Here are my example folders and documents
c:\b.odt
c:\myfolder
c:\myfolder\a.odt
I would like to create a hyperlink in a.odt that references b.odt
The direct path for the hyper link will look like this: c:\b.odt
However different people will have different paths. However, b.odt will always be in the same directory as myfolder.
I tried to use ./ but it wasn't working.
Is there a way I can make a hyperlink without the direct path?
https://forum.openoffice.org/en/forum/viewtopic.php?f=7&t=54592
Make sure you select the Document option in the Hyperlink dialog (as opposed to Internet. You may also have to preface with "file://" and/or apply the relative links setting in Options -> Load/Save -> General.
Related
How can I prevent replacing the existing file with a new file which has the same name, when I upload file to one drive?
I am using PUT /me/drive/items/{parent-id}:/{filename}:/content docs end point.
I instead need to keep indexing (test.jpg, test (1).jpg) or, just like google drive does, add two files with the same name.
You can control this behavior using Instance Attributes, specifically the #microsoft.graph.conflictBehavior query parameter. There are three supported conflict behaviors; fail, replace (the default), and rename.
The conflict resolution behavior for actions that create a new item. You can use the values fail, replace, or rename. The default for PUT is replace. An item will never be returned with this annotation. Write-only.
In order to have it automatically rename the file, you add #microsoft.graph.conflictBehavior=rename as a query parameter to your URI.
PUT /me/drive/items/{parent-id}:/{filename}:/content?#microsoft.graph.conflictBehavior=rename
I have a Sphinx project with a collection of files that contain external links as references at the bottom of each file like this:
Some text with `my link`_, more text
100 lines of text ...
.. _my link: http://example.com
I'd like to reorganize my files, splitting them, merging them and reusing external links. To make this easier, I'd like to keep my links in a separate file, each one with a unique id that I can reference in the text. Is there a way to do this? The rendered output should still create an external link, not a footnote like it was suggested in How do I collect all external links in Sphinx?
This can be solved with the right settings in conf.py:
# Exclude link file
exclude_patterns = ['_build', 'links.rst']
# make rst_epilog a variable, so you can add other epilog parts to it
rst_epilog =""
# Read link all targets from file
with open('links.rst') as f:
rst_epilog += f.read()
links.rst looks like this:
.. _my link: http://example.com
.. _my other link: http://example2.com
With this setup, I'm flexible to use either the unique ID as the link label or provide a custom link label:
Some text with `my link`_ and a `custom label<my other link>`_
I think (correct me if I am wrong) that it is better to put a / at the end of most of url. Like this: http://www.myweb/file/
And not put / at the end of filenames: http://www.myweb/name.html
I have to correct that in a website with a lot of links. Is there a way I can do that in a fast way. For instance in some programs like Dreamweaver I can use find and replace.
The second case is quite easy with Dreamweaver:
- Find: .html/"
- Replace: .html"
But how can I say something like:
- Find: all the links that end with a directory. Like http://www.myweb/file
- Replace: the same link but with a / at the end. Like http://www.myweb/file/
Your approach may work but it is based on the assumption that all files have a file extension.
There is a distinct difference between the urls http://www.myweb/file and http://www.myweb/file/ because the latter could resolve to http://www.myweb/file/index.php, or any other in the default set configured in your web server. That URL could also reference a perfectly valid file which doesn't contain a file extension, such as if it were a REST endpoint.
So you are correct insofar as you should explicitly add a "/" if you are referring to a directory, for example if you are expecting the web server to look up the correct index page to respond, or doing a directory listing.
To replace the incorrect URLS, regular expressions are your friend.
To find all files which have an erroneous "/" you could use /\.(html|php|jpg|png)\//, adding as many different file extensions into that pipe-separated list as you like. You can then replace that with .$1 or .\1 depending on your tool.
An example of doing this with Perl would be:
perl -pi -e 's/\.(html|php|jpg|png)\//.\1/g' theFileYouWantToCheck.html
Of (if you're using a Linux-based system) you can automate that nicely with find:
find path/to/html/root -type f -name "*.html* | xargs perl -pi -e 's/\.(html|php|jpg|png)\//.\1/g'
which will find all html files in the directory and do an inline find and replace. Assuming you're using version control, it's then easy to see the changes it's applied :)
Update
Solving the problem for adding a slash to directories isn't trivial. The approach I'd take:
Write a script to recurse through your website structure locally, making a list of all files
Parse the HTML files to extract all href=".*" and replace them with href=".*/" only if the end of the URL isn't present in the list extracted by the first script.
