Related
I know it sounds like this question has a simple answer, but hear me out. Although UIStatusBar is a subclass of UIView, you can't use the addSubview method to add a subview to it because it doesn't use it. The same goes for UIStatusBarWindow. Neither the view or window have a viewcontroller, so I can't hook into that in any way.
Here is the relevant section of code. The line where I call the addSubviews method on self is the issue, because addSubviews isn't a method of UIStatusBar.
#import <CoreGraphics/CoreGraphics.h>
#interface UIStatusBar : UIView
#end
%hook UIStatusBar
- (void)layoutSubviews {
//Round corners under status bar
CGFloat radius = 15;
CGRect wholeScreen = [[UIScreen mainScreen] bounds];
UIView *roundedCorners = [[UIView alloc] initWithFrame: CGRectMake(-radius, 20-radius, wholeScreen.size.width+2*radius, wholeScreen.size.height-20+2*radius)];
roundedCorners.layer.borderWidth = radius;
roundedCorners.layer.cornerRadius = 2*radius;
roundedCorners.layer.borderColor = UIColor.blackColor.CGColor;
roundedCorners.userInteractionEnabled = NO;
[self addSubView:roundedCorners];
}
%end
Is there another way I can add the subview? The reason I'm trying to do it this way is so that, whenever the status bar is hidden, my roundedCorners view is also hidden. I could hide it whenever the status bar is hidden, but due to different apps using many different methods of hiding the status bar that doesn't work out as well as I hoped.
I think a solution here is to use the notifications delivered whenever the status bar's height changes.
Using either/both:
UIApplicationWillChangeStatusBarFrameNotification
UIApplicationDidChangeStatusBarFrameNotification
or you can also use the AppDelegate methods that get called when the status bar changes frame:
-application:willChangeStatusBarFrame:
-application:didChangeStatusBarFrame:
You can in these methods adjust your rounded corners according to the status bar's new frame. Hopefully this solves you problem!
I am building an iOS 7-only app. I am trying to set a UISearchDisplayController into the navigation bar.
I have it set up like this: In the storyboard, I added a "Search Bar and Search Display Controller" to my view controller's view, and set it at (0,0) relative to the top layout guide. I set constraints to pin to left, top and right. (I played with the constraints, i removed them completely, it doesn't matter) On top of that I have my Table view. When I added the search bar to the view in the storyboard, it automatically setup outlets for searchDisplayController and searchBar delegate. In code I have self.searchDisplayController.displaysSearchBarInNavigationBar = YES; I have two problems:
1) Without any buttons showing for the search bar (Interface builder -> select search bar -> Options: none selected) the search bar is in the middle of the screen:
If I click on the navigation bar, it starts editing the search bar:
notice also that the dark overlay appears to be offset from the navigation bar. It seems to me that the space is the same height as the navigation bar. Like it has been shifted down by that much. Also, when it displays the search results, the top of the content view is shifted down by the same amount (more pictures follow), which brings me to the second problem.
2) I messed around with it for a while and decided to check the option to have it show the cancel button. Now I have the search bar embedded in the nav bar correctly, but the overlay is still shifted down:
Again, when the search results table view appears, it is shifted down by the same amount (notice the scroll bar on the right side):
Even more bizarrely, I set a border on the search display controller's tableview layer, and it appears correct:
I have never used the UISearchDisplayController before and I unfamiliar with how to set it up, but functionally it works fine. I have read some other similar posts but the only advice is to hack it up by adjusting frames and setting manual offsets. I'd prefer to know what is causing this, is it a bug? Something I'm doing wrong? If it's a bug I can wait for a fix. It seems like such a basic thing that a thousand people must have done without any problem so I feel like I'm not setting it up correctly somehow. Thanks for you input.
I remember running into the same exact problem that you are observing.There could be a couple of solutions you can try.
