I did a simple install of APC (no special configurations) and didn't integrate with code at all (letting it go default and making sure things work). I was super impressed to see my New Relic times drop from 300ms to 50ms right after I enabled it! But then I noticed that actually, the server is crashing immediately. Here's the problem:
After I restart Apache, the first request works. Following the first request, I get a slew of errors in my error logs.
Some of these errors are:
Call to a member function getFieldValue() on a non-object in Zend/Http/PhpEnvironment/Request.php (zf2 lib)
Undefined Property:
Zend\\Http\\Headers::$h\x9b\xecv\xb9\x7f in Zend/Http/Headers.php
Is there some magic I'm missing? These seem like errors out of my control.
It is recommended by the ZF community to use opcache instead of APC cache. This was enabled with the default installation requirements and everything worked.
Related
I'm out of my wits. I'm trying to set up remote debugging of lua code in dockerized openresty. I use PHPStorm with EmmyLua extension, and the mobdebug library on the Lua end. I have been reading and hearing reports of this working for people, but for me stopping on a breakpoint (or immediately after mobdebug.start()) works about 15% of the time (evidence that I am not completely misconfiguring the thing), including exactly 0% of those places in my code that I actually want to debug.
I will not be debugging this issue. I intend to work around it by using an exact setup that is known to work, so I need someone for whom it does work to tell me what their setup is:
OS version
openresty version
mobdebug version
any custom patches or hacks you might have applied to get the debugging working
luasocket version (probably relevant)
PHPStorm version
EmmyLua version
docker and docker-compose version, if applicable
whatever you may suspect to be relevant
I am willing to completely raze my development environment and rebuild it exactly to the working spec, just to have working Lua debugging.
EDIT: for those interested, here are my detailed symptoms:
I can't stop at actual breakpoints, ever (i.e. after I initially stop after mobdebug.start() and then "Resume program" and a line with a breakpoint is hit, but it doesn't stop there)
I can stop after mobdebug.start() in code executed from init_by_lua_block, i.e. once per server start / config reload
I can't stop after mobdebug.start() in any code executed during handling a request, i.e. ssl_certificate_by_lua_block, rewrite_by_lua_block etc. This is probably understandable because coroutines are involved
All my attempts at enabling coroutine debugging in request handling code either error out or have no effect:
mobdebug.coro() in init_worker_by_lua_block() errors out with "API disabled in current context" somewhere in mobdebug.lua
mobdebug.on() in the function I want to debug either has no effect, or errors out with "attempt to yield across C-call boundary"; I haven't discerned the pattern yet.
stopping on a breakpoint (or immediately after mobdebug.start()) works about 15% of the time
Stopping after mobdebug.start() should work under all circumstances, except when there is a connection already established to the same debugger controller, so the fact that it doesn't usually points to the system that tries to establish multiple debugging sessions to the same controller/IDE (or no connection can be established at all).
Similarly, there are several reasons why breakpoints may not be working, but if they work in a file as part of a specific setup, then I'd expect them to always work in that case. Some of the reasons why breakpoints may not be working are listed in the documentation: https://studio.zerobrane.com/doc-faq#why-breakpoints-are-not-triggered.
mobdebug provides a command line-based controller, so for troubleshooting purposes it may be easier to use that instead of a more complex setup.
I am using homestead as my development environment, I turned on the hhvm option for the site
sites:
- map: homestead.app
to: /home/vagrant/Code/wheremyprojectis
hhvm: true
I found that when there is an exception, everything is fine, but If I forgot to use namespace, got syntax error in the blade templates, I got nothing, blank page. I go check the logs and still nothing, the debug option is true. It's quite frustrating until I turned off the hhvm option.
I know it is not a big deal, but I still want to know is there any way to fix this?
I experienced the same problem. I searched around and found that it seems to be intentional:
https://github.com/facebook/hhvm/issues/4818
https://github.com/facebook/hhvm/issues/2571
Now you can poke through the github issues mentioned above, as well as these stackoverflow questions:
Display fatal/notice errors in browser
hhvm-fastcgi + nginx how to make it display fatal errors in the browser
laravel 5 show blank page on server error (and no laravel log), running with hhvm and nginx
For the time being, it ultimately boils down to writing your own handler, which isn't too bad. You can also tail the errors at /var/log/hhvm/error.log. Any errors that you intentionally want going to the browser you could of course handle using Laravel's error handling and logging.
