Google Custom Search is returning this 403 error from my iPhone 7.1 app. This is the response when run in the simulator:
{
"error": {
"errors": [
{
"domain": "usageLimits",
"reason": "accessNotConfigured",
"message": "Access Not Configured. Please use Google Developers Console to activate the API for your project."
}
],
"code": 403,
"message": "Access Not Configured. Please use Google Developers Console to activate the API for your project."
}
}
Is there a flaw in the steps below? I’d like to establish a working CSE setup process specific to iOS apps. The screenshots at each step will hopefully help and not confuse!
Create a Custom Search Engine (CSE) at https://www.google.com/cse/
From Setup -> Basics, get the Search engine ID.
Test the CSE at https://developers.google.com/apis-explorer/#p/customsearch/v1/search.cse.list
Set "q" to any test query terms ("foo bar") and "cx" to the Search engine ID in step 2.
Press "Execute" and receive your search results. They work. Google also provides this URL which we'll re-use in Xcode in step 8.
To get ourselves a key for ID and billing purposes, create a new project at https://console.developers.google.com/
Under APIs & auth -> APIs -> Enable "Custom Search API." No other APIs are enabled.
Under APIs & auth -> Credentials -> Create a new iOS key.
Note: I also tried a browser key and the search result returned "Error 400: Invalid Value." I returned to the iOS key since I'm on iOS and the error seemed less severe.
Add to this key your bundle identifier from Xcode.
In Xcode make your GET request to the URL in step 3. Replace {YOUR_API_KEY} with the key from your credentials in steps 6-7.
NSData *response contains the error 403 shown above. Thanks for any thoughts on what's wrong!
It was missing the header field X-Ios-Bundle-Identifier.
NSString *bundleID = #"com.yourCompany.yourApp";
//...define request as above
[request setHTTPMethod:#"GET"];
[request setValue:bundleID forHTTPHeaderField:#"X-Ios-Bundle-Identifier"];
Related
In my code, I have been pulling the list of media in Instagram using the following URL:
https://graph.facebook.com/{app_id}/media?fields=media_url,{..some fields here...}&limit=10000&access_token={my_access_token}
This was working fine and I didn't touch the code for a month. Now suddenly it gives the error:
{
"error": {
"message": "(#100) Tried accessing nonexisting field (media) on node type (Application)",
"type": "OAuthException",
"code": 100,
"fbtrace_id": "Aty4vnPpLWfGq9Hj6hQFtZR"
}
}
Nothing in the documentation says that media is no longer available. Graph API version has updated from v14 to v15 since I used it, but the request isn't working on either version.
Access token is fine because other requests are working correctly.
Does anyone have any insights? What alternatives do I have?
I think you are defining an invalid field. Below is a list of fields you can use. Also i suggest you also try instagram account id instead of app_id.
fields=[id,ig_id,media_product_type,media_type,media_url,thumbnail_url,timestamp,
username,like_count,comments_count]
final url:
https://graph.facebook.com/v14.0/{instagram_account_id}/media?fields=id,ig_id,media_product_type,media_type,media_url,thumbnail_url,timestamp,
username,like_count,comments_count&access_token={my_access_token}
I have been trying to fetch all videos from a playlist using YouTube Data API, which worked like a char; next, I wanted to try and filter videos based on languages, so I wanted to try to include the "localizations" part. However, whenever I do, I get a 400 response stating that "localizations" is "unkownPart". From what I could see in the documentation, I should have my GET request structured properly:
`https://youtube.googleapis.com/youtube/v3/playlistItems?part=localizations&part=snippet&maxResults=${limit}&playlistId=${playlistId}&key=${apiKey}`
Error message in postman:
{
"error": {
"code": 400,
"message": "'localizations'",
"errors": [
{
"message": "'localizations'",
"domain": "youtube.part",
"reason": "unknownPart",
"location": "part",
"locationType": "parameter"
}
]
}
}
"localizations" is a direct copy from the documentation. The GET request works fine if I remove it so I'm confident that the problem is either the order or my parameters, or the combinations of parameters in use (though I couldn't find anything about incompatible parameters in the documentation).
Parameters order goes as follows:
localizations
snippet
playlistId
key
EDIT: link to the documentation: https://developers.google.com/youtube/v3/docs/playlists/list
After sending the Issue Report it was discovered that I had been using the wrong API endpoint. Somehow (I can't remember why) I was using the "playlistItem" endpoint which doesn't support "localizations", and needed to shift to using the "playlists" endpoint instead.
Furthermore when using a combination of both "snippet" and "localization", they should be within the same parameter but comma-separated, however, Postman doesn't auto-convert the commas in the parameters to "%2C" and therefore would cause further trouble understanding the requests. Fixing these 2 steps, it now works as intended.
I'm planning to integrate a website with eBay using PHP, but first I'm using Postman to test everything.
Authorization took me an entire day, but I think I've got it working now. (I had to update to the latest version of Postman, then I got it to create a token for me.)
I say I think because I haven't managed to get a single request to work. I deliberately chose bulkGetInventoryItem (documentation) as it seemed like one of the easier authorized requests to get working. I just know that when the authentication settings are wrong, I get a different error message to when they are right.
