Related
I have two stored procedures, the first one (SP1) creates a table, and the second one (SP2) uses that table.
I cannot run both SP sequentially in one statement.
CALL SP1();
CALL SP2();
I get an error saying " Could not find table/view..."
when SP2 was created, the table existed due to testing SP1, but now I got rid of all the tables that are created temporarily during runtime SP2 doesn't run.
I realize I can just run SP1 and then SP2 and that will work, but there are 39 SPs and they take about 2 hours when running one after another, so waiting would make the process take even longer.
The only solution I can think of is to just leave the tables that are needed and truncate them rather than drop them. If nothing else can be done I will have to do that, but I rather drop them. The person that created this SPs was evil enough to create over 500 of these tables so I don't want them permanently in my schema.
As a side note, these tables are used for debugging mainly so they can be dropped after a few days of execution, once the processes validated.
I wonder if there is any way to ignore the error or something like or any other workaround.
Thanks in advance for your time and expertise.
Regards,
Leonardo
I found a way to run it regardless of the missing tables.
I just had to put each SP in a different DO BEGIN.... END; block, that seems to be only validating one block at a time and since the previous block creates the table that use going to be used on block number 2, everything seems to be working fine.
DO
BEGIN
CALL SP1();
END;
DO
BEGIN
CALL SP2();
END;
and so on.
The blocks have a bit more things in them, I just put the SP call to simplify them.
I am just leaving this here in case someone else has the same problem as I have.
I would still appreciate it if someone has a better solution.
This sounds a lot like that those tables are in fact temporary tables used to "transfer" data between the different stored procedures.
With HANA it is not necessary nor recommended to dynamically create tables for that use.
Instead, use table variables and "hand over" the data via table typed parameters.
That way, no tables have to be created/dropped at runtime at all.
Also, since table variables are effectively handled as internal, session local temporary tables, a lot of overhead is removed (i.e. those tables don't need to take care of logging or concurrent access) which makes them a lot more lightweight and better performing than dynamically created tables.
Another negative aspect of dynamically creating objects is that this always comes with locking of the database catalog, checking for and invalidating potentially dependent objects, and numerous internal caches.
If possible, one really should avoid this if performance is important.
We see an issue occasionally. Stored procedure running a SQL runs very slow. Same SQL when run from command line runs very fast. It seems stored procedure uses a different path. The workaround for us is to drop and recreate the procedure, after which it picks up the right plan.
Is there a way to execute a stored procedure with an instruction to regenerate execution plan at run time, so as to get the best plan every time.
You probably don't want to recompile plans every time you call your procedure, as you lose the performance benefit of having the procedure in the first place.
When you do need to recompile it, which shouldn't happen too frequently in a stable environment, you can use the REBIND_ROUTINE_PACKAGE system stored procedure:
call SYSPROC.REBIND_ROUTINE_PACKAGE('P', 'YOUR_SP', '')
If you do decide that you want the plan to be recreated each time the procedure is called, you can set the REOPT ALWAYS bind option when you create the procedure, using the many ways described in the manual, for example by executing call SYSPROC.SET_ROUTINE_OPTS('REOPT ALWAYS) before creating the procedure
I need to insert 800000 records into an MS Access table. I am using Delphi 2007 and the TAdoXxxx components. The table contains some integer fields, one float field and one text field with only one character. There is a primary key on one of the integer fields (which is not autoinc) and two indexes on another integer and the float field.
Inserting the data using AdoTable.AppendRecord(...) takes > 10 Minutes which is not acceptable since this is done every time the user starts using a new database with the program. I cannot prefill the table because the data comes from another database (which is not accessible through ADO).
I managed to get down to around 1 minute by writing the records to a tab separated text file and using a tAdoCommand object to execute
insert into table (...) select * from [filename.txt] in "c:\somedir" "Text;HDR=Yes"
But I don't like the overhead of this.
There must be a better way, I think.
EDIT:
Some additional information:
MS Access was chosen because it does not need any additional installation on the target machine(s) and the whole database is contained in one file which can be easily copied.
This is a single user application.
The data will be inserted only once and will not change for the lifetime of the database. Though, the table contains one additional field that is used as a flag to indicate that the corresponding record in another database has been processed by the user.
One minute is acceptable (up to 3 minutes would be too) and my solution works, but it seems too complicated to me, so I thought there should be an easier way to do this.
Once the data has been inserted, the performance of the table is quite good.
When I started planning/implementing the feature of the program working with the Access database the table was not required. It only became necessary later on, when another feature was requested by the customer. (Isn't that always the case?)
