Here is the point: I've got an app that runs with a set of images in very low resolution. Nothing special here.
When the app starts, I'd like it starts the synch download of full resolution photos set process (photos are downloaded off a remote server).
As the file is typically large (>1Gb), I need a way to resume from a potential stop (whatever the reasons), so that it eventually have 100% of photo set on the device without having to start over from the start.
How would you do that?
Your question does not tells about the data in details. There are 2 cases possible :
You are downloading all the images as a single file(like .zip) or in a single request : In this case you can use NSURLSession which has the pause and resume facility inbuilt.
You are downloading the images one by one : In this case you need to have track of the images with some id or index to start the download from a particular file in a sequential manner. For each file pause and resume facility you can use NSURLSession.
Related
I want to use NSURLSession to upload photos to cloud server(like OneDrive) and I hope the app can do works in background.
But NSURLSession just support "fromFile" not "fromData" in background mode, and I don't know how to get the NSURL of photos, so I write the photo's data into a file...
I think this is not a good way.
From the comments above, it seems like you'll be uploading several photos at a time and for that a "fromData" approach does not seem like a good idea.
Firstly, high resolution photos have several megabytes in size. If your loading a 5mb photo into memory, using NSData, you're probably fine. But loading 10 photos would then mean you'd need 50mb of memory to hold them all.
Secondly, uploading large chunks of data, such as photos, is also a computationally intensive task. You should most definitely not try to upload them all at the same time. This means you're going to have to build an upload queue that only starts uploading the next photo once the last one has finished. What happens then if internet connectivity is lost midway through the process? And what happens if the user closes the app all of the sudden?
Thus, I'd suggest you grab all the images' data and write them to a temporary folder somewhere. Then you start the upload process, which would find a file on the temporary folder, upload it, delete it once the upload finishes successfully and start over with the next file.
This way you're minimising your app's memory footprint, making it more resilient in the face of the many adversities an app may face (no internet connection, being prematurely closed by the user and so on) and also abiding by the APIs that are provided to you.
My app is downloading large 90 MB video files from a server. Many customers in rural areas complain about inability to download them. Downloads always restart from scratch when the connection breaks for too long.
Is there a library that can download large files in very low and interrupted bandwidth conditions over the course of several days if necessary? Such that it resumes an unfinished download and keeps adding bit by bit until it is complete?
It has to be very, very robust.
NSURLSession supports this. When a download fails you can obtain an object that can be used to resume the download later. Read the doc for more infos.
You can also make use of a background session if you want to perform a long download in the background. See the doc and this question : NSURLSession background download - resume over network failure
Scenario:
As a user I am able to take (an unlimited amount of) photos and videos which are stored in the apps documents folder. Each of these media files gets a record within a Sqlite database with additional information (for exeample a caption). All this is possible to do completely offline.
Back online I get a dialog with a list of all the videos and photos I took and a button which starts an upload process.
Each file is uploaded after the other together with its metadata by making a multipart POST request to the server. The response of the server is stored together with the metadata in the Sqlite database (so there is no fire and forget).
Reliable solutions?
If I am reading and understanding this chart correctly, the most simple solution would be to wrap each of these uploads within a Task. Side effect: after 10 minutes every task would be cancelled, which becomes a problem by having a slow connection or very large files (for example a very long video).
The recommended way would be to use NSUrlSession/Background transfer service.
Which leads me to my question:
Is it possible to wrap multipart POSTs in NSURLSessionDataTasks and would this be reliable, even if the task is running longer than 10 minutes or the user is suspending the app?
As I am a Xamarin/C# guy I would really appreciate some sample snippets for a working multipart upload, even if it's in Objective-C ;-).
Almost and... yes.
Background Transfer service works with NSUrlSessionDownloadTasks and NSUrlSessionUploadTasks only. Not NSUrlSessionDataTasks, as described here.
Other than this "basic" limitation, it's safe to use background transfer service with upload tasks.
The 10-minute-freepass-in-the-background no longer applies on iOS 7 (basically, it's there, but different), however, with NSURLSession and background transfer service you do not need it.
I've a blog post here for background transfer service, based on download tasks.
An important thing to note is that, starting a task basically means that it will actually start sometime and actually finish some other time. This depends on whether the device is on cellular or Wi-Fi and other factors which are (probably) only known to iOS (and Apple).
I've got an app that currently ships with all the videos it can play embedded in it. This doesn't scale well, and unless you want to play all the movies, wastes disk space. It also makes it less desirable to upgrade the app because you have to re-download all movies.
What I would like to do is download the movie on the fly, play it back while downloading, and then if it's successfully downloaded, save it to the file system so that next time they want to watch it, it streams from the local file.
I can do whatever is needed to the video, but currently I'm serving it up as an .mp4 file from Amazon S3, with a mimetype of video/mp4, and so the first half of my issue works fine: the movie downloads, and MPMovieViewController will start playing it as soon as it thinks it has downloaded "enough."
Is there any way to tap into the cache of that video file so that I can save it and control how long it resides on the filesystem? This seems like it would be the easiest approach.
I am targeting iOS 5+6, but if the only solution available required iOS 6, I would consider it also. Thanks!
