I'm working with ASP.NET MVC and I use DevExpress.
I created a menu with MvcSiteMapProvider. It works just as I want while debugging. But when I deploy it to the server it just prints the Strings from the Xml-File.
I checked the File-System of the server and it says that everything needed is deployed. (The Package & the xml-File).
Does somebody know what I forgot?
Or what I do wrong?
Thanks a lot :)
I suspect that you haven't deployed your HTML helper templates. Be sure you copy over the contents of the /Views/Shared/DisplayTemplates/ directory to your server.
Related
I am new to Umbraco, so I started creating a site to play a bit with it. While I had my site running on IIS express (either from VS or WebMatrix) everything worked fine. After deploying the site to IIS 7, the razor views of the front end are display in plain text, meaning that I actually see Razor syntax in the browser. Umbraco back office is working perfect though, except when I hit preview, in that case I get the plain Razor syntax again. I then try to deploy a simple new MVC project to IIS and the Razor engine worked just fine, so I guess is not a problem in IIS but in Umbraco configuration. Is there any configuration tweak I need to take care in Umbraco configuration to solve this problem? Thanks in advance for the help.
I also tried to deploy it in the IIS of my local development machine (the same in which it runs OK in IIS-express) which has the right framework and everything and I got the same cshtml display in the browser.
After struggling a bit more with the problem I found the issue causing this behavior. After installing the starter kit a lot of files are generated in the folder and subfolders of the solution. In order to publish the solution to generate the contents of your website the VS project needs to have all these files included as project files. I found out that some views were excluded of the project and thus not being generated when publishing. I included the missing views and double check that all important files were part of the project and problem solved.
I hope I'm asking this question in the right place. I also asked on umbraco forum, but did not get any response yet.
I'm having problem with deploying my Umbraco 5 website to external hosting.
On local machine, I used Umbraco 5 template for VS2010, which works fine (although it's quite slow).
When I publish to live server I get 500 error.
So far, i've tried installing fresh copy of umbraco on hosting (works fine).
I copied config files in hive provider folder (in App_Data), to point umbraco to my hosting database. That does not throw any exceptions yet. Problem starts when I copy views and partial views over - umbraco then finds the template defined in database and tries to load that.
It's worth mentioning that I also copied my project.dll file into bin directory on the server - the reason for that is because I have added new controller which inherits from surfacecontroller (in /Controllers folder).
Please let me know if I'm doing something wrong.
Cheers
Sebastian
It is not any different than deploying a MVC3 website.
There are quite a few questions with exactly that signature here on so.
Visual studio even has a few tools to help you in the process.
The publish function is found right clicking the project in the solution explorer.
If you use the template for developing, you have a working umbraco solution locally right?
If that is the case, it is easier to just deploy / publish the entire site intead of copying bits into another umbraco solution.
Publish tool
When using that tool, remember that umbraco has quite a few config files etc. and they all need to be included. So it is probably the easiest to just export all files in the folders, by changing "which files to include" setting in publish tool. That will unfortunately include all your .cs files too, but later they can be filtered out of the publish process.
First make it work, then make it awesome :)
The same goes for compilation mode, i have found that release mode sometimes breaks things, so for now just keep it in debug mode.
Then later when you have it working, you can change to release mode for a small performance gain.
Stuff to remember
include all necessary files
change connectionstrings
copy databases
custom errors, you don't want your visitors to see YSOD's with your internal debugging info.
disable tracing and debugging!
After reading this, you should go on and look for other more elaborative resources too.
"umbraco then finds the template defined in database and tries to load that" is key point to me
whatever the version you follow the templates and doc types are the backbones of umbraco ( from you website I know that you are aware with above more then me.. but repeating.) I mean you have created new website but there are no relative Templates and Doctype yet you try to use them in views and subviews and that caused the problem.
To do that please create tempalte and doctype same as is in you staging site and this problem will be solved.
Even better kick-start you development with new site only and make replica of that after defining doc-type and templates to your staging.
I hope i can explain my point.
Thanks,
Jigar
I've had problems in the past deploying Umbraco 5 projects. When you deploy an Umbraco 5 website to a new server and before you switch the website on in IIS, navigate to \App_Data\ClientDependency and delete any XML files that are there. Next, navigate to \App_Data\Umbraco\HiveConfig and delete the ConfigurationCache-*.bin files.
Once you've done that, recycle your Application Pool and start your website.
This used to work fine, but recently it refuse to load the default page for an empty route, instead it lists directory contents.
for example
http://localhost:1234/ should take me to the same page as http://localhost:1234/Home/Index assuming global.asax hasn't been modified, however recently it just takes me to "Directory List -- /" and lists out the content of the project folder.
This is using the ASP.NET Development Server. The sites work fine when deployed into IIS on a server.
Does anybody have any ideas, this is really annoying!
I would check the project settings like suggested on this other question:
Launching my debug MVC3 application opens a specific .cshtml file in the browser
Through trial and error I've determined that this is caused by the IBM RTC plug-in, when disabled it works normally.
I find this very surprising, but I've double checked and it is definitely that!
I have reading posts all night looking for an answer to my issue and haven't found anything that works for me yet. I am sure there is a simple way to do this but I haven't been able to discover it yet.
Details:
MVC 2 Preview
Asp.net 3.5 sp1 framework
VS 2008 C# web application
Windows Server 2008
IIS 7
I have the application running well through VS 2008 no problem. When I hit the play to run in debug mode it starts the ASP.NET Development Server the application loads fine and works as expected, great!
When I publish the application locally or to my web server both on IIS 7 the application doesn't run correctly. Some of the icons are missing and the google maps map is missing. When I view the source it appears correct at first glance, but I can see the paths to the images are looking for the MVC paths and it isn't finding them. It appears the app is running as a regular asp.net app and not an mvc app, maybe?
I also tried to just hit the full source code locally on localhost and the exact same issue is present.
So, I guess my question is how do I deploy a MVC application to run the same in IIS as it does through the development server.
PS The environments are clean and pretty much out of the box.
#user68137 is correct in saying that you need to use relative paths for the images.
I got caught out on this one too, and here's my previous SO question about it...
In short, you need to do something like this...
<img src='<%= Url.Content( "~/Content/Images/banner.jpg" ) %>' alt="Banner" />
Hope this helps!
I had the relative paths set, but what I didn't realize is when I deployed it to the server it went to wwwroot\subsite... I had the relative paths set to src="....\image.jpg" to get back to the root of the site. My error was that if the site is not in the root then the subsite drills back to the root to find the images and of course doesn't find them. Same thing was happening with the JS files. I used the Url.Content and it worked great! problem solved!
The interesting this is when running through the VS dev server with a subsite it still worked well and found the paths even though it shouldn't have. VS dev server <> IIS
Thanks for your help on this!
Simon.
Once you know the virtual path to the location you are deploying the project to, you should go into the project configuration in Visual Studio and add it to your project. This way the visual studio development server will use the same path structure as the deployment server. This will save you countless hours of work when deploying.
When you run your website through Visual Studio, every single request gets processed through the ASP.NET pipeline, including images, CSS and other resources. IIS by default only processes specific extensions (e.g., aspx) unless you tell it otherwise through configuration. Paths like '/content/images/yourimage.jpg' should work just fine...I suspect it's something amiss in your IIS configuration.
Another possibility which I've run into is any custom ISAPI filters you may have installed on the IIS server (e.g., ISAPI_rewrite). It's easy to set up rules in its configuration that lead to some very unexpected results.
I have a project that compiles and runs fine on my development machine but when I run it on the web server I get the following error.
Parser Error Message: The file '/Views/Shared/Main.master.cs' does not exist.
The file mentioned does not exist on the server but the file '/Views/Shared/Main.master' does.
I use the 'Publish' command to upload the project. Is it missing the cs files?
Is there some setting where it does just in-time compiling that need to turn off?
I stumbled upon this solution.
The master page has the following attribute CodeFile="Main.master.cs". When I replaced this with CodeBehind="Main.master.cs" it works as expected.
The file originally came from an older web application but I don't know what the difference means. If someone else can come up with a better explanation I will accept their answer instead of this one.
Glad you got it figured out. It may come from an issue when converting from "Web Site" to "Web Application" project type.
http://aspadvice.com/blogs/ssmith/archive/2007/01/24/CodeFile-or-CodeBehind.aspx
Usually the files are marked with a reference to a dll that exists in the bin, e.g. App_Web_nnnnn in the inherits declaration of Main.master. Is that the case for that file on the web server and does the referenced dll exist in the bin? If not then it may not be pre-compiling as it should.
As far as I have seen with MVC, I don't think you even need the code-behind pages, do you?
I have removed the references from any pages in my app that were there for any reason.
Also, when you create a new View, I don't think it even creates the code-behind page in MVC, does it? (Really threw me to start with!!)