I'm working on a system that will be used in a single time zone only, but integrates with other systems that exposes dates and times in UTC, so we thought that we go UTC all the way as well. We've also heard from before that storing your times in UTC is the way to go anyway, so it felt like the easiest path to minimize troubles.
Recently though, we ran into some trouble. We are logging events in the system which are of value to the user, so we let the user search and view them. Sweden is in a +1 timezone so an event at 0900 local time will be stored as 0800 UTC time. When showing the events to the user we can successfully transform them back to local time until very recently when daylight savings kicked in. Translating 0800 UTC to local time will now add 2 hours. The logged event now appears to have happened at 10:00. How should I handle this?
In this case, where the stored time is the same time as the time it was actually saved to DB, I could just look at the date and adjust it depending on if DST was on or off at that particular time. However, I think I need a generic solution for this, since there will be timestamps created at various times (at other places) in the system that need to represent future and past points in time. To me it looks like I have 2 options.
Go back to storing local times and just do some extra work when I integrate with other systems that use UTC.
Along with each UTC timestamp store some data that can tell me if a timestamp was created during DST or not.
Am I wrong? Right? Missing something?
You can always get the client timezone offset using the getTimezoneOffset method. Now all that's left is to apply this timezone offset to the UTC date stored in your database and display the correct date to the end user. If on the other hand you need to display the timezone offset used by the user when the event was recorded in your database then you definitely an additional column in your DB to record this offset. Things get tricky when you want to handle multiple timezones: what happens when you want to display a record to a user in India that was submitted by a user in Sweden?
The main thing you are missing is that you cannot just think of Sweden as a +1 time zone. A time zone and a time zone offset are two very different things. Read the timezone tag wiki for more details on this.
Instead, you can take one of the two following approaches:
Think about the time zone in terms of it's IANA tzdb identifier. For Sweden, use Europe/Stockholm. Do your conversions between UTC and local time using this time zone, using a language, library, or platform that implements the tz database.
Instead of figuring out what the client-side time zone is, rely on the client-side operating system to do the conversions to local time. Most environment (including JavaScript in a web browser) can convert from UTC to local time and vice-versa. With this approach, transmit only UTC times between the client and the server.
Also, you didn't ask in the question, but in your title you mentioned future events. That is a very different scenario, and often requires you capture the local time and IANA time zone. See this answer for more details.
You may also wish to read Daylight saving time and time zone best practices.
In iOS, I need to know the actual time (UTC), not the time of the device. In other words, it should not be possible for the user to tamper with the time or date.
Anything that requires a network connection is not good (so accessing a time server is not an option).
AFAIK, there are 2 theoretical ways of achieving this:
Use the timestamp from the GPS satellite signal
Get the current time from the carrier
Problem is that this information is not exposed by any API in iOS.
Is there another way?
Most solutions you could possibly find (including getting GPS data from CoreLocation to access the time information) are flawed because they are depending on the actual device to access time time. You will need to connect to a time server (i would suggest to check for NTP server). I was looking at the core telephony framework and couldn't find anything that would provide the network time. You might want to fill a bug report and request apple to expand one of the classes to include the time.
You could have a look at secondsFromGMTForDate: and secondsFromGMT in NSTimeZone. If the GMT offset increases/decreases when the time of the device is changed, these provide a way to correct your timestamps to GMT (and probably convert to UTC).
You can't get to the raw GPS data and the timestamp property of the CLLocation in locationManager:didUpdateLocations: is set with the system clock
I'm working on a web-app that must handle communicating time of particular events to people across many time zones.
There does not seem to be a reliable way to get a time zone from a client machine in a web app. I realize we can get the offset, but an offset is not a timezone. (among other things, it does not consider DST for future dates).
Is it common, or suggested to provide timezone as user preference, then render all times in that users time zone.
Yes. Store all timestamps in UTC, then convert into the user's timezone. You should be able to come up with a list of timezones that include not only the offset from UTC, but whether or not they use DST (and, for that matter, when they switch to/from DST).
Edit: Specifically, you're looking for the tz database. It will provide pretty much everything you need.
Am developing website like online travel portal. The issue is displaying GMT time for various regions at flight booking and list out the timing. Any one gives idea to calculate and show the time for different countries?
Thanks
Although it is pretty hard to answer your question without a reference to particular technology, I will try.
End user Time Zone detection
Definitely, all time-related information should be presented both in local format and local time zone. By local I mean the one used by end user.
I am guessing that your application will not require creating user profiles. I am also assuming that flight schedules will not be visible on front page and user would need to perform search. In that case you have three choices:
Let user specify time zone from drop down box. I have no way to show you how it should be done without referring to concrete technology. The only thing I must point out is, it should present UTC offset, time zone name and list of cities, for example: UTC+01:00 Central European Time (Paris, Berlin, Warsaw).
