Can't add a subclass in XIB - ios

I have a scroll view that loads a series of XIBS as pages. One of the XIBs (iPhoneFirstPage) is a UIView that has a twitter button that I would like to link to another ViewController in the XIB. The only problem is when I create a subclass of UIView to add an IBAction to the button, the subclass doesn't show up under the "Custom Class" drop down on the UIView. How would I do this? Is there a better way?

Save both files (Cmd + S) and try again.
Cmd+Shift+K to clean and try again.
Just type the name in--it should build fine assuming you've typed the right name and it can find the file.
Restart Xcode and try again.
Note: This is a list of 4 different things to try. Any single one of them should correct the problem individually--you shouldn't necessarily need to do all 4 things.

Related

Unable to add IBOutlet in swift

I'm trying to add an IBOutlet in swift but I only have the option to add an action.
Here is an image of what I'm talking about.
]
Is there any way I can fix this?
I can't change connection type either.
This is happening because you are trying to connect an outlet from the Interface Builder to a non-corresponding View Controller file, so that's why it only gives you the option to add an Exit action. Just make sure that you are in the same View Controller both in the IB and in the Assistant Editor.
P.S. I recommend you renaming properly every view controller so it will be easier to avoid this (make sure to change the name not only in the class but also in the IB). You can use the cmd + click when selecting the class name on the code and click on Rename... to change all at once. If you already changed it in your code, you have also to do it then manually in the IB, selecting the corresponding one from the drop-down menu of the Identity Inspector:
Try ctrl dragging it from the text on the left ()
Restart your Xcode and try to connect #IBOutlet
Simply change the connection type or one more thing you can do. you can do this. By opening connection inspector and drag the outlet into view controller like shown in image..
To Change Connection Type
You should use the same class in your view controller (call it View Controller.swift)

