I'm trying to use the Bundling and Minification feature on a Umbraco 7.0.4. I'm getting a 404 error. I've manually added my virtual prefix path in web.config ("umbracoReservedPaths" variable) but it still not working.
I also added the version 1.1.0 of Web.Optimization nuget running the command:
Install-Package Microsoft.AspNet.Web.Optimization -Version 1.1.0
Any ideas?
For some reason, the Global.asax Application_Start is not executed. I had to use WebActivator to "simulate" this bevahior. In there, I call BundleConfig.RegisterBundles() and it works.
Related
We have upgraded our project from grails 1.3.7 to 2.4.4 version. In this we are facing some issues. Each and every time when we do some changes in controllers or services, we have to recompile the entire project once again. So that our development time gets affected. Currently using grails 2.4.4 version and STS 3.6.4 as IDE. Using older grails versions 1.3.7 and 2.2.4, this problem does not arise.
What's the solution to overcome this recompiling problem? How to make the changes to be affected without recompiling each and every time.
Is there any alternative IDE to work with grails 2.4.4 to overcome this recompiling issue, if this issue persists in STS 3.6.4 IDE.
Thanks in Advance!!
What error are you seeing, when you say "we have to recompile the entire project once again"?
I have a Grails 2.4.4 project where there is a (temporary) conflict between the maven repository and the local 'lib' folder, and this causes a 'ClassNotFoundException' error unless you do 'grails clean refresh-dependencies'.
A workaround that I discovered for that is to save a meaningless change to BuildConfig.groovy, like adding text to a comment line in BuildConfig each time before doing 'run-app' or 'test-app'. Then that 'ClassNotFoundException' goes away.
I have been learning Groovy/Grails Tool Suite (GGTS) 3.6.4, with Grails 2.4.4 using some video tutorials. When I attempt to package the project into an application using the grails war command on the Windows command prompt, I get the following error:
"Error Gradle build terminated with error: Task 'assemble' not found in root project ..."
Any references to this error that I have found online have only involved Android Studio (for instance), so I am at a loss here as to how to fix it for GGTS.
I have Android Studio 1.0.1 installed, and in case it was affecting the Grails packaging, I tried the solution of removing the <component name="FacetManager"> from the general Android Studio "MyApplication.iml" file, but that had no effect. I couldn't find any analogous file for the GGTS.
In case the issue lies elsewhere in my overall installation, I have Java JRE 7_79 (64-bit) installed, as well as the the JDK 1.7.0_79 (64-bit)
OK. I found out what the cause of the error was, and how to avoid it in the future.
The Problem
Grails 3.0.1 requires the following files for grails war to work:
build.gradle
gradle.properties
gradlew
gradlew.bat
\gradle (directory)
Grails 2.4.4 does not require any of the above files for making a WAR file.
GGTS 3.6.4 does not work with Grails 3.0.1, but it comes with and works fine with Grails 2.4.4.
The Solution
Copying the stated Gradle files & directory to a GGTS project folder fixed the problem. However, I wasn't satisfied with needing to do this manually or with a custom batch file for every project.
Looking deeper, it turns out that when working out compatibility issues between the Java 32-bit JRE existing on my system and the Java 64-bit JRE & SDK, Grails, and GGTS versions (there was a lot of fiddling to get things working), at one point I had set up my global variable to Grails to be directed at 3.0.1, and I failed to update it to Grails 2.4.4. Making this change has fixed the issue.
Explaining the Cause
When following this video series on installing a compatible set of Java, Grails, and GGTS, the instructor manually downloaded the latest version of Grails from the Grails site and then downloaded GGTS separately from its own site. Both of these were older versions than what I was working with.
In my case it turns out that, after setting up the Java SDK & Grails, the latest version of GGTS (3.6.4) did not work properly with the latest version of Grails (3.0.1). Fortunately the GGTS bundle came with an older version of Grails (2.4.4), and by referencing that, GGTS would work correctly. However, although I changed the IDE reference to Grails, I forgot to reset my environment variable ...
So GGTS was setting up the project for using Grails 2.4.4. However, when calling grails war, the command was using Grails 3.0.1! Apparently these two versions of Grails use different files for creating a WAR file, so GGTS was not setting up the project directories with the correct local files, and the packaging was failing.
Avoiding Future Occurrences
So, when using GGTS 3.6.4, make sure that all references to Grails point to Grails 2.4.4.
In general, if any GGTS bundle contains a version of Grails, you should have everything set up to use that version, even if it is old.
I’m trying to upgrade Grails to version 2.2.0. I used gvm and installed Grails 2.2.0. After this I changed my project in GGTS to use Grails version 2.2.0 and Groovy version 2.0.0. But when I finally tried to run the project, I got the following error:
Error occurred during initialization of VMError opening zip file or JAR manifest
missing : null
agent library failed to init: instrument
What is the problem?
We had the same problem.
This is due to eclipse saving old run configuration for the previous grails version.
Just remove old launch configuration and retry.
To remove old launch configuration :
go to Run\RunConfiguration\Grails
select all nodes and remove them.
I had the same problem when I started using Grails 2.2.0 - The solution Ian mentioned works, here is the link to the issue and resolution that occurred in my project
Grails 2.2.0 error
Added on 1/15/2013 Other suggestions based on 2.2.0/ivy cache issues
I am running on windows, a couple of things to try.
