for instance, I tried the official example with queries:
https://services.odata.org/TripPinRESTierService/(S(q1skedyvlv22yjp5fcce2gg2))/People?$filter=UserName%20eq%20%27russellwhyte%27%20or%20UserName%20eq%20%27scottketchum%27%20and%20UserName%20eq%20%27ronaldmundy%27
and
https://services.odata.org/TripPinRESTierService/(S(q1skedyvlv22yjp5fcce2gg2))/People?$filter=UserName%20eq%20%27russellwhyte%27%20and%20UserName%20eq%20%27scottketchum%27%20or%20UserName%20eq%20%27ronaldmundy%27
It turns out that it is not from left to right, the AND operator was dealt in prior to OR operator.
I wonder if that is the rule.
I searched the document:
http://docs.oasis-open.org/odata/odata/v4.0/errata03/os/complete/part2-url-conventions/odata-v4.0-errata03-os-part2-url-conventions-complete.html#_Toc453752358
it refers to odata-abnf.
But in abnf I only find
"andExpr = RWS "and" RWS boolCommonExpr"
, which I fail to understand...
AND in logic has higher precedence than OR, the same way that multiplication has higher precedence in math than addition. Expressions aren't evaluated left-to-right, either in math or logic. They're evaluated according to specific precedence rules.
Most (if not all) programming languages follow the logical precedence rules.
I'm following along with Bob Nystrom's great book "Crafting Interpreters".
Please let me know if this question is too specific for this site - I've been trying for hours but couldn't figure this out on my own :)
In chapter Compiling Expressions, in function unary(), the function parsePrecedence(Precedence) is called with PREC_UNARY instead of PREC_UNARY + 1.
The book explains this is in order to enable "nesting" of unary operators. E.g.: --1.
However, in parsePrecedence(Precedence) no precedence level is checked before parsing prefix operators - it is checked only before infix ones. And unary is a prefix parser.
So passing PREC_UNARY or PREC_UNARY + 1 to parsePrecedence(Precedence) doesn't seem to make a difference. What am I missing?
The simple answer is that you are right: with this particular grammar, there is no difference because no binary (or postfix) operator has precedence PREC_UNARY, and the test that will be used is ≤.
All the same, the conventional answer is to use PREC_UNARY because unary prefix operators are (necessarily) right associative. This convention comes from the case of binary operators, where you need to use the operator's precedence plus one for left associative operators (the normal case) and the operator's precedence itself for right-associative operators (exponentiation and assignment, for example). (Assignment is actually somewhat more complicated, but I personally think the solution proposed by Bob Nystrom is more complicated than would have been necessary.)
Another conventional answer derives from the possibility of using a bottom-up operator precedence parser (Dijkstra's "shunting yard") instead of the top-down Pratt parser. Fully exploring bottom-up parsing goes well beyond the scope of this question; suffice it to say that the same principle applies with respect to associativity.
In the PowerShell Language Specification, the grammar has a term called "Primary Expression".
primary-expression:
value
member-access
element-access
invocation-expression
post-increment-expression
post-decrement-expression
Semantically, what is a primary expression intended to describe?
As I understand it there are two parts to this:
Formal grammars break up things like expressions so operator precedence is implicit.
Eg. if the grammar had
expression:
value
expression * expression
expression + expression
…
There would need to be a separate mechanism to define * as having higher precedence than +. This
becomes significant when using tools to directly transform the grammar into a tokeniser/parser.1
There are so many different specific rules (consider the number of operators in PowerShell) that using fewer rules would be harder to understand because each rule would be so long.
1 I suspect this is not the case with PowerShell because it is highly context sensitive (express vs command mode, and then consider calling non-inbuilt executables). But such grammars across languages tend to have a lot in common, so style can also be carried over (don't re-invent the wheel).
My understaning of it is that an expression is an arrangement of commands/arguments and/or operators/operands that, taken together will execute and effect an action or produce a result (even if it's $null) than can be assigned to a variable or send down the pipeline. The term "primary expression" is used to differentiate the whole expression from any sub-expressions $() that may be contained within it.