Xcode 6: can't connect any IBOutlet to ViewController

After upgrading to Xcode 6, I opened an old project (that contains a subproject, so it has many targets)
and I noticed that no link from my Storyboard ViewContoller to the relative Objects works.
For example I have a ViewController with a TableView inside and now I cant do can't do anyhing with it because the connection is missing, I can't even redefine a new IBOutlet in the VC because the arrow in the storyboard from the VC won't connect to anything.
To be more clear:
The class is defined in the Custom Class section, so I can't find the problem
What should I do?
Btw I'm using obj-c not swift, I found some related answer but all about swift.
You can also see that the link between the parent view and the custom class is broken (not visible anymore) which is a huge problem.
I had the exact same issue with the app i'm working on actually, updating XCode from 5.xxx to 6.1. The workaround that worked for me was to remove the reference of every view controller and re-add them to the project...
To everyone facing that issue, here's the (annoying) trick :
Step 1 : select both .h and .m view controller files
Step 2 : remove the reference of those files
Step 3 : re-add the files to your project tree
Step 4 : open the storyboard, eventually re-build the project and smile
I can understand those things could be reaaally annoying, but it worked for me... Hope it will help someone else !
In your storyboard hierarchy select the View Controller,
In the right pane Custom Class section Class, select the drop down and your desired view controller.
I've experienced similar behaviour in Xcode 6.1.1 when trying to add the first outlet to a new view.
Tried removing the references and adding the files again as suggested above with no success.
What I did find worked was writing the first property on the new view by hand. I just popped in:
#property NSString *temp;
I could then attach my outlets in the normal way. Just delete the temporary property once you've added your first outlet.
Hope this helps.
It seems typing the outlet first (swift):
#IBOutlet weak var someViewOutlet: UIView!
and then dragging from IB the outlet to the far right type in the above code works.
Restarting Xcode resolves the issue (sometimes). Using Xcode 6.1
Maybe I can help
In my case the problem was that the viewController.swift file was not connected to the StoryBoard. The solution is to click in the Upper border of the view on the storyboard beside the 3 icons (View Controller, First Responder and Exit)...now look over in the Utility Area choose Identity Inspector, and in "Custom Class" choose the custom view controller.
Hope this helps. Xcode is hard!!
Here's the proper solution i believe.
If you renamed the controller in code, you need to update the .xib file.
I could not find a way to do it in the interface builder, so do this:
Open the .xib file with a text editor: right click the file > open as > source code
In the <objects> node find the <placeholder> node with the property placeholderIdentifier="IBFilesOwner" and replace the value in customClass="MyOldControllerName" with your new controller name: customClass="MyNewControllerName"
And all your IBOutlets will work as normal again.
Thanks to everyone who commented.
It is a bug of Xcode 6 / 6.0.1. Downloaded and installed the 6.1 version and the problem disappeared.
Maybe try to delete the outlet from the menu in the storyboard (in your screenshot) and drag it again of the element.
Okay, let's check iff it is the lack of a module name.
In your storyboard ViewController, type in the name of module. (the project name)
2.Clcick outside in another field. When you go back to the module field it may say none, but now there will be a dropdown menu entry for your project name.
Select your project name and see if everything is good.
If there are still issues I will post photos.
Seems to be a workspace issue. Try to remove project form a workspace and add it again. It helped in my case.
I had this, affected all projects on my machine, swift and objective c and drove me mad for ages. Finally also noticed that I could not use the refractor to rename classes either.
The fix for me was:
Close xcode
Delete ~/Library/Developer/Xcode/DerivedData (just doing this on its own did not work!!)
Delete all user data for all my projects using the following from the directory that contains all my projects e.g. /src (be careful with this command!):
find . -name 'xcuserdata' -exec rm -rf {} \;
If you want to do it by hand just do the following for all your projects
Delete .xcodeproj/project.xcworkspace/xcuserdata
Delete .xcodeproj/xcuserdata/.xcuserdatad
Get Spotlight to re-index the drive all my projects were on (not sure if this was required
Re-boot machine
Everything sprang back into life !
I was having this same issue.
It turns out I renamed my view controller class and file name. In storyboard, I had the stale value in the right pane, Custom Class -> Class. So the IBOutlets were not aligning because there were none in the missing class, which is where it was expecting to find the defined outlets.
Filling in the correct class name of the View Controller in the Custom Class field in the right pane fixed my issue.
XCode needs to be more verbose if you have a bad class name in the Custom Class fields.
no one solution fixed my same problem...
But i have solved by:
close xcode
renaming the folder of the project
open xcode
and then the outlets will be back again
I hope that this solution is the right one for the people who have the same problem
In Xcode 6.3 I needed to close Xcode and restart the Mac. Restarting Xcode alone didn't do it for me.
I've had 6.3 for a long time and my problem was with new projects I was creating to test some things. Definitely not an upgrade issue this time.
I have Xcode 6.3 and saw similar issue. Finally few edits in .h file resolved my issue. If your interface has IBOutlet defined as
#interface NavigationViewController :UIViewController
{
IBOutlet UILabel *lblName;
}
change this to and in .m file add #synthesize lblName;
#interface NavigationViewController :UIViewController
{
__weak UILabel *lblName;
}
#property (nonatomic, weak) IBOutlet UILabel *lblName;
I was having this same problem, with no view outlet available to link to. The only way I was able to fix it was to change the owner class of the XIB file to "UIViewController," make the link, and then change it back to my intended custom view controller class. The link stayed and all was well.