If you are using storyboards
You should click on the view controller or TableView Controller which you have set up for your tableview and go to its attribute inspector and look under ViewController section and set the Extend Edges section to be under Top Bars.
If you are not using storyboards you can manually set the settings using the viewcontrollers edgesForExtendedLayout property and that should do the trick. I was using storyboards.
In my case, using storyboards, I had to check both Under Top Bars and Under Opaque Bars and leave Under Bottom Bars unchecked.
In my case, I actually had to uncheck all the Extended Edges boxes (essentially the same as programmatically setting Extended Edges to UIRectEdgeNone I believe) in my Storyboard in order to stop my search bar from offsetting itself. Thank you guys!
definesPresentationContext = true
override func viewDidLoad() {
super.viewDidLoad()
searchController = UISearchController(searchResultsController: nil)
searchController.searchResultsUpdater = self
searchController.hidesNavigationBarDuringPresentation = false
searchController.dimsBackgroundDuringPresentation = true
searchController.searchBar.searchBarStyle = UISearchBarStyle.Prominent
self.tableView.tableHeaderView = searchController.searchBar
definesPresentationContext = true
or see UISearchBar presented by UISearchController in table header view animates too far when active
My problem was just Adjust scroll view inserts. After change to false I didn't have problem
I had a same problem. And I solve this issue with adding view object under the tableview.
Add new ViewController on the Storyboard
Drag TableView to the new VC
Drag Table Cell to the TableView
Make a Connection for TableView DataSource, TableView Delegate to the new VC
I had very similar behavior happening. For me, the solution was to uncheck Extend Edges Under Top Bar in the storyboard settings for the parent view controller (I've turned off transparent navbars, not sure if that effects anything). If you're not using storyboard, you have to set [UIViewController edgesForExtendedLayout].
From the Apple docs:
This property is only applied to view controllers that are embedded in containers, such as UINavigationController or UITabBarController. View controllers set as the root view controller do not react to this property. Default value is UIRectEdgeAll.
Unfortunately none of the above solutions worked for me, I'm using a UITableViewController.
This link helped:
http://petersteinberger.com/blog/2013/fixing-uisearchdisplaycontroller-on-ios-7/
I put the code below for convenience:
static UIView *PSPDFViewWithSuffix(UIView *view, NSString *classNameSuffix) {
if (!view || classNameSuffix.length == 0) return nil;
UIView *theView = nil;
for (__unsafe_unretained UIView *subview in view.subviews) {
if ([NSStringFromClass(subview.class) hasSuffix:classNameSuffix]) {
return subview;
}else {
if ((theView = PSPDFViewWithSuffix(subview, classNameSuffix))) break;
}
}
return theView;
}
- (void)correctSearchDisplayFrames {
// Update search bar frame.
CGRect superviewFrame = self.searchDisplayController.searchBar.superview.frame;
superviewFrame.origin.y = 0.f;
self.searchDisplayController.searchBar.superview.frame = superviewFrame;
// Strech dimming view.
