I created a word document in version 2010. The mathematical equations are described by a number and written as follow.
a= b/c Eq.4.5
Now if I use equation number in text to refer towards a= b/c Eq.4.5 with hyperlink then whole
equation is appearing in text (as shown before in mid of sentence).
After reading into several blogs, I redefine number with 'insert bookmark' option by only selecting number 'Eq.4.5'.
Now if I use this bookmark in text to refer towards Eq.4.5 with hyperlink then a gap is
appearing in text (as shown before in mid of sentence).
Please can someone guide me how to remove this gap from text? as manually I can remove it but in print or update of document it appears again and again. If I switch on 'Show/Hide' option, it look like with small arrows as follows.
--> --> --> --> Eq.4.5
It appears the bookmark counts the 'tab's before the number too. (As that is what the small arrows indicate.)
Try remaking the bookmark and making sure you only have the number selected (by for instance using shift + right arrow key)
This can be done by using a table and a caption. The table is needed to separate the equation from the caption.
Make a table with invisible lines that is 3 columns wide and 1 row.
Edit the properties of the table so that the total table width is 100% width, and the columns are each 10%, 80%, and 10% width.
Set the Valign to the cells to be middle.
Add the equation to the center cell of the table.
Click on the right cell of the table and add a caption. Since the equation is in a separate table cell, the equation will not be considered part of the caption. If the caption is added to the table itself instead of appearing in the cell, then just highlight the caption and drag it into the cell.
Center the equation in its cell and it will be centered in the page.
Right-align the equation number and it will be right-aligned to the page
Related
When I do "resize column → fit to data" then this action doesn't align the words as required. The words break into parts. For example, a cell has this content : "cash back maximum". Each word is in an individual line within that cell. So there are 3 lines. Something like this :
cash
back
maximum
But after I do "resize column - fit to data" the cell content becomes "cash back maximu m". The last letter "m" breaks apart and moves down & now there are 4 lines. Something like this :
cash
back
maximu
m
How do I avoid this? I want words to remain entact. "Maximum" shouldn't break into "maximu" & "m". Ofcourse I can manually adjust column width to make the word entact / whole again but I wish there was a quick automatic command or formula or shortcut to do this.
This should be what it currently looks like for you.
You can drag the cell "border" to increase the width, to allow all text to fit.
You can double click a "border" to get it to fit to the longest text.
I'm trying to count the number of empty cells that exist in a column between each non-empty cell but haven't been able to work out how.
Using this, I'm also trying to find the largest "empty distances" and locate the cell in the center of these distances.
The sheet I'm working with lists a set of marker colors and denotes the ones that are owned out of the full set of colors. I'm trying to find the largest ranges of missing colors and then find the colors in the middle of those ranges in order to find a handful of markers that would best help to fill out the spectrum.
Columns 1-6 are information- Column 7 marks whether the color is owned:
I may have an answer that helps you.
I could only get it to work using a helper column, but someone may know how to eliminate that requirement.
The helper column creates an array, basically listing the row numbers of the rows that have an "x" in your column B.
The main formula then measures the gap between each of these listed row numbers. It also checks the gap before the first "x", and after the last "x". Note that I have the data starting on row 2, which complicates the formula, but makes the sample sheet clearer - this can easily be changed to row 1 if you prefer.
={F2-1;
query(ArrayFormula(if(isnumber(F3:F),F3:F-F2:F-1,"")),
"select Col1 where Col1 > 0",0);
counta(A2:A)-indirect("F"&COUNTA(F$2:F))}
See a sample sheet here:
https://docs.google.com/spreadsheets/d/19QUFGRqTT6BqOsBrEBpTIxQCeNdRa5mzXhxQpCZ8sV4/edit?usp=sharing
Then I used a second formula to calculate the max gap between "x"s, (or before the first or after the last x).
Note that calculating the midpoint of the gaps, and doing a lookup of the corresponding mid-point colour, is something that can be added to this answer, if you share a sample copy of your sheet and share it for editing.
Let me know if this helps. I'll add more explanation to describe what the formula is doing tomorrow.
And I'll provide a second tab with the formulas adjusted to work with data beginning on row 1.
You can also get the lengths of the gaps using Frequency:
=ArrayFormula(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),if((B1:B20="X")*(A1:A20<>""),row(B1:B20))))
but finding the centres of the gaps and allowing for equal-sized gaps is more difficult.
This should find the position of the "X" at the end of the longest gap:
=ArrayFormula(
sum(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))*(sequence(countif(B1:B20,"X")+1,1)<=
match(max(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))),frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20))),0)))+
countif(sequence(countif(B1:B20,"X")+1,1),"<="&
match(max(frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20)))),frequency(if((B1:B20<>"X")*(A1:A20<>""),row(B1:B20)),
if((B1:B20="X")*(A1:A20<>""),row(B1:B20))),0))
)
and then it should just be a case of working backwards from there to the centre of the longest gap. However the formula needs further refinement to deal with the cases
(1) Where the longest gap is after the last "X"
(2) Where there is a tie for the longest gap
(3) Where there is a need to list the longest, second longest, third longest gap etc.
I have a sheet with a line chart, now I'm trying to do something maybe very simple: I would like to add to this chart a vertical line using a value in a cell.
