In all other instances I'm using a segue to transition to a tab bar controller, but I have a need now to load up a tab bar controller without a segue. To do this with a regular view I would use this:
EditProfileView *view = [[self storyboard] instantiateViewControllerWithIdentifier:#"editProfileView"];
[self.navigationController pushViewController:view animated:YES];
The EditProfileView is one of the tabs on my tab controller. How do I change this so that it loads all the tabs?
You should push the UITabBarController instead.
e.g.
UITabBarController *tc = [[self storyboard] instantiateViewControllerWithIdentifier:#"tabbarcontroller"];
[self.navigationController pushViewController:tc animated:YES];
Make sure the tabbarcontroller's storyboard ID is the same
Also, if you want to present one particular viewcontroller:
[tc setSelectedViewController:[tc.viewControllers objectAtIndex:0]];
Related
In my application i am launching one screen using present UIModalViewController and on that screen I have oneUIButton, if we click on that UIButton alert will come then select yes on alert view now we have to call another view usingpushviewcontroller. But screen is not coming if we use below code can any one help me.
[self.navigationController pushViewController:requestViewController animated:YES];
Try with one root navigation controller and then present your controller modally as follows :
FirstViewController *firstView=[[FirstViewController alloc]init];
UINavigationController *navigationController = [[UINavigationController alloc] initWithRootViewController:firstView];
[self presentViewController:navigationController animated:YES completion:nil];
and then for push another view as follow :
SecondViewController *secondView=[[SecondViewController alloc]init];
[self.navigationController pushViewController:secondView animated:YES];
It will work first using present modal viewController and then using push navigation viewControllers on to the stack.
I'm new on IOS platform and after study a little about how does it works, i had one doubt about how to call a new class/view and overlay the current view when a button is pressed. In android i do:
Intent intent = new Intent(a.class, b.class);
startActivity(intent);
Searching on internet, i noticed that i have to use navigation bars to do it. I start an app with tab bar controller and putted a navigation controller. I used the code below:
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"Storyboard" bundle:nil];
UIViewController *myController = [storyboard instantiateViewControllerWithIdentifier:#"Dicas"];
[self.navigationController pushViewController: myController animated:YES];
and the return:
There is a way to overlay the current view? I always have to use navigation bars to call another class (use bottom e upper controllers will make my app ugly)?
To hide the navigation bar:
[[self navigationController] setNavigationBarHidden:YES animated:YES];
To hide tab bar:
yourViewController.hidesBottomBarWhenPushed = YES;
You can also call another viewController by using presentViewController function of a viewController class.
[self presentViewController: myController animated:YES completion:nil];
As you said u want to overlay your current view so not sure but You can show your view controller using model view like this
yourViewController *secView = [[YourViewController alloc] initWithNibName:#"YourViewController" bundle:nil];
[secView setModalPresentationStyle:UIModalPresentationPageSheet];//u can use different UIModalPresentationStyle
[secView setModalTransitionStyle:UIModalTransitionStyleCoverVertical];
[self.navigationController presentViewController:secView animated:YES completion:nil];
Above one will show your view controller over existing view controller, once presented you need to make provision to dismiss this modal view.
Simple way to present new class or ViewController like this..
ViewController *view = [self.storyboard instantiateViewControllerWithIdentifier:#"ViewController"];
[self presentViewController:view animated:YES completion:nil];
I have 6 subclassed UIViewControllers connected with push segues with identifiers.
They go A>B>C>D>E>F. I am unable to find a way how to implement button in the controller A which would automatically stack all controllers up to controller F and display F controller. Stacking should be done in UINavigationController instance, not through(void)setViewControllers:(NSArray *)viewControllers animated:(BOOL)animated, because if I use setViewControllers method, then I lose segue identifiers. Ty!
You should be able to do it with pushViewController:animated:, like this:
// This method belongs to view controller A class
-(void)pushToF {
// I am assuming that A is already in the navigation controller
UINavigationController *nav = self.navigationController;
UIViewController *b =[self.storyboard instantiateViewControllerWithIdentifier:#"B"];
[nav pushViewController:b animated:NO];
UIViewController *c =[self.storyboard instantiateViewControllerWithIdentifier:#"C"];
[nav pushViewController:c animated:NO];
... // And so on, until F
UIViewController *f =[self.storyboard instantiateViewControllerWithIdentifier:#"F"];
// You can push the last one with animation, so that end users would see it
[nav pushViewController:f animated:YES];
}
I'm trying to move from 1st view controller -> 2nd view controller. However, it seems nothing is happening.
