#import "AppDelegate.h"
#implementation AppDelegate
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Override point for customization after application launch.
return YES;
}
- (void)applicationWillResignActive:(UIApplication *)application
{
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}
- (void)applicationDidEnterBackground:(UIApplication *)application
{
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}
- (void)applicationWillEnterForeground:(UIApplication *)application
{
// Called as part of the transition from the background to the active state; here you can undo many of the changes made on entering the background.
}
- (void)applicationDidBecomeActive:(UIApplication *)application
{
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}
- (void)applicationWillTerminate:(UIApplication *)application
{
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}
#end
I want to check when this all method calls.
How can I put NSLog to every method so whenever it gets called I know?
copy & paste ?
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
NSLog(#"didFinishLaunchingWithOptions");
return YES;
}
- (void)applicationWillResignActive:(UIApplication *)application
{
NSLog(#"applicationWillResignActive");
}
- (void)applicationDidEnterBackground:(UIApplication *)application
{
NSLog(#"applicationDidEnterBackground");
}
- (void)applicationWillEnterForeground:(UIApplication *)application
{
NSLog(#"applicationWillEnterForeground");
}
- (void)applicationDidBecomeActive:(UIApplication *)application
{
NSLog(#"applicationDidBecomeActive");
}
- (void)applicationWillTerminate:(UIApplication *)application
{
NSLog(#"applicationWillTerminate");
}
#end
Related
According to the official tutorial, the iOS application has several main states, such as foreground, background, and suspended state. An app in use whose view page is at the top of the screen is the foreground state.Then, when the home button is pressed or other applications are used, the APP is in the background state. After that, depending on the mobile phone system resources, the suspended APP may be killed at any time. This is the information that can be found online.
Next was the problem I encountered. After being in the background for a long time, I entered the app I developed again and found that I went directly to the last used view page(The picture was attached below. When using the app in the foreground, the username of the currently logged in user was displayed under the avatar. When returning from the background to the foreground, the username under the avatar became empty). This means that the APP has not been killed, but the data on the page is lost, and some of the data in the memory is partially lost too. It feels that the memory related to the app is partially recovered by the system.This makes me very confused.
I did't do any work about the state preservation and restoration process. I did't need to remember the status information of the previous use of the app when I relaunch the app. All I need is to ensure that the memory occupied by the app is fully restored when the app returns to the foreground from the background.
tips:The background in the expression of returning from the background to the foreground mentioned above, indicates the background or suspended state
view when app back to the foreground
here is my code in AppDelegate
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
if(launchOptions != nil) {
/*remote message push related code*/
}
self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
[self.window makeKeyAndVisible];
return YES;
}
#pragma mark - APNS
- (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error {
}
- (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)deviceToken
{
/**/
}
- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo fetchCompletionHandler:(void (^)(UIBackgroundFetchResult result))handler {
/*processing code when receiving a message push*/
}
- (void)userNotificationCenter:(UNUserNotificationCenter *)center didReceiveNotificationResponse:(UNNotificationResponse *)response withCompletionHandler:(void (^)())completionHandler{
/*processing code when receiving a message push*/
}
#pragma mark - application state
- (void)applicationWillResignActive:(UIApplication *)application {
self.isRunningForeground = NO;
}
- (void)applicationDidEnterBackground:(UIApplication *)application {
}
- (void)applicationWillEnterForeground:(UIApplication *)application {
}
- (void)applicationDidBecomeActive:(UIApplication *)application {
self.isRunningForeground = YES;
}
- (void)applicationWillTerminate:(UIApplication *)application {
}
My iphone is 6sp running iOS 11. I develop app with ARC.
This is a repeat I believe of unanswered question here:
https://stackoverflow.com/questions/34499353/could-not-build-module-parse-xcode-6-1-1
I have attempted uninstall and reinstall the sdks, remove and reinsert the framework, and reinstalled the framework and sdk into a brand new project, and is giving error message Every time I try to add reference in AppDelegate.m by adding #import it says couldn't build module 'Parse'.Here are the steps I have followed : https://parse.com/apps/quickstart#parse_data/mobile/ios/native/existing.
Please help me to understand where I went wrong, any feedback would be highly appreciated.
AppDelegate.m
#import "AppDelegate.h"
#import <Parse/Parse.h>
#implementation AppDelegate
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Override point for customization after application launch.
