I am gonna design a component in IOS, in which we will have Table view and Grid View; means user can see his data in table or grid. So what i am doing is i added a UIViewController and added two child view controller one for table and another one for collection view. I am handling everything using UIViewController only. Its means when user wants to use my component he has to add as a child view controller only. My question is that "Is it the best practice to use UIViewController like i am doing or Should I convert everything to UIView because UIView is light weight." I am gonna write only presentation logic in my component. We will get data from outside using delegate. And if i should use UIView then when should i use UIViewController?
Thanks
Your current approach is correct.
UIViews should do one and only one thing: paint a view when asked to.
UIViewControllers are more complex. They are are responsible for setting up views with any data they need to do their job, compositing multiple views (or view controllers) together if needed, responding to events from view components or from the device in general, and communicating with the rest of the code/system.
Because your code wants to show two different kinds of information, it fits the UIViewController much better than the plain UIView style.
As you've pointed out, Apple themselves have many examples of UIView subclasses that have delegates and do complex things. However, if you're writing a new component and it is complex (as yours is), I seriously recommend going for the UIViewController approach.
A note on history: Apple used to be of the advice that UIViewControllers should only show/composit UIViews and not other UIViewControllers (even though, confusingly, they didn't always follow their own advice!). This would align with their making of some quite complex UIView subclasses. However, they changed this stance a while back, and added support to UIViewControllers for compositing other UIViewControllers' views inside them. If Apple's stance had always been as it is now, you might find that some of their UIView subclasses were implemented as UIViewControllers!
As an experiment, it would probably be quite educational to try and implement your component both ways. I predict that you'd find UIView approach more unwieldy, with you having manually re-plumb some of the 'wiring' that you'd get 'for free' with the UIViewController approach.
Avoid putting logic in UIView subclass.
As I think you can make grid view by using table view just simply add multiple views on each cells
at time of switching grid to list or list to grid simply check your type and reload tableview
Related
I went through lot of similar questions but still have not clearly understood this.
In terms of better design - what is right way - creating all the UIButtons, UILabels etc in the view controller itself and then add them as subviews, or should I create a custom view (#interface MyView : UIView) with all the required buttons/labels etc and then assign that view to the view property of View controller? I am not using interface builder.
Is there any real need/advantage of creating a custom view like this or adding everything in view controller itself should be okay/good idea? Sorry I am very new to iOS app development :-)
If someone could explain it to me - would be really helpful.
Some advantages of subclassing a view are:
Code separation. If you have a complex view and want to keep your viewcontroller clean, subclass and separate it out.
Reuse. If you reuse the view anywhere else it is possible with minimal effort when the view is it's own class.
You can choose what setup and methods to expose for setup
Some disadvantages of subclassing a view are:
View no longer will have access to view controller ivars.
View controller will no longer have direct manipulation on the view
You are constrained to what the view publicly exposes in terms of setup and config (may be a good thing).
Overall, there is no single best answer, it all depends on your setup and how you like to keep your project organized.
My non-answer : the answer lies in between these 2 opposite sides :
putting verything in the view Controller, using just basic views
using very elaborate views that abstract away some tedious graphic work.
To get an idea of what I'm talking about : one might implement a UITableView behaviour directly into a UIViewController with just a UIScrollView, and handle all the indexPath computation (depending on the amount of scrolling), views recycling, etc... in this very viewController.
But, as lists are a common way to visually display information, all this 'recycling view', 'setting content for currently displayed cells' has been moved into a custom view class : UITableView, and delegate and datasource patterns have been use to make this class behavior easily customizable.
Creating abstractions has its advantages and disadvantages.
I try to do things incrementally :
hold the most you can in viewController
when code becomes too complex, or if you see yourself needind the same kind of 'component' elsewhere : the create a custom view, and try to define its API (what properties it exposes, what implementation it hides)
View controllers are a nice way of separating the things that a view must do in the strict sense (handle input, render output) from the larger hierarchy, manipulation, and information routing of views around it, which the view controller coordinates.
Striking the right balance depends on a number of localized factors. A view which contains a label and an image (like a cell) could certainly "own" its subviews and appear to the controller like one container unit. But note in this case that the subviews are also supporting the input/rendering of the "cell" unit.
In that sense, if you have a large canvas with a set of actual controls that are "on top" of that canvas but not necessarily "owned" by it, the view controller would probably want to create and attach these into the view hierarchy.
