_MOVE to set a conditional in your looping routine.
private var _isMoving:Boolean = false;
stage.addEventListener(MouseEvent.MOUSE_MOVE, checkMouse);
this.addEventListener(Event.ENTER_FRAME, doLoop);
private function checkMouse(e:MouseEvent):void
{
_isMoving = true;
}
private function doLoop(e:Event):void
{
trace("moving =" + _isMoving);
if(_isMoving)
{
// loop animation
}
_isMoving = false;
}
depending on how you want it to work I would do this as follows:
create an animation of wavy coffee
ensure the animation loops
note that clips loop by default, so all you have to do is match the first and last frames!
place the clip at the edge of your current coffee graphic
double click on the graphic to edit it
drag an instance of the looping animation from the library onto the "edge" of the graphic
OR just replace your entire light brown graphic with an animated one that loops
when the mouse is moving, call play on the animated loop clip
when the mouse stops, call stop on the animated loop clip
Some example code would be along the lines of:
public function init():void {
menuClip.addEventListener(MouseEvent.MOUSE_OVER, onMenuRollOver);
menuClip.addEventListener(MouseEvent.MOUSE_OUT, onMenuRollOut);
}
public function onMenuRollOver(event:MouseEvent):void {
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
/* do the stuff you're currently doing to animate the clip here.
something like: coffee graphic height = ease to mouseHeight */
}
public function onMenuRollOut(event:MouseEvent):void {
/* do the stuff you're currently doing to stop the clip here. */
stage.removeEventListener(MouseEvent.MOUSE_MOVE, onMove);
coffeeClip.stop();
}
public function onMove(event:MouseEvent):void {
resetTimer();
coffeeClip.play(); //note: play has no effect when movie is playing (that's ideal in this case)
}
public function resetTimer():void {
if(mouseMovementTimer == null) createTimer();
mouseMovementTimer.reset();
mouseMovementTimer.start();
}
public function createTimer():Timer {
mouseMovementTimer = new Timer(DELAY, 1); //fiddle with the delay variable. Try 500, at first
mouseMovementTimer.addEventListener(TimerEvent.TIMER, stopAnimationLoop);
}
public function stopAnimationLoop(event:TimerEvent):void {
mouseMovementTimer.removeEventListener(TimerEvent.TIMER, stopAnimationLoop); //optional but recommended
mouseMovementTimer = null;
coffeClip.stop();
}
Of course, you would need to do things like call init() and import flash.utils.Timer and initialize variables like mouseMovementTimer, menuClip, coffeeClip and DELAY.
Warning: This code is off the top of my head and untested. So there's likely to be small bugs in it but you should get the general idea:
add a mouse listener when the user mouses over the menu
remove that listener if the user mouses out of the menu
have that listener play the looping movie clip
trigger an event that will stop the looping clip if movement hasn't been detected in a while
once the trigger goes of, stop the clip
The key is in detecting when the mouse stops moving. Flash detects interaction well but does not detect NON-INTERACTION for obvious reasons. One easy way to solve that is to trigger a timer that will go off once too much time has elapsed since the last activity. Then, when the timer triggers, you know action has stopped!
I think that's the key piece to solving your problem. I hope that helps someone in some way.
~gmale

Resources