It is mainly from a sign-in page, so I don't need to get back to that page once I have a successful login. I'm trying right now from a button just to check.
I have 2 classes.
signInPage
optionsScreen
I need to go from 1 > 2
Inside signInPage.m
#import "optionsScreen.h"
- (IBAction)moveToNext:(id)sender {
optionsScreen *aSecondPageController =
[[optionsScreen alloc]
initWithNibName:#"optionsScreen"
bundle:nil];
[self.navigationController pushViewController:aSecondPageController animated:YES];
// [aSecondPageController release];
}
Screenshot of story board
https://drive.google.com/file/d/0B1y7ao4cGAYKaU0yRlVxcVg2bzA/edit?usp=sharing
Solution:
- (IBAction)moveToNext:(id)sender {
NSString * storyboardName = #"Main_iPhone";
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:storyboardName bundle: nil];
UIViewController * vc = [storyboard instantiateViewControllerWithIdentifier:#"optionsScreen"];
[self presentViewController:vc animated:YES completion:nil];
}
In storyboard add navigation view controller. As root view controller - perhaps by default it is table view controller, so remove it - set up 1st view controller. Adding navigation controller you can push to navigation stack as many view controllers as you want.
I think what you're trying to do is present the view controller modally, not push it onto the stack (which doesn't exist). Instead you should just do this. This will not show a back button by default so you'll have to add one manually:
optionsScreen *aSecondPageController = [[optionsScreen alloc] initWithNibName:#"optionsScreen" bundle:nil];
[self presentViewController:aSecondPageController animated:YES completion:nil];
To go back, in your optionsScreen view controller, you'll need some sort of back button right? So you can do this in your viewDidLoad:
self.navigationItem.leftBarButtonItem = [[UIBarButtonItem alloc] initWithTitle:#"Back" style:UIBarButtonItemStyleBordered target:self action:#selector(backPressed:);
Then you'll have to create a new method called backPressed:
-(void)backPressed:(id)sender {
[self dismissViewControllerAnimated:YES completion:nil];
}
Edit: it turns out you were trying to do what I explained above. I will leave the navigation controller bit for future reference.
If you are trying to use a navigation controller to push your options, which will give you a back button by default, then first, in your storyboard, click your sign in view controller, then at the menu bar at the top go to Editor > Embed In... > Navigation Controller. Then in your view controller switch method, you can do what you were trying before
optionsScreen *aSecondPageController = [[optionsScreen alloc] initWithNibName:#"optionsScreen" bundle:nil];
[self.navigationController pushViewController:aSecondPageController animated:YES];
I have a tab bar application. My requirement is I select the 'scan' tab to scan the qr code and navigate/jump immediatley to another 'list' tab. Both 'scan' and 'list' tab are there in the viewControllers array in didFinishLaunchingWithOptions After referring this link, i don't think i need to set the delegate as both the tabs are already present in the hierarchy.
I get this warning in the following line
if(x)
{
listViewCntrl = [[ListViewController alloc] initWithNibName:#"ListViewController" bundle:nil];
listViewCntrl.getFlag = YES;
[self presentViewController:listViewCntrl animated:YES completion:Nil]; // I get the warning here
}
If I comment out the above code and add
[self.tabBarController setSelectedIndex:1];
then I would not be able to get the subView of the listViewController (set flag to show the subview) which i need to display inside the list tab after scanning.
App crashes if I add
[self.tabBarController setSelectedViewController:listViewCntrl];
So how do I display the listView's subview after scanning?
You can try this if you use storyboard:
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"MainStoryboard" bundle:nil];
ViewController * destViewController = [storyboard instantiateViewControllerWithIdentifier:#"ViewControllerIdentifier"];
[self.navigationController pushViewController:destViewController animated:YES];
You have to set an identifier for your controller in your storyboard.
ListViewController *listController = (ListViewController*)[self.tabController viewControllers][1];
listController.getFlag = 1;
[self.tabBarController setSelectedIndex:1];
The problem is that you're creating an entirely new ListViewController. You say you already have one in the tab controller - you don't need a new one.
You can't use your 3rd option because, again, the two ListViewController's are different objects (they may be of the same class, but they point to a different address).