When I run the following commands I am getting the below output:
sudo docker run ubuntu /bin/echo hello world
WARNING: WARNING: Local (127.0.0.1) DNS resolver found in resolv.conf and containers can't use it. Using default external servers : [8.8.8.8 8.8.4.4]
And when I run docker version, the output is:
mkdir /var/lib/docker/containers: permission denied[/var/lib/docker|a0f30ece] -job initserver() = ERR (1)
2014/03/03 21:49:51 initserver: mkdir /var/lib/docker/containers: permission denied
What is the problem?
My Problem solved by following :
Try modify the /etc/default/docker file, un-comment the OPTS line:
6 # Use DOCKER_OPTS to modify the daemon startup options.
7 #DOCKER_OPTS="-dns 8.8.8.8"
Related
Running Windows-based containers I am unable to access the internet from within. Example:
From my host machine I can run the following command:
PS C:\Developer> nslookup aka.ms
Server: cache100.ns.tdc.net
Address: 193.162.153.164
Non-authoritative answer:
Name: aka.ms
Address: 88.221.62.148
When I try to do this from inside a container:
PS C:\Developer> docker run mcr.microsoft.com/dotnet/framework/runtime:4.8-windowsservercore-ltsc2019 powershell nslookup aka.ms
*** UnKnown can't find aka.ms: Server failed
Server: UnKnown
Address: 172.28.112.1
While I am not specifically interested in aka.ms, this error happens for all services I try to connect to, so I am not able to install external libraries, etc.
I am running Docker Desktop v19.03.12. The behaviour occurs regardless of whether I have WSL 2 enabled or not, and my Docker setup is all defaults.
Note: I have some time ago experienced this behaviour. Back then I added the following snippet to my Dockerfile:
RUN powershell -command certutil -generateSSTFromWU roots.sst && certutil -addstore -f root roots.sst && del roots.sst
To my understanding this would install an SSH certificate, which solved the issue. This command, however, now fails:
PS C:\> certutil -generateSSTFromWU roots.sst
The server name or address could not be resolved 0x80072ee7 (WinHttp: 12007 ERROR_WINHTTP_NAME_NOT_RESOLVED) -- http://ctldl.windowsupdate.com/msdownload/update/v3/static/truste
dr/en/authrootstl.cab
CertUtil: -generateSSTFromWU command FAILED: 0x80072ee7 (WinHttp: 12007 ERROR_WINHTTP_NAME_NOT_RESOLVED)
CertUtil: The server name or address could not be resolved
I tested this out on a basic server core image and I got it worked with adding DNS settings.
I connected to the container interactively to test this, but you can probably add the command to a DockerFile too.
docker run -it container powershell
Type netsh to start network configuration
First we look up the network we want to change
( in my case "Ethernet 2")
Then we add an static DNS server to this interface
interface ip show config
interface ipv4 set dns name="Ehternet 2" static 8.8.8.8
exit
nslookup aka.ms
S C:\> nslookup aka.ms
Server: dns.google
Address: 8.8.8.8
Non-authoritative answer:
Name: aka.ms
Address: 23.38.17.26
Reference Docker Networking
Reference howto
My question is is there any notable difference between running Docker-Machine as a snap vs built from a source ? I'm having networking issue and I suspect it may be related to the type of installation.
this is what I get when I try point active host to the Docker:
executing: docker-machine env instance
output:
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host
after executing: docker-machine -D regenerate-certs instance
output:
SSH cmd err, output: fork/exec /usr/bin/ssh: permission denied:
Error getting ssh command 'exit 0' : ssh command error:
command : exit 0
err : fork/exec /usr/bin/ssh: permission denied
Changing permissions for the mentioned directory didn't help.
I'm using Window Linux Subsystem (Debian stretch). Followed the instruction on Docker website, I installed docker-ce, but it cannot start. Here is the info:
$ sudo service docker start
grep: /etc/fstab: No such file or directory
[ ok ] Starting Docker: docker.
$ sudo service docker status
[FAIL] Docker is not running ... failed!
What should I do with /etc/fstab not found?
to fix fstab
touch /etc/fstab
if you run dockerd, it will give you the failed message:
INFO[2022-01-27T17:55:14.100489400+07:00] Loading containers: start.
WARN[2022-01-27T17:55:14.191666800+07:00] Running iptables --wait -t nat -L -n failed with message: `iptables v1.8.2 (nf_tables): CHAIN_ADD failed (No such file or directory): chain PREROUTING`, error: exit status 4
INFO[2022-01-27T17:55:14.493716300+07:00] stopping event stream following graceful shutdown error="<nil>" module=libcontainerd namespace=moby
INFO[2022-01-27T17:55:14.494906600+07:00] stopping event stream following graceful shutdown error="context canceled" module=libcontainerd namespace=plugins.moby
INFO[2022-01-27T17:55:14.495048400+07:00] stopping healthcheck following graceful shutdown module=libcontainerd
failed to start daemon: Error initializing network controller: error obtaining controller instance: failed to create NAT chain DOCKER: iptables failed: iptables --wait -t nat -N DOCKER: iptables v1.8.2 (nf_tables): CHAIN_ADD failed (No such file or directory): chain PREROUTING
(exit status 4)
that is Debian nat issue, fix it with:
sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
now you can start the service again
you can follow this to make it start on startup https://askubuntu.com/a/1356147/138352
Edited:
if the issue with IP table still persisted try to set WSL version to 2, run the command from Windows shell:
wsl --set-version <distribution name> 2
the distribution list can be found with command wsl -l
I was getting the same error. Apparently on my install of WSL with Debian, I didn't have an etc/fstab file. Surprisingly, just creating the file via 'touch' worked:
sudo touch /etc/fstab
Perhaps a good signal https://learn.microsoft.com/en-us/windows/wsl/release-notes#build-17093
WSL now processes the /etc/fstab file during instance start [GH 2636].
