I am creating a private distribution app and I am wondering if it is possible, using any methods or private API's, to open my app when a bluetooth connection has been made.
What I have discovered so far is that with iOS 7 and the ability to use iBeacons you can enter into bluetooth proximity and you can have your app send a notification to allow the user to then open the app.
What I am hoping to do then is have the app running in the background and listen for an iBeacon connection and, if one has been made, actually launch the app without the users control instead of just sending a notification.
I realize this would never be allowed publically, however is there anything private I can look at to achieve this without jailbreaking? I know to launch some apps you can do [[UIApplication sharedApplication] openURL:[NSURL URLWithString:url]]; however I want my app to listen for an iBeacon and then open itself up.
Is there any way or work around to achieve this?
Moving app from background to foreground without user interaction is pain in the ass. Sorry, don't have a solution, just want to share some information:
I asked the same question here and posted a bounty on it and got no good response:
Show some UI from background in audio player or VOIP app on iOS
At some moment I found a solution with the help of another person. It was based on usage of GSEvent (sending clicks to UI). You can look following questions. However, as I know, in iOS 7 these API became protected by entitlement. So, this method is dead (most likely).
Using GraphicsServices.h/GSEvent as well as compiling CLI iPhone tools with Xcode
Use GSEvent to send touch event,but it's invalid.
Simulating System Wide Touch Events on iOS
iPhone, how to fire a button event in programmatically
Apps can use region monitoring to be notified when the user crosses geographic boundaries or when the user enters or exits the vicinity of a beacon. While a beacon is in range of the user’s device, apps can also monitor for the relative distance to the beacon.
In iOS, regions associated with your app are tracked at all times, including when your app is not running. If a region boundary is crossed while an app is not running, that app is relaunched into the background to handle the event. Similarly, if the app is suspended when the event occurs, it is woken up and given a short amount of time (around 10 seconds) to handle the event. When necessary, an app can request more background execution time.
For detailed info:
https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/LocationAwarenessPG/RegionMonitoring/RegionMonitoring.html#//apple_ref/doc/uid/TP40009497-CH9-SW1
There are two scenarios: you either want users to be able to do something with your device other then use your app, or you want them to always be locked into your app.
In the former case you should trust user. Just show the push, timer or location notification and let them decide to launch the app or not.
In the latter case just lock the device using guided access mode.
Related
i want to wake up my app after app terminated using background modes...
i know using location update and push notifications we can do.but i don't to use those. apart from those is their any way to wakeup my app.
actually i need to connect my app with websocket even app was terminated.
is their any way to wakeup app using core motions. or using microphone(i mean if app catches any data of voice(sound))..
can any one explain app life cycle (when it will wakeup and when it will sleep)
thanks u
Even if there is a way (actually there are some tricks with beacons but user would have to be in the range of beacon specified by you) it shouldn't be used like so.
If your app is kind of weather service or newsfeed, iOS device will be woken up at intervals specified by you (not less than 1h) to check for necessary data.
Using microphone or core motion to wake up your app probably won't pass apple review.
To fully answer your question I would have to know reason for background mode.
According to your requirement "i need to track device motion activity", you could use the queryActivityStarting() provided by apple API's.
This gathers and returns historical motion data for the specified time period:
let activityManager = CMMotionActivityManager()
activityManager.queryActivityStarting(from: lastTimeAppCollectedData, to: now, to: queue) { (activities, error) in}
This returns you an array of activities/error that happened in the given period
It still wont wake your app up, but will allow you to query the events after they happened.
You can use CLRegion for geofencing as soon as user exit the region boundary, your app will get open with didExit delegate of CLRegion and after that you can use startActivityUpdates of CMMotionActivityManager to keep your app open till you want.
Resources:
Region Monitoring
No once app is terminated you don't have any access to app until app is opened by user. Even location update and push notifications only work in background.
I want to create an iOS app using React Native. One of the primary features of the app is that it runs constantly in the background. It also requires using GPS btw (in case that is important).
I have had a number of devs tell me its not possible to do this for iOS, however I have read that it is do-able.
Is this possible to do in the iOS environment? Mainly, if the app is running when the phone is powered off, can you make it open when the device is restarted without the user opening it?
I should say that I am a RN novice and any help is much appreciated.
If your app gets permission to get location while it's not in the foreground, then you will get periodic updates and some time to process it.
For example, if you are giving driving directions.
https://developer.apple.com/library/content/documentation/UserExperience/Conceptual/LocationAwarenessPG/CoreLocation/CoreLocation.html#//apple_ref/doc/uid/TP40009497-CH2-SW10
If there is no good user benefit for you to get the location in the background constantly, you might be rejected. Apple suggests region monitoring instead
iOS supports the delivery of location events to apps that are suspended or no longer running. The delivery of location events in the background supports apps whose functionality would be impaired without them, so configure your app to receive background events only when doing so provides a tangible benefit to the user. For example, a turn-by-turn navigation app needs to track the user’s position at all times and notify the user when it’s time to make the next turn. If your app can make do with alternate means, such as region monitoring, it should do so.
I have no idea how RN wraps this behavior, but no matter what it does (or what a plugin might do), the core iOS behavior is how it is described in that URL.
I verified yesterday (at least on iOS 11.2 simulator) that automatically restarting the app (and the location tracking) after phone reboot works.