Storyboard uiviewcontroller, 'custom class' not showing in drop down

I have a UIViewController I created in my apps storyboard, as well as a custom UIViewController subclass which I added to the project (and is correctly in the compile phase for my target). However when I go to set the 'Custom Class' property on the view-controller in Storyboard my custom class does not show up on the list.
Checked that the class is part of my app's target, not tests'
Double checked that it is correctly a subclass of UIViewController
Compiled program just to make sure xcode was working with latest information
Restarted xcode
What would cause my class to not show up in the 'Custom Class' drop down?
Two ways I found that solve the problem but they are work arounds:-
Just type the view controllers name in the text field, or
close the project and then reopen it and in the project initialization it places the file on the list.
If you still have your problem or for those who could have the same problem:
Make sure to select on your storyboard your "ViewController" instead of your "View" (which is automatically selected when you click on the view in the storyboard). The difference between those two is that when the view controller is selected, a blue rectangle pop up around your app. To be sure to select the view controller, open the document outline and select it directly in your storyboard hierarchy.
I would try the following:
Check that the file implementing the class is part of the build phases (check under target > build phases)
Add the .m file to build phases (if it isn't already).
Restart Xcode.
You can fix this by editing the XML of your Storyboard.
Right-click your My.storyboard entry in the Project Navigator panel and select the Open As->SourceCode menu choice. Find your view controller entry in the XML, and add the attribute customClass="MyController".
Save the storyboard.
Right-click your My.storyboard entry in the Project Navigator panel again, and select the Open As->Interface Builder - Storyboard menu choice.
The custom class entry will now contain your MyController class name.
Make sure your class inherits from UIViewController.
#interface ClassName : UIViewController
In Xcode 8, a few of my classes had the wrong path (case sensitive) specified for their file locations.
MyProject/mysubdirectory/MyViewController.xib (.m, .h)
vs:
MyProject/MySubdirectory/MyViewController.xib (.m, .h)
Really not sure how it ended up in that state, but my project exhibited the exact same behavior as above (no outlets/actions displaying in IB), and fixing that path fixed the problem.
I fixed this two different ways. One way was by I opened the .pbxproj file and fixing the case sensitive issue manually. The other way that worked was by tapping the folder icon under the Identity and Type section of the File Inspector tab of the file, and re-selecting the file there.
Click on a different view controller in the storyboard, then click on it's custom class pulldown to confirm the new class is listed, but don't select it. Click back on the new view controller you made and you should see it now listed in its custom class pulldown menu. odd, eh? just forces a refresh I think.
I had been having the same issues as described in this problem. However, none of the suggested answers fixed it for me. My project compiled OK without warnings or errors, but, in the .h file there were no 'outlet' indicators to indicate that my outlets had been linked to storyboard elements.
Additionally, attempts to create new outlets in my code, by right-click and dragging into my header file, were not recognising my header source as a potential target for this operation. And furthermore, my Class did not make an appearance in the Custom-Class dropdown for the ViewController's property inspector panel.
And yet, the project compiled OK.
Closer examination showed that I had defined my own class in the following manner...
#interface KJBMainDataViewTrackConMk2<UIScrollViewDelegate> : UIViewController
which apparently compiles nicely.
But, if this is changed to the following, (moving the protocols to the end)...
#interface KJBMainDataViewTrackConMk2 : UIViewController<UIScrollViewDelegate>
Then everything springs to life. All outlets are suddenly indicated as being 'connected' with a storyboard element. And right-click dragging starts to work again, and my custom class appears in the custom-class drop-down in the property inspector panel for the storyboard ViewController!
Other answers here probably represent the most likely causes of this condition, but, I felt it worth mentioning at least this one other potential cause.