EDIT:
From all the answers I got so far, it seems that I already got the fastest method for inserting that much data into an Access table. Thanks to everybody, I appreciate your help.
Since you've said that the 800K records data won't change for the life of the database, I'd suggest linking to the text file as a table, and skip the insert altogether.
If you insist on pulling it into the database, then 800,000 records in 1 minute is over 13,000 / second. I don't think you're gonna beat that in MS Access.
If you want it to be more responsive for the user, then you might want to consider loading some minimal set of data, and setting up a background thread to load the rest while they work.
It would be quicker without the indexes. Can you add them after the import?
There are a number of suggestions that may be of interest in this thread Slow MSAccess disk writing
What about skipping the text file and using ODBC or OLEDB to import directly from the source table? That would mean altering your FROM clause to use the source table name and an appropriate connect string as the IN '' part of the FROM clause.
EDIT:
Actually I see you say the original format is xBase, so it should be possible to use the xBase ISAM that is part of Jet instead of needing ODBC or OLEDB. That would look something like this:
INSERT INTO table (...)
SELECT *
FROM tablename IN 'c:\somedir\'[dBase 5.0;HDR=NO;IMEX=2;];
You might have to tweak that -- I just grabbed the connect string for a linked table pointing at a DBF file, so the parameters might be slightly different.
Your text based solution seems the fastest, but you can get it quicker if you could get an preallocated MS Access in a size near the end one. You can do that by filling an typical user database, closing the application (so the buffers are flushed) and doing a manual deletion of all records of that big table - but not shrinking/compacting it.
So, use that file to start the real filling - Access will not request any (or very few) additional disk space. Don't remeber if MS Access have a way to automate this, but it can help much...
How about an alternate arrangement...
Would it be an option to make a copy of an existing Access database file that has this table you need and then just delete all the other data in there besides this one large table (don't know if Access has an equivalent to something like "truncate table" in SQL server)?
I would replace MS Access with another database, and for your situation I see Sqlite is the best choice, it doesn't require any installation into client machine, and it's very fast database and one of the best embedded database solution.
You can use it in Delphi in two ways:
You can download the Database engine Dll from Sqlite website and use Free Delphi component to access it like Delphi SQLite components or SQLite4Delphi
Use DISQLite3 which have the engine built in, and you don't have to distribute the dll with your application, they have a free version ;-)
if you still need to use MS Access, try to use TAdoCommand with SQL Insert statment directly instead of using TADOTable, that should be faster than using TADOTable.Append;
You won't be importing 800,000 records in less than a minute, as someone mentioned; that's really fast already.
You can skip the annoying translate-to-text-file step however if you use the right method (DAO recordsets) for doing the inserts. See a previous question I asked and had answered on StackOverflow: MS Access: Why is ADODB.Recordset.BatchUpdate so much slower than Application.ImportXML?
Don't use INSERT INTO even with DAO; it's slow. Don't use ADO either; it's slow. But DAO + Delphi + Recordsets + instantiating the DbEngine COM object directly (instead of via the Access.Application object) will give you lots of speed.
You're looking in the right direction in one way. Using a single statement to bulk insert will be faster than trying to iterate through the data and insert it row by row. Access, being a file-based database will be exceedingly slow in iterative writes.
The problem is that Access is handling how it optimizes writes internally and there's not really any way to control it. You've probably reached the maximum efficiency of an INSERT statement. For additional speed, you should probably evaluate if there's any way around writing 800,000 records to the database every time you start the application.
Get SQL Server Express (free) and connect to it from Access an external table. SQL express is much faster than MS Access.
I would prefill the database, and hand them the file itself, rather than filling an existing (but empty) database.
If the data you have to fill changes, then keep an ODBC access database (MDB file) synchronized on the server using a bit of code to see changes in the main database and copy them to the access database.
When the user requests a new database zip up the MDB, transfer it to them, and open it.
Alternately, you may be able to find code that opens and inserts data into databases directly.
Alternately, alternately, you may be able to find another format (other than csv) which access can import that is faster.
-Adam
Also check to see how long it takes to copy the file. That will be the lower bound of how fast you can write data. In db's like SQL, it usually takes a bulk load utility to get close to that speed. As far as I know, MS never created a tool to write directly to MS Access tables the way bcp does. Specialized ETL tools will also optimize some of the steps surrounding the insert, such as the way SSIS does transformations in memory, DTS likewise has some optimizations.
Perhaps you could open a ADO Recordset to the table with lock mode adLockBatchOptimistic and CursorLocation adUseClient, write all the data to the recordset, then do a batch update (rs.UpdateBatch).
If it's coming from dbase, can you just copy the data and index files and attach directly without loading? Should be pretty efficient (from the people who bring you FoxPro.) I imagine it would use the existing indexes too.
