So I asked a question about my code relating to didEnterRegion but perhaps I was being too specific, therefore could I ask someone to clarify the order of method calls in more generic terms for region monitoring, specifically when the app is in the background.
My understanding is:
App registers region calling startMonitoringForRegion:
User taps home button or locks device, app goes into the background.
The devices location is monitored at the OS level, separate from the app, the app is never launched by the OS to confirm the users current location.
When the user crosses the boundary into the region, the OS looks for which app originally registered the region and launches that app.
The app is launched in the background, (didFinishLaunchingWithOptions: is not called however), the CLLocationManager delegate is setup and it’s didEnterRegion delegate method is called.
In my case, this sets up a UILocalNotification which is presented immediately (banner displays on home screen if for example another app is in use, or on the lock screen if phone is dormant).
The user actions the notification by swiping in the lock screen or tapping the banner, the app is launched and appWillEnterForeground/appWillBecomeActive is called AND the app delegate didRecieveLocalNotification: method is called if implemented.
This is my understanding, which is probably wrong as my UILocalNotification is never fired if the app is in the background. Could someone clarify which bits are wrong?
After further testing I've come to the conclusion that there's nothing wrong with my code and it's actually appears to be Apples implementation of region monitoring being poor. It seems to be only slightly better than the monitoring of significant location changes, and still relies on changes in wifi networks and cell towers. Even within a major UK city I found didEnterRegion wasn't trigged until you were up to 1000 meters into a mile wide region, if triggered at all. This explains why it works every time when testing though Xcode and forcing the location.
The only work around I've come up with so far is to calculate the distance remaining each time the users location is updated and to manually call the didEnterRegion delegate method when this is less than the regions radius/2. This is supposed to be done automatically by Apples code when you're more than 10m into the boundary, however I found that to be unreliable for the reasons above.
However given you can't get regular updates using the better accuracy of GPS whilst the app is in the background and this is only a problem when the app is in the background, it's not really a solution at all. :o(
Related
Still fighting with iBeacon monitoring for screen-off mode in my iOS app.
In my experiment, when the screen is turned off, the delegate method "locationManager:didRangeBeacons:inRegion:" is still triggered continuously, but, as soon as the screen is off, the signal disappears accordingly(RSSI=0, beacon.accuracy=-1.0), and then, 10 seconds later, there is no beacon found at all.
I found some important information in this post saying that "iOS uses beacons in two different ways: region monitoring and beacon ranging. The latter does NOT work in the background ..., or when the app is terminated.
CLLocationManager will ONLY fire off ONE delegate call when a region is entered. If you start monitoring for a region while inside of that said region, the entry delegate will NOT be called. Your app will have to manually call the CLLocationManager’s requestStateForRegion method. Once you’ve exited the monitored region(s), CLLocationManager will call the didExitRegion approximately 30-45 seconds later."
Now I tried to call the "requestStateForRegion:" method continuously when the screen is off. The result is:
If my iPhone is already in the iBeacon region, the delegate method
"didDetermineState" gives "CLRegionStateInside" continuously;
When I hold my iPhone and walk outside the iBeacon region, or just
shut down the iBeacon's advertising, after 30-45 seconds, the
delegate method "didDetermineState" turns to "CLRegionStateOutside"
and keeps in "outside" state;
When I hold my iPhone and walk inside the iBeacon region, or turn on
the iBeacon's advertising again, the delegate method
"didDetermineState" still gives "outside" continuously and NEVER
TURNS BACK TO "inside".
What I need is, when the screen is off, I can detect as soon as my iOS device enters the iBeacon region. Asking for help...Thanks in advance.
Have you added the NSLocationAlwaysUsageDescription in your info.plist? I can really recommend you to follow this tutorial which goes through all this.
When you start monitoring, there's always an initial call to the didDetermineState delegate. This is how you can figure out if you're already in the beacon region. From then on, you can continue relying on didEnter/didExit (didDetermineState is also called alongside these). The only catch is, if the user turns Bluetooth off and then back on again—you will lose any state transitions that ordinarily would've happened during that time—so it's a good idea to call requestState after you detect Bluetooth is back on, to get caught up on the current state.
All in all, there's no need to call requestState continuously, and you can't ordinarily even do so when the screen is locked—iOS will put your app to sleep, per my answer to your other question. Unless you're using Background Modes to keep the app running in the background, but then you must be able to defend it when you submit your app for review, as Background Modes are reserved for very specific use cases. You should rely on automatic calls to didEnter/didExit/didDetermineState, aided by requestState if Bluetooth is turned off and on.
When I hold my iPhone and walk inside the iBeacon region, or turn on the iBeacon's advertising again, the delegate method "didDetermineState" still gives "outside" continuously and NEVER TURNS BACK TO "inside".
Keep in mind that depending on hardware capabilities of your iOS device (you haven't mentioned which one you're testing with), the "enter" event might take a while to trigger. The guys at Radius did some testing long time ago, and it was up to 15 minutes for iPhone 4S on iOS 7.1. That's b/c iPhone 4S doesn't support offloading BLE scanning to the Bluetooth chip, unlike newer iPhone models. But even on these newer models, there's a limit of how many scans can be offloaded to the chip, which Radius also measured to be 30 (on iOS 8.3 and with 3 different iOS devices).