Based on your error message seems like the issue might be related to the Ivy cached, I would suggest cleaning that out using the clean command.
I would also go ahead and delete the Icy cache folders on your machine at \ivy-cache(after backing it up just in case)
Read grails documentation at http://grails.org/doc/2.0.0/guide/gettingStarted.html, refer to section 2.3 regarding Ivy cache – there might be issues running 2.x and 1.x grails projects side by side.
When install, I do not have to install groovy explicitly - I just install grails and that take care of the groovy code implicitly. Is that possible for you to do? To rule out dependency issues?
On my version of grails I have the groovy version showing up as 2.0.5 – I assume you meant grails 2.2.0 – can you ensure that you have a groovy version installed with is compatible with grails 2.2.0?
If possible try your code on a fresh device where grails has not been installed before. This is to rule out interference due to other existing issues
It's a known issue to do with the fact that the version of the springloaded reloading agent used by 2.2 (and 2.1.3) has a different name from that used by previous versions of Grails. There's a workaround in the bug report, or you can upgrade to a nightly build of GGTS which knows about the new name (as described in this bug report).
I am using GGTS 3.2 with Groovy compiler 2.1.1 on Windows XP.
Had imported a project from GGTS 3.1, upgraded compiler to 2.1.1 and got in mess, so
deleted the project and removed it from .grails cache, then re-created project from scratch. When it came to running the project I got the ivy error.
Removing the old launch configuration via Run->RunConfiguration...Grails fixed problem without switching to a night build of GGTS.
(BTW Deleting ivy-cache didn't help at all)
What steps will reproduce the problem?
1.create grails project on STS: 2.9.2
2.Open plugin manager, install form builder plugin.
1.Create grails project on NetBeans IDE 7.0
2.Open Grails Plugins. install form builder plugin.
1.Create grails application using command grails create-app test
2.install form builder plugin.
What is the expected output? What do you see instead?
Each time i was expecting plugin should install and i can run application, but getting several dependencies. I tried with/without changes made in BuildConfig.groovy.
What version of the product are you using? On what operating system?
I am working on
Java: 1.6.0_29; Java HotSpot(TM) Client VM 20.4-b02
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
with grails 2.0.4
I have installed STS 2.9.2, STS 2.5.1, Netbeans 7.0 with grails plugin
Please provide any additional information below.
Each time i tried to install plugin it is showing me some run-time dependencies for jquery, jquery ui and others, I tried to install all plugins before installing form builder plugin. Now it is showing me some class missing
net.sf.json-lib:json-lib:2.4.
some time it is showing me error about
C:\Documents and Settings\jitendrakarma.grails\2.0.4\projects\FormTest\plugins\form-builder-0.1\grails-app\controllers\org\grails\formbuilder\FormController.groovy: 18: unable to resolve class freemarker.template.Template
# line 18, column 1.
import freemarker.template.Template
Please let me know what is wrong with the process i am following.
You are doing everything totally right. The plugin itself does not manage its dependencies correctly. Also it is belonging to some classes that doesn't exists any more in Grails >= 2.x.x
If you add all missing external dependencies and add the following entries to the plugin closure of grails-app/conf/BuildConfig.groovy
compile ":form-builder:0.1"
compile ":jquery-ui:1.8.6"
compile ":dynamic-domain-class:0.2.1"
compile ":jquery-json:2.2"
compile ":freemarker-tags:0.5.8"
compile ":uni-form:1.5"
compile ":jquery-datatables:1.7.5"
compile ":jquery-validation-ui:1.2"
compile ":lang-selector:0.3"
compile ":quartz:0.4.2"
compile ":jquery-form-builder:0.1"
and add the following entry to the dependencies section of the same file
compile 'org.freemarker:freemarker:2.3.19'
you will still get four compile errors.
One of them is: "unable to resolve class org.codehaus.groovy.grails.web.metaclass.TagLibDynamicMethods"
If you look up this class in the grails api documentation you will see it inside the grails 1.3.7 version but it is missing in the 2.0.4 version.
So the best thing I could recommend you is to search for another plugin or doing some code by your own.
Validation for example could be done with a Command on the grails side and the JQuery Validation Plugin on the client side. The form itself can be created with the help of scaffolding. Even if you don't need a domain you could create one run scaffolding to get the resulting form and throw away the domain.
I'm using Netbeans to build a Grails app, while I have used this fine before on this new computer I can not get even the basic project to compile and run. I am getting errors around compiling the Tomcat plugin. If I uninstall the plugin it and use Jetty instead it will compile but the project isn't set up for Jetty and is missing files.
Below is the error I'm getting I'm thinking it is some issue with my classpath but I just don't know where to start any help would be much appreciated.
java.lang.NoClassDefFoundError: org/apache/catalina/startup/Tomcat$ExistingStandardWrapper
Update I have tried grails clean, and used both grails 1.2.0 and 1.3.1
Update The project I've tried with tomcat is the base project generated by grails.
When you say "but the project isn't set up for Jetty and is missing files." what do you have in there that maybe clashing with Tomcat? It sounds like you must be using some specific tomcat functionality.