For troubleshooting reasons, I made a token with all the scopes:
https://api.ebay.com/oauth/api_scope
https://api.ebay.com/oauth/api_scope/sell.marketing
https://api.ebay.com/oauth/api_scope/sell.inventory
https://api.ebay.com/oauth/api_scope/sell.account
https://api.ebay.com/oauth/api_scope/sell.fulfillment
https://api.ebay.com/oauth/api_scope/sell.finances
https://api.ebay.com/oauth/api_scope/sell.payment.dispute
https://api.ebay.com/oauth/api_scope/commerce.identity.readonly
(added as space-separated list of links)
I have changed one of the eBay listings to have an SKU of "123456" just for this test, however the error I get is exactly the same as if I change "sku": "123456" to "sku": "anObviouslyFakeSKU", but anything else I change creates a new error, so I'm suspecting the issue to be SKU related, but maybe it isn't. (I've found the eBay API to be very poor at sending relevant error messages.)
I'm quite new to Postman, so it's likely a rookie mistake.
Earlier errors have shown to be minor punctuation issues or wrong radio buttons ticked, so hopefully whatever the error is this time, it should appear in this screenshot.
What did I do wrong this time? (Let me know if there are any other screenshots I can send that might help.)
To help, both with the post's SEO, and ease of copy/pasting, I am transcribing the important text in the screenshot above:
url
POST https://api.ebay.com/sell/inventory/v1/bulk_get_inventory_item
body, raw
{
"requests": [
{
"sku": "123456"
}
]
}
output
{
"errors": [
{
"errorId": 2003,
"domain": "ACCESS",
"category": "APPLICATION",
"message": "Internal error",
"longMessage": "There was a problem with an eBay internal system or process. Contact eBay developer support for assistance",
"parameters": [
{
"name": "reason",
"value": "Failed to transform underlying error response, see logs."
}
]
}
]
}
Update:
One more screenshot
Update 2:
Another screenshot
A few things you need to check for in Postman.
When you authenticate and receive a token are you posting that token with your api calls like this one POST https://api.ebay.com/sell/inventory/v1/bulk_get_inventory_item?
Have you set the Authorization HTTP header for authentication authorization?
Have you set the Content-Type header for the call to application/json?
More info here: https://developer.ebay.com/api-docs/sell/inventory/resources/inventory_item/methods/bulkGetInventoryItem
Update
Authorization with environment variable in Postman:
Postman environment variables documentation:
https://learning.postman.com/docs/postman/variables-and-environments/variables/
I figured out the issue. My biggest mistake was choosing bulkGetInventoryItem as the "simplest" call. I should have chosen getInventoryItem, as the error reporting on that function is far more user friendly.
So the error I got, for exactly the same request was "We didn't find the entity you are requesting. Please verify the request"
A quick google of the error found me this page https://forums.developer.ebay.com/questions/17883/cannot-get-my-listed-product-by-get-inventory-api.html which led me to the correct answer!
The inventory item I was trying to access was unreachable because it was not created through the developer API.
I hope this answer helps others, as it wasted a full day of my life trying getInventoryItem before tackling bulkGetInventoryItem.
https://maps.googleapis.com/maps/api/place/textsearch/json?location=-33.8670522,151.1957362&radius=500&types=food&name=cruise&key=api_key
but unfortunately i m inable to get the result and it displays an error message:
{
"error_message": "This IP, site or mobile application is not authorized to use this API key. Request received from IP address 106.67.62.253, with empty referer",
"html_attributions": [],
"results": [],
"status": "REQUEST_DENIED"
}
You need create a project from google developer console. link OR link 2 add create a new Project, add credential, get API and Enable
location service. This may help for you.
I have a public calendar on the site. I need to display upcoming events on the front page.
After spending the whole day on this I am about to give up. Google is disabling older API there is no documentation or anything. I am parsing the RSS feed:
http://www.google.com/calendar/feeds/.../public/basic?futureevents=true
And grabbing feed/entry/update and feed/entry/title from XML. I read somewhere that futureevents will display upcoming events. However I get the list of older events.
Okay, then I tried to use API V3 https://developers.google.com/google-apps/calendar/v3/reference/events/list
Here is the responce I get:
{
"error": {
"errors": [
{
"domain": "usageLimits",
"reason": "dailyLimitExceededUnreg",
"message": "Daily Limit for Unauthenticated Use Exceeded. Continued use requires signup.",
"extendedHelp": "https://code.google.com/apis/console"
}
],
"code": 403,
"message": "Daily Limit for Unauthenticated Use Exceeded. Continued use requires signup."
}
}
I jumped through more hoops and installed their ruby code sample as I need this for Rails site.
It sort of worked but it requires user to confirm access to their own calendar. I don't need that. Plus it seems that authentication only valid for a day.
The said calendar is public. It is being displayed in iframe on the site with xml and ical feed. All I need is to parse upcoming events to show them on front page.
What is the way to do it without authorization and other ridiculous stuff?
//This works for me! js:
var request = gapi.client.calendar.events.list({
'calendarId': 'xxx',
'timeMin': (new Date()).toISOString(),
'showDeleted': false,
'singleEvents': true,
'maxResults': 1,
'orderBy': 'startTime'
});
request.execute(function(resp) {}
Use this wizard to create a new API project: https://console.developers.google.com/start/api?id=calendar Then click on "create new key" (choose server key). Then do a request to https://www.googleapis.com/calendar/v3/calendars//events?key={YOUR_API_KEY} replacing the email and api key with your values.