You could read current time zone offset with JavaScript and send it out to server
In that case you can use following code snippet to detect offset:
var now = new Date();
var offset = now.getTimezoneOffset();
This will give you current GMT offset in minutes. The problem with that solution is, this offset might be different on the target date.
Obviously you could as well send GMT based dates in invariant form to the browser (for example using ISO8601 format: 2011-05-25T11:07Z) and format this date on the client using JavaScript. I never heard of for example JQuery plugin which would do that correctly (respecting local formats), though. It seems that you would be forced to write your own.
Date and time formatting as well as time zone conversion
Ha, it depends on solution you want to implement as well as technology you want to use. For now, I can't write much here.
Store everything in GMT?
Store everything the way it was entered with an embedded offset?
Do the math everytime you render?
Display relative Times "1 minutes ago"?
You have to store in UTC - if you don't, your historic reporting and behaviour during things like Daylight Savings goes... funny. GMT is a local time, subject to Daylight Savings relative to UTC (which is not).
Presentation to users in different time-zones can be a real bastard if you're storing local time. It's easy to adjust to local if your raw data is in UTC - just add your user's offset and you're done!
Joel talked about this in one of the podcasts (in a round-about way) - he said to store your data in the highest resolution possible (search for 'fidelity'), because you can always munge it when it goes out again. That's why I say store it as UTC, as local time you need to adjust for anyone who's not in that timezone, and that's a lot of hard work. And you need to store whether, for example, daylight savings was in effect when you stored the time. Yuk.
Often in databases in the past I've stored two - UTC for sorting, local time for display. That way neither the user nor the computer get confused.
Now, as to display: Sure, you can do the "3 minutes ago" thing, but only if you store UTC - otherwise, data entered in different timezones is going to do things like display as "-4 hours ago", which will freak people out. If you're going to display an actual time, people love to have it in their local time - and if data's being entered in multiple timezones you can only do that with ease if you're storing UTC.
The answer, as always, is "depends".
It depends on what you are describing with the time, and how the data was provided to you.
The key to deciding how to store time values is deciding if you are losing information by dropping the timezone, as well as not surprising your users.
There are definite benefits in storing data in a UTC time_t - it is a single int, allowing quick sorting and easy storage.
I see the problem as being broken down into specific areas:
Historical Data
Future, Short Term Data
Future, Long Term Data
With the following subclasses on each:
System Provided
User Provided
Let's look at them one at a time.
System Provided: I would recommend running systems in UTC, then you avoid the timezone problem and again, no information loss is seen (it's always UTC).
Historical Data: These are things like system log files, process statistics, tracing, comment dates/times, etc. The data isn't going to change, and the timezone descriptor isn't going to change retroactively. For this type of data, there is no information lost by storing the information in UTC regardless of the timezone it was provided in. So, drop the timezone.
Future, Long Term Data: These are events that are either far enough in the future or will keep happening. If they are kept around long enough, the timezone descriptors are guaranteed change. A good example of this type of data is, "The Weekly Management Meeting". This is data that is entered once, and expected to keep working into perpetuity. For these values, it is important to determine if it is system or user provided. For user-provided data, the time should be stored with the creator's timezone, anything else results in information loss. This information loss becomes apparent when the timezone definition changes and the time is displayed to the creator as having an entirely different value!
As Bwooce has indicated, there is some confusion where the creator and viewer are in different timezones. In that case, I would expect the application to indicate which time values have moved due to a timezone shift from their previous locations.
Future, Short Term Data: This is data that is quickly going to become historical, or is only valid for a short period of time. Examples could be interval timers, rating transitions, etc. For this data, since the likelihood is low that the definition will change between the creation of the value and the time it becomes historical, it might be possible to get away with dropping the timezone. However, I have found that these values have a bad habit of becoming "Future, Long Term Data".
Once you have decided to store the timezone, care must be taken with how it is stored.
Don't store the timezone as an offset, or the full descriptor.
If you store a timezone as an offset, what do you do if the timezone changes? Do you go through the system and do a blanket change on the existing data? If you do, you've now made any historical values incorrect. Good examples of this fault are Oracle and iCal. Oracle stores timezone information as an offset from UTC, and iCal includes the full descriptor for the creation timezone.
Do store it as a name.
This allows the definition of the timezone to change without having to modify the existing values you have. It does make sorting more difficult, since any index that is generated may be invalid if the timezone data changes.
If developers continue to store everything in UTC, irrespective of timezone, we will continue to see the problems that we've seen with the last batch of timezone changes.
At one organisation, the secretaries had to print out the calendars for their teams before the daylight savings date, and then print them out again after the change. Finally, they compared the two and re-created all of the appointments that had moved. Of course, they missed several, and there were several weeks of pain until the old daylight savings date was reached and the times became correct again.