UIView *dimmingView = PSPDFViewWithSuffix(self.view, #"DimmingView");
if (dimmingView) {
CGRect dimmingFrame = dimmingView.superview.frame;
dimmingFrame.origin.y = self.searchDisplayController.searchBar.frame.size.height;
dimmingFrame.size.height = self.view.frame.size.height - dimmingFrame.origin.y;
dimmingView.superview.frame = dimmingFrame;
}
}
- (void)setAllViewsExceptSearchHidden:(BOOL)hidden animated:(BOOL)animated {
[UIView animateWithDuration:animated ? 0.25f : 0.f animations:^{
for (UIView *view in self.tableView.subviews) {
if (view != self.searchDisplayController.searchResultsTableView &&
view != self.searchDisplayController.searchBar) {
view.alpha = hidden ? 0.f : 1.f;
}
}
}];
}
// This fixes UISearchBarController on iOS 7. rdar://14800556
- (void)correctFramesForSearchDisplayControllerBeginSearch:(BOOL)beginSearch {
if (PSPDFIsUIKitFlatMode()) {
[self.navigationController setNavigationBarHidden:beginSearch animated:YES];
dispatch_async(dispatch_get_main_queue(), ^{
[self correctSearchDisplayFrames];
});
[self setAllViewsExceptSearchHidden:beginSearch animated:YES];
[UIView animateWithDuration:0.25f animations:^{
self.searchDisplayController.searchResultsTableView.alpha = beginSearch ? 1.f : 0.f;
}];
}
}
- (void)searchDisplayControllerWillBeginSearch:(UISearchDisplayController *)controller {
[self correctFramesForSearchDisplayControllerBeginSearch:YES];
}
- (void)searchDisplayControllerDidBeginSearch:(UISearchDisplayController *)controller {
[self correctSearchDisplayFrames];
}
- (void)searchDisplayControllerWillEndSearch:(UISearchDisplayController *)controller {
[self correctFramesForSearchDisplayControllerBeginSearch:NO];
}
- (void)searchDisplayController:(UISearchDisplayController *)controller didShowSearchResultsTableView:(UITableView *)tableView {
// HACK: iOS 7 requires a cruel workaround to show the search table view.
if (PSPDFIsUIKitFlatMode()) {
controller.searchResultsTableView.contentInset = UIEdgeInsetsMake(self.searchDisplayController.searchBar.frame.size.height, 0.f, 0.f, 0.f);
}
}
Go to storyboard.
Click on the view controller.
Go to attribute inspector under the ViewController section.
Set the Extend Edges section to be Under Top Bars and Under Opaque Bars.
Make sure to un-check Under Bottom Bars.
I have a view controller in my app that has a navigation bar dragged on it in the storyboard. It was working fine in the iOS 6 but in iOS 7 it look like this:
The status bar and the navigation bar should no collide with each other. I have seen a lot of such questions on the stack overflow but they didn't of much help to me.
Some questions say that i should use this "self.edgesForExtendedLayout = UIRectEdgeNone;" but it didn't work. Some say i should remove the navigation bar and embed it inside the navigation controller that i cannot do due to the way my program is implemented. Some solutions suggests to use the view bounds and all but it didn't work for me as well.
What is the one thing that can help me resolve this issue. Thanks in advance!
UPDATE: I have embedded the view controller inside a uinavigation controller. Removed the navigation bar that was earlier manually added in it. Now it looks ok in the storyboard but when i run it, it shows the following:
It is showing text from another view controller that is currently behind it that is its parent view controller. Means its transparent now. Can anyone point out what i am doing wrong?
The latest version of the iOS has brought many visual changes and from a developer's point of view, the navigation and status bar are two noticeable changes.
The status bar is now transparent and navigation bar behind it shows through. The navigation bar image can even be extended behind the status bar.
First of all, if you are a beginner and have just started iOS development and are confused the way status bar and navigation bar is working, you can simply go through a blog post HERE that i found very useful. It has all the information related to navigation and status bar in iOS 7.
Now coming to the answer of your question. First of all i can see two different problems. One is that your status bar and navigation bar are both kind of colliding with each other as shown by you in the question with an image.
PROBLEM: Well the problem is that your have earlier dragged a navigation bar in your view controller which was working in iOS 6 correctly but with the arrival of iOS 7 SDK, this approach is resulting in status bar and navigation bar overlapping with each other.
SOLUTION to First Problem: You can either use UIBarPositionTopAttached or you can use view bounds and frames, i can also suggest and link you to Apple's documentation and bla bla bla but that would take some time for you to solve the issue.