UPDATE: Using AFNetworking, I am now half-way there, I think. I am downloading the video file from the server, and listening for the download progress. Once I see 25% of the video has been downloaded, I start playback on the local file using an MPMoviePlayerController.
The main issue I'm running into now is playback seems to get screwed up. It's going along fine, 25% downloaded, playback starts... download continues normally... then the file finishes downloading completely, and shortly thereafter video freezes. The onscreen playback timer still indicates playback is ongoing and I don't see any "playback finished" type notifications, but the video is frozen. My guess based on the behavior is that perhaps the initial buffer for the video playback was used up, and it isn't detecting that more video is available on disk now?
Is there any way to interact with MPMoviePlayerController to let it know periodically to refresh the buffer it's playing out of? Or some other way to handle this situation?
UPDATE: Make sure to see the newer answer from #TomHamming.
I have yet to find a conclusive answer, but at this time I believe the answer is: you can't reliably do this. At least not without a lot of work which seems too much like a hack. I filed a feature request with Apple as it really seems like this should be possible with some adjustments to MPMoviePlayerController.
I will go over the variety of things I tried or considered, and the results I encountered.
Pass MPMoviePlayerController a URL to your movie file, which allows it to stream, and then pull the file out of the cache it was saved into, into your local Documents folder. Won't work, as of iOS 6. I filed a feature request with Apple, but as it stands now there's no way to get your hands on the file they are downloading, AFAIK.
Start downloading the movie file with NSURLConnection (or something like AFNetwork), and then when a "decent amount" has been downloaded to the device, pass the file URL to the MPMoviePlayerController and let it stream from disk. Sort of works, but not well. Three problems:
It's really hard to know when to start playing the file. I haven't figured out the algorithm Apple uses, and so I always erred on the side of caution, waiting for 25% to be downloaded before playing.
The MPMoviePlayerController interface provides no sense of the movie being streamed, as it does when Apple is doing the calculations via the network. It appears to the user that the file is totally downloaded when it really is not.
And most importantly, MPMoviePlayerController seems to not work well with playing a file that is not completely downloaded. I experienced playback problems once the file finished downloading, or if the player caught up with the amount downloaded, and never found a graceful way to handle these situations.
Same procedure as above, but use AVFoundation classes to more finely control the playback process, and avoid the issues described above regarding playback stopping, etc. Might work, but I want all the features of MPMoviePlayerController. Re-implementing MPMoviePlayerController myself just to get this one feature seems like a waste of time.
Same procedure as #1 above, but run a small web server in your app to handle streaming the video from the disk to MPMoviePlayerController, with the hope being that the streaming would work more like it normally does when streaming the file directly from an external web server. Works, but results were still sporadic and performance seemed to suffer. I did my test with CocoaHTTP. I decided against this approach because it just felt like a terrible hack.
Run a lightweight HTTP proxy, thus intercepting the downloaded movie file data as it gets streamed from the internet into your MPMoviePlayerController. Not sure if this works or not. I was not able to test this yet, as I have not found a lightweight HTTP proxy written in Objective-C, and at this point don't feel like implementing one just to try this experiment. It seems like the next easiest of all these hacks to implement -- if you don't have to write the proxy!
At this point I've decided to go the less-hacky, but also less user-friendly route of simply downloading the file completely, and then passing it to MPMoviePlayerController, until a better solution comes along.
You can do this as of iOS 10 with AVAssetDownloadTask. See this WWDC 2016 session and this documentation.
Alternatively, if your movie isn't DRM'd, you can do it with AVAssetResourceLoaderDelegate, which effectively lets you give an AVPlayer an arbitrary stream of bytes. See this walkthrough.
I am working on an app where I need to download lots of images locally (so that they are available offline). The number of images can be 100 - 10,000. Each image may vary from 100K- 250K
I can do this via a NSOperationQueue and I have the code to make this work already but this question is more of a conceptual nature. I am not sure what is the best approach to take here.
1) Do I download all images as soon as the user logs in for the first time ? Based on the number of images, this could take a long time and what if the user closes the app meanwhile. I understand there is a limit on the time that can be spent by a background process in this case? Honestly, I dont want to do anything in the background (ie when app is closed)
2) Do I download images when a particular category is selected by the user? If a category has 800 images, then what happens if the user selects another category before all of those 800 images are finished downloading? I can always start threaded downloaded but will the thread keep on running if the user selects another category ?
3) Put something in "Settings" to let the user decide this themselves. Something like "Total Images: 8000" Images Available : 2000 and a button to say "Download All" which would display a UIProgressView of what's going on....so the user will probably wait till it's all done.
Or some other approach?
Thoughts?
As far as I understand from your description, including comments, I think that the best approach would be downloading all of your images in a thread and make the download process resumable. In this way, you are going to mirror a remote database of images for offline use.
What this entails is:
you keep track of which images you have downloaded;
each time the app starts/resumes, you start the downloading thread exactly from where you left;
you should also provide a mechanism so that the user is suitably informed when he is trying to access an image which has not been downloaded yet, but I think this should be no problem (you might also provide a progress indicator somewhere).
I would only download the image when the user actually needs to do something with the image. Your users will hate you if you download all the images upfront. :)