The key point is that startMonitoringSignificantLocationChanges needs to be on to wake up the app after reboot. For me the difficult part was figuring out when to turn it on, because I couldn't find a reliable way to detect when the phone is being rebooted or run any code at that point. However, based on initial testing it looks like startMonitoringSignificantLocationChanges is independent and doesn't negatively impact the usual location updates, so now I just leave it on all the time and toggle startUpdatingLocation / stopUpdatingLocation on top of it based on Core Motion-detected activity.
Otherwise requirements are the same as for any location tracking on the background, i.e. handle permissions and don't process too much. Apple documentation explains how to detect that the app was relaunched by a location event.
Here's a react native module which basically helps you achieve what you're describing: https://github.com/transistorsoft/react-native-background-geolocation
I have an app that monitors iBeacons entry/exit events. When it receives an event it forwards the event off to a server. The app continues to work (e.g., the server continues to receive updates) after the user minimizes and/or force closes it (so it works correctly in the background).
However, after a phone has been away from any iBeacons for a sufficient amount of time (e.g., overnight) and is brought near iBeacons again, the app stops receiving enter/exit updates until the user opens it up again (brings it into the foreground). If the user minimizes/closes the app at that point, updates continue to work correctly in the background.
Is anything that I need to do to allow long running monitoring updates in the background? After a while does iOS stop background monitoring?
Note: I am running iOS 9.3.1
iOS Apps are supposed to be able to detect beacons indefinitely in the background when they have been granted "always" location access.
This is the second report I have heard like this, so I wonder if it is a bug or a change in a new iOS version. Reporting your iOS version would be helpful.
One possibility: the network calls may be being blocked and not the beacon detections. You could test this hypothesis by adding NSLog statements to :
Log on beacon detection
Log on successful and unsuccessful connection to the server.
Once you add the above, reproduce the issue where you don't see events on your server. Then connect your phone to XCode and go to Devices, and look at the recent NSLog output to see:
Is there a line indicating the beacon was detected?
Was the server connection successful or not?
If you find it is the network connection that is failing, you may be able to correct the situation by requesting additional background network permissions.
EDIT: One other thing you might try when a detection is not made is launching a different beacon scanner app in the foreground like Locate. This will force an OS bluetooth scan and it might kick off your app's detection. If this works, it would tell you that bluetooth scanning had been suspended across the phone.
From http://blog.venmo.com/hf2t3h4x98p5e13z82pl8j66ngcmry/2014/7/8/introducing-background-nearby-with-ibeacons, they suggest that they were able to forcibly bring app into the foreground:
"Whenever a device enters a beacon region, it briefly launches the Venmo app into the foreground in order to broadcast its peer identifier over the MPC framework, thus establishing a Nearby connection. In other words, whenever our users open Venmo to pay or charge the people they are around, they can instantly emit a beacon signal that momentarily wakes up their friends’ devices to connect and populate the user's Nearby drawer."
Every post on here about this suggests this isn't possible. Can someone explain?
I suspect that "foreground" is a simplification and that Venmo actually takes advantage of the iOS location background capabilities (the iOS location background mode is also applicable to iBeacon); meaning the app doesn't actually enter the foreground, but is launched into the background to complete the necessary tasks even if the app has been terminated.
Here's a bit of info from the docs about iBeacon background usage: https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammingGuide/BackgroundExecution/BackgroundExecution.html#//apple_ref/doc/uid/TP40007072-CH4-SW7
How does Navita https://itunes.apple.com/us/app/navita-t.e.m.-personal/id590228620?mt=8
manage to display a call log?
If I swipe the app out of the task manager then it misses the calls, this indicates that it must presumably be using CTCallCenter's callEventHandler and is creating its own call log by saving the time/duration in response to the callEventHandler callbacks.
However if that is the case then how does it manage to do this in the background? I was under the impression that callEventHandler can only be used by apps in the foreground and not in the background?
The app is using location services, however even after disabling this it was still able to get information about the calls (provided the app isn't suspended). I though it might be using background location updates to keep itself primed to receive callEventHandler callbacks but apparently not.
The Navita app is additionally able to display call time and call duration.
The bounty will be awarded to an answer which contains sufficient, accurate and detailed information that enables me to emulate the behavior of the Navita app, specifically I must be able to write an app that can obtain the time and duration of a phone call that occurred while the app was not in the foreground, while the device's location services was turned off, and after the app had been in the background longer than the ~3 minutes granted by using beginBackgroundTaskWithExpirationHandler:
Here is what I observe with the Navita app that I want to be able to reproduce:
1) Run app
2) Task away from app
3) Go to device settings, privacy, and turn off Location Services.
4) Go to device settings, privacy, background app refresh and turn off for the app
5) Wait > 10 minutes to make sure the app is not still in the background as a consequence of using beginBackgroundTaskWithExpirationHandler:
6) Call the device from another phone, answer the phone call, then hang up.
7) Launch the app again and display the call time and duration
(This is iOS7 and unjailbroken)
Here is what I've found from Navita TEM disassembly and it's resources.
Application uses two background modes - location and audio. You can see it in the Info.plist file. When you enable phone calls logging application will also enable "alerts" and "Real-time" switches. When "alerts" enabled application infinitely loops in background "bg-sound.mp3" file which has no sound, it's just silence. Because of that it doesn't use hacks like this one How to get a call event using CTCallCenter:setCallEventHandler: that occurred while the app was suspended? . It's similar trick to location used in order to keep the app running in background and receive phone call events. Somehow this was not rejected from the AppStore.
If you are observing the call center while the app is in the background you get a set of updates when the app is brought back to the foreground. This set of data may not be as accurate as if the app had been mostly in the foreground but it does include quite a bit of info.