I am working on an app that records journeys by tracking the GPS. Everything is working fine in background if we start the process from the foreground (by tapping the button "Start Journey").
Now the idea is start record these journeys automatically triggered by a iBeacon. When the iPhone gets inside of a beacon region, the app is detecting this and calls the function LocationManager.StartUpdatingLocation();
PROBLEM:
Using iBeacons from background, we only get 10 seconds ranging and that is the same figure I have got to get location updates from GPS.
All I need is detect I am inside of beacon region, start GPS and keep it running, and only disable the GPS when I am outside of the region.
Unfortunately, you can use CoreLocation geofences in the background, but you can't get fine GPS updates continually. This isn't a Xamarin thing -- it is an iOS restriction.
I wrote the blog post that #RobertN referenced about extending background beacon ranging to 3 minutes. But I don't think this is much help to you because you want to do get GPS updates continually, which Apple simply does not allow.
We actually recently wanted to implement this behavior in one of our apps too, and found that if we start significant location updates (startMonitoringSignificantLocationChanges) in the foreground, then we're able to start regular location updates (startUpdatingLocation) in the background, in our didEnterRegion implementation.
(Naturally, your app needs the "always" authorization to access Location Services, and the "Location updates" Background Mode enabled.)
Our app is still pending review, so whether that's a bug or a feature of Core Location, and whether Apple is okay with that, remains to be seen.
The best explanation to this I seen can extend that 10 seconds to 3 minutes, but that is it... App rejection is an issue with continuous background operation unless your app truly is reviewed as a Navigation app:
A second approach involves tracking the beacon in the background,
noting its estimated distance, and only triggering an action when the
beacon is estimated to be within a specific range. This approach is
problematic on iOS, because CoreLocation generally allows only 10
seconds of ranging time when an app is in the background. If a beacon
is first detected at 50 meters, and a person is approaching the beacon
at one meter per second, the mobile device will still be 40 meters
away when iOS suspends the app and stops it from ranging.
The good news is that it is possible to extend background ranging time
on iOS. If your app is a navigation app, you can specify location
updates in the “Required background modes” in your Info.plist. But
this approach makes it harder to get AppStore approval -- you have to
convince reviewers that your app is providing navigation services to
the user. This probably isn’t true for many apps that simply want to
use beacons to trigger at a specific distance.
Fortunately, you can still extend background ranging time without
requesting special background modes. The time you can get is limited
-- only three minutes. But this clock restarts each time your app is woken up in the background, meaning you can get an extra three minutes
of ranging time each time your app detects a beacon (enters a beacon
region) or stops seeing beacons (exits a beacon region.)
Via: http://developer.radiusnetworks.com/2014/11/13/extending-background-ranging-on-ios.html
I have a client requirement to monitor a region (say MyHome). To alert the user when he leaves MyHome and reaches back to the location. I can handle it pretty easily using the region crossing delegate methods:
locationManager:didEnterRegion:
locationManager:didExitRegion:
My question is, what will be the scenario if my device is off when I am at MyHome location. I leave the location MyHome, move to a different place and switch on my mobile. Will I get the locationManager:didExitRegion: delegate method fired when I launch the app back and thus will be able to notify that I am away from the region. OR will I have to do anything else to get this possible?
First of all monitoring region is not made for such small area to monitor. You may not get actual results. Now, the answer of your question, yes. It is possible. When you will start your device, you will have delegates method to get hit.
I'm making a background tracking GPS app for iOS 7.0+.
I'm having issues when tracking position while in background, it's killed after exactly 5 minutes, even if we are in the middle of a highway, with 1 location per second. It's not killed when constantly in active state.
This seems to occur only on iOS 7.0 version, not on later versions.
I already registered the plist location background activity.
I need maximum accuracy and shortest update time, so I'm not using the significant change method but the basic startUpdatingLocation. This application is used mainly plugged inside a car (no mercy for battery).
I set the location delegate to the app delegate so it's less subject to be deallocated.
Even with all of this done, it's still impossible to take this app alive in background more than 5 minutes.
I'm fighting on iOS which always find a way to terminate my app, even with app state restoration.
So the question is, is there a way to know why my application is killed ?
List of threads that didn't help me or does not respond to my needs, and that I already visited :
How to keep GPS app running in background without pauses
iOS Multi-Tasking Track GPS Location
Periodic iOS background location updates
The system will not tell you why the app was terminated.
I set the location delegate to the app delegate so it's less subject to be deallocated.
The delegate has no effect on whether the location manager is deallocated or not. You must keep a strong reference to the location manager itself.
I built this app which is tracking the users position even when running in background. I use the CLLocationManagers method
startUpdatingLocation
I set the CLLocationManager to
desiredAccuracy=kCLLocationAccuracyNearestTenMeters
distanceFilter=250
Everything works fine in foreground and in background. But when I don't move the device for a longer period (hours) I can see that the location arrow disappears. When I switch back to my app I can see that the arrow comes back immediately and that the app did NOT crash. Is this a "feature" of the LocationManager I don't know? Did the LocationManager went into some kind of "standby"? This should NOT be an issue with the app running not in foreground since I can travel with it for an hour and it gives me a perfect track.
Yes, this is a feature. As given in the documentation location manager object manages power aggressively by turning off hardware when it is not needed. Turning off GPS hardware can lead to significant power savings.