Maybe this is a silly question, but I've bumped into it a number of times during iOS Development.
Sometimes I'll develop a view component that I want to use on multiple screens, so I'll decide to subclass UIView and make it something I can use in multiple places.
Then, I start adding functionality to it. Maybe it needs to respond to an NSNotification, or it is supposed to respond to user touches.
At a certain point, I start wondering if I should really be making a UIViewController subclass, and add it to my UI as a child ViewController.
Is there any consensus on where to draw the line between adding some behaviors to a UIView, and when to create a full UIViewController?
I can't tell you about the consensus, but here's my opinion:
Subclass UIView only when...
You want to do custom drawing
You need to customize some behaviour of an already existing UIView subclass
You have special needs for layouting subviews. Most layouting can be done by UIViewController, though.
Maybe for special touch handling that you can't be done with gesture recognizers
Subclass UIViewController in all other cases. You almost always need a controller anyway, for writing glue code that ties together views and models, or for handling user interaction. Consequently, Apple has made it easy in UIKit to let controllers do all the work and to keep views as "stupid" as possible. For instance, it is very simple to nest controllers to create complex view hierarchies, without the need to have a single view subclass.
An indicator that subclassing UIView is not the first thing one should do is the section titled "Alternatives to Subclassing" in the UIView class reference. An indicator that subclassing UIViewController is the preferred thing to do is that there is no such section in the UIViewController class reference :-)
You should use a controller anytime that you need to handle or control data. Views are supposed to be as stupid as possible, not knowing what they are displaying but rather where. You can easily subclass and reuse ViewControllers. A good example, say you need to retrieve a string (or text) from the user throughout your app via a popover controller and a modal. Create a generic subclass of UIViewController that has a view with a textfield and a button. You can then use this view and it's controller in any capacity you need. Reusing it in the popover, modal or anywhere else (and generally passing the data back through delegation). Since you are dealing with data you should not being using a sole subclass of UIView.
From my experience I subclass UIViewControllers more often then UIViews. It is a little difficult for me to understand if you are solely talking about Containers or reuse of views in general application workflow. Either way though it should be the same.
I've used the embedded view controllers to load reusable table views from time to time. I've found that it's useful sometimes but not always. Communication between the two can be cumbersome, like if you want the embedded controller to communicate back up to the container. Delegation makes it easier but still cumbersome. It also limits you to iOS 6, if I remember right iOS 5 and lower don't support embedded controllers.
If it's just adding methods you can use a category to store some extra methods. I do that a lot on NSManagedObjects that I don't want to subclass and if I regenerate the NSManagedObject from the datamodel I don't lose the code in my categories. Gives me added functionality like calculated fields or conversion methods without having to subclass. If you don't need those methods for a particular instance just exclude the reference to the category.
Subclassing never is bad though IMO.
If I want to build a generic UI Component (one that will handle its own view and logic, data source,
etc), is it a good practice to subclass UIViewController?
I would say no. But it depends. If your component manages other view controllers or has/will have any kind of logic that's not specific to a view (e.g. navigation logic, business logic etc) , then you should subclass a view controller. Then again that makes it more than an UI component.
Otherwise, you should subclass an UIView, like Apple does with many components, including UITableView (speaking of datasource), GLKView, UICollectionView.
My overly simplistic answer is "no, when building a generic component do not automatically start with a UIViewController subclass". However that alone is not a useful answer and in some cases a UIViewController subclass is exactly the right solution.
Instead let's consider how to decide what your component should be. I think the best way to figure that out is to answer three questions:
What is this component responsible for?
How do you want to interact with it?
What are its dependencies?
In all cases we can try to start as simple as possible and add complexity only when the answers to those questions require it.
Could this component just be a function? No objects, no classes, if all you want to add is some behavior then maybe all we need is a function. If this behavior only applies to specific existing types then maybe we need a category on an existing class.
Not enough to cover what we want to do? Ok, I guess we might be talking about a new type so let's create a class. Can it just be a subclass of NSObject?
Want to display something in a view? Ok, then we at least have a UIView subclass, maybe a UIControl subclass if it is more interactive.
The view needs some data to back it? No problem sounds like we now need two pieces; a view to display data and a data source to provide it. Here the view shouldn't need to know who creates and owns this data source. As long as one was provided to the view we can use it, anything else is outside of the view's area of responsibility. Similarly we might add a delegate to notify some other object of interactions with the view.