My very limited experience says that primary refers to expressions (or sub-expressions) that can't be parsed in more than one way, regardless of precedence or associativity. They have enough syntactic anchors that they are really non-negotiable--ID '(' ID ')' for example, can only match that. The parens make it guaranteed, and there are no operators to allow for any decision on precedence.
In matching an expression tree, it's common to have a set of these sub-expressions under a "primary_expr" rule. Any sub-expressions can be matched any way you like because they're all absolutely determined by syntax. Everything after that will have to be ordered carefully in the grammar to guarantee correct precedence and associativity.
There's some support for this interpretation here.
think $( lots of statements ) would be like a complex expression
and in powershell most things can be an expression like
$a = if ($y) { 1 } else { 2}
so primary expression is likely the lowest common denominator of classic expressions
a single thing that returns a value
whether an explicit value, calling something.. getting a variable, or a property from a variable $x.y or the result of increment operation $z++
but even a simple math "expression" wouldn't match this 4 +2 + (3 / 4 ) , that would be more of a complex expression.
So I was thinking of the WHY behind it, and at first it was mentioned that it could be to help determine command/expression mode, but with investigation that wasn't it. Then i thought maybe it was what could be passed in command mode as an argument explicitly, but thats not it, because if you pass $x++ as a parameter to a cmdlet you get a string.
I think its probably just the lowest common denominator of expressions, a building block, so the next question is what other expressions does the grammar contain, and where is this one used?
This page says "Prefix operators are usually right-associative, and postfix operators left-associative" (emphasis mine).
Are there real examples of left-associative prefix operators, or right-associative postfix operators? If not, what would a hypothetical one look like, and how would it be parsed?
It's not particularly easy to make the concepts of "left-associative" and "right-associative" precise, since they don't directly correspond to any clear grammatical feature. Still, I'll try.
Despite the lack of math layout, I tried to insert an explanation of precedence relations here, and it's the best I can do, so I won't repeat it. The basic idea is that given an operator grammar (i.e., a grammar in which no production has two non-terminals without an intervening terminal), it is possible to define precedence relations ⋖, ≐, and ⋗ between grammar symbols, and then this relation can be extended to terminals.
Put simply, if a and b are two terminals, a ⋖ b holds if there is some production in which a is followed by a non-terminal which has a derivation (possibly not immediate) in which the first terminal is b. a ⋗ b holds if there is some production in which b follows a non-terminal which has a derivation in which the last terminal is a. And a ≐ b holds if there is some production in which a and b are either consecutive or are separated by a single non-terminal. The use of symbols which look like arithmetic comparisons is unfortunate, because none of the usual arithmetic laws apply. It is not necessary (in fact, it is rare) for a ≐ a to be true; a ≐ b does not imply b ≐ a and it may be the case that both (or neither) of a ⋖ b and a ⋗ b are true.
An operator grammar is an operator precedence grammar iff given any two terminals a and b, at most one of a ⋖ b, a ≐ b and a ⋗ b hold.
If a grammar is an operator-precedence grammar, it may be possible to find an assignment of integers to terminals which make the precedence relationships more or less correspond to integer comparisons. Precise correspondence is rarely possible, because of the rarity of a ≐ a. However, it is often possible to find two functions, f(t) and g(t) such that a ⋖ b is true if f(a) < g(b) and a ⋗ b is true if f(a) > g(b). (We don't worry about only if, because it may be the case that no relation holds between a and b, and often a ≐ b is handled with a different mechanism: indeed, it means something radically different.)
%left and %right (the yacc/bison/lemon/... declarations) construct functions f and g. They way they do it is pretty simple. If OP (an operator) is "left-associative", that means that expr1 OP expr2 OP expr3 must be parsed as <expr1 OP expr2> OP expr3, in which case OP ⋗ OP (which you can see from the derivation). Similarly, if ROP were "right-associative", then expr1 ROP expr2 ROP expr3 must be parsed as expr1 ROP <expr2 ROP expr3>, in which case ROP ⋖ ROP.