I had the same problem, but none of the other solutions worked for me. The issue for me was that I had a Mac and iOS target, both with their own versions of the same view controller. For example, I had a .h/.m pair of files named FooViewController for Mac and another .h/.m pair of files named FooViewController for iOS. Each pair was properly included with their respective targets, but for some reason Xcode does not like it and my view controller would not show up in the Custom Class dropdown in the view controller in the storyboard. I ended up renaming my class in the iOS view controller and it immediately showed up in the dropdown.
In my case, I drag a new TableViewController object to the storyboard, but I add a new file which's subclass is "UIViewController".... Then, I add a file which's subclass is "UITableViewController", problem solved!!
For those of you who are still having this problem after trying all the way around is probably because you clicked the View instead of ViewController.
You have to choose the file when ViewController is clicked.
This solved my problem.
I happened to come across this problem, and had no luck after trying the previous suggestions. Finally I found the reason is the header file's type is set to C++ header. After changing it to C header (like all the other header files), the class appears in the drop list. Don't know why though... Possibly helpful for others so I post it here.
Storyboard is looking for the custom class but physically its no there and its not displaying the custom class name in the list and also not displaying the outlets . Following solution perfectly worked for me.
Just copy your code some where else.(Lets say on desktop)
Open your existing code.
Delete the custom class file.(Move to trash)
Now add files from copied project folder (From desktop)
Don't forget to check "Copy if needed" check box
Open the story board and bingo you will get your custom class files in dropdown
be sure initially not adding the CustomViewController to any group or folder. place it in the root of your app.
none of the above(or below :) helped me. though I found that
after adding new viewcontroller to storyboard (just by dragging it in)
and adding my class by File\New\File\Objective-C Class, give it a name, no XIB, Next, Create
if I select my viewcontroller in storyboard and try to assign my class to it - my class is not there
BUT
if I click on a view that is in the viewcontroller itself then click on a class dropdown menu in Custom Class
AND THEN
select viewcontroller (click on a bar below the viewcontroller) and now again click on a class dropdown in Custom Class my newly added class magically shows up.
weird, must be a bug with refreshing. Xcode Version 5.1 (5B130a)
Make sure you select View Controller to which you want to attach your class. The easy way is open Document Outline and choose your view controller (When you tap on it form the Storyboard sometimes it simply doesn't choose the object you meant).
for my case, somehow bundle resources got deleted, so I added back and worked!
Build Phases -> Add Build Phase -> Copy Bundle Resources
find your file
Then drag and drop your file there
Then make sure your target membership is checked.
In my case, I selected the wrong UI.. so I deleted the class file and created a new one and selected the correct parent class
I had to restart XCode 7.3 (7D175)
What worked for me was, click on the file in the Project Navigator, then, in the File Inspector under "Identity and Type" beneath the "Location" dropdown box, click on the little folder icon and then select the file in the popup window.
Try to clean your project, and also restart your Mac. One peculiar thing that I did was change all the Custom Classes names and build the project again. It worked!
For macOS projects, creating a new class generated a class inheriting from NSObject instead on NSViewController.
Change from
import Cocoa
class AppsViewController: NSObject {
}
to
import Cocoa
class AppsViewController: NSViewController {
}
I was fairly frustrated with this issue as none of the answers above had solved my problem.
In my case: I was in the middle of working on swift view controller file and was making active changes (such as creating a custom collection cell class). I had not finished the code block and left it open like so :
class tableViewCell: UITableViewCell {
}
class collectionCell:
class viewController: UIViewController {
override func viewDidLoad(){
super.viewDidload()
}
}
Note the incomplete code block 'collectionCell2'
This was enough for xcode to not recognize my viewController file as such.
Once I completed this block the file reappeared in my xcode as an option.
Very silly and simple.
Make sure the view controller is matching with the same Type in the storyboard .
In my case swift file name was different then swift class name i.e
file name was ViewControllerTest.swift
and class name was ViewController.swift
after changing both to common name solved my problem
Restart Xcode after above changes
Make sure the class name of the ViewController is the name that you want. i.e.
class MyCustomNameViewController: UIViewController {
.
.
}
Changing just the filename is not enough.

How to call one xib file from another class,ios

I have googled a lot, but some where I am doing a mistake regarding the xib file. I have four buttons in view controller.xib file. Then when I tap the button one two three, alertinputtypetext has to be dislayed. Its done successfully.
But when i tap the fourth button, I need to display pickerView.xib. But when I am debugging the application, the application sequence is missing and showing the main.m class.
Please help me somebody. Give me hint to proceed further.
"I need to display the another file pickerView.xib" ?.. if pickerView is UIViewController subclass you could show it simply .. if its just a nib file contains a pickerView , you could use loadNibNamed:(NSString *)name owner:(id)owner options:(NSDictionary *)options , but actually you don't need to put it in separate nib file .. xib can hold more than one view inside it , so you could use you original viewController.xib , or what I prefer is to it programmatically without loading it from xib.

additional NIB for view controller in tabbed app

{Xcode 4.2, deployment target iOS4.3, not storyboard, using ARC}
I started with a tabbed application template & chose the universal platform, which nicely gives me view controller classes & NIB files for an iPhone (ClassName_iPhone.xib) & an iPad (ClassName_iPad.xib) for 2 tabs, with an if statement in the AppDelegate to determine which to run - exactly how I wanted it set up.
I wanted to add a 3rd & 4th tabs, so starting with the 3rd tab (doing 1 at a time) I created a new UIViewController subclass. As it doesn't give the option to create both NIBs at once, I selected "Targeted for iPad", & had intended to create the iPhone NIB manually. I added a "_iPad" suffix to the created NIB file, then I created a user interface view NIB file to which I added the "_iPhone" suffix. I then set up the code for the new view controller in the AppDelegate implementation file to include the 3rd view controller & tab, & I used the other view controller classes as a guide to set up the new class's code.
For the 3rd _iPhone NIB, I dragged a view object from the objects library onto the canvas, & set it up as per the other 2 _iPhone NIBs. But when I went to connect the outlets, there is no view outlet in the referencing outlets of the connections panel to connect with, which I thought there should be. At this point I suspected something was wrong.
I tried running it in the simulator, in iPad mode it works fine (all 3 tabs are clickable). But in iPhone mode clicking the 3rd tab crashes it with a "SIGABRT" on thread 1. It's obvious what I did didn't work. I don't see anything in the output window that gives me any clues.
Being a newbie to obj-c, so not being too sure of the problem, I would have thought that I either:
have used the wrong user interface template (view)
should have used a view controller object from the object library
(not a view)
or that I should have declared some outlets in my view controller
class files.
But if I should have done either of the latter 2, then my question would be why does the iPad NIB work then, when it clearly has a view object in the NIB & no outlets declared in the class files (same with the other 2 view controllers for both devices)?
Does the UITabView class somehow have outlets pre-declared within it for the first 2 tabs? But that still doesn't explain why the _iPad NIB works.
As usual, any help & advice much appreciated, & if there's a link to an explanation somewhere that I've missed, please show me, because I'm happy to do the research.
If what I've done wrong here is not determinable, then I guess ultimately what I'm asking is a clue to how best to create the second NIB file for iPhone to mesh with the class created with iPad NIB.
Sorry to answer my own question but with further searching I found this answer that was the solution, although not quite the whole story. So I thought to put what I did in an asnwer so others can refer to it.
As Piotr Czapla explains in the linked answer, for some reason Xcode doesn't populate the connectionRecords data, as you can see by my first red arrow. Having a look at the view controller that works (where second red arrow is), that's what the data should look like. So the answer is to cut the data & paste it into the NIB file, or type it. You can do this in Xcode by right-clicking the NIB file in the project navigatior & then Open As > Source Code, which is what you see in my screenshots.
The bit I want to add to Piotr Czapla's explanation though is the destination reference pointed to by the second red arrow might not be correct for the NIB file you're pasting into (mine wasn't) & Xcode might not let you go back into IB mode. If so, you need to get the correct reference from the IBUIView class within your NIB file, as pointed to by the third red arrow. Once I copied that reference to my destination reference ref=, as shown by the fourth red arrow, all was ok & the problem was solved. I could then go back into IB mode (right click, Open As > Interface Builder - iOS) & the view works in the simulator.

Resources