So I have this line chart
And a cell with the date 2016/01/01, I would like to have a vertical line through all the chart on the cell date
I can't figure out how to do it...
This is a copy of that sheet: https://docs.google.com/spreadsheets/d/1oeiwmeDT8pUVqBQvoE_cqk7mZxxvD5moZr41Vp4IN2I/edit?usp=sharing
I would like to show a vertical line using the "Purchase date"
I had the same problem and created a solution to overcome limitations of Google Sheets charts.
The main idea is to create an additional line in the chart, with only two points, both with the desired date. The value of the first point is 0 and the last has the maximum value of the Y axis. This way, the line always covers the entire height of the chart.
Screenshot of the Chart
Note that it is necessary to add two new values in the X axis (highlighted in blue on the sheet). Don't worry with the fact they are repeated. Google Sheets handles it correctly.
These values can be placed at the beginning of the lists. This way, it is possible to add new values at the end of them.
This solution can be viewed in: "[GoogleSheets] Dinamic Vertical Line in a Chart"
To change position of red line, just select a different value in "Purchase date" (yellow cell).
I made a merge of my first solution with the one suggested by dimo414 and created a new solution with two variations.
In the previous version of the spreadsheet, there were only two points to draw the vertical line.
In the new version, a third point were inserted to show intersection between the line and the real curve. A new column was also created, containing only a label for the new point.
The result is:
Theses changes can be seen in green background in sheets 'Dashboard_v2' and 'Dashboard_v3' of the SpreadSheet.
To determine coordinates of the new point, two approaches were used:
Search Purchase Date directly in the dataset (see sheet 'Dashboard_v2')
If the goal is to highlight only points of intersection that belong to the original dataset, it is just necessary to VLOOKUP() the date in the dataset.
Interpolate the two points immediately smaller and larger than the purchase date (see sheet 'Dashboard_v3')
Given the points [x1,y1], [x2,y2] and a value of x (where x1 <= x <= x2), its possible to find an interpolation point [x,y] with the following formula:
y=(y2-y1)*(x-x1)/(x2-x1)+y1
Although this formula is easy to implement, find the correct points to interpolate is more challenging and requires a bit of creativity.
At first, I thought of using a JS script to make things easier, but decided to use only builtin functions.
By the way, different approaches to find [x1,y1] and [x2,y2] are welcome.
To make things easier to understand, each point coordinate is determined in a different cell (see L2:M5) and the point of intersection is in L6:M7.
Of course, its possible to join all of them in just one cell, but I thought it would be harder to understand.
To close, one more detail: According to above definition, interpolation formula is valid only if (x1 <= x <= x2). Thus, both cells C2 and M6 have protections to limit the value of 'x'.
One way is to add a label to your x-axis.
For example, this is a chart that plots weight against date, with a label "Cheat Day" on 2021-07-21
For the data:
Date
Label
Weight (kg)
Weight Goal (kg)
2021-07-19
83.85
75
2021-07-20
84.55
75
2021-07-21
Cheat Day
83.8
75
2021-07-22
84.95
75
2021-07-23
83.75
75
Go to Edit the chart > Setup > Under X-axis > Click on ••• next to your "Date" column > Add labels > Select the column "Label" as your label.
Your Chart Editor > Setup should look like this:
you can have it like this, unfortunately not programmatically. the only way is to insert a line via Drawing and position it manually where needed.
spreadsheet demo
As best I can tell there isn't a way to add a vertical marker line to a chart in Google Sheets. One option that may be "good enough" in many cases is to "Add notes to a data point" and then use "Format data point" to make the point more visible. Here's an example, from your spreadsheet:
Unfortunately one limitation with this approach is you can only label a data point in the data set the chart is displaying. In your case the date you wanted to mark with a line isn't in the data set, so this won't work directly. You might be able to introduce a separate data series consisting of just that date and then add a note to that data point, but I haven't fiddled with it enough to make it work.
I am making a spreadsheet that shows values based on another sheet, where it's supposed to only show values greater than 0. Whenever a cell is 0, it needs to hide the cell itself and the cell on its left. in this case, the value 0 is based on a simple equation: =B4-Blad1!C4.
To fully hide the row, you can use the filter function:
Draw a selection rectangle on the data in which rows should disappear
Click on the Funnel icon to start the filter function
In the column header, click on the new icon, 3 horizontal green lines in a triangle shape.
Make sure checkboxes remain before the non-zero values
For animations, follow the example here:
https://yagisanatode.com/2018/05/26/how-to-hide-a-row-based-on-a-cell-value-in-google-sheets-with-filter-or-google-apps-script/
I have table with 5 cells ,
I want to let all cells text in the same adjust
my first cell text from four litters and the second cell text is word from 7 litters so the two cells are not in the same adjust
I attached picture to show you my problem
any help please.
Array columns in a tabular environment must be associated with an alignment qualifier. In your example, you probably used c (center), but you should have used l to have the text in the cells left aligned or r for a right alignment.
But this is very basic LaTeX use and you should absolutely read a tutorial on LaTeX tables.
Note that there are many useful packages that extend the tabular functionality and allows to have centered paragraph, to control their vertical alignment, to align digital numbers and so on. Look at this thread in tex.stackexchange.com to have a good overview on existing packages for table formatting.