The best and the most easiest way to solve this issue is to just embed your view controller inside a navigation controller and thats it. You can do it by just selecting the view controller and going to Editor > Embed In > Navigation Controller. (If there is any content on your old navigation bar, you can first drag it down, embed the view controller in navigation controller and then move the bar buttons on the new navigation bar and then delete the old navigation bar)
SOLUTION to Second Problem: This solution is for your specific question that you have mentioned in the update and is not for the general public reading this. As you can see that navigation and status bar is not visible and a transparent area is showing the parent view controller. I am not really use why you are facing this issue but most probably because of some third party library like ECSlidingView or any other is involved. You can select this view controller in your storyboard and set the background color of the view to be the same as your navigation bar. This will stop showing the parent view controller behind and your navigation bar and status bar will start showing. Now you can cover the rest of your view controller with text view or what ever your are using in it.
Hope this helps!
The navigation bar is too close to the status bar because starting in iOS 7, the status bar is more of an overlay over the whole view controller's view. Since your navigation bar is at (0, 0), the status bar will show on top of the navigation bar. To solve this, simply move the navigation bar down (or, as others have said), create a constraint between the navigation bar and the topLayoutGuide.
When you do that, you will see that there is now a 20 point gap between the navigation bar and the top of the screen. That's because you just moved the navigation bar down 20 points. "But UINavigationController can do it right!" Absolutely, and it does so by implementing UIBarPositioningDelegate on your view controller. This is a one-method protocol that should be implemented like this:
- (UIBarPosition)positionForBar:(id<UIBarPositioning>)bar {
return UIBarPositionTopAttached;
}
After adding your view controller as the delegate for the navigation bar, you'll notice the navigation bar is still shifted down 20 points, but its background will extend up underneath the status bar, just like in UINavigationController.
Another thing you're seeing is that the navigation bar is translucent, meaning anything underneath the navigation bar will be visible to some extent. The translucent property on UINavigationBar is set to YES by default on iOS 7. Before iOS 7, the default was NO.
you can simply do this:
1) add a constrain between the Navigation Bar and Top Layout Guide (select navigationBar, hold ctrl key and go to Bottom Layout Guide, unhold ctrl key)
2) select vertical spacing:
3) set constant to 0:
Result:
UPDATE
In your AppDelegate file you can add this:
func application(application: UIApplication, didFinishLaunchingWithOptions launchOptions: [NSObject: AnyObject]?) -> Bool
{
// Prevent Navigationbar to cover the view
UINavigationBar.appearance().translucent = false
}
I suggest you in your viewDidLoad method you try:
self.navigationController.navigationBar.translucent = NO;
(by default it is yes now)
https://developer.apple.com/library/ios/documentation/uikit/reference/UINavigationBar_Class/Reference/UINavigationBar.html#//apple_ref/occ/instp/UINavigationBar/translucent
This works for me i hope you also have same luck :).
Add below code in your view.
-(void) viewDidLayoutSubviews
{
CGRect tmpFram = self.navigationController.navigationBar.frame;
tmpFram.origin.y += 20;
self.navigationController.navigationBar.frame = tmpFram;
}
It basically change location of navigation bar.
This is new feature with IOS7. Instead of staring at 20 px navigation bar in IOS7 staring at 0 px. As a solution shift the whole view downwards to 20 px or you can use image for navigation bar with height 64px.
In case it still helps someone, this is what worked for me for moving the Navigation Bar little bit down in ios 7 and above:
-(void)viewWillLayoutSubviews
{
float iosVersion = 7.0;
if ([[[UIDevice currentDevice] systemVersion] floatValue] >= iosVersion) {
// iOS 7+
CGRect viewFrame = self.view.frame;
viewFrame.origin.y += 10;
self.view.frame = viewFrame;
}
}
On a device with ios 6.1 and below the Navigation Bar will be unchanged, as it was before.
And this is what I used to make the contents of the Status Bar lighter:
-(UIStatusBarStyle)preferredStatusBarStyle{
return UIStatusBarStyleLightContent;
}
If your UIViewController is NOT in a UINavigationController and you're using UIStoryBoard, you can set the "iOS 6/7 Deltas" to 20 for the delta Y, for every subview that needs to be offset from the UIStatusBar.