At the least, it should be a pretty efficient single-command Import.
how much do the 800,000 records change from one creation to the next? Would it be possible to pre populate the records and then just update the ones that have changed in the external database when creating the new database?
This may allow you to create the new database file quicker.
How fast is your disk turning? If it's 7200RPM, then 800,000 rows in 3 minutes is still 37 rows per disk revolution. I don't think you're going to do much better than that.
Meanwhile, if the goal is to streamline the process, how about a table link?
You say you can't access the source database via ADO. Can you set up a table link in MS Access to a table or view in the source database? Then a simple append query from the table link would copy the data over from the source database to the target database for you. I'm not sure, but I think this would be pretty fast.
If you can't set up a table link until runtime, maybe you could build the table link programatically via ADO, then build the append query programatically, then invoke the append query.
HI
The best way is Bulk Insert from txt File as they said
you should insert your record's in txt file then bulk insert the txt file into table
that time should be less than 3 second.
INFORMIX-SQL 4.10.DD6 (DOS):
Although I'm able to prevent users from viewing source code for perform screens and ace reports by not providing them .per and .ace files, removing SFORMBLD.EXE, SACEPREP.EXE, but .sql procedures are still accesible to them because ISQL 4.10's query processor is interpreted (no way to prepare/compile the sql procedure). I would like to only provide a runtime version of my app where the end-user cannot view, modify or remove tables, sql procedures, etc.
Roughly speaking, you can't.
The stored procedure text is stored in the sysprocbody system catalog. If you're foolhardy, you can delete the text after creating the procedure (there is a 'linearized' version of the procedure stored in sysprocbody too), but it will never be reoptimized if you do that. If you drop an index that the stored procedure was using, it will stop working.
You normally have two or more users setup; one is the DBA (in SE - that is often informix), and then there is one (or better, many) other users that access the DB. Of course, this is DOS, so ownership is more tenuous as a concept, so maybe I'd better shut up about this. However, if DOS and ISQL + SE 4.10 support user separation, then use it.
or better yet, remove isql.exe, dbaccess & sqlcmd!
I need to insert 800000 records into an MS Access table. I am using Delphi 2007 and the TAdoXxxx components. The table contains some integer fields, one float field and one text field with only one character. There is a primary key on one of the integer fields (which is not autoinc) and two indexes on another integer and the float field.
Inserting the data using AdoTable.AppendRecord(...) takes > 10 Minutes which is not acceptable since this is done every time the user starts using a new database with the program. I cannot prefill the table because the data comes from another database (which is not accessible through ADO).
I managed to get down to around 1 minute by writing the records to a tab separated text file and using a tAdoCommand object to execute
insert into table (...) select * from [filename.txt] in "c:\somedir" "Text;HDR=Yes"
But I don't like the overhead of this.
There must be a better way, I think.
EDIT:
Some additional information:
MS Access was chosen because it does not need any additional installation on the target machine(s) and the whole database is contained in one file which can be easily copied.
This is a single user application.
The data will be inserted only once and will not change for the lifetime of the database. Though, the table contains one additional field that is used as a flag to indicate that the corresponding record in another database has been processed by the user.
One minute is acceptable (up to 3 minutes would be too) and my solution works, but it seems too complicated to me, so I thought there should be an easier way to do this.
Once the data has been inserted, the performance of the table is quite good.
When I started planning/implementing the feature of the program working with the Access database the table was not required. It only became necessary later on, when another feature was requested by the customer. (Isn't that always the case?)
EDIT:
From all the answers I got so far, it seems that I already got the fastest method for inserting that much data into an Access table. Thanks to everybody, I appreciate your help.
Since you've said that the 800K records data won't change for the life of the database, I'd suggest linking to the text file as a table, and skip the insert altogether.
If you insist on pulling it into the database, then 800,000 records in 1 minute is over 13,000 / second. I don't think you're gonna beat that in MS Access.
If you want it to be more responsive for the user, then you might want to consider loading some minimal set of data, and setting up a background thread to load the rest while they work.
It would be quicker without the indexes. Can you add them after the import?
There are a number of suggestions that may be of interest in this thread Slow MSAccess disk writing
What about skipping the text file and using ODBC or OLEDB to import directly from the source table? That would mean altering your FROM clause to use the source table name and an appropriate connect string as the IN '' part of the FROM clause.
EDIT:
Actually I see you say the original format is xBase, so it should be possible to use the xBase ISAM that is part of Jet instead of needing ODBC or OLEDB. That would look something like this:
INSERT INTO table (...)