For anybody stumbling across this years later like me, Docker doesn't work inside WSL.
But you can use Docker for Windows and WSL2 to run native containers inside your Linux Distro and the install and config is quite painless https://learn.microsoft.com/en-us/windows/wsl/tutorials/wsl-containers
I've tried to live migrate a wildfly-container to another host like described here. The example with the np container works well. When I replace the example with a simple jboss/wildfly container, I just received this error when criu tries to restore the container on the other host :
Error response from daemon: Cannot restore container <CONTAINER-ID>: criu failed: type NOTIFY errno 0
Error: failed to restore one or more containers
Because I didn't found a solution to this error, I've compiled the linux kernel like described on the criu website and here.
After that sudo criu check prints:
Warn (criu/libnetlink.c:54): ERROR -2 reported by netlink
Warn (criu/libnetlink.c:54): ERROR -2 reported by netlink
Warn (criu/sockets.c:711): The current kernel doesn't support packet_diag
Warn (criu/libnetlink.c:54): ERROR -2 reported by netlink
Warn (criu/sockets.c:721): The current kernel doesn't support netlink_diag
Info prctl: PR_SET_MM_MAP_SIZE is not supported
Looks good.
criu --version
Version: 2.11
docker --version
Docker version 1.6.2, build 7c8fca2
Checkpoint/Restore for an example shell script example worked very well. But when I want to checkpoint a container
docker run -d --name looper busybox /bin/sh -c 'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'
with
criu dump -t $PID --images-dir /tmp/looper
I receive this output
Error (criu/sockets.c:132): Diag module missing (-2)
Error (criu/sockets.c:132): Diag module missing (-2)
Error (criu/sockets.c:132): Diag module missing (-2)
Error (criu/mount.c:701): mnt: 87:./etc/hosts doesn't have a proper root mount
Error (criu/cr-dump.c:1641): Dumping FAILED.`
I can't find some solutions with these errors. Is there any known solution to live migrate a wildfly-container?
Thanks in advance
Im trying to get a docker-machine up and running on a Ubuntu 14.04TSL server in our network. I have installed docker+docker-machine on the server and im able to create the docker-machine on the server with this command from my computer:
docker-machine create --driver generic --generic-ip-address 10.10.3.76 --generic-ssh-key "/Users/username/Documents/keys/mysshkey.pem" --generic-ssh-user ubuntuuser dockermachinename
The command above creates the docker-machine and im able to list it with
docker-machine ls
Im able to SSH to it by running
docker-machine ssh dockermachinename
but when i try to connect the server with (-D for debug information)
docker-machine -D env dockermachinename
I get the following message
Docker Machine Version: 0.5.2 ( 0456b9f )
Found binary path at /usr/local/bin/docker-machine-driver-generic
Launching plugin server for driver generic
Plugin server listening at address 127.0.0.1:54213
() Calling .GetVersion
Using API Version 1
() Calling .SetConfigRaw
() Calling .GetMachineName
(dockermachinename) Calling .GetState
(dockermachinename) Calling .GetURL
Reading CA certificate from /Users/username/.docker/machine/certs/ca.pem
Reading server certificate from /Users/username/.docker/machine/machines/dockermachinename/server.pem
Reading server key from /Users/username/.docker/machine/machines/dockermachinename/server-key.pem
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "10.10.3.76:2376": dial tcp 10.10.3.76:2376: i/o timeout
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
I really need to solve this so all help is appreciated!
On Ubuntu you will need to do following steps:
1. Create user which don't require password
sudo visudo
at the end of file add following line (make sure to specify your username):
username ALL=(ALL:ALL) NOPASSWD: ALL
and then save and exit. And after that add your username to docker group like this (change username with your actual username):
usermod -aG docker username
2. Edit docker config to open 2375 and 2376 ports
sudo systemctl edit docker.service
add following snippet to that file:
[Service]
ExecStart=
ExecStart=/usr/bin/dockerd -H fd:// -H tcp://0.0.0.0:2376 -H tcp://0.0.0.0:2375
then save and exit. After that reload config and restart docker deamon with:
sudo systemctl daemon-reload
sudo systemctl restart docker.service
3. Create docker-machine
Remove existing machine which is failing with:
docker-machine rm machine1
and try to create it one more time like this:
docker-machine create -d generic --generic-ip-address ip --generic-ssh-key ~/.ssh/key --generic-ssh-user username --generic-ssh-port 22 machine1
please change ip, key, username and machine1 with you actual values.
If this produce error like this:
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.0.26:2376": tls: oversized record received with length 20527
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which might stop running containers.
then SSH to your machine and cd into following directory:
cd /etc/systemd/system/docker.service.d/
list all files in it with:
ls -l
you will probably have something like this:
-rw-r--r-- 1 root root 274 Jul 2 17:47 10-machine.conf
-rw-r--r-- 1 root root 101 Jul 2 17:46 override.conf
you will need to delete all files except 10-machine.conf with sudo rm.
After that remove machine you created and create it again. It should now work. I hope this helps. Maybe you already steps 1 and 2 if so then skip them and just try to remove override.conf file or any file in that dir which is not 10-machine.conf.