I am adding a custom view programmatically to another view defined in the Storyboard, but when I go back to this view, the custom one disappears.
This is happening only when coming back from Storyboard segues, when I push a View programmatically and go back, it doesn't disappear.
Also, it's happening only on iOS 7. iOS 6 is fine.
Thanks in advance to everyone.
collectionView.frame = CGRectMake(collectionView.frame.origin.x, collectionView.frame.origin.y, collectionView.frame.size.width, collectionView.frame.size.height - ADROTATORHEIGHT);
CGFloat width = self.view.frame.size.width;
CGFloat x = self.view.frame.origin.x;
CGFloat y = self.view.frame.size.height - ADROTATORHEIGHT;
adHolder.frame = CGRectMake(x, y, width, ADROTATORHEIGHT);
adHolder.backgroundColor = [UIColor whiteColor];
[adHolder addSubview:adViewController.view];
[self.view addSubview:adHolder];
[collectionView reloadData];
If anyone has this problem, I solved it by repositioning the frame every time the view will appear (in viewWillApear with the view.frame = CGRectMake(x, y, width, height)).
Related
https://github.com/EuanChan/XSlidableTabController
From there i download one demo sliding Tabbar but in this demo i want tabbar position little bit down because i want set one image, label and back button top of page but i can't able to find to set tabbar position ,
and i hide navigation bar its automatically on set top i want to little bit down
-(void)viewWillAppear:(BOOL)animated {
self.navigationController.navigationBarHidden = YES;
}
BUT i want to set image top of tabbar
please Help me , please share your valuable knowledge
Just change the baseY value in viewWillLayoutSubviews method in XSlidableTabController.m.
- (void)viewWillLayoutSubviews
{
[super viewWillLayoutSubviews];
CGFloat baseY = 60.0f, width = self.view.frame.size.width;
CGRect rtTabMenu = CGRectMake(0, baseY, width, _tabHeight);
[_tabView setFrame:rtTabMenu];
baseY += rtTabMenu.size.height;
CGRect rtContent = CGRectMake(0, baseY, width, self.view.frame.size.height - baseY);
[_scrollView setFrame:rtContent];
CGSize szScrollContent = _scrollView.contentSize;
szScrollContent.height = rtContent.size.height;
[_scrollView setContentSize:szScrollContent];
}
Follow below steps.
open XSlidableTabController.m
go to - (void)viewWillLayoutSubviews method
add below code at last
// change 20 to any other what ever you want.
[_tabView setFrame:CGRectMake(0, 20, self.view.frame.size.width, _tabHeight)];
[self.view bringSubviewToFront:_tabView];
Maybe this will help you.
I have a view containing a UITableView. On view did load, I set the table's tableFooterView to be a view I create by hand (a UIView containing a button). When the view appears, I adjust the frame of the tableFooterView:
CGRect tableFrame = self.myTableView.frame;
CGRect originalFrame = self.tableFooter.frame;
CGSize imageSize = CGSizeMake(40.0f, 40.0f);
CGRect footerFrame = CGRectMake(originalFrame.origin.x, originalFrame.origin.y, tableFrame.size.width, imageSize.height);
self.tableFooter.frame = footerFrame;
CGRect nextFrame = CGRectMake((footerFrame.size.width - imageSize.width) / 2.0f, 0.0f, imageSize.width, imageSize.height);
self.tableFooterButton.frame = nextFrame;
On iOS7, this works the way I want -- when I scroll to the bottom of the table, I see my footer view. On iOS6, when I scroll to the bottom of the table, the footer view is still offscreen (I can pull the scroll view and see it, but it resets offscreen when I release).
What should I do differently?
After change the frame of table footer, try this:
self.myTableView.tableFooterView = nil ;
self.myTableView.tableFooterView = self.tableFooter ;
My universal app uses NIBs for its settings screens. I'd like to use the same NIBs for both iPhone and iPad.
Thus on iPad, I use a UIPopoverController in the MainViewController and for settings, simply display the iPhone-sized NIBs, to show what is called the SettingsViewController. The popover is sized 320x460 points.