Using Swift:
As #Scott Berrevoets said in his answer you need to implement the method positionForBar in the protocol UIBarPositioningDelegate, but as the UINavigationBarDelegate protocol implements this protocol :
public protocol UINavigationBarDelegate : UIBarPositioningDelegate {
...
}
You only need to set the delegate of the UINavigationBar you set using Storyboard and implement the method and it's done, like in this way:
class ViewController: UIViewController, UINavigationBarDelegate {
#IBOutlet weak var navigationBar: UINavigationBar!
override func viewDidLoad() {
super.viewDidLoad()
self.navigationBar.delegate = self
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
// Dispose of any resources that can be recreated.
}
func positionForBar(bar: UIBarPositioning) -> UIBarPosition {
return UIBarPosition.TopAttached
}
}
NOTE:
It's worth to mention if you set the position of the y-axis of the navigation bar, let's say to 40 from the top, then it will extend underneath to the top from this position, to simulate the behaviour of the UINavigationController you need to set to 20 from the top.
I hope it will help you.
First, set UIViewControllerBasedStatusBarAppearance to NO in Info.plist.
Then, in AppDelegate's application:didFinishLaunchingWithOptions: method add:
if ([[[UIDevice currentDevice] systemVersion] floatValue] >= 7) {
[application setStatusBarStyle:UIStatusBarStyleLightContent];
self.window.clipsToBounds = YES;
self.window.frame = CGRectMake(0, 20, self.window.frame.size.width, self.window.frame.size.height-20);
self.window.bounds = CGRectMake(0, 20, self.window.frame.size.width, self.window.frame.size.height);
}
return YES;
In iOS 7 app occupies 100 % of screen size.This not a problem .
http://www.doubleencore.com/2013/09/developers-guide-to-the-ios-7-status-bar/
in earlier iOS window start after statusbar and in iOS 7 window starts from 0px in earlier version view height is 460 (iPhone 4s and earlier) and 548 (iPhone 5) but in iOS 7 view height is 480 (iPhone 4s and earlier) and 568 (iPhone 5 and later) so you have to start view arrangement after 2o px or you have to start view from 20px.
you can write below code in rootviewcontroller or in all viewcontroller for set view from 20px
#define IOS7_HEIGHT 64
- (void)viewDidLayoutSubviews {
NSString *currSysVer = [[UIDevice currentDevice] systemVersion];
if ([currSysVer compare:#"7.0" options:NSNumericSearch] != NSOrderedAscending)
{
CGRect frame=[self.view frame];
if (frame.origin.y!=IOS7_HEIGHT) {
frame.origin.y = IOS7_HEIGHT;
frame.size.height -= IOS7_HEIGHT;
[self.view setFrame:frame];
[self.view layoutSubviews];
}
}
}
here height is 64 because 20 for statusbar and 44 for navigationbar.
try below code it will help you. and your problem will be solved.
For the ones who are having problems implementing #Masterfego 's solution (which is also the official, but I have had problems with Xcode 6.3 and automatic constraints), this is what I did:
I have a UIViewController with an added Navigation Bar. I selected the NAvigation bar and added a height constraint of 64px. We later see a warning that the navbar will be higher (but this is what we do). Finally, you can see that the Status bar looks nice and has the same color as the navbar. :)
PS: I can't post images yet.
You can probably create constraints that are attached to the top layout guide to specify the navigation bar's position relative to the status bar. See the iOS 7 UI Transition Guide: Appearance and Behavior section for more information about using the layout guides.
it's the best answer.
But I wanted know how to use a Storyboard and dragged UINavigationBar on it.
When I implemented the delegate method, and set the return result to UIBarPositionTopAttached, it did not work.
