While installing erlang on cent os I got the following error
Error: Package: erlang-crypto-R16B03-0.2.el6.x86_64 (erlang-solutions)
Requires: libcrypto.so.10(libcrypto.so.10)(64bit)
Error: Package: erlang-crypto-R16B03-0.2.el6.x86_64 (erlang-solutions)
Requires: libcrypto.so.10(OPENSSL_1.0.1)(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I searched around on google and found that the probelm can be solved by installing openssl-devl. So I did that and tried installing erlang again but got the same error.
How can I install the latest version of erlang on cent os 6.4?
How you are installing it? According to Riak's documentation, you use:
sudo yum install gcc glibc-devel make ncurses-devel openssl-devel autoconf
And then, you build Erlang:
wget http://erlang.org/download/otp_src_R15B01.tar.gz
tar zxvf otp_src_R15B01.tar.gz
cd otp_src_R15B01
./configure && make && sudo make install
Installing Erlang on GNU/Linux
You can install erlang using erlang-solution repo
Install repo
wget http://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
Install erlang
sudo yum install erlang
This worked for me on centos7...
sudo yum install epel-release
sudo yum update
wget http://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
sudo rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
sudo yum install erlang
Using EPEL from Fedora is a surefire way on Centos 6. I currently have erlang-crypto-R14B-04.3.el6.x86_64 installed. If you have different repos enabled it could be a conflict or that there is an issue with the package from the other repo (I would recommend disabling whatever repo that provides it or at least ignoring erlang from that repo).
Here is a simple way to install EPEL on Centos
rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm
yum -y install erlang-*
your error is
"Error: Package: erlang-crypto-R16B03-0.2.el6.x86_64"
so you can download&install R16B03
wget http://erlang.org/download/otp_src_R16B03.tar.gz
tar -zxvf src_R16B03.tar.gz
cd src_R16B03.tar.gz
yum localinstall erlang
To install erlang in centos offline.Follow below steps,
We need to have one internet connected machine to download rpm's.
yum install yum-plugin-downloadonly -y
yum install --downloadonly --downloaddir=/home/user/ erlang
All of erlang dependencies packages downloaded as rpm on /home/user/ directory
Now copy all rpm's to offline machine in any directory ( eg., /home/user/ )
Type following command to install erlang with its dependencies too.,
cd /home/user/
rpm -Uvh *.rpm
It's Done!
check using command,
erl
(press Ctrl+c twice to get exit from erl command )
Related
I'm currently building images from python:3.9-slim-bullseye.
I also need the latest version of libleptonica-dev which is only available for bookworm and sid.
Currently, if I run apt-get install -y libleptonica-dev in my Dockerfile, it's installing the 1.79, but I need the 1.82.
Is there a way to install a package from a future debian version even if bullseye-backport doesn't exist ?
IN order to install libleptonica-dev version 1.82 from bookworm in Debian bullseye open the terminal and type:
sudo apt update
wget -c http://ftp.us.debian.org/debian/pool/main/l/leptonlib/libleptonica-dev_1.82.0-3+b2_amd64.deb
sudo apt install ./libleptonica-dev_1.82.0-3+b2_amd64.deb
I'm on a RHEL7.6 attempting to run
docker-credential-secretservice
I've installed it by
wget https://github.com/docker/docker-credential-helpers/releases/download/v0.6.0/docker-credential-secretservice-v0.6.0-amd64.tar.gz && tar -xf docker-credential-secretservice-v0.6.0-amd64.tar.gz && chmod +x docker-credential-secretservice && mv docker-credential-secretservice /usr/local/bin/
when i try to run it by going
docker-credential-secretservice
error:
docker-credential-secretservice: error while loading shared libraries: libsecret-1.so.0: cannot open shared object file: No such file or directory
I thought the libsecret-1.so.0 wasn't installed so i installed it
sudo yum install libsecret-1.so.0
but still gives the same error.
question
how do i install docker-credential-secretservice?
To fix this issue, you need to install libsecret.
sudo yum install libsecret -y
This will install the lastest version of libsecret and you will be able to use it as a credential helper for Docker.
Once installed, you can test it with
docker-credential-secretservice version
On Ubuntu, using apt, I had to specify:
sudo apt install libsecret-1-0
Then docker-credential-secretservice ran with no issue.
I am trying to build a docker container based on amazonlinux which is sort of centos.
One of the packages I need is supervisor and it is not available on the official repos so I have to do it with easy_install or pip.
The problem is that, although I tried installing python-setuptools and python-pip, then when I try to do:
RUN easy_install supervisor
or
RUN pip install supervisor
It says the command doesn't exists
/bin/sh: easy_install: command not found
The command '/bin/sh -c easy_install supervisor' returned a non-zero code: 127
I tried with full path, but same result, and I see other dockerfiles people doing it like that on centos images.
After a while, I found the reason.
By default, yum was installing python26 and the easy_install script runs with python27, so I had to be calling easy_install-2.6 or install the python27 package
Not familiar with AWS's specific image, but for a general centos image, you'll need to install pip or easy_install with a yum command first, which requires the epel repository:
RUN yum -y install epel-release \
&& yum -y install python-pip python-setuptools \
&& yum clean all
Python documented the process in detail on their page here: https://packaging.python.org/install_requirements_linux/
There's also some documentation on this over at superuser: https://superuser.com/q/877759/587488
Can ejabberd be installed on Google Compute Engine? Will there be any issues with using ejabberd on Compute Engine? I have looked but cannot find any references to anyone trying this before. Grateful for any help.
Yes. Compute Engine gives you VMs. You can put whatever you want on them, such as Erlang and ejabberd.
Yes you can.
You can use the Vm with Debian Image and follow this intructions.
http://www.howtoforge.com/virtual-mail-jabber-server-xmpp-with-iredmail-and-ejabberd-on-ubuntu-9.10
dont forget open the ports in the firewall.
Sorry I didn't have much time to put together a cleaner "how to". I just copied and pasted from my personal archive.
Here's what you'd have to do to compile the source code on a Compute Engine. Please let me know if you have any questions.
Image: debian-7-wheezy-v20140408
sudo apt-get update
sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install openssl libssl-dev
sudo apt-get install libexpat1-dev
sudo apt-get install unixodbc-dev
wget http://pyyaml.org/download/libyaml/yaml-0.1.5.tar.gz
tar tar -xvzf yaml-0.1.5.tar.gz
cd yaml-0.1.5
./configure
sudo make
sudo make install
sudo apt-get install xsltproc
sudo apt-get install fop
cd ..
wget http://www.erlang.org/download/otp_src_R16B03-1.tar.gz
gunzip -c otp_src_R16B03-1.tar.gz | tar -xf -
cd o....
./configure --with-odbc=/usr/lib/odbc
sudo make
sudo make install
[.. Install git and clone repo here.. ]
git clone git#github.com:processone/ejabberd.git
cd ejabberd
./configure --enable-odbc --enable-mysql
sudo make
sudo make install
can someone help me on to write my yaws webserver configuration file in the Linux terminal. when i follow the yaws tutorials i get errors. thanks a lot.
This is how I installed Yaws 1.89 on Ubuntu Server 10.10.
1. Update your Ubuntu system
sudo apt-get update
sudo apt-get upgrade
2. Install the tools you need to compile
sudo apt-get install gcc
sudo apt-get install libpam0g-dev
3. Download, compile and install Yaws 1.89
wget http://yaws.hyber.org/download/yaws-1.89.tar.gz
tar xfz yaws-1.89.tar.gz
cd yaws
./configure && make
sudo make install