Since f and g are separate functions, this is fine: a left-associative operator will have f(OP) > g(OP) while a right-associative operator will have f(ROP) < g(ROP). This can easily be implemented by using two consecutive integers for each precedence level and assigning them to f and g in turn if the operator is right-associative, and to g and f in turn if it's left-associative. (This procedure will guarantee that f(T) is never equal to g(T). In the usual expression grammar, the only ≐ relationships are between open and close bracket-type-symbols, and these are not usually ambiguous, so in a yacc-derivative grammar it's not necessary to assign them precedence values at all. In a Floyd parser, they would be marked as ≐.)
Now, what about prefix and postfix operators? Prefix operators are always found in a production of the form [1]:
non-terminal-1: PREFIX non-terminal-2;
There is no non-terminal preceding PREFIX so it is not possible for anything to be ⋗ PREFIX (because the definition of a ⋗ b requires that there be a non-terminal preceding b). So if PREFIX is associative at all, it must be right-associative. Similarly, postfix operators correspond to:
non-terminal-3: non-terminal-4 POSTFIX;
and thus POSTFIX, if it is associative at all, must be left-associative.
Operators may be either semantically or syntactically non-associative (in the sense that applying the operator to the result of an application of the same operator is undefined or ill-formed). For example, in C++, ++ ++ a is semantically incorrect (unless operator++() has been redefined for a in some way), but it is accepted by the grammar (in case operator++() has been redefined). On the other hand, new new T is not syntactically correct. So new is syntactically non-associative.
[1] In Floyd grammars, all non-terminals are coalesced into a single non-terminal type, usually expression. However, the definition of precedence-relations doesn't require this, so I've used different place-holders for the different non-terminal types.
There could be in principle. Consider for example the prefix unary plus and minus operators: suppose + is the identity operation and - negates a numeric value.
They are "usually" right-associative, meaning that +-1 is equivalent to +(-1), the result is minus one.
Suppose they were left-associative, then the expression +-1 would be equivalent to (+-)1.
The language would therefore have to give a meaning to the sub-expression +-. Languages "usually" don't need this to have a meaning and don't give it one, but you can probably imagine a functional language in which the result of applying the identity operator to the negation operator is an operator/function that has exactly the same effect as the negation operator. Then the result of the full expression would again be -1 for this example.
Indeed, if the result of juxtaposing functions/operators is defined to be a function/operator with the same effect as applying both in right-to-left order, then it always makes no difference to the result of the expression which way you associate them. Those are just two different ways of defining that (f g)(x) == f(g(x)). If your language defines +- to mean something other than -, though, then the direction of associativity would matter (and I suspect the language would be very difficult to read for someone used to the "usual" languages...)
On the other hand, if the language doesn't allow juxtaposing operators/functions then prefix operators must be right-associative to allow the expression +-1. Disallowing juxtaposition is another way of saying that (+-) has no meaning.
I'm not aware of such a thing in a real language (e.g., one that's been used by at least a dozen people). I suspect the "usually" was merely because proving a negative is next to impossible, so it's easier to avoid arguments over trivia by not making an absolute statement.
As to how you'd theoretically do such a thing, there seem to be two possibilities. Given two prefix operators # and # that you were going to treat as left associative, you could parse ##a as equivalent to #(#(a)). At least to me, this seems like a truly dreadful idea--theoretically possible, but a language nobody should wish on even their worst enemy.
The other possibility is that ##a would be parsed as (##)a. In this case, we'd basically compose # and # into a single operator, which would then be applied to a.
In most typical languages, this probably wouldn't be terribly interesting (would have essentially the same meaning as if they were right associative). On the other hand, I can imagine a language oriented to multi-threaded programming that decreed that application of a single operator is always atomic--and when you compose two operators into a single one with the left-associative parse, the resulting fused operator is still a single, atomic operation, whereas just applying them successively wouldn't (necessarily) be.