- (void)viewDidLoad{
self.navigationbar.delegate = self;
}
- (UIBarPosition)positionForBar:(id<UIBarPositioning>)bar{
NSLog(#"Got it");
//
// CGRect frame = self.navigaitonBar.frame;
//
// frame = CGRectMake(0, 20, CGRectGetWidth(frame), CGRectGetHeight(frame));
// self.navigaitonBar.frame = frame;
//
// NSLog(#"frame %f",frame.origin.y);
return UIBarPositionTopAttached;
}
If you use Xcode 6 and Swift, you can make it:
Open to info.plist file of your app.
Add a ViewControllerBasedStatusBarAppearance Boolean key if it is not existing and assign value “NO”.
Add “Status bar style” key if it is not existing and select “Opaque black style” value to it.
I was facing issue when full screen ModalViewController was opening from my MainViewController, NavigationBar position was getting changed when user was coming back to MainViewController from ModalViewController.
Issue which I noticed is status bar height was not getting included when user came back to MainViewController. Please debug and check origin of your NavigationBar before and after coming back to your ViewController.
// This method will adjust navigation bar and view content.
private func adjustNavigationControllerIfNeeded() {
var frame = self.view.frame
let navigationBarHeight = self.navigationController!.navigationBar.frame.size.height
if(frame.origin.y == navigationBarHeight && !UIApplication.shared.isStatusBarHidden) {
// If status bar height is not included but it is showing then we have to adjust
our Navigation controller properly
print("Adjusting navigation controller")
let statusBarHeight = UIApplication.shared.statusBarFrame.height
frame.origin.y += statusBarHeight // Start view below navigation bar
frame.size.height -= statusBarHeight
self.view.frame = frame
self.navigationController!.navigationBar.frame.origin.y = statusBarHeight // Move navigation bar
}
}
And call it from viewWillAppear method -
override func viewWillAppear(_ animated: Bool) {
super.viewWillAppear(animated)
self.adjustNavigationControllerIfNeeded()
}
Im trying port my app to iOS7, but my custom TableViewController is showing the last row (cell) under the TabBar :(
Im searching a lot for it, but i dont find any solution. Can anyone help me?
My Custom Table View class
The error is shown in the blow screenshot (only is showing a part of last product because im draging to up to show the hidden product under the tabbar):
Thanks.
I've got the same problem and solved it using storyboard.
At Tab Bar Controller, go to attribute inspector, Simulated Metrics, and set the Bottom Bar to Opaque Tab Bar. That's it!
See image bellow for description.
Saudações! (Greetings!)
I found the answer to your question on another post, answered by dariaa, here:
Tab Bar covers TableView cells in iOS7
It worked great for me.
Please no credit for me, because I'm not the original guy who solved it.
In your custom TableViewController, add these two lines under [super viewDidLoad]:
- (void)viewDidLoad
{
[super viewDidLoad];
self.edgesForExtendedLayout = UIRectEdgeAll;
self.tableView.contentInset = UIEdgeInsetsMake(0., 0., CGRectGetHeight(self.tabBarController.tabBar.frame), 0);
}
My friends, I cannot tell you how badly I struggled from this. Not a single re-configuration of Story Board never helped me. The issue was exactly like in Original Post, I've managed to fix it using:
for swift 3
self.edgesForExtendedLayout = []
for objective-c
self.edgesForExtendedLayout = NO;
2 lines in viewDidLoad and that's it !
self.edgesForExtendedLayout = UIRectEdgeAll;
self.tableview.contentInset = UIEdgeInsetsMake(0.0f, 0.0f, CGRectGetHeight(self.tabBarController.tabBar.frame), 0.0f);
In iOS 7 viewController uses full height. There is a property introduced as
self.automaticallyAdjustsScrollViewInsets = NO;
set it to no. then check, or set UIEdgeInset if is not set right after it.
