ASP .NET MVC4
Class #1:
public class F61BPROD
{
public int WPDOCO { get; set; }
public string WPDCTO { get; set; }
public string WPMCU { get; set; }
public string WPLOCN { get; set; }
public string WPDCT { get; set; }
public int WPTRDJ { get; set; }
public string WPKYPR { get; set; }
public string WPLITM { get; set; }
public decimal WPTRQT { get; set; }
public string WPKYFN { get; set; }
public string WPLOTN { get; set; }
public string WPLRP1 { get; set; }
public string WPLRP2 { get; set; }
public string WPLRP3 { get; set; }
public string WPLRP4 { get; set; }
public string WPLRP5 { get; set; }
public string WPLRP6 { get; set; }
public string WPLRP7 { get; set; }
public string WPLRP8 { get; set; }
public string WPLRP9 { get; set; }
public string WPLRP0 { get; set; }
public string WPFLAG { get; set; }
public string WPLOT1 { get; set; }
public string WPLOT2 { get; set; }
}
For one of the properties of Class #1 i need to fetch one of Class #2:
public class JDEItemBasic
{
public int itm { get; set; }
public string litm { get; set; }
public string dsc { get; set; }
public string dsce { get; set; }
public string ean14 { get; set; }
public string cc { get; set; }
public string uom1 { get; set; }
public string uom2 { get; set; }
public int uom1ea { get; set; }
public int bxuom1 { get; set; }
public int uom1gr { get; set; }
}
There is a DAL that gets the above classes. I need to combine these classes a new class that will have most of the properties of the above classes.
Should i create a third class and do the job in BLL?
or should i do it in UI using LINQ to Entities after i fetch them?
Should i create a third class and do the job in BLL?
or should i do it in UI using LINQ to Entities after i fetch them?
That would depend on where you need this class. If it is for displaying purposes then it should live in the UI. This class even has a name in this case: it's called a view model and is what your controller action could pass to the view after querying your DAL layer and projecting the various results to this view model.
Related
My portal has worked fine for several years but nowadays I have problems with my some codes. I want to update my code but at the first step I have problems with login page. when I use FirstOrDefault I got error on object reference while the list is filled and contains 1 user.
int g = db.sp_GetUserData_ByUserName(model.UserName.Trim()).Count();
//it shows 1
OSUserData userData1 = db.sp_GetUserData_ByUserName(model.UserName.Trim()).FirstOrDefault();
I didn't change this code and It works perfectly on the portal. However, I can't run it on my development server.
I checked again and I found that OSUserData constructor throws exception : Enumeration yielded no result. this is my class code :
public OSUserData()
{
this.OSUploadedFilesMultipleUsers = new HashSet<OSUploadedFilesMultipleUser>();
this.OSSalaryLists = new HashSet<OSSalaryList>();
this.OSUploadedFiles = new HashSet<OSUploadedFile>();
}
public int Id { get; set; }
public string Address { get; set; }
public string BranchCode { get; set; }
public string BranchParentNationalCode { get; set; }
public string CitName { get; set; }
public string City { get; set; }
public string CompanyName { get; set; }
public string CouName { get; set; }
public string Country { get; set; }
public string FaxNo { get; set; }
public string FollowCode { get; set; }
public string Hozeh { get; set; }
public Nullable<bool> IsBranch { get; set; }
public string LoginStatus { get; set; }
public string NationalCode { get; set; }
public string NewEconomicNo { get; set; }
public string Oldeconomicno { get; set; }
public string PostalCode { get; set; }
public string ProIdTTMS { get; set; }
public string ProName { get; set; }
public string Provision { get; set; }
public string RegistrationNo { get; set; }
public string State { get; set; }
public string TaxOfficeCode { get; set; }
public string TaxPayerType { get; set; }
public string TelCode { get; set; }
public string TelNo { get; set; }
public string TprId { get; set; }
public string UserName { get; set; }
public bool Validate { get; set; }
public bool Disabled { get; set; }
public string OwnerShipTypeDesc { get; set; }
public Nullable<byte> OwnerShipTypeCode { get; set; }
public bool Processed { get; set; }
public bool CheckedUser { get; set; }
public bool Blocked { get; set; }
public virtual ICollection<OSUploadedFilesMultipleUser> OSUploadedFilesMultipleUsers { get; set; }
public virtual ICollection<OSSalaryList> OSSalaryLists { get; set; }
public virtual ICollection<OSUploadedFile> OSUploadedFiles { get; set; }
You are trying to add to a null/unreferenced/not initialized object/list. Initialize first the list
List<OSUserData> userData1 = new List<OSUserData>();
Then add it
var user = db.sp_GetUserData_ByUserName(model.UserName.Trim()).FirstOrDefault();
userData1.Add(new OSUserData{
Prop1 = user.Prop1,
Prop2 = user.Prop2,
......