UPDATE:
I reported this issue(and a fix) to the Laravel github here:
https://github.com/laravel/framework/issues/8744
Please see my post on the Grails user mailing list. Essentially, I get the error "Cannot forward after response has been committed" with Grails 2.x after every few requests. This happens for all types of URLs, controllers, GSPs, CSS files, JS files and even image files. I have tried Grails 2.0.0 and Grails 2.0.1 with Tomcat 6.0.35 and Tomcat 7.0.25 on Windows XP 32-bit, Windows 7 32-bit and Centos 64-bit. The error comes up on all these combinations.
As I have mentioned in my post, there are no response.redirect or response.forward statements in our code. This is causing severe problem on our production application so need help in determining what else can be looked at to get to the bottom of the problem.
This has been solved. In one of the controllers in the application, response output stream was being directly written to but not closed explicitly after the operation was over. It seems Tomcat and Jetty recycle response objects. When a response object that did not have their output stream closed earlier was recycled for a future request and redirect was performed on it, the redirect would fail.
The code has been changed and the error has disappeared now. The lesson learned is that any time such an error occurs, scan the entire code base for direct access to response output stream and close output stream responsibly before existing controller methods.
You should create a new grails application and move the controllers, domains and etc yourself rather than grails update.
When you do that also make sure you look into the configuration files of grails.
Also take a look at what plugins you have.
Also, when moving the files, try out the application once in a while when it is possible, and perhaps you can detect when the error arises. Start out by trying it in your most basic controller and see if the error is there then as well.
Good luck.
Quite not sure why I see this error.
I navigate to my Login View like so http://test.staging.com/mywebsite/Login
My Login view was just redone using MVC but I have seen this same error message going to an aspx page as well...
If I use http I get the error message The specified request cannot be executed from current Application Pool.
If I use https://test.staging.com/mywebsite/Login, I'm good.
If I don't specify a protocol, test.staging.com/mywebsite/Login, I get the error as well
Is there an error happening under the covers and my custom error page can't be shown like discussed here?
What are some other causes of this error?
That usually means your custom errors are configured to run as a different AppPool.
You can read more at MSDN. (See section "Using Custom Errors from Another Application Pool").
There are two ways to correct this behavior. The first is possibly not one that you are interested in because it would require you to change your current architecture and run both sites in the same application pool (such as share the same worker process memory space). To do this, simply move the /errors virtual directory to run in the same application pool as the site for which it serves the custom error.
The second way is to make use of a registry key provided by IIS 6.0. This registry key makes sure IIS 6.0 does not check the metadata during the execution of the custom error and therefore allowing this to work.
See the article for information on the registry key fix.
It may also mean that you are using something along the lines of Server.Transfer to a page that is in a different AppPool.
It could be because you're using different versions of ASP.NET for one or many apps in the pool.
Make sure all apps in the pool use the same version of ASP (e.g. ASP 2.0.50727)
If you just added a new app, try changing the app momentarily to a different version of ASP, then back to same version. I experienced an issue where the displayed version was correct, but under the hood, a different version was used!
Check your event log, under Application, to get more details about the error.
The message would be caused by your page server-side redirecting to a page served by another application pool. Such as for example, in your link, the error page.
I know this is an old thread, but I stumbled upon it and found a different solution. Here's what worked for me: Make sure your application handles .asmx files correctly
From IIS:
Right Click on your project > Properties > Configuration
If necessary, add the .asmx file extension that maps to the aspnet_isapi.dll
Limit to: "GET,HEAD,POST,DEBUG" and restart.
Because I can't comment on vcsjones's answer, I'll add it down here. The DWORD value IgnoreAppPoolForCustomErrors needs to be set under HKLM\SYSTEM\CurrentControlSet\Services\W3SVC\ Parameters vs HKLM\SYSTEM\CurrentControlSet\Services\W3SVC referenced in that technet article. Set it to 1 and do an iisreset and you're good to go.