This causes a problem, because the iPhone version draws a number of things above the status bar programmatically, and for the iPad version this is not necessary. Current situation on iPad:
As you can see, there's a big empty space above the "Settings" title. Thus what I want, is to shift the view controller up about 20 points, inside the popover:
The popover is instantiated as follows in the MainViewController:
settingsPopoverController = [[UIPopoverController alloc] initWithContentViewController:popoverNavigationController];
settingsPopoverController.popoverContentSize = CGSizeMake(320, 460);
settingsPopoverController.delegate = self;
popoverNavigationController.navigationBarHidden = YES;
In the SettingsViewController, I set the frame as follows:
- (void)viewDidLoad
{
self.contentSizeForViewInPopover = CGSizeMake(320, 460);
}
And later in the SettingsViewController, I try to create an offset as follows:
- (void)viewWillLayoutSubviews
{
// shift it up
CGRect frame = self.view.frame;
frame.origin.y = -20;
[self.view setFrame:frame];
}
This does not shift the content up a bit. How to go about?
To clarify: I want to move down the "viewport" that the popover shows.
Try to:
myPopover.autoresizingMask=UIViewAutoresizingNone;
Or:
myPopover.autoresizingMask=UIViewAutoresizingFlexibleHeight || UIViewAutoresizingFlexibleWidth;
You can also try to put your code in -(void)viewDidLayoutSubviews method.
If this answers did not help, try set popoverLayoutMargins (property) instead of setFrame: for example:
popover.popoverLayoutMargins=UIEdgeInsetsMake (
CGFloat 50, //top
CGFloat 50,//left
CGFloat 50,//bottom
CGFloat 50//right
);
I design the scrollview in interface builder like this
It looks good here. But unfortunately when I run it on emulator or device
it becomes
The content in scrollview is expand outside scrollview itself and even though outside UIView that contains this scrollView.
In my viewDidLoad (panel is the container of scrollView )
- (void)viewDidLoad
{
[super viewDidLoad];
// Do any additional setup after loading the view.
CGFloat adjustPanelHeight = [PTTScreenScaleUtil getAdjustHeight:self.panel.frame.size.height];
CGRect panelRect = self.panel.frame;
panelRect.size.height = adjustPanelHeight;
self.panel.frame = panelRect;
UIImage *image = [UIImage imageNamed:#"panel-background"];
UIGraphicsBeginImageContext(self.panel.frame.size);
[image drawInRect:CGRectMake(0, 0, self.panel.frame.size.width, adjustPanelHeight)];
UIImage* newImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
[self.panel setBackgroundColor:[UIColor colorWithPatternImage:newImage]];
NSLog(#"scrollView Height : %f", self.scrollView.frame.size.height);
NSLog(#"scrollView contentSize Height : %f", self.scrollView.contentSize.height);
// CGRect scrollViewRect = self.scrollView.frame;
// CGRect scrollViewContentRect = self.scrollView.frame;
// NSLog(#"ScrollView Height Before : %f , After : %f", self.scrollView.frame.size.height, [PTTScreenScaleUtil getAdjustHeight:self.scrollView.frame.size.height]);
// scrollViewRect.size.width = 280;
// scrollViewRect.size.height = [PTTScreenScaleUtil getAdjustHeight:270];
// self.scrollView.frame = scrollViewRect;
// [self.detailsLabel sizeToFit];
UIView *view = [[self.scrollView subviews] objectAtIndex:0];
// [view sizeToFit];
// [self.scrollView setContentMode:UIViewContentModeScaleAspectFit];
// NSLog(#"ContentSize Height : %f", view.frame.size.height);
// scrollViewContentRect.size.height = view.frame.size.height;
NSLog(#"Bounds : %f", view.bounds.size.height);
self.scrollView.frame = CGRectMake(10, 10, 280, 270);
self.scrollView.contentSize = CGSizeMake(280, 500);
NSLog(#"Frame Height %f", self.scrollView.frame.size.height);
//[self.scrollView setContentSize: CGSizeMake(280, 1000)];
CGRect termBtnRect = self.termBtn.frame;
CGRect mailBtnRect = self.mailBtn.frame;
CGRect twitterBtnRect = self.twitterBtn.frame;
CGRect fbBtnRect = self.fbBtn.frame;
termBtnRect.origin.y = adjustPanelHeight - 10 - termBtnRect.size.height;
mailBtnRect.origin.y = adjustPanelHeight - 10 - termBtnRect.size.height;
twitterBtnRect.origin.y = adjustPanelHeight - 10 - termBtnRect.size.height;
fbBtnRect.origin.y = adjustPanelHeight - 10 - termBtnRect.size.height;
self.termBtn.frame = termBtnRect;
self.mailBtn.frame = mailBtnRect;
self.twitterBtn.frame = twitterBtnRect;
self.fbBtn.frame = fbBtnRect;
}
All the log return 270.0
PS. the scroll bar is correct even though the content goes outside but the scroll bar is working correctly (stay in the scrollview's frame as arrange in interface builder)
I have no idea how can I solve this.