If we still haven't covered all of this component's responsibilities then maybe we need yet another piece, something in the controller layer to manage our view. We're still not (yet) talking about a UIViewController though! It's fine to have a "controller" or "service" that is a NSObject subclass. If all this piece needs to do is manage network connections, or map NSFetchedResultController results to our view's data source protocol and update the view, or just provide a convenient implementation of the most common mapping of model objects to the view's data source then a simple "controller" object is still all we need.
Still not enough? Finally we get to the point where we consider providing a UIViewController subclass. Maybe we want to allow users of the component to just present a modal view controller to hand off responsibility for an interaction (send an email, compose a tweet). Maybe there's a common set of default behaviors we want to provide that are tied to view controller life cycle events (UITableViewController flashing scroll bars in -viewDidAppear:).
Build your component from the pieces you need to support the behaviors you want to provide but keep it as small and simple as possible.
Yes, it's good practice in many cases. The iOS SDK contain many examples of UIViewController subclasses. A few of them contain only a small amount of generic behavior and are essentially useless without customization:
GLKViewController
UICollectionViewController
UITableViewController
And some of them provide significant generic behavior but are still mainly containers for your own view controllers:
UINavigationController
UIPageViewController
UISplitViewController
UITabBarController
But most of them are essentially complete packages with little or no need (or ability) to customize their behavior:
ABNewPersonViewController
ABPersonViewController
ABUnknownPersonViewController
EKCalendarChooser
EKEventEditViewController
EKEventViewController
GKAchievementViewController
GKFriendRequestComposeViewController
GKGameCenterViewController
GKLeaderboardViewController
GKMatchmakerViewController
GKTurnBasedMatchmakerViewController
MFMailComposeViewController
MFMessageComposeViewController
MPMediaPickerController
MPMoviePlayerViewController
PKAddPassesViewController
QLPreviewController
SKStoreProductViewController
SLComposeViewController
TWTweetComposeViewController
UIActivityViewController
UIImagePickerController
UIReferenceLibraryViewController
UIVideoEditorController
If you think about what all of these have in common, you may conclude that they all have two things in common:
Each has a specific model (in the MVC sense) that it interacts with, and that model is not specific to your app. The models vary widely (UIVideoEditorController's model is a single video; UIImagePickerController's model is the entire photo library; GKAchievementViewController's model is a database possibly on an Apple server in “the cloud”), in some cases you provide the model (or some properties of the model) up front, and in some cases you receive the model (or a fragment of it) at the end. But in every case, the view controller handles all the interaction between the user and the model with little or no ongoing help from your app.
Each provides its own view hierarchy, with little or no customization required (or even permitted).
In other words, each of these view controllers isn't just the “C” of an MVC pattern. It's the tip of an entire MVC iceberg.
If your component is also an MVC iceberg, then exposing the tip of your iceberg as a UIViewController subclass is quite appropriate.
It depends on the iOS version you used.
A. prior to iOS 5.0, It's not a good practice, and not recommend.
B. start with iOS 5.0, It's just ok.
subclass a view controller for a UI component (UIView), , that means you wanna use the view controller life cycle method, to manage the user interaction and view display procedure, data model etc. So, if the life cycle method can not easily automatic called, the view controller is not that meaningful.
start with iOS 5.0, it's possible to create custom view controller container, so, it's ok to build custom generic ui component with view controller to add as a child view controller.
prior to iOS 5.0. Subclass a UIView with custom delegate protocol is the right way. one other thing is about the code organize. put the all custom delegate method to another custom class, not in the view controller, in the view controller just init a delegate class instance, and set this to the view delegate property.
Often, when I'm making my apps, I'm in this situation : I have a UINavigationController, handling the view stack, some UIViewControllers, controlling their respective views...
But when I want to add several custom UIViews in my mainView, I don't know how to manage my code.
Each UIViewController needs to handle one and only one view (wich normally occupy all the screen size), and a view should not control their content (update it a the extrême limit).
You can't neither do this :
[myViewController1.view addSubview:childViewController.view];
So if I want to achieve something like this, what should I do ?
The orange parts have to be 3 instances of the same UIView(Controller?), but with a content depending of a NSObject (User, obviously).