// [Optional] Power your app with Local Datastore. For more info, go to
// https://parse.com/docs/ios/guide#local-datastore
[Parse enableLocalDatastore];
// Initialize Parse.
[Parse setApplicationId:#"Removed for security purposes"
clientKey:#"Removed for security purposes"];
// [Optional] Track statistics around application opens.
[PFAnalytics trackAppOpenedWithLaunchOptions:launchOptions];
// Register for Push Notitications
UIUserNotificationType userNotificationTypes = (UIUserNotificationTypeAlert |
UIUserNotificationTypeBadge |
UIUserNotificationTypeSound);
UIUserNotificationSettings *settings = [UIUserNotificationSettings settingsForTypes:userNotificationTypes
categories:nil];
[application registerUserNotificationSettings:settings];
[application registerForRemoteNotifications];
//Starting the ROXIMITY Engine!
[ROXIMITYEngine startWithLaunchOptions:launchOptions engineOptions:nil applicationId:#"Removed for security purposes" andEngineDelegate:self];
return YES;
}
- (void)applicationWillResignActive:(UIApplication *)application
{
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
[ROXIMITYEngine resignActive]; // Place in applicationWillResignActive
}
- (void)applicationDidEnterBackground:(UIApplication *)application
{
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
[ROXIMITYEngine background]; // Place in applicationDidEnterBackground
}
- (void)applicationWillEnterForeground:(UIApplication *)application
{
// Called as part of the transition from the background to the inactive state; here you can undo many of the changes made on entering the background.
[ROXIMITYEngine foreground]; // Place in applicationWillEnterForeground
}
- (void)applicationDidBecomeActive:(UIApplication *)application
{
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
[ROXIMITYEngine active]; // Place in applicationDidBecomeActive
}
- (void)applicationWillTerminate:(UIApplication *)application
{
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
[ROXIMITYEngine terminate]; // Place in applicationWillTerminate
}
//Adding the following methods for remote notification handling
-(void) application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error
{
[ROXIMITYEngine didFailToRegisterForRemoteNotifications:error];
}
-(void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)deviceToken
{
[ROXIMITYEngine didRegisterForRemoteNotifications:deviceToken];
PFInstallation *currentInstallation = [PFInstallation currentInstallation];
[currentInstallation setDeviceTokenFromData:deviceToken];
currentInstallation.channels = #[#"global"];
[currentInstallation saveInBackground];}
-(void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo{
[ROXIMITYEngine didReceiveRemoteNotification:application userInfo:userInfo];
[PFPush handlePush:userInfo];
if (application.applicationState == UIApplicationStateInactive) {
[PFAnalytics trackAppOpenedWithRemoteNotificationPayload:userInfo];
}
}
-(void)application:(UIApplication *)application didReceiveLocalNotification:(UILocalNotification *)notification{
[ROXIMITYEngine didReceiveLocalNotification:application notification:(UILocalNotification *)notification];
}
-(void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo fetchCompletionHandler:(void (^)(UIBackgroundFetchResult))completionHandler{
[ROXIMITYEngine didReceiveRemoteNotification:application userInfo:userInfo fetchCompletionHandler:completionHandler];
if (application.applicationState == UIApplicationStateInactive) {
[PFAnalytics trackAppOpenedWithRemoteNotificationPayload:userInfo];}
}
#end
AppDelegate.h
#import <UIKit/UIKit.h>
#import "ROXIMITYSDK.h"
#interface AppDelegate: UIResponder <UIApplicationDelegate, ROXIMITYEngineDelegate>
#property (strong, nonatomic) UIWindow *window;
#end
I ran into this problem as well when trying to integrate the SDK manually. I solved it by using cocoapods to handle integrating Parse.
I have a problem during I developing application IOS and I used Parse Push Notification Framework for push remote notification. the problem is when the application is running and the same time the notification has been sent, the application is display modal alert box automatically. So, I don't want the modal alert display. I spent much times on it, and I do research on internet, read documents but no result found, I feel nobody knew about this. Please Help me!
AppDelegate.m
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Override point for customization after application launch.
UIImage *navBackgroundImage = [UIImage imageNamed:#"nav_bg_new"];
[[UINavigationBar appearance] setBackgroundImage:navBackgroundImage forBarMetrics:UIBarMetricsDefault];
[[UINavigationBar appearance] setTitleTextAttributes:#{NSForegroundColorAttributeName : [UIColor whiteColor]}];
// ****************************************************************************
// Uncomment and fill in with your Parse credentials:
// [Parse setApplicationId:#"your_application_id" clientKey:#"your_client_key"];
// ****************************************************************************
[Parse setApplicationId:#"my_app_id" clientKey:#"my_client_key"];
// Override point for customization after application launch.
[application registerForRemoteNotificationTypes:UIRemoteNotificationTypeBadge|UIRemoteNotificationTypeSound];
return YES;
}
- (void)applicationWillResignActive:(UIApplication *)application
{
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}
- (void)applicationDidEnterBackground:(UIApplication *)application
{
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}
- (void)applicationWillEnterForeground:(UIApplication *)application
{
// Called as part of the transition from the background to the inactive state; here you can undo many of the changes made on entering the background.
}
- (void)applicationDidBecomeActive:(UIApplication *)application
{
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}
- (void)applicationWillTerminate:(UIApplication *)application
{
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}
- (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)deviceToken {
PFInstallation *currentInstallation = [PFInstallation currentInstallation];
[currentInstallation setDeviceTokenFromData:deviceToken];
currentInstallation.channels = #[#"global"];
[currentInstallation saveInBackground];
}
- (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error {
if (error.code == 3010) {
NSLog(#"Push notifications are not supported in the iOS Simulator.");
} else {
// show some alert or otherwise handle the failure to register. NSLog(#"application:didFailToRegisterForRemoteNotificationsWithError: %#", error);
}
}
- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo {
[PFPush handlePush:userInfo];
}
Thanks so much in advance.
If you only want to make sure you DO NOT see notifications when the app is opening, set a BOOL isOpening to TRUE in your application:willFinishLaunchingWithOptions: and set it to FALSE during application:didFinishingLaunchingWithOptions:, then change the behavior of didReceiveRemoteNotification: and the call to PFPush handlePush: accordingly.
You can try this instead:
#property (nonatomic, assign) BOOL isLaunching;
- (void)applicationWillEnterForeground:(UIApplication *)application
{
isLaunching = TRUE;
}
- (void)applicationDidEnterForeground:(UIApplication *)application
{
isLaunching = FALSE;
}
- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo {
if (!isLaunching) {
//Only fire the push handler if the application isn't active
[PFPush handlePush:userInfo];
}
}
In my application, I need to make a call, So obviously my app go to background while making a call using native call feature.if the call goes long my app is getting killed by IOS itself. Now i need to restore the last view at the time of making a call. I have used Native restoration. What i did is
1. Set the restoration ID for all the views and view controllers.
2. Override the app delegate restoration methods.
My Issue is,
If my app go to background and come back to foreground, Last view is displayed using preservation and suddenly moved to main view(Default launch view). just like last view blinking while coming to fore ground.
Here is my setting:
app Delegate code :
-(BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
return YES;
}
-(BOOL)application:(UIApplication *)application shouldRestoreApplicationState:(NSCoder *)coder
{
return YES;
}
-(BOOL)application:(UIApplication *)application shouldSaveApplicationState:(NSCoder *)coder
{
return YES;
}
-(BOOL)application:(UIApplication *)application willFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
return YES;
}
Main view settings :
Main storyboard contains the login view as a root. Please guide me to fix the restoration issue.
I managed to get rid of the blinking by making the window key and visible in application:willFinishLaunchingWithOptions:.
- (BOOL)application:(UIApplication *)application willFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
[self.window makeKeyAndVisible];
return YES;
}
#import "AppDelegate.h"
#import "Scringo/scringo.h"
#implementation AppDelegate
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
// Override point for customization after application launch.
return YES;
[Scringo initWithAppId:#"" completion:nil];
}
- (void)applicationWillResignActive:(UIApplication *)application
{
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}
--
Is this the correct spot? the sidebar doesn't slide out in the emulator and I'm not getting any errors?… help
Use before return statement,
-(BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
{
[Scringo initWithAppId:#"YOUR_SCRINGO_APP_ID" completion:nil];
// Override point for customization after application launch.
return YES;
}