Anyone help me please.
Thanks you.
Solve it by creating new view controller in interface builder and redo the same process with careful and bingo. It works.
When I compare both two view controller I realise that the wrong one UIScrollView Clip Subviews is unchecked. When check it the problem solve.
I just struggled with this for an hour and had a head smack moment.
In my case, I had a UIView on the scene in the Storyboard. At some point I decided I needed it to be a UIScrollView instead (as opposed to the original plan which was to embed the UIScrollView in a UIView)
I went ahead and changed the class on the UIView to UIScrollView. IB changed it to Scroll View in the Document Outline, I figure I'm good, right?
And then I see the behavior you describe.
At some point it hits me that this isn't sufficient. Apparently adding a UIScrollView via IB does some things differently than adding a UIView and just changing class isn't enough. And this is probably the reason re-doing it from scratch fixed it for you.
So for anyone who runs into this in the future, make sure you added the UIScrollView via IB instead of a UIView
I was having the same problem as described in this post. I tried multiple combinations of solutions that did not work, including:
putting the scroll view inside a view with Clip To Bounds = YES
putting a view inside the scroll view with Clip To Bounds = YES, that then contained my child view
putting a Container View inside the scroll view, and then embedding my subview
rebuilding the Interface Builder files completely
every combination of autosizing mask options systematcially for both the scroll view and container view
clip to bounds enabled or disabled for every single element systematically
The child view in question had previously worked inside a scroll view, but wouldn't in this one case where the content blew outside the bounds of the scroll view.
In the end, I implemented the solution in code as I could find no way to get Interface Builder to co-operate:
// There are two scroll areas on the screen, the left view and the right view.
// We want the right view to contain a scrollable area with another child view controller
// we designed in Interface Builder.
// create a scroll view to fill the right view with a scrollable area
CGSize rightFrameSize = self.rightView.bounds.size;
scrollView = [[UIScrollView alloc] initWithFrame:CGRectMake (0, 0, rightFrameSize.width, rightFrameSize.height)];
scrollView.contentSize = CGSizeMake(640, 1352);
[self.rightView addSubview:scrollView];
// now create our child view controller from Interface Builder and add it to the scroll view
UIStoryboard *sb = [UIStoryboard storyboardWithName:#"CustomerAddress" bundle:[NSBundle mainBundle]];
detailsView = [sb instantiateViewControllerWithIdentifier:#"CustomerDetailsView"];
detailsView.delegate = self;
detailsView.customer = _customer;
[scrollView addSubview:detailsView.view];
You could of course get the scrollView.contentSize from the child view controller you constructed in Interface Builder using scrollView.contentSize = detailsView.view.frame.size.