Any text-based find and replace is not going to be aware of whether the link is actually to a file or not.
I am trying out TYPO3's introduction package. For that I am using Xampp on my computer.
I have installed it in a subdirectory, but since it uses "real-url", I need to modify the generated links, so that instead of http://localhost/about-typo3/ I get http://localhost/subfolder/about-typo3/
I believe it must be done via "typo-script", and from what I have read on the Internet, this line should do the job :
config.baseURL = http://localhost/subfolder/
But I don't know where I should put it. I have tried different locations, but with no apparent effect.
So what I would like to know is : am I on the good path for what I need to do, and if yes, what should I try now ?
This is a bug in the 4.6 Introduction Package. 4.7 will ship with a correct version, so you might just want to go ahead and try the Introduction Package from 4.7RC2 (Preview Releases).
For now, just choose Template in the module menu on the left. Then use the dropdown to select Constant Editor. Now choose the page HOME in the pagetree on the middle.
Now use the second dropdown to select CONFIG. There modify the topmost setting Absolute URI prefix. Input your full domain without the last slash (/). That means copy your current URL from the browser and strip /typo3/backend.php. Now save with the little save icon in the top toolbar.
This will also invalidate all caches for you (because you changed the topmost template). No need to install extra extensions or to do this manually.
Alternative you can fix the actual bug. Go to template module and select the folder TypoScript Templates / page_configuration. Now select Info/Modify instead of Constant Editor and directly above the table page.config. The click the pencil left of Setup. Find the line absRefPrefix = {$config.absRefPrefix}/. This should be around line 62 (4.7RC2). Remove the last slash (/) from that line and save. Because you are not on the topmost template, you need to clear the cache. On the topright of your screen, you can find the yellow flash icon. Click it and select Clear all caches (red flash). Now go to you website again.
A general note about (config.)baseURL. This is more a hack, because it just tells the browser to behave as if the website would be at another place. The correct way is to create correct links in first place. You should use (config.)absRefPrefix instead. To make this work in auto mode, it must be completely empty (config.absRefPrefix =).
Do not use baseURL any more. The next Introduction Package will not have this setting.
Yet another note: If you use the config.absRefPrefix, you have to include the last slash (/). The only reason why you do not have to do so above (in the constants), is because it is hardcoded in the template and thus also preventing the automatic detection to work.
If you are using different hosts, you can use typoscript conditions in your root template:
# Default:
config.baseURL = http://www.example.com/
[globalString = ENV:HTTP_HOST=sub1.example.com]
config.baseURL = http://sub1.example.com/
[global]
[globalString = ENV:HTTP_HOST=sub2.example.com]
config.baseURL = http://sub2.example.com/
[global]
if you are using introduction package. there is Constant for set the base url
Go to 'Template' and 'Constant Editor.. you can find 'Domain name for Base URL [config.domain]' .. for setting base url
also you can put the
config.baseURL = http://localhost/subfolder/
on 'Info Modify' Setup field
hope will help you .. sorry for my bad english
Vim noob here. I have code folding working in most places, via indent mode, but for some reason I cannot get Vim to fold .html.erb files in ruby... even with indents.
Here's the relevant region of my vimrc. Is there something else I need to do to make Vim aware of the erb files? Is it possible to customize my folding per file type?
I'm running all the Janus plugins, so have rails.vim, etc. all installed.
let ruby_fold=1
set foldmethod=indent
set foldcolumn=0
set foldlevel=99
nnoremap <space> za<cr>
It's a difficult question, because there's probably something in your vim configuration that inhibits folding and I, for example, can't reproduce it. But I can suggest a few things you could try.
First of all, check what the values of those settings are in the actual buffer. Meaning, open up an erb file and check if the settings are correct. In order to do that, you can type, for example, set foldmethod, which will echo the current value of foldmethod to the screen. If one of the settings doesn't match the ones in your .vimrc, then that might be the problem.
Also, see if the file really does have the "eruby" filetype. If it's not displayed in your statusline, you could check that with set filetype.
Most importantly, one way of customizing settings per filetype is by creating a file with the filetype's name inside the ~/.vim/ftplugin directory. In your case, you can create the file ~/.vim/ftplugin/eruby.vim and put any filetype-specific settings in it. Setting them with setlocal instead of set will keep them local to the file. If it turns out the settings for erb are off, you can "fix" them by putting the values you want there.