UIEdgeInsetsMake(top, left, bottom, right)
See here
https://developer.apple.com/library/ios/documentation/userexperience/conceptual/TransitionGuide/AppearanceCustomization.html
Edit: try also this
self.edgesForExtendedLayout = UIRectEdgeNone;
The root cause of this problem is that automaticallyAdjustsScrollViewInsets is effective only on the First scroll view in your VC's view Hierarchy. It is not documented by Apple, but it is the only way the VC will detect the scroll view needing to be modified unless you're using a UITableViewController.
So in order to fix your issue without manually adjusting the insets, do this:
Make sure "Adjust Scroll View Insets" is checked.
Make sure that the tableView is the first subview in the view Hierarchy.
(Move it upwards above all other elements)
UIViewController has two new properties to assist you : topLayoutGuide and bottomLayoutGuide. They return the height of the parent view controller's controls you need to avoid. In this case, bottomLayoutGuide will return the offset of the tab bar.
Your custom view controller is probably overriding a method and not invoking super's implementation where this would be done for you. I am guessing you are installing AutoLayout constraints or setting a view's frame manually to fill the view. You just need to include the value from [bottomLayoutGuide length] to your layout calculation. If you support rotation, you should update that value in willAnimateRotationToInterfaceOrientation:duration:.
UINavigationController and UITabBarController both have a transparency flag that can be set programmatically or in the storyboard.
The UINavigationController also has two flags that control if the content extends under the top or bottom bar. Again you can set them programmatically or in the storyboard. This will apply to all subviews.
Each UIViewController can set its own preference in code. The property is called edgesForExtendedLayout and you can set up all combinations.
Using those properties will allow AutoLayout and Springs'n'Struts to adjust the views the way you want them regardless of the device.
There are a lot more new properties in UIViewController that you will want to have a look at.
Try the following:
if ([self respondsToSelector:#selector(edgesForExtendedLayout)])
self.edgesForExtendedLayout = UIRectEdgeBottom;
I've got the same problem. One solution to it is to make the ToolBar not Translucent. Here's how to do it:
First select the tool bar from the document viewer
like here
Then uncheck Translucent like here
Hope this helps.
Thanks.
The problem was masked using:
-(void)viewDidLayoutSubviews
{
[super viewDidLayoutSubviews];
self.tableView.contentInset = UIEdgeInsetsMake(0, 0, 112, 0);
}
But it doesn't solve, because on each iPhone and on each app tableview i have a different space on bottom.
So this is a poor solution.
I dont know a way to solve it.
I solved my problem now, changing my BaseTableViewController to inherit from UIViewController to UITableViewController.
But using a TableView inside a UIViewController is not solved :(
Thanks.
maybe is not a right answer, also for that reason I post this answer so you can tell me if this answer could be a possible solution.
In my case, I like the translucent effect, so I have added a footer in the table and I have modified the scrollIndicators.
- (void)viewDidLoad
{
// Do any additional setup after loading the view.
[super viewDidLoad];
UIView *footer = [[UIView alloc]initWithFrame:CGRectMake(0, 0, self.agendaItemsTable.frame.size.width, self.tabBarController.tabBar.frame.size.height)];
self.agendaItemsTable.tableFooterView = footer;
self.agendaItemsTable.scrollIndicatorInsets = UIEdgeInsetsMake(0, 0, self.tabBarController.tabBar.frame.size.height, 0);
}
What do you think?
I had the same problem, and the up-voted answers did not solve it. See my answer to a similar question, Tab Bar covers TableView cells in iOS7.
I solved the issue by manually setting the table view's frame in the table view controller's viewWillAppear: method to the height of the screen - (status bar height + nav bar height + tab bar height).
- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
// Adjust height of tableview (does not resize correctly in iOS 7)
CGRect tableViewFrame = self.tableView.frame;
tableViewFrame.size.height = [self heightForTableView];
self.tableView.frame = tableViewFrame;
}
- (CGFloat)heightForTableView
{
return CGRectGetHeight([[UIScreen mainScreen] bounds]) -
(CGRectGetHeight([[UIApplication sharedApplication] statusBarFrame]) +
CGRectGetHeight(self.navigationController.navigationBar.frame) +
CGRectGetHeight(self.tabBarController.tabBar.frame));
}
If anyone finds a better solution to this problem, please share!
