I've been running into problems queuing a build to a TFS Build Server with a specified shelveset. I'm running TFS 2012. I have a visual studio solution with many projects. I'll open the solution, make a change to a few .h header files in a few of the projects, and then make a shelveset for that changeset.
Next, I queue a build to the TFS server. In the build definition, I select the shelveset that I just created. However, when the TFS Build server processes that queued build, it behaves as if it ignored the shelveset. When the compiler processes those projects that have the modified files, the header files in the sources folder do not include the change in the specified shelveset.
Here's the interesting bit. I've watched the files created on the build server as the build is processed. When the sources folders are first created and populated, the changes in the specified shelveset are present. But by the time the build process gets to the relevant project files, the source files have been changed back to the version without the shelveset change.
As far as I can tell, the latest version of the source plus the selected changeset was copied to the build server, but when a build error occurred, the sources were replaced with the latest version only.
Not sure why that happens. When it first occurred it looked as if the sources were changing from 'latest+shelveset' to 'latest' before the build error. Now that I know that's not the case, I'm not going to worry about this any longer.
Related
When we do a TFS Build, can we alter the build output so that the output is limited to only the changes so that deployment payload is reduced ? Example:
When I build a solution, I should only get the changed dlls not all (which includes Microsoft and other 3rd party dlls which are never changed.
Configure CI solution in TFS 2015, and unchecked clean options, Since TFS 2015/2017 always delivered all files - changed and unchanged, but I need only changed. This trick doesn't solve the issue:
Build (TFS Build), only what is changed
Followed a couple of other sources.
IncrementalBuild property in TFSBuild project
Incremental builds in TFS
Applied these tricks to update project with few settings (IncrementalBuild =True, ForceGet=False, SkipInitilizeWorksplace=True, SkipClean=True) under PropertyGroup definition to the end of the TFSBuild.proj file.
But the issue still persists, we are unable to produce only changed binaries in build folder, there is always all files.
Please help me to achieve the desired build output.
Incremental builds only rebuild assemblies that don't depend on changed files. But it does copy all of the project output (subsequent projects that depend on it may depend on these assemblies and files being there).
This causes incremental builds to be much faster, but it doesn't "only deliver the changed files". It always delivers all files whether they are changed or unchanged. On top of this, you could have multiple agents and each agent can have multiple working folders, the incremental build could use any of these as base for the incremental builds, there is no guarantee that the changed files are between your previous build and the current one.
You'll have to implement this feature yourself, it has never been part of MsBuild or TFS Build. It would involve querying TFS for the last drop folder and performing a compare after running an incremental build. Then copying just the changed files and a log of deleted files.
PS: The TFSBuild.proj type builds are very deprecated. They have been surpassed by the XAML builds in TFS 2010 and have been considered "legacy" since then. They have subsequently been surpassed by the new VSTS/Azure DevOps build system which has deprecated the XAML builds. Most of the properties that interact with Source Control are ignored when a TFSBuild.proj project is executed in the Legacy XAML workflow. Instead, the XAML agent takes care of fetching the sources prior to passing control to MsBuild. These new VSTS/Azure Devops build tasks are now also getting YAML support for Git based source control repositories.
Actually first code is built and deployed after some updates developer changed the code and check-in the files now I want to build that files or folder and get that files artefact in drop folder? as well as how to deploy those files? in Tfs 2017 and it will automatically build only check-in files.
What you would like is to have an incremental build. When you add a Visual Studio Build / MSBuild task to build the project, just uncheck the Clean option. Thus it will sync the source and only get the changed files from the second time to build. See
Build task Arguments for details.
Clean Option : Set to False if you want to make this an incremental build. This setting might reduce your build time,
especially if your codebase is large. This option has no practical
effect unless you also set Clean repository to False.
Set to True if you want to rebuild all the code in the code projects.
This is equivalent to the MSBuild /target:clean argument.
However for artifacts, TFS always delivered all files - changed and unchanged.
It does copy all of the project output (subsequent projects that
depend on it may depend on these assemblies and files being there).
This causes incremental builds to be much faster, but it doesn't "only
deliver the changed files". It always delivers all files whether they
are changed or unchanged.
You could take a look at jessehouwing's reply in this question about this part: Incremental Builds issue in Team Foundation Server
When we do a TFS Build, can we alter the build output so that the output is limited to only the changes so that deployment payload is reduced ? Example:
When I build a solution, I should only get the changed dlls not all (which includes Microsoft and other 3rd party dlls which are never changed.
Configure CI solution in TFS 2015, and unchecked clean options, Since TFS 2015/2017 always delivered all files - changed and unchanged, but I need only changed. This trick doesn't solve the issue:
Build (TFS Build), only what is changed
Followed a couple of other sources.
IncrementalBuild property in TFSBuild project
Incremental builds in TFS
Applied these tricks to update project with few settings (IncrementalBuild =True, ForceGet=False, SkipInitilizeWorksplace=True, SkipClean=True) under PropertyGroup definition to the end of the TFSBuild.proj file.