Source Blog Post
In my particular case, I received this error while trying to serve a content (non ASP.NET) website while it was an Application. Right-Clicking the virtual folder and removing the application fixed it for me.
In my case the application used the application pool that didn't exist. I have no idea how it's happened.
I have a windows service that is failing to start, giving an error "Error 1053: The service did not respond to the start or control request in a timely fashion".
Running the service in my debugger works fine, and if I double click on the the service .exe on the remote machine a console window pops up and continues to run without problem - I can even see log messages showing me that the program is processing everything the way it should be.
The service had been running fine previously, though this is my first time, personally, trying to deploy it with the most recent changes made to the program. I've evaluated those changes and cant figure out how they might cause this problem, particuarly since everything runs fine when not started as a service.
The StartRoutine() method of the service impelmentation is empty, so should be returning in a "timely fashion".
I've checked the event logs on the computer, and it doesn't give any additional information other than it didn't hear back from the service in the 30 second requisite time frame.
Since it works on my machine, and as a double-clicked executable, how would I go about figuring out why it fails as a service?
Oh, and it's .NET 2.0, so it shouldn't be affected by the 1.1 framework bug that exhibited this symptom (http://support.microsoft.com/kb/839174)
The box is a windows server 2003 R2 machine running SP2.
This is a misleading error. It's probably an unhandled exception.
Empty your OnStart() handler then try this in your constructor...
public MainService()
{
InitializeComponent();
try
{
// All your initialization code goes here.
// For instance, my exception was caused by the lack of registry permissions
;
}
catch (Exception ex)
{
EventLog.WriteEntry("Application", ex.ToString(), EventLogEntryType.Error);
}
}
Now check the EventLog on your system for your Application Error.
Could be a number of things and it might help to get a stack trace on the machine exhibiting the problem. There are a number of ways to do this but the point is that you have to see where this is failing in the code.
You can do this with remote debugging, but a simple thing might be to just log to the event logger, or file log if you have that. Literally, putting "WriteLine("At class::function()") throughout portions of the code to see if you've made it there.
This will at least get you looking in the right direction (which ultimately is the code).
Update:
See Microsoft's How to Debug Windows Services article for details in troubleshooting startup problems using WinDbg.
This related question details nice ways to debug services that are written in .NET.
I agree with Scott, the easiest way to find out what's happening is to put some traces in the start-up code (maybe it doesn't even come to your start-up code).
If this doesn't help, you can post your code here so others can take a look.
perhaps lacking some dependence, try this :
- deregister your service
- register again
If fail at register means that lack an module.
If the StartRoutine is empty, you are probably starting it somewhere else.
IIRC you need to fire off a worker thread, and then return from StartRoutine.
One of the problems which may lead to this error is if windows service which needs to be deployed consists of some error i.e it may be simple authorization error or anything as in my case I have referenced some folders and files for logging which were not existing, but when provided the right path of those file and folders it solved my problem.
I ran through every post on this particular subject and none of the responses solved the problem, so I'm adding this response in case this helps someone else. Admittedly this only applies to a new service, not this specific case.
I was writing a File listening service. As a console app, it worked perfectly. When I ran it as a service, I got the same error as above. What I didn't know (and many of the MSDN articles about services conveniently leave out) is that you need to have your class executed from within ServiceBase.Run( YourClassName());. Otherwise, your app executes and immediately terminates and because it terminated, you get the error above even if no error or exception occurred. Here is a link to an article about this. It actually discusses setting up your app for dual use - Console app and service: Create a combo command line / Windows service app
I had that issue and the source of my problem was config file. I edited it in notepad and notepad added one special character which cause service not to run properly because config file was ruined. I saw that special character in notepadd++ and after delete it, service started to run successfully as previous did.
In my case, the correct .NET framework was not installed on the server that I was installing the Windows service on.
One other reason is If you copy the DLL in 'debug' mode to installation folder this issue will come.What you need to do is Run the project in 'Release' mode copy the DLL or directly form Release folder rather than Debug folder,,and copy that DLL in to installation folder,it will work.You can see the reduction in size of DLL ,it will not contain any debug symbols and like that