I have a love/hate relationship with Interface Builder... most days I love it, but some days we argue and I wish we'd never met... :)
only make cliptobound=YES in storyboard if you changed UIView to UIScrollView
I want to use a UIScrollView as my main container in the app, enabling me to swipe back and forth between subviews. To achieve this, I created a UIViewController subclass with a UIScrollView IBOutlet:
In the viewDidLoad method I construct the sub-pages:
for (int i= 0; i< pageCount; i++)
{
CGRect frame = self.scrollView.frame;
frame.origin.x = frame.size.width * i;
frame.origin.y = 0;
UIWebView* aWebView= [[UIWebView alloc] initWithFrame:frame];
[self.scrollView addSubview:aWebView];
}
When launching the app (portrait mode), everything works. That is, the UIWebViews are layed out side by side with the correct dimensions, and I can swipe back and forth between them.
When I rotate to landscape, it seems that neither the scrollview size nor the subviews are resized.
I don't know what I should do in order to resize the subviews and the scrollview itself, or at what point in code I should do anything, and I cant seem to find any examples for this.
Anyone know what to do?
[edit] Attempt to adjust sizes as suggested by mahboudz:
- (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientation
{
self.scrollView.contentSize = CGSizeMake(self.scrollView.frame.size.width * pageCount, self.scrollView.frame.size.height);
for (int i= 0; i< pageCount; i++)
{
CGRect frame = self.scrollView.frame;
frame.origin.x = frame.size.width * i;
frame.origin.y = 0;
UIWebView* view= [[self.scrollView subviews] objectAtIndex:i];
view.frame= frame;
}
}
This kind of does what I want, but has the following issues:
1) one can see the subviews grow to correct screen size upon changing orientation
2) when the current page is, for example, page 2 of 5 pages, the page is not fully visible after orientation was changed, but is off-screen by like 40 pixels
3) I get strange effects depending on whether the app is launched in portrait or landscape mode (simulator), ill try to explain:
When the app is launched in portrait mode:
The shape/border of the subviews looks messed up/offscreen, see screenshots:
http://i53.tinypic.com/21jr76x.png
when I rotate to landscape, everything looks okay, scrolling works superb. even when I rotate back to portrait, everything is great now:
http://i55.tinypic.com/if3iiw.png
When the app is launchend in landscape mode:
I get the same messed up/offscreen glitches as in portrait mode
Switching back and forth between portrait and landscape fixes this for landscape mode
BUT: Portrait mode will have the subviews with the width of the landscape mode, thus subviews are too wide
I tried to fix 1) doing the code above in willRotateToInterfaceOrientation however it completely messed up the layout.
I fixed 2) by adding the following code to didRotateFromInterfaceOrientation:
// update the scroll view to the appropriate page
CGRect frame = self.scrollView.frame;
frame.origin.x = frame.size.width * self.currentPage;
frame.origin.y = 0;
[self.scrollView scrollRectToVisible:frame animated:NO];
Note: current page is determined in scrollViewDidScroll
I dont have any idea how to fix 3)
You would need to reset the frame size, content size and the content offset in order to get the subviews in a proper position.
CGFloat screenHeight =[UIScreen mainScreen].bounds.size.height;
CGFloat screenWidth =[UIScreen mainScreen].bounds.size.width;
self.scrollView.frame = CGRectMake(0, 0, screenWidth, screenHeight);
self.scrollView.contentSize = CGSizeMake(scrollView.frame.size.width * numberOfPages, self.scrollView.frame.size.height);
self.scrollView.contentOffset = CGPointMake(visiblePageBeforeRotation * self.scrollView.bounds.size.width, 0);
This code should be placed in the method
-(void)willRotateToInterfaceOrientation: (UIInterfaceOrientation)orientation duration:(NSTimeInterval)duration
Check as well the answer on this question:
Clean autorotation transitions in a paging UIScrollView
It has good example named Rotolling for rotating UIScrollView with paging enabled.
Hope this helps.
P.S: I am facing a problem on repositioning the center of the UIWebView on the rotation.
You need to implement viewWillRotate/viewDidRotate and make adjustments to our content size and orientation as needed.