Josh is completely correct above, but I have one subtle caveat to explain. This is a case with no correct answer regarding future events and timezones.
Consider the case of a repeating appointment. It occurs at GMT 0000 (for simplicity), which is 1200 NZST (New Zealand Standard Time) and 1000 AEST in Sydney Australia.
When Daylight Savings comes into effect in one zone, what should occur to the appointment? Should it:
1a. If the TZ change is in the zone of
the appointment's "owner" (who
booked it) then attempt to remain at
the same desk clock time (eg 10:00am)?
1b. If the
TZ change is in one of the other
meeting attendee's zones then no
change
Consequences: It moves for
everyone else, unexpectedly, due to
the owners TZ change, but it stays
"the 10am meeting" as far as the
owner is concerned.
'2. As above, but reversed.
Consequences: It moves for the meeting owner (the 10am meeting becomes the 9am meeting, or v/v), which may be expected but inconvenient. It stays at the same desk clock time for the other attendees until they go through their own TZ transition.
Neither is perfect. Consider the case of two appointments, one booked by Person A that occurs at 10am local time, the other booked by Person B with Person A as an attendee that occurs at 9am. If Person A and Person B are in different TZ's then a DST change could easily cause them to become double-booked.
If your mind is a bit bent at this point then I quite understand.
The point behind this example is that to do either of these behaviors properly you need to know not just the UTC version of the local time, but the TZ (and not the offset) that the owner was in when they booked it. Otherwise you have no choice but to take option 2, silently, without even informing anyone that things have changed since GMT times don't change and only the presentation changes...right? (no, this is the trap, presentation matters when your 10am meeting moves by itself)
I have to credit my colleague and friend Jason Pollock for this insight. Read his view here, and the follow-up discussing iCal and VTIMEZONE here.
Storing everything in GMT/UTC seems most logical to me. You can then show the date and time in every timezone you want.
A few ceveats:
If a time is only specified as a
wall clock time and that is the
leading representation, then it is
not an absolutely specified time.
You should (and cannot) convert it
in any GMT representation. E.G. 9:00
AM every morning. In other words:
this is no (date)time.
If you
save a date and time of a future
appointment, you should use the
offset to GMT specified by the input
timezone and the the moment in time
itself. So if it is an appointment
in summer made in winter in e.g.
western europe, it is +2:00,
allthough the normal (winter time)
offset is +1:00. This will solve the
calender problem that Bwooce
mentioned.
Of course, the same
that applies to using the right
offset while converting to GMT
applies when converting back to a
date and time in any particular
timezone.
Luckily, when used correctly, the (.NET) DateTime type takes care of all the gory details of keeping calendars etc. for you and all of this should be very easy when you know how it works.
Personally, I can't see any reason not to store everything in GMT and then use the users local timezone to display the time as it relates to them.
If you want to display relative time, you obviously still need the time and do a translation, but if you do want to do the translation I think GMT is still your best option.
So I ran a little experiment with MSSQL server.
I created a table and added a row with the current localized timezone (Australia).
Then I changed my datetime to be GMT and added another row.
Even tho those rows were added around 10 seconds apart, they appear in SQL server as tho they're 10 hours apart.
If nothing else, it at least tells me that I should be storing dates in a conisitent manner, which for me, adds weight to the argument for storing them as GMT.
MS Dynamics stores GMT and then at a user level knows your times zone relative to GMT. Then it displays items to you in your time zone.
Just thought I'd throw that out there as that's a pretty big group at MS and this is how they decided to handle it.
i prefer to store everything with the timezone.
the client can decide, which way it should be presented later.
my favorite library for converting is the PostgreSQL-Database.
Have a look here, the w3c have done an excellent job answering the question.
Look at the use cases.
http://www.w3.org/TR/timezone/
Note that they recommend storing datetimes as UTC not GMT, GMT is subject to daylight savings time.
I like storing in GMT and showing only relative ("about 10 seconds ago", "5 months ago"). Users don't need to see actual timestamps for most use cases.
There are certainly exceptions, and an individual application might have many of them, so it can't be a 'one-true-way' answer. Things that need strong audit-ability (e.g. voting), and systems where time is part of the domain of discourse (astronomy, scientific research) might demand true timestamps to be shown to the user.
Most apps, though, are easier to understand with a simple relative time.
I usually just use Unix time. not necessarily future safe, but it works pretty well.
Always store in GMT (or UTC). From there it is easy to convert to any local time zone value.
Dates should be stored as UTC UNLESS it is user provided data and you CANNOT know what timezone the user intended that data to be in. Sometimes (very very rarely) you need to just store the hour, minute, second, day, month and year components without any timezone so you can spit it out back to the user. Now for new developers or if you're unsure, store UTC and you will be 99% correct.
But don't be fooled by believing this works 100% of the time for all cases all the time. It does not.