SELECT *
FROM tablename IN 'c:\somedir\'[dBase 5.0;HDR=NO;IMEX=2;];
You might have to tweak that -- I just grabbed the connect string for a linked table pointing at a DBF file, so the parameters might be slightly different.
Your text based solution seems the fastest, but you can get it quicker if you could get an preallocated MS Access in a size near the end one. You can do that by filling an typical user database, closing the application (so the buffers are flushed) and doing a manual deletion of all records of that big table - but not shrinking/compacting it.
So, use that file to start the real filling - Access will not request any (or very few) additional disk space. Don't remeber if MS Access have a way to automate this, but it can help much...
How about an alternate arrangement...
Would it be an option to make a copy of an existing Access database file that has this table you need and then just delete all the other data in there besides this one large table (don't know if Access has an equivalent to something like "truncate table" in SQL server)?
I would replace MS Access with another database, and for your situation I see Sqlite is the best choice, it doesn't require any installation into client machine, and it's very fast database and one of the best embedded database solution.
You can use it in Delphi in two ways:
You can download the Database engine Dll from Sqlite website and use Free Delphi component to access it like Delphi SQLite components or SQLite4Delphi
Use DISQLite3 which have the engine built in, and you don't have to distribute the dll with your application, they have a free version ;-)
if you still need to use MS Access, try to use TAdoCommand with SQL Insert statment directly instead of using TADOTable, that should be faster than using TADOTable.Append;
You won't be importing 800,000 records in less than a minute, as someone mentioned; that's really fast already.
You can skip the annoying translate-to-text-file step however if you use the right method (DAO recordsets) for doing the inserts. See a previous question I asked and had answered on StackOverflow: MS Access: Why is ADODB.Recordset.BatchUpdate so much slower than Application.ImportXML?
Don't use INSERT INTO even with DAO; it's slow. Don't use ADO either; it's slow. But DAO + Delphi + Recordsets + instantiating the DbEngine COM object directly (instead of via the Access.Application object) will give you lots of speed.
You're looking in the right direction in one way. Using a single statement to bulk insert will be faster than trying to iterate through the data and insert it row by row. Access, being a file-based database will be exceedingly slow in iterative writes.
The problem is that Access is handling how it optimizes writes internally and there's not really any way to control it. You've probably reached the maximum efficiency of an INSERT statement. For additional speed, you should probably evaluate if there's any way around writing 800,000 records to the database every time you start the application.
Get SQL Server Express (free) and connect to it from Access an external table. SQL express is much faster than MS Access.
I would prefill the database, and hand them the file itself, rather than filling an existing (but empty) database.
If the data you have to fill changes, then keep an ODBC access database (MDB file) synchronized on the server using a bit of code to see changes in the main database and copy them to the access database.
When the user requests a new database zip up the MDB, transfer it to them, and open it.
Alternately, you may be able to find code that opens and inserts data into databases directly.
Alternately, alternately, you may be able to find another format (other than csv) which access can import that is faster.
-Adam
Also check to see how long it takes to copy the file. That will be the lower bound of how fast you can write data. In db's like SQL, it usually takes a bulk load utility to get close to that speed. As far as I know, MS never created a tool to write directly to MS Access tables the way bcp does. Specialized ETL tools will also optimize some of the steps surrounding the insert, such as the way SSIS does transformations in memory, DTS likewise has some optimizations.
Perhaps you could open a ADO Recordset to the table with lock mode adLockBatchOptimistic and CursorLocation adUseClient, write all the data to the recordset, then do a batch update (rs.UpdateBatch).
If it's coming from dbase, can you just copy the data and index files and attach directly without loading? Should be pretty efficient (from the people who bring you FoxPro.) I imagine it would use the existing indexes too.
At the least, it should be a pretty efficient single-command Import.
how much do the 800,000 records change from one creation to the next? Would it be possible to pre populate the records and then just update the ones that have changed in the external database when creating the new database?
This may allow you to create the new database file quicker.
How fast is your disk turning? If it's 7200RPM, then 800,000 rows in 3 minutes is still 37 rows per disk revolution. I don't think you're going to do much better than that.
Meanwhile, if the goal is to streamline the process, how about a table link?
You say you can't access the source database via ADO. Can you set up a table link in MS Access to a table or view in the source database? Then a simple append query from the table link would copy the data over from the source database to the target database for you. I'm not sure, but I think this would be pretty fast.
If you can't set up a table link until runtime, maybe you could build the table link programatically via ADO, then build the append query programatically, then invoke the append query.
HI
The best way is Bulk Insert from txt File as they said
you should insert your record's in txt file then bulk insert the txt file into table
that time should be less than 3 second.