Honestly, even that's kind of a stretch, but I can at least imagine it as a possibility.
I hate to shoot down a question that I myself asked, but having looked at the two other answers, would it be wrong to suggest that I've inadvertently asked a subjective question, and that in fact that the interpretation of left-associative prefixes and right-associative postfixes is simply undefined?
Remembering that even notation as pervasive as expressions is built upon a handful of conventions, if there's an edge case that the conventions never took into account, then maybe, until some standards committee decides on a definition, it's better to simply pretend it doesn't exist.
I do not remember any left-associated prefix operators or right-associated postfix ones. But I can imagine that both can easily exist. They are not common because the natural way of how people are looking to operators is: the one which is closer to the body - is applying first.
Easy example from C#/C++ languages:
~-3 is equal 2, but
-~3 is equal 4
This is because those prefix operators are right associative, for ~-3 it means that at first - operator applied and then ~ operator applied to the result of previous. It will lead to value of the whole expression will be equal to 2
Hypothetically you can imagine that if those operators are left-associative, than for ~-3 at first left-most operator ~ is applied, and after that - to the result of previous. It will lead to value of the whole expression will be equal to 4
[EDIT] Answering to Steve Jessop:
Steve said that: the meaning of "left-associativity" is that +-1 is equivalent to (+-)1
I do not agree with this, and think it is totally wrong. To better understand left-associativity consider the following example:
Suppose I have hypothetical programming language with left-associative prefix operators:
# - multiplies operand by 3
# - adds 7 to operand
Than following construction ##5 in my language will be equal to (5*3)+7 == 22
If my language was right-associative (as most usual languages) than I will have (5+7)*3 == 36
Please let me know if you have any questions.
Hypothetical example. A language has prefix operator # and postfix operator # with the same precedence. An expression #x# would be equal to (#x)# if both operators are left-associative and to #(x#) if both operators are right-associative.
I've been mulling over creating a language that would be extremely well suited to creation of DSLs, by allowing definitions of functions that are infix, postfix, prefix, or even consist of multiple words. For example, you could define an infix multiplication operator as follows (where multiply(X,Y) is already defined):
a * b => multiply(a,b)
Or a postfix "squared" operator:
a squared => a * a
Or a C or Java-style ternary operator, which involves two keywords interspersed with variables:
a ? b : c => if a==true then b else c
Clearly there is plenty of scope for ambiguities in such a language, but if it is statically typed (with type inference), then most ambiguities could be eliminated, and those that remain could be considered a syntax error (to be corrected by adding brackets where appropriate).
Is there some reason I'm not seeing that would make this extremely difficult, impossible, or just a plain bad idea?
Edit: A number of people have pointed me to languages that may do this or something like this, but I'm actually interested in pointers to how I could implement my own parser for it, or problems I might encounter if doing so.
This is not too hard to do. You'll want to assign each operator a fixity (infix, prefix, or postfix) and a precedence. Make the precedence a real number; you'll thank me later. Operators of higher precedence bind more tightly than operators of lower precedence; at equal levels of precedence, you can require disambiguation with parentheses, but you'll probably prefer to permit some operators to be associative so you can write
x + y + z
without parentheses. Once you have a fixity, a precedence, and an associativity for each operator, you'll want to write an operator-precedence parser. This kind of parser is fairly simply to write; it scans tokens from left to right and uses one auxiliary stack. There is an explanation in the dragon book but I have never found it very clear, in part because the dragon book describes a very general case of operator-precedence parsing. But I don't think you'll find it difficult.
Another case you'll want to be careful of is when you have
prefix (e) postfix
where prefix and postfix have the same precedence. This case also requires parentheses for disambiguation.
My paper Unparsing Expressions with Prefix and Postfix Operators has an example parser in the back, and you can download the code, but it's written in ML, so its workings may not be obvious to the amateur. But the whole business of fixity and so on is explained in great detail.
What are you going to do about order of operations?
a * b squared
You might want to check out Scala which has a kind of unique approach to operators and methods.
Haskell has just what you're looking for.