For those like xarly who want the translucent effect, and for an Autolayout solution (without setting frames), see my answer here https://stackoverflow.com/a/26419986/1158074
I had a similar problem with collection view. Changing the collection view frame and content inset below fixed it for me...
guard let cv = collectionView,
let tabBar = tabBarController?.tabBar else { return }
// Resize collection view for tab bar
let adjustedFrame = CGRect(origin: cv.frame.origin,
size: CGSize(width: cv.frame.width, height: cv.frame.height - tabBar.frame.height))
cv.frame = adjustedFrame
// Adjust content inset for tab bar
let adjustedContentInsets = UIEdgeInsetsMake(0, 0, tabBar.frame.height, 0)
cv.contentInset = adjustedContentInsets
cv.scrollIndicatorInsets = adjustedContentInsets
Good luck!
After updating to Xcode 5, the navigation bars in all of my app's views have shifted down. Here are some screenshots, the first showing everything in the view as it's pulled down, and the second showing all of it untouched. The search bar should begin where the navigation bar.
Anyone know how I can fix this?
edit: i have tried this previously recommendation:
if ([self respondsToSelector:#selector(edgesForExtendedLayout)])
self.edgesForExtendedLayout = UIRectEdgeNone;
But it yields very odd results.
This may be because I have a "slide menu" under this view controller that is appearing due to the transparency of the navigation bar.
Set the navigation bar's translucent property to NO:
self.navigationController.navigationBar.translucent = NO;
This will fix the view from being framed underneath the navigation bar and status bar.
If you have to show and hide the navigation bar, then use
if ([self respondsToSelector:#selector(edgesForExtendedLayout)])
self.edgesForExtendedLayout = UIRectEdgeNone; // iOS 7 specific
in your viewDidLoad method.
In iOS 7 by defaults all Controller translucent property value is YES, so you set translucent property NO for this issue.
self.navController.navigationBar.translucent = NO;
You can disable
the "Extend edges" in Attribute inspector of View Controller of this screen (as shown in below image)
:
This works for swift as well on iOS 8.1
navigationController?.navigationBar.translucent = false
If you want to keep the translucency on your navigationBar, at the end of your viewDidLoad or in your viewWillAppear add this line of code:
[self.view sendSubviewToBack:self.tableView]
Somehow if your scrollView subclass (UITableView, UICollectionView, etc.) is at index 0 in your current view subviews, it will automatically adjust the insets according to your navigationBar. And it shouldn't affect your UI in versions prior to iOS7 either.
EDIT
If you initialize your UITableView programmatically, then it is best to add it to the view using this [self.view insertSubview:self.tableView atIndex:0];
Swift 4:
Set following line of code in viewDidLoad method:
self.navigationController?.navigationBar.isTranslucent = false
You can add this method into your view controller as shown on this URL:
-(void)viewDidLayoutSubviews
{
[super viewDidLayoutSubviews];
self.searchBar.frame =
CGRectMake(0, self.topOfViewOffset, self.searchBar.frame.size.width, self.searchBar.frame.size.height);
}
Another approach is to set self.automaticallyAdjustsScrollViewInsets = YES; on your view controller.
This is enabled by default. But in your case:
I see you are using EGORefreshHeaderView. It plays with contentInset of UITableView. So when you release it, header will reset top inset instead of restore previous value.
If you want to have complete control on views and avoid faulty adjustments of iOS, subclass UITableView and adjust the insets (both scroll and indicators) in -(void)willMoveToWindow:(UIWindow *)newWindow. Works for me.
Another option is to open your Info.plist file in source code mode and enter the following info:
<key>UIViewControllerBasedStatusBarAppearance</key>
<false/>
<key>UIStatusBarHidden</key>
<true/>
Hope this helps.