});
Or if you only want one user, just make it var
var user = db.sp_GetUserData_ByUserName(model.UserName.Trim()).FirstOrDefault();
I wanted to eager load a collection but it does not returns any data
I have tried nothing
//here is my controller
var accountGroup = await db.AccountGroups.Include(a=>a.AccountGroupTypes)
.Include(a=>a.AccountPrimaryGroups).ToListAsync();
//here is my model
public int? Id { get; set; }
public string Name { get; set; }
public int AccountGroupTypeId { get; set; }
public ICollection<AccountGroupType> AccountGroupTypes { get; set; }
public int AccountPrimaryGroupId { get; set; }
public ICollection<AccountPrimaryGroup> AccountPrimaryGroups { get; set; }
public DateTime CreationDateUtcNow{ get; set; }
It returns AccountGroupData but It does not return AccountGroupTypes and AccountPrimaryGroup data
Mark your AccountGroupTypes and AccountPrimaryGroups as virtual properties and be sure that you have a parameterless constructor which is initializing those properties.
public int? Id { get; set; }
public string Name { get; set; }
public int AccountGroupTypeId { get; set; }
public vitual ICollection<AccountGroupType> AccountGroupTypes { get; set; }
public int AccountPrimaryGroupId { get; set; }
public virtual ICollection<AccountPrimaryGroup> AccountPrimaryGroups { get; set; }
public DateTime CreationDateUtcNow{ get; set; }
public AccountGroup()
{
this.AccountGroupTypes = new HashSet<AccountGroupType>();
this.AccountPrimaryGroups = new HashSet<AccountPrimaryGroups>();
}
I have asked question in a different post, but seems that was not the right question, so going to reword here:
I have three classes:
public class StateLog : BaseModel
{
public Guid StateLogId { get; set; }
public Guid LookupMasterId { get; set; }
public Guid EntityId { get; set; }
public string Discriminator { get; set; }
public bool IsActive { get; set; }
public virtual LookupMaster State { get; set; }
}
Second class:
public class ApplicationState : StateLog
{
[Column("EntityId")]
public Guid ApplicationId { get; set; }
}
There is another Class DocumentStates which inherits from StateLog.
Application:
public class Application : BaseModel
{
public Guid ApplicationId { get; set; }
public Guid UserId { get; set; }
public virtual User User { get; set; }
[Required]
public Guid ApplicationTypeId { get; set; }
public bool? AuthorizedToWork { get; set; } = false;
public string Token { get; set; }
public string ApplicationTitle { get; set; }
public string WorkStartDate { get; set; }
public Nullable<DateTime> SignedAt { get; set; } = DateTime.Now;
public bool? Signed { get; set; }
public string Notes { get; set; }
public virtual ICollection<ApplicationSelfDeclaration> ApplicationSelfDeclarations { get; set; }
public virtual ICollection<ApplicationState> ApplicationStates { get; set; }
public virtual ICollection<StateLog> StateLogs { get; set; }
}
I am trying to save statelogs for both application and documents in same table and based on Discriminator, fetch data.
E.g.
_context.Applications.include(a => a.ApplicationState)
This is not not working. ApplicationState should Alias EntityId column as ApplicationId. But it is not working.
Any idea what my options are at this point?
Thanks in advance.
I have 2 classes:
public class Retete
{
public Retete() { }
public int ID { get; set; }
public string Nume { get; set; }
public string Categorie { get; set; }
public string Grupa { get; set; }
public string Descriere { get; set; }
public string Ingrediente { get; set; }
public string Preparare { get; set; }
//Configure 1 to many relationship
//Foreign Key
[ForeignKey("GrupaIndivizi")]
public int GrupaID { get; set; }
[ForeignKey("GrupaID")]
public virtual GrupaIndivizi GrupaIndivizi { get; set; }
}
and
public class GrupaIndivizi
{
public GrupaIndivizi(){}
[Key]
public int GrupaID { get; set; }
public string NumeGrupa { get; set; }
public virtual ICollection<Retete> Retetes { get; set; }
}
and the table that are created
My question is how to make GrupaID from Retetes table to be a foreign Key?
One way to make a foreign key in entity framework is: beside the Id of the key you need to have an object of that type. Check if this works.
[Table("Retete")]
public class Retete
{
public Retete() { }
public int ID { get; set; }
public string Nume { get; set; }
public string Categorie { get; set; }
public string Grupa { get; set; }
public string Descriere { get; set; }
public string Ingrediente { get; set; }
public string Preparare { get; set; }
//Configure 1 to many relationship
//Foreign Key
[ForeignKey("GrupaIndivizis")]
public int GrupaIndiviziID { get; set; }
public GrupaIndivizi GrupaIndivizi { get; set; }
}
I would also recommed to get the tables some more suitable names and don't let EF generate the names. This can be done by the Table attribute.
Your FK didn't generate corectly because he was trying to bind to a GrupaIndivizi table but you have GrupaIndivizis.
i have a problem with my join in my asp.net .. i have two database tables.. named APPLICANT and Profile...they have the same fields.. meaning if the Last name in applicant is null the last name is already in profile table. I already connect my program to the applicant table.. but it have so many null fields that have to fetch from the profile data table.... sorry i'm new in asp.net ...
Here's my code in controller:
public View Result Index()
{
var applicants = (from a in db.APPLICANTs
select a).ToList();
return View(applicants);
}
heres my context:
public partial class APPLICANT
{
public int APPLICANT_ID { get; set; }
public Nullable<int> Profile_id { get; set; }
public string APPLICANT_LastName { get; set; }
public string APPLICANT_FirstName { get; set; }
public string APPLICANT_MiddleName { get; set; }
public string APPLICANT_Address { get; set; }
public string APPLICANT_City { get; set; }
public string APPLICANT_ZipCode { get; set; }
public string APPLICANT_Phone { get; set; }
public string APPLICANT_Email { get; set; }
}
public partial class Profile
{
public int PROFILE_ID { get; set; }
public string Applicant_LASTNAME { get; set; }
public string Applicant_FIRSTNAME { get; set; }
public string Applicant_MIDDLENAME { get; set; }
public string Applicant_EMAIL { get; set; }
public string Applicant_PHONE { get; set; }
public string Applicant_ADDRESS { get; set; }
public string Applicant_ZIPCODE { get; set; }
public string Applicant_CITY { get; set; }
}
thanks for those who can help my problem..