Working on an appliance and would like to support zero configuration feature. That way users can look for the device on the network and simply double click an icon to access the web interface without having to configure it or know its ip address.
Tried to use UPNPLib_TLB but functions seem to be read-only; am I right? I can create a device using CoUPnPDevice.Create but can't set a FriendlyName or a URL.
Tried to use Deltics Bonjour service but it crashes on create (ACCESS_VIOLATION). The demo code uses a custom test unit which complicates experimentation.
After much research it does not look like there is a component available for this and would appreciate some pointers. Has anyone successfully created a zeroconf broadcast either via UPnP or Bonjour with Delphi XE2/5.. I can go back to Delphi 7 if required. Target = Windows 7.
NOTE: To be clear, I can find existing devices on the network and don't want to enumerate existing devices but what I want is to broadcast my service so that my box behaves like a network printer for example. The only service I need to expose is the URL so that users can access an embedded web server.
Appreciate the help!
EDIT
With the tips provided I did some research and getting this done the RAD way is not possible.
Using MS APIs directly is time consuming and requires a level of understanding of C that I don't have. Porting the Delphi 5/Indy 7 component to XE2/5 will require a good amount of work and debugging.
I discovered UPnP developer tools from Intel now open source here: Developer Tools for UPnP. This tools makes it really simply to create a server in 10-15 lines of code. Intel provides a DLL that I can call from VS Express as follows and it works great:
device = UPnPDevice.CreateRootDevice();
device.FriendlyName = 'My name';
device.PresentationURL = 'URLToEmbeddedServer";
..
I tried to use headconv7 tool to convert the .h file Intel's UPNP.DLL to a pascal file and call the external functions within the DLL directly from Delphi but there were too many problems with the conversion.
It's too bad because the Intel library makes it really simple to create UPnP stacks and the approach would apply itself very well to a component but for now its quicker to use .NET and VS Express to get the job done.
When using UPNPLib_TLB, you are not supposed to create a UPnPDevice object directly. UPnpDevice describes a known device on the network, which is why its properties are read-only.
Read the documentation:
Control Point API
Finding Devices
You are supposed to create an instance of the UPnPDeviceFinder class instead. Its search methods will give you a UPnDevice object for each device that is found.
Related
I am working on a Delphi FMX application that uses Bonjour for broadcasting and discovering devices on the local network. On the Mac side, there is an interface named NSNetServiceDelegate, but it is not implemented in the interface of Delphi's Macapi.Foundation unit. This delegate will discover and resolve services on the local network. Since it is not implemented, I get Access Violations.
I know it is possible to use Bonjour on the Apple side, but I don't know how to set it up.
I found this: Using OS X APIs directly from Delphi, but it is working with an interface that was implemented on the Delphi side.
How can I structure my code to gain access to something not yet implemented in Delphi?
I was looking for some Windows API that will give me notification for any change in the Local Area Connection Properties.I tried Searching for the Entry in the Registry which it modifies after we check or uncheck the driver name but could find it.
I have also attached an image if any one has any confusion in understanding my question.
Any guidance would be appreciated.
What you need is the Windows API for Network Awareness. It would be great if Delphi example implementations were readily available but they are not. The API's are all COM interfaces and you will have to find out how to use these within Delphi yourself. That is another question. However, for the INetworkConnection, this may get you started.
I'm new to iOS, have been developing in Delphi for many years.
I don't know FPC well and i find it very hard to figure out which classes are available on iOS.
is there any FireMonkey classes for calling web services and parsing xml?
Yes you can call a webservice :)
No it is not simple :(
You need to access the iOS framework directly...
The following code fragments will help...