But the issue still persists, we are unable to produce only changed binaries in build folder, there is always all files.
Please help me to achieve the desired build output.
Incremental builds only rebuild assemblies that don't depend on changed files. But it does copy all of the project output (subsequent projects that depend on it may depend on these assemblies and files being there).
This causes incremental builds to be much faster, but it doesn't "only deliver the changed files". It always delivers all files whether they are changed or unchanged. On top of this, you could have multiple agents and each agent can have multiple working folders, the incremental build could use any of these as base for the incremental builds, there is no guarantee that the changed files are between your previous build and the current one.
You'll have to implement this feature yourself, it has never been part of MsBuild or TFS Build. It would involve querying TFS for the last drop folder and performing a compare after running an incremental build. Then copying just the changed files and a log of deleted files.
PS: The TFSBuild.proj type builds are very deprecated. They have been surpassed by the XAML builds in TFS 2010 and have been considered "legacy" since then. They have subsequently been surpassed by the new VSTS/Azure DevOps build system which has deprecated the XAML builds. Most of the properties that interact with Source Control are ignored when a TFSBuild.proj project is executed in the Legacy XAML workflow. Instead, the XAML agent takes care of fetching the sources prior to passing control to MsBuild. These new VSTS/Azure Devops build tasks are now also getting YAML support for Git based source control repositories.
TFS is my repository, CC.NET is my build server. If I delete a file in Visual Studio or the TFS Powertools (Windows Explorer extension), and check that delete in, I can be reasonably confident that the file will NOT be deleted off my build server. As a result, builds often fail because of conflicting files (especially renamed files).
Has anybody else witnessed this behaviour? Is there a way to ensure such changes are reflected on the build server?
Thanks;
Duncan
Although we do not use TFS as source control, we do use CC.Net. As part of our build process, we clear the workspace of all files (using a Nant task) and then force a refresh of the files from our SCM.
Sounds like this would fix your problem.
I am attempting to use CI on a Branch of one of my TFS projects. MSBuild only fails when I try to use a Branch. I point the same Build at the "trunk" project it works fine.
The error I receive from the build log:
Task "Label"
Label TeamFoundationServerUrl="http://TFSServer:8080/"
BuildUri="vstfs:///Build/Build/6763"
Name="Test_SF_20090619.1"
Scope="$/MyProject" Recursive=True
Comments="Label created by Team Build"
Version="BuildServer3D143_66"
Child="Replace" Files="$/" C:\Program
Files\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets(812,5,812,5):
error : No matching items found in $/
in your workspace.
Done executing task "Label" -- FAILED.
Done building target "CoreLabel" in project
"TFSBuild.proj" -- FAILED.
I believe this error is being caused by a lack of source files getting copied to the Build server.
Get task excerpt from build log:
Task "Get"
Get TeamFoundationServerUrl="http://TFSServer:8080/"
BuildUri="vstfs:///Build/Build/6768"
Force=True Overwrite=False
PopulateOutput=False Preview=False
Recursive=True Version="C204806"
Workspace="BuildServer3D143_66"
Done executing task "Get".
This is a full build. There should be about a thousand files listed in the GET.
General Information
TFS 2008
Visual Studio 2008
Established build server (been
running builds for the last year)
Project being branched is a ASP.NET
web stie (2.0 Framework).
Full Build Params
/p:SkipClean=false
/p:SkipInitializeWorkspace=false
/p:ForceGet=true
/p:IncrementalBuild=false
/p:IncrementalGet=false
note: I know IncrementalBuild is redundent but I just wanted to be sure.
Questions:
Are there restrictions on builds off a branch?
Any idea why MSBuild fails to pull files from the branch workspace?
If it's for CI then you're most likely doing an Incremental Get. TFS will only bother to get files it thinks have changed since its last get - e.g. if you delete any files from your server, it will still think you have those files so it won't get them again. In this case you'll need to run the build once with the incremental properties turned off so that it forces a full get of the source. You can do this by overriding the properties in the MSBuild command line box in the Queue Build dialog with:
/p:IncrementalGet=false;ForceGet=true
Another possibility that springs to mind is that the Label task is confused by your branch. It may be that your workspace is set up incorrectly, so check that you're mapping in everything it needs.
I had two issues in this case.
First, the branch security did not give rights to the build service account. I had restricted the branch to our team's Tech Leads and Release Engineers. The build service account needed access as well. What tipped me of was while searching the internet I stumbled upon a posting by someone who had made the same mistake.
The second issue was a little more involved. While cleaning up my build project file, I removed the following section.
<SolutionToBuild Include="$(BuildProjectFolderPath)/../../_stage/MyProject/MySolution.sln">
<Targets></Targets>
<Properties></Properties>
</SolutionToBuild>
Which worked fine on projects I had already built at least once, but if this was a new build, that had not copied source files to the build server, then there would be no files and the build would fail.
Some of you may wonder if my other builds were working either, after all wouldn’t they have old build files. Yes, but I had targets defined that did all the work I actually cared about. So the SolutionToBuild is a little frivalous.