I think this very important to segment your content, this should be an easy problem, but I found a lot of contradictory answers so, what's the best practice to handle this common issue?
Theses orange views should be instances of UIViewControllers in order for it to handle their UITableViewDatasource? Is addChildViewController relevant in this case?
I already found a lot of things which work, but I don't know what should I do...
Also, I'm using xibs.
Thanks in advance if you can help me (and other people I think).
You can do it either way (view or view controller) depending on how you want to handle things. Certainly, you can have one object be the data source for multiple tables, so in that case, you would just add multiple views. If, however, you want to keep your code more compartmentalized, then add view controllers, and have each control its own view -- to do this, you do need to use addChildViewController, and use the methods that Apple describes for creating custom container controllers. Alternatively, you can use container views in a storyboard which makes the process of creating custom container controllers simpler.
You're on the right path... Create separate instances of your subviews, and add them to your view. If you will have more than 3 (for instance, imagine coverview for your music, and you could scroll indefinitely left and right), I'd take a look at UICollectionViewController ... That will help manage cell re-use.
But, if it's just 3, just create three instances with different frames and add them to your view.
Here's how I'd do it:
each orange box will be a custom view (inherits from UIView)
the view will have the label, image and the tableview.
since you are not sure of the number of instances of these views you'd be using, its better to use some kind of tagging, so that you can have one place for the datasource and delegate methods of the tables in these orange views.
in the datasource and the delegate methods, you can make use of the tableView.tag (same as the orangeView.tag property).
I personally dislike having more than one viewController in a view (except the splitVC), probably because I haven't had a such requirement.
I dont see how a uiviewcontroller for orange box would help, over a uiview.
as #James Boutcher mentioned in his answer, UICollectionViews will simplify this issue further.
Why not creating a UIView class and overriding the drawRect method and then adding subView for this class in your myViewController1.view
I have a UIView subclass which contains some labels, a tableview, and a few other bits an pieces. It is currently the delegate and datasource for the tableview, and also manages many UI actions, none of which rely on data. For example, when an 'edit' button is pressed, it knows how to update its controls, but it won't do anything when 'save' is pressed besides switch the controls back to the previous state. All of this is done in code, I'm not using IB at all in this application.
I now want to plumb in all the data model changes that it can provoke. But I would like to put these in a new controller class, which I guess is the MVC compliant way to do things. I'm not sure how to get there.
First, I need to create a custom controller class. Should I be exposing from the UIView subclass a few of the controls so that the view controller can access them? For example, I will need to read and write to a textfield in the view, so should I provide a getter/setter for this?
Secondly, the tableview - instead of the UIView being the delegate, should I expose this also, and make the view controller the delegate? I.e. view.tableView.delegate = self from the UIViewController?
And finally, how do I launch the view from another view? Specifically, this is a paged scrollview application similar to the weather app, so I have a mainView UIView that specifies the single paged scrollview and then adds multiple custom UIViews, one for each page. How do I replace [scrollView addSubview:myCustomView] and instead add the viewController? And how do I connect the view to it's controller and vice versa?
I've not tried all of this without IB before so thanks for helping.
Your question is very broad, and part of the answer would depend on how you code your solution. I will try replying with a few hints of what works for me:
View: As a general rule of thumb, keep in mind that a view object should be something very generic, that knows nothing about other views outside of its own hierarchy. As such, a view should not rely on any specific interaction with other views, but rather communicate back to its delegate / owner / creator through callbacks, protocols, blocks, etc, when needed.
View Controller: Any time you need to make two views in different hierarchies interact with one another, my suggestion is that you stick to handling that interaction through the view controller. By doing so, you'd be making sure your view is not contaminated by code that would be useless in a different screen.
Also please keep in mind that UIViewController for iOS is intended to be a class that you use for handling the complete visible view hierarchy, as opposed to acting as the controller for a single view. As such, I recommend that you don't attempt have a controller for each view, but rather a single one to handle them all.
Publishing view elements: How much a UIView exposes as public in its header file is up to your implementation. Any method that handles the way the view looks, that looks to be generic and reusable, and that doesn't need anything from outside the scope of the view's tree, is surely something you want to include in it's implementation and publish in the header file.
The same goes for any property that you feel is highly probable that someone from the outside will need to access.
Suggestion: publish only what's really needed. Usually publishing new methods and properties is easier than removing them later on.