First a pascal example of how to send/receive data via TCP
https://forums.embarcadero.com/thread.jspa?messageID=397346
Secondly, you will need to wrap the call using the relevant headers. See...
http://books.google.com.au/books?id=0nTYIL3-0yoC&pg=PT518&lpg=PT518&dq=beginning+ipad+development+webservices&source=bl&ots=cYniLvL8z2&sig=Ci6HskHgMvUeIrjyUbDecd7fBCQ&hl=en&ei=0_KdTpzBB4nOrQfwzM29CQ&sa=X&oi=book_result&ct=result&resnum=6&ved=0CEAQ6AEwBQ#v=onepage&q&f=true
It is a fair bit of work, but it can be done. Good luck!
You can also try to use RealThinClient (RTC) SDK to allow your Delphi XE2 FireMonkey iOS client to connect to a RTC SDK server. Not SOAP, but I've managed to send data back and forth between the two layers (just in case you do not have to use SOAP, but are merely looking for some way to connect an iOS client to a server)...
Does anyone have experience integrating SmartCard authentication in their Win32 apps? If so, are there any preferred libraries?
Try SecureBlackbox, A component that works fine for me, a second choice can be
Delphi PC/SC SmartCard Component 0.91.
try
Well I guess that you have an SmartCard reader ... if so (and if you don't have one I don't know how you are going to manage this) then it must have some interface, RS232, USB, TCP/IP ... any one will do.
Communication protocol usually is available at SmartCard reader manufacturer. Few lines, and you will have it working in Delphi.
You need to read the developer manual that comes with reader you're going to use. It might only use PC-SC (by MS) to communicate, if so you can use the component specified by RRUZ, however it doesn't work with D2009. Otherwise you'll need to use API provided by SDK.
We have a range of PC demonstration programs for our microcontroller products. The programs typically connect to a USB HID chip on the microcontroller board. The USB chip acts as a communications bridge, allowing the programs to communicate with the micros over SPI/I2C/UART. The programs can configure the micros, and get back status information to display to the user.
We are now looking to build some standalone demonstrations using single board PCs. We would like to reuse as much as possible of our existing demo app source code. Ideally, we could just run them as-is.
Does anybody have any advice on the best way forward? The basic options seem to be WinCE or XP Embedded boards. WinCE boards seem to pull less power, which would be an advantage from a battery life point of view.
Our existing demos are built either in C++ under Borland Builder, or in Delphi.
Thanks in advance.
EDIT: see my answer below with info from a board vendor.
Free Pascal/Lazarus can compile some forms of Delphi apps to WiNCE/arm. Even visual ones.
There isn't a Delphi version for WinCE, so you would need to rewrite the applications. The same applies for the Borland Builder's control libraries. Only if you have used plain Win32 API, you would be able to port your application to WinCE easily. You may also encounter problems with the hardware access part. The Serial Port driver may not work as is. Also, you need to find a WinCE board that can act as USB host and provides HID drivers (this isn't very common).
In conclusion, I believe that you would be better of with Windows XP Embedded boards. These should run your applications as they are.
As an update, and for future reference, I thought I'd post the results of our discussions with a WinCE board vendor here. Caveat: I haven't actually tried any of this.
The bottom line is that there isn't a straightforward way to do what we were hoping for (i.e., re-compile our existing demo applications to run under WinCE). The reason is that the generic HID drivers and standard APIs that exist in desktop flavours of Windows just aren't there in WinCE.
To talk to HID devices in WinCE you need to implement a custom HID driver. This needs to support an interface allowing user mode applications to communicate with the driver, and to construct HID reports to be sent to the physical device. As this interface would itself be custom, application code needs to be updated accordingly.
WinCE application development is generally done using Visual Studio and the Microsoft compilers. The approach recommended to us was:
Create a custom HID class driver. This could be based on, for instance, the Microsoft keyboard HID driver.
Create an API for talking to the driver.
Use .net to create our GUI applications, and use PInvoke to actually talk to the API.
The end result of all this head-scratching is that to avoid the time and learning curve associated with this approach, we're going to go for a board running XP. We can then use our existing demo applications straight out of box. The trade-off